- Move some information out of the SYNOPSIS section because it is formated
in a broken way by mandoc(1) otherwise.
- Improve the formatting of the list of provided ioctls.
- Use "Fa" for struct fields.
- Pet mandoc and igor.
- Fix typos.
Reviewed by: kevans
Approved by: mat (mentor)
Differential Revision: https://reviews.freebsd.org/D16765
For use with things like BOOT_TAG=\"\" -- there are valid reasons to allow
empty strings, especially as these are usually being passed through as
options. The same argument could perhaps be made for the unquoted
variant in things like MODULES_OVERRIDE="", but it's not immediately clear
that this is an issue so I've left it untouched.
MFC after: 3 days
to fit in only direct blocks whose size is exactly a multiple of the
filesystem block size.
Reported by: Peter Holm
Tested by: Peter Holm
Sponsored by: Netflix
If we can't find a Makefile.inc1 in the specified / default SOURCEDIR, and
there's a Makefile.inc1 in the current directory, offer the user the choice
of using . for SOURCEDIR.
Differential Revsion: https://reviews.freebsd.org/D16709
If an exception or NMI occurs before CPU switched to a pmap different
from vmspace0, PCPU kcr3 is left zero for pti config, which causes
triple-fault in the handler.
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
However, for post-install configuration, bsdinstall
is not of much use. Point the user to bsdconfig instead.
Reviewed by: 0mp, bcr
Approved by: 0mp, bcr
Differential Revision: https://reviews.freebsd.org/D16751
Remove a bunch of special cases for UEFI and serial consoles. We do
want to do curses and menu things here. This makes us match what we do
in FORTH, with the possible exception of boxes around menus.
Differential Revision: https://reviews.freebsd.org/D16816
The original commit added granularity to the transaction latency display
in the extended device stats mode, but didn't update the man page.
Reported by: Miroslav Lachman <000.fbsd@quip.cz> via jmg
MFC after: 1 day
reassembly inbound tcp segments. The old algorithm just blindly
dropped in segments without coalescing. This meant that every
segment could take up greater and greater room on the linked list
of segments. This of course is now subject to a tighter limit (100)
of segments which in a high BDP situation will cause us to be a
lot more in-efficent as we drop segments beyond 100 entries that
we receive. What this restructure does is cause the reassembly
buffer to coalesce segments putting an emphasis on the two
common cases (which avoid walking the list of segments) i.e.
where we add to the back of the queue of segments and where we
add to the front. We also have the reassembly buffer supporting
a couple of debug options (black box logging as well as counters
for code coverage). These are compiled out by default but can
be added by uncommenting the defines.
Sponsored by: Netflix Inc.
Differential Revision: https://reviews.freebsd.org/D16626
This has two advantages:
1) We no longer create lots of empty directories that are not needed
2) This is a requirement for building on non-FreeBSD hosts since mtree will
only exist after the bootstrap-tools phase there.
Aproved By: jhb (mentor)
Differential Revision: https://reviews.freebsd.org/D16773
The assembly files use directives that only work for ELF targets so skip
them when bootstrapping on MacOS.
Reviewed By: imp
Approved By: jhb (mentor)
Differential Revision: https://reviews.freebsd.org/D14247
This can cause surprising errors if the build tools is built against
headers that don't match the host system. It is also required in order
to allow building on non-FreeBSD systems where the headers in
/usr/include/sys are usually completely incompatible with those in the
source tree.
I added an error to Makefile.boot if this is done and found this was
only the case in libnv. With this error in the Makefile ABI breakages
such as r336019 should no longer be possible.
Reviewed By: bdrewery, kevans
Approved By: jhb (mentor)
Differential Revision: https://reviews.freebsd.org/D16186
Using find -s will not work with the Linux or MacOS find command. We pipe
to sort instead since the only real requirement here is that the order
stays the same. While I am touching this file I also fixed a `==` construct
which is not supported by POSIX sh but appears to work on FreeBSD.
Reviewed By: imp
Approved By: jhb (mentor)
Differential Revision: https://reviews.freebsd.org/D14246
It was #ifdef'd out in the 4.4BSD import and hasn't been re-enabled
since then.
Reviewed by: kib
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D16804
Now that a complete set is written, save for one describing loader.lua,
install all of them. This was not previously done as they were written to
hopefully avoid confusion as bits and pieces of the overall system were
undocumented.
This will only work if the caller already handles SIGSYS, which is not
always the case.
Address this by checking osreldate instead. Note that because there
was not __FreeBSD_version bump when the system call was added, use
1200061 (r332100) which is the first bump after the introduction of
the system call.
PR: 230762
Reported by: Jenkins via Mark Millard
Reviewed by: cem
Differential Revision: https://reviews.freebsd.org/D16807
has SMP enabled, lines can get intermixed with other console output
making these lines hard to read...
