Use the SUNW,{d,i}tlb-load methods for entering locked TLB entries like
OpenBSD and OpenSolaris do instead of fiddling with the MMUs ourselves.
Unlike direct access the firmware methods don't automatically use the
next free (?) TLB slot, instead the slot to be used has to be specified.
We allocate the TLB slots for the kernel top-down as OpenSolaris suggests
that the firmware will always allocate the ones for its own use bottom-up.
Besides being simpler, according to OpenBSD using the firmware methods is
required to allow booting on Sun Fire E10K with multi-systemboard domains.
- Assert that HEAPSZ is a multiple of PAGE_SIZE as at least the firmware
of Sun Fire V1280 doesn't round up the size itself but instead lets
claiming of non page-sized amounts of memory fail.
- Change parameters and variables related to the TLB slots to unsigned
which is more appropriate.
- Search the whole OFW device tree instead of only the children of the
root nexus device for the BSP as starting with UltraSPARC IV the 'cpu'
nodes hang off of from 'cmp' (chip multi-threading processor) or 'core'
or combinations thereof. Also in large UltraSPARC III based machines
the 'cpu' nodes hang off of 'ssm' (scalable shared memory) nodes which
group snooping-coherency domains together instead of directly from the
nexus.
- Add support for UltraSPARC IV and IV+ BSPs. Due to the fact that these
are multi-core each CPU has two Fireplane config registers and thus the
module/target ID has to be determined differently so the one specific
to a certain core is used. Similarly, starting with UltraSPARC IV the
individual cores use a different property in the OFW device tree to
indicate the CPU/core ID as it no longer is in coincidence with the
shared slot/socket ID.
While at it additionally distinguish between CPUs with Fireplane and
JBus interconnects as these also use slightly different sizes for the
JBus/agent/module/target IDs.
- Check the return value of init_heap(). This requires moving it after
cons_probe() so we can panic when appropriate. This should be fine as
the PowerPC OFW loader uses that order for quite some time now.
- Remove the BUS_HANDLE_MIN checking in the __BUS_DEBUG_ACCESS macro;
for UPA it should have fulfilled its purpose by now and Fireplane-
and JBus-based machines are way to messy in organization to implement
something equivalent.
- Fix a bunch of style(9) bugs.
- Const'ify the bus_stream_asi and bus_type_asi arrays.
- Replace hard-coded functions names missed in bus_machdep.c with __func__.
- Break some long lines.
- While SPARC V9 allows tininess to be detected either before or after
rounding (impl. dep. #55), the SPARC JPS1 responsible for SPARC64 and
UltraSPARC processors defines that in all cases tinyness is detected
before rounding, therefore rounding up to the smallest normalised
number should set the underflow flag.
- If an infinite result is rounded down, the result should have an
exponent 1 less than the value for infinity.
PR: 144900
Submitted by: Peter Jeremy
Division should take both arguments' signs into account when the
the dividend is infinity or zero and the divisor is not the same.
PR: 144900
Submitted by: Peter Jeremy
Checkin a facility for specifying a passthrough FIB from userland.
arcconf tool by Adaptec already seems to use for identifying the
Serial Number of the devices.
Sponsored by: Sandvine Incorporated
Improving the clocks auto-tunning by firstly checking if the atrtc may be
correctly initialized and just then assign to softclock/profclock.
Sponsored by: Sandvine Incorporated
Remove GNU cpio after fix of CVE-2010-0624.
Note that this is actually a no-op for most users, as this GNU
cpio was broken on -HEAD and 8-STABLE since last March until
the recent fix.
FreeBSD 8.0+ uses BSD cpio by default and the code is being
actively maintained.
Fix stupid typos. Some VESA BIOSes directly call BIOS interrupt handlers
within the VBE interrupt handler. Unfortunately it was causing real mode
page faults because we were fetching instructions from bogus addresses.
PR: kern/144654
Handling all the three clocks with the LAPIC may lead to aliasing for
softclock and profclock.
Revert the change when the LAPIC started taking charge of all three of
them.
Sponsored by: Sandvine Incorporated
the problems related to the handling of broken DNSSEC trust chains.
This fix is only relevant for those who have DNSSEC validation
enabled and configure trust anchors from third parties, either
manually, or through a system like DLV.
r204019:
Include command type in COMMAND TIMEOUT messages to aid in debugging.
r203885:
Diff reduction with Adaptec's vendor driver.
Driver version 2.1.9 chosen as that Adaptec version roughly corresponds
with the current feature set merged to the in-tree driver.
r203801:
Garbage collect Falcon/PPC support that has not been used in released
products, based on discussion with Adaptec.
r198617:
Rename aac_srb32 to aac_srb, to match Adaptec's vendor driver.
