Gather all the IRQ definitions to interrupt.h. Earlier these were in xlp.h
and pic.h. Update the definition of XLP_IRQ_IS_PICINTR to check for last
irq as well.
bfd_dwarf2_find_line() calls find_line() with NULL functionname_ptr,
which resulted in a crash on certain ELF objects.
This change was implemented independently from upstream binutils, but
I have checked that the crash does not happen there.
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
This can occur when DW_AT_specification is used to refer to another DIE
that provides the actual DW_AT_name string. For example:
< 3><0x00000086> DW_TAG_subprogram
DW_AT_name PrettyStackTraceEntry
...
< 1><0x00002cf4> DW_TAG_subprogram
DW_AT_specification <0x00000086>
We will need to add support for DW_AT_specification, but in the interim
we should not segfault.
Obtained from: Elftoolchain (r3170)
Sponsored by: The FreeBSD Foundation
declares support for it. Newer versions of Xen works fine with x2APIC
code, but e.g. Xen 4.2 delivers GPF on the LAPIC MSR write, despite
x2APIC mode being known to hypervisor.
Discussed with: royger
Sponsored by: The FreeBSD Foundation
Errors from _thr_umutex_unlock2 should "never happen" in normal
circumstances. If they do, however, return them to the application
so it can fail early and loudly. Hiding the errors will only delay
the inevitable failure, making it harder to find and diagnose.
Submitted by: Eric van Gyzen <eric_van_gyzen@dell.com>
Obtained from: Dell Inc.
PR: 198914
MFC after: 1 week
to its previous, unowned state. This avoids compounding an existing
problem of inconsistent ownership.
Submitted by: Eric van Gyzen <eric_van_gyzen@dell.com>
Obtained from: Dell Inc.
PR: 198914
MFC after: 1 week
is empty, look up the umtx_pi and disown it if the current thread owns it.
This can happen if a signal or timeout removed the last waiter from
the queue, but there is still a thread in do_lock_pi() holding a reference
on the umtx_pi. The unlocking thread might not own the umtx_pi in this case,
but if it does, it must disown it to keep the ownership consistent between
the umtx_pi and the umutex.
Submitted by: Eric van Gyzen <eric_van_gyzen@dell.com>
with advice from: Elliott Rabe and Jim Muchow, also at Dell Inc.
Obtained from: Dell Inc.
PR: 198914
of packets. When the data payload length excluding any headers, of an
outgoing IPv4 packet exceeds PAGE_SIZE bytes, a special case in
ip_fragment() can kick in to optimise the outgoing payload(s). The
code which was added in r98849 as part of zero copy socket support
assumes that the beginning of any MTU sized payload is aligned to
where a MBUF's "m_data" pointer points. This is not always the case
and can sometimes cause large IPv4 packets, as part of ping replies,
to be split more than needed.
Instead of iterating the MBUFs to figure out how much data is in the
current chain, use the value already in the "m_pkthdr.len" field of
the first MBUF in the chain.
Reviewed by: ken @
Differential Revision: https://reviews.freebsd.org/D1893
MFC after: 2 weeks
Sponsored by: Mellanox Technologies
any applications which need unpredictable random numbers, not merely those
which are cryptographic in nature.
If you work for a lottery and you're using random(3) to select the winning
numbers, please let me know.
lib/libmt/mtlib.c:
In mt_start_element(), make sure we don't overflow the
cur_sb array. CID 1271325
usr.bin/mt/mt.c:
In main(), bzero the mt_com structure so that we aren't
using any uninitialized stack variables. CID 1271319
In mt_param(), only allow one -s and one -p argument. This
will prevent a memory leak caused by overwriting the
param_name and/or param_value variables. CID 1271320 and
CID 1271322
To make things simpler in mt_param(), make sure there
there is only one exit path for the function. Make sure
the arguments are explicitly freed.
Sponsored by: Spectra Logic
Pointed out by: emaste
MFC after: 1 month
post-install packaging cloud provider images.
Add a 'gce-package.sh' script to generate the final output
image ready for upload to the GCE platform. Right now, this
is the only image that has a specific output format (GNU-tar),
and this implementation is expected to be temporary.
This is not directly connected to the other release targets.
MFC after: 1 week
X-MFC-with: r279249, r279250
Sponsored by: The FreeBSD Foundation
dates.
- Changed all of the PCI device strings from LSI to Avago Technologies (LSI).
- Added a sysctl variable to control how StartStopUnit behavior works. User can
select to spin down disks based on if disk is SSD or HDD.
- Inquiry data is required to tell if a disk will support SSU at shutdown or
not. Due to the addition of mpssas_async, which gets Advanced Info but not
Inquiry data, the setting of supports_SSU was moved to the
mpssas_scsiio_complete function, which snoops for any Inquiry commands. And,
since disks are shutdown as a target and not a LUN, this process was
simplified by basing it on targets and not LUNs.
- Added a sysctl variable that sets the amount of time to retry after sending a
failed SATA ID command. This helps with some bad disks and large disks that
require a lot of time to spin up. Part of this change was to add a callout to
handle timeouts with the SATA ID command. The callout function is called
mpssas_ata_id_timeout(). (Fixes PR 191348)
- Changed the way resets work by allowing I/O to continue to devices that are
not currently under a reset condition. This uses devq's instead of simq's and
makes use of the MPSSAS_TARGET_INRESET flag. This change also adds a function
called mpssas_prepare_tm().
- Some changes were made to reduce code duplication when getting a SAS address
for a SATA disk.
- Fixed some formatting and whitespace.
- Bump version of mps driver to 20.00.00.00-fbsd
PR: 191348
Reviewed by: ken, scottl
Approved by: ken, scottl
MFC after: 2 weeks
this change is to improve concurrency:
- Drop global state stored in the shadow overflow page table (and all other
global state)
- Remove all global locks
- Use per-PTE lock bits to allow parallel page insertion
- Reconstruct state when requested for evicted PTEs instead of buffering
it during overflow
This drops total wall time for make buildworld on a 32-thread POWER8 system
by a factor of two and system time by a factor of three, providing performance
20% better than similarly clocked Core i7 Xeons per-core. Performance on
smaller SMP systems, where PMAP lock contention was not as much of an issue,
is nearly unchanged.
Tested on: POWER8, POWER5+, G5 UP, G5 SMP (64-bit and 32-bit kernels)
Merged from: user/nwhitehorn/ppc64-pmap-rework
Looked over by: jhibbits, andreast
MFC after: 3 months
Relnotes: yes
Sponsored by: FreeBSD Foundation
It is disabled by default but users can set IFCAP_TXCSUM on the
netmap ifnet (ifconfig ncxl0 txcsum) to override netmap and force
the hardware to calculate and insert proper IP and L4 checksums in
outbound frames.
MFC after: 2 weeks
disk images to a directory within DESTDIR.
Add CLOUDINSTALL variable to automatically generate the
actual list of install targets. While here, rename the
cloud-specific names from 'vm-' to 'cw-' to avoid naming
collisions.
Add AZURE_DISK, GCE_DISK, and OPENSTACK_DISK output file
variables.
Add 'cloudware-install' to the 'install' target.
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
This avoids various failure modes (e.g., when building and installing a
single binary with debug data on a system that otherwise does not have
it enabled).
It is also consistent with the way other directory hierarchies are
handled (e.g. share/man).
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D1962
replace it with the absolute path of .PARSEDIR, so that sub-makes
launched from objdirs (eg kernel) can still find the correct mk files.
Reviewed by: obrien