Reviewed by: manu
Differential Revision: https://reviews.freebsd.org/D16689
This is an amalgam of a patch by Doug Ambrisko to
generalize uart_acpi_find_device, imp moving the
ACPI table to uart_dev_ns8250.c and advice by jhb
to work around a bug in the EPYC 3151 BIOS
(the BIOS incorrectly marks the serial ports as
disabled)
Reviewed by: imp
MFC after: 8 weeks
Differential Revision: https://reviews.freebsd.org/D16432
This is effectively a merge from amd64 of r312888, r323235, and r333486.
I've been running this on my POWER9 Talos for some time now with no ill
effects.
Suggested by: mjg
Recent DTS use the syscon for the emac controller.
We support this but since U-Boot is still using old DTS it was never
needed for us to add this support, but this is a problem when using upstream
recent DTS and will be when U-Boot will catch up.
While here add a new compatible to the aw_syscon driver as Linux changed it ...
Current mitigation for L1TF in bhyve flushes L1D either by an explicit
WRMSR command, or by software reading enough uninteresting data to
fully populate all lines of L1D. If NMI occurs after either of
methods is completed, but before VM entry, L1D becomes polluted with
the cache lines touched by NMI handlers. There is no interesting data
which NMI accesses, but something sensitive might be co-located on the
same cache line, and then L1TF exposes that to a rogue guest.
Use VM entry MSR load list to ensure atomicity of L1D cache and VM
entry if updated microcode was loaded. If only software flush method
is available, try to help the bhyve sw flusher by also flushing L1D on
NMI exit to kernel mode.
Suggested by and discussed with: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D16790
Uncovered while writing the documentation from this, we previously
explicitly fell back to orb or orbbw if an invalid or incompatible logodef
was selected -- in contrast to branddefs, which have an exported variable
that one can whip up a quick local.lua to override in a safe manner that
works regardless of whether or not loader.conf(5) successfully loads.
These are less controversial than the others, thus done in a separate
commit. These are all used internally and ways to override are provided via
soon-to-be-documented API or loader.conf(5) variables.
Ideally, all of the functionality to revamp the loader screen has associated
APIs that are flexible enough that third-party scripts wouldn't need to
override these.
Turns out there was a hidden dependency we hasn't counted upon. The
host load /boot/userboot.so to boot the VMs it runs. This means that
the change to lua meant suddently that nobody could run their older
VMs because LUA wasn't in 10.0, last month's HardenedBSD, 11.2 or
whatever. Even more than for the /boot/loader* binaries, we need a
good coexistance strategy for this. While that's being designed and
implemented, drop back to always 4th for userboot.so. This will fail
safe in all but the most extreme environments (but lua-only hacks
to .lua files won't be processes in VMs until we fix it).
Differential Review: https://reviews.freebsd.org/D16805
ObsoleteFiles.inc:
Remove manual pages for arc4random_addrandom(3) and
arc4random_stir(3).
contrib/ntp/lib/isc/random.c:
contrib/ntp/sntp/libevent/evutil_rand.c:
Eliminate in-tree usage of arc4random_addrandom().
crypto/heimdal/lib/roken/rand.c:
crypto/openssh/config.h:
Eliminate in-tree usage of arc4random_stir().
include/stdlib.h:
Remove arc4random_stir() and arc4random_addrandom() prototypes,
provide temporary shims for transistion period.
lib/libc/gen/Makefile.inc:
Hook arc4random-compat.c to build, add hint for Chacha20 source for
kernel, and remove arc4random_addrandom(3) and arc4random_stir(3)
links.
lib/libc/gen/arc4random.c:
Adopt OpenBSD arc4random.c,v 1.54 with bare minimum changes, use the
sys/crypto/chacha20 implementation of keystream.
lib/libc/gen/Symbol.map:
Remove arc4random_stir and arc4random_addrandom interfaces.
lib/libc/gen/arc4random.h:
Adopt OpenBSD arc4random.h,v 1.4 but provide _ARC4_LOCK of our own.
lib/libc/gen/arc4random.3:
Adopt OpenBSD arc4random.3,v 1.35 but keep FreeBSD r114444 and
r118247.
lib/libc/gen/arc4random-compat.c:
Compatibility shims for arc4random_stir and arc4random_addrandom
functions to preserve ABI. Log once when called but do nothing
otherwise.
lib/libc/gen/getentropy.c:
lib/libc/include/libc_private.h:
Fold __arc4_sysctl into getentropy.c (renamed to arnd_sysctl).
Remove from libc_private.h as a result.
sys/crypto/chacha20/chacha.c:
sys/crypto/chacha20/chacha.h:
Make it possible to use the kernel implementation in libc.
PR: 182610
Reviewed by: cem, markm
Obtained from: OpenBSD
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D16760
The MPTable probe code was using PMAP_MAP_LOW as the PA -> VA offset
when searching for the table signature but still using KERNBASE once
it had found the table. As a result, the mpfps table pointed into a
random part of the kernel text instead of the actual MP Table.
Rather than adding more #ifdef's, use BIOS_PADDRTOVADDR from
<machine/pc/bios.h> which already uses PMAP_MAP_LOW on i386 and KERNBASE
on amd64.
Reviewed by: kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D16802