Minor diff reduction with Adaptec's driver: in aac_release_command() set
cm_queue to AAC_ADAP_NORM_CMD_QUEUE by default. In every place it was
set, it was set to AAC_ADAP_NORM_CMD_QUEUE anyhow.
This waits for the requested process(es) to terminate, rather than polling
with an interval of 2 seconds.
If pwait is not available, the old method is used.
PR: conf/132766
Various testcases that work correctly with stable/8 sh.
Note: this creates some gaps in the numbering due to lower-numbered tests
for new functionality which is not or not yet MFC'ed.
- If lstat()/stat() fails with an error other than ENOENT, don't ignore
the error and assume that the file doesn't exist. Touch could return
success with -c option even if the file existed and time was not set.
- If the first utimes_f() call fails with -A option, give up and don't
continue trying to set times to current time. [1]
- Set exit status to 1 when setting of timestamps fails for a directory
or symbolic link even though lstat()/stat() would succeed.
- Don't print bogus error message when rw() succeeds.
PR: bin/112213
Improve descriptions, remove turnstiles (since, from what I understand,
they are only used to implement other synchronization primitives), tweak
formatting.
MFC r203127:
Add description of bounded sleep vs unbounded sleep (aka blocking). Move
rules into their own section.
MFC r203131:
Cosmetic fixes.
MFC r203759:
Improve description for Giant and mention blocking inside interrupt threads.
MFC r203762:
Start sentences with a new line.
Submitted by: brueffer
MFC r203825:
Remove list of locking primitives, which is kind of redundant, move
information about witness(9) to the section about interactions, and
expand 'contexts' table.
MFC r203929:
Some rewording and language fixes.
PR: docs/136918, docs/134074
Submitted by: Ben Kaduk <kaduk at mit dot edu>, Haven Hash <havenster at gmail dot com>
Don't add VAPPEND if the file is not being opened for writing. Note that this
only affects cases where open(2) is being used improperly - i.e. when the user
specifies O_APPEND without O_WRONLY or O_RDWR.
Reviewed by: rwatson
Add change that was somehow missed in r192586. It could manifest by
incorrectly returning EINVAL from acl_valid(3) for applications linked
against pre-8.0 libc.
Provide a set of sysctls and tunables to disable device node creation
for specific "kinds" of disk labels - for example, GPT UUIDs. Reason
for this is that sometimes, other GEOM classes attach to these device
nodes instead of the proper ones - e.g. they attach to /dev/gptid/XXX
instead of /dev/ada0p2, which is annoying.
Reviewed by: pjd (earlier version)
As statfs.f_flags are uint64_t the local variables should be as well.
We'll start noticing this with the next flag introduced as the lower
32bit are all used.
While here compare to 0 explicitly [1].
Suggested by: kib [1]
Reviewed by: kib
Print the pointer to the lock with the panic message. The previous
panic: rw lock not unlocked
was not really helpful for debugging. Now one can at least call
show lock <ptr>
form ddb to learn more about the lock.
Add ddb support to the "new" link layer code ("new-arp"):
- show all lltables [1] (optional flag to also show the llentries as well)
- show lltable <struct lltable *>
- show llentry <struct llentry *>
Add pcb reference counting to the pcblist sysctl handler functions
to ensure type stability while caching the pcb pointers for the
copyout.
Reviewed by: rwatson
Destroy TCP UMA zones (empty or not) upon network stack teardown
to not leak them, otherwise making UMA/vmstat unhappy with every
stoped vnet.
We will still leak pages (especially for zones marked NOFREE).
Reshuffle cleanup order in tcp_destroy() to get rid of what we can
easily free first.
Reviewed by: rwatson
Rework reference counting in case we queue into the netisr,
or overflow the netisr queue and fall back to the interface
queue so that we can garuantee that the ifnet pointer stays
valid. Formerly we ended up with reference counts <= 0 in
case the netisr had returned ENOBUFS. The idea is to track
any packet in the netisr queue and only change the refount
on edge operations for the fallback interface queue. This
also avoids problems in case the if_snd.ifq_len lies to us.
Also rework refount assertions to make sure they trigger if
we go below 1. Formerly a negative refence count did not
trigger the assert as the refcount variable is u_int.
Destroy UDP UMA zones (empty or not) upon network stack teardown
to not leak them making UMA/vmstat -z unhappy with every stoped vnet.
We will still leak pages (especially as zones are marked NOFREE).
Set curvnet earlier so that it also covers calls to sodisconnect(), which
before were possibly panicing the system in ULP code in the VIMAGE case.
Submitted by: Igor (igor ispsystem.com)
