- increase pmc cpuid field from 8 to 12 bits
- add cpuid version string to initialize entry in the log
so that filter can identify which counter index an
event name maps to
- GC unused config flags
- make fixed counter assignment more robust as well as the
changes needed to be properly identified for filter
file in /sys/conf, so was unavailable in configurations that don't use
modules, and was not testable or notable in NOTES. Its normal
configuration (not using a module) is still silently deprecated in
aout(4) by not mentioning it there.
Update i386 NOTES for COMPAT_AOUT. It is not i386-only, or even very MD.
Sort its entry better.
Finish gzip configuration (but not support) for amd64. gzip is really
gzipped aout. It is currently broken even for i386 (a call to vm fails).
amd64 has always attempted to configure and test it, but it depends on
COMPAT_AOUT (as noted). The bug that it depends on unconfigured files
was not detected since it is configured as a device. All other optional
image activators are configured properly using an option.
time, especially for SMP. If configured, it turns itself on at boot
time for calibration, so is fragile even if never otherwise used.
Both types of kernel profiling were supposed to use a global spinlock
in the SMP case. If hi-res profiling is configured (but not necessarily
used), this was supposed to be optimized by only using it when
necessary, and slightly more efficiently, in asm. But it was not done
at all for mcount entry where it is necessary. This caused crashes
in the SMP case when either type of profiling was enabled. For mcount
exit, it only caused wrong times. The times were wrongest with an
i8254 timer since using that requires exclusive access to the hardware.
The i8254 timer was too slow to use here 20 years ago and is much less
usable now, but it is the default for the SMP case since TSCs weren't
invariant when SMP was new. Do the locking in all hi-res SMP cases for
simplicity.
Calibration uses special asms, and the clobber lists in these were sort
of inverted. They contained the arg and return registers which are not
clobbered, but on amd64 they didn't contain the residue of the call-used
registers which may be clobbered (%r10 and %r11). This usually caused
hangs at boot time. This usually affected even the UP case.
kernel profiling remains broken).
memmove() was broken using ALTENTRY(). ALTENTRY() is only different from
ENTRY() in the profiling case, and its use in that case was sort of
backwards. The backwardness magically turned memmove() into memcpy()
instead of completely breaking it. Only the high resolution parts of
profiling itself were broken. Use ordinary ENTRY() for memmove().
Turn bcopy() into a tail call to memmove() to reduce complications.
This gives slightly different pessimizations and profiling lossage.
The pessimizations are minimized by not using a frame pointer() for
bcopy().
Calls to profiling functions from exception trampolines were not
relocated. This caused crashes on the first exception. Fix this using
function pointers.
Addresses of exception handlers in trampolines were not relocated. This
caused unknown offsets in the profiling data. Relocate by abusing
setidt_disp as for pmc although this is slower than necessary and
requires namespace pollution. pmc seems to be missing some relocations.
Stack traces and lots of other things in debuggers need similar relocations.
Most user addresses were misclassified as unknown kernel addresses and
then ignored. Treat all unknown addresses as user. Now only user
addresses in the kernel text range are significantly misclassified (as
known kernel addresses).
The ibrs functions didn't preserve enough registers. This is the only
recent breakage on amd64. Although these functions are written in
asm, in the profiling case they call profiling functions which are
mostly for the C ABI, so they only have to save call-used registers.
They also have to save arg and return registers in some cases and
actually save them in all cases to reduce complications. They end up
saving all registers except %ecx on i386 and %r10 and %r11 on amd64.
Saving these is only needed for 1 caller on each of amd64 and i386.
Save them there. This is slightly simpler.
Remove saving %ecx in handle_ibrs_exit on i386. Both handle_ibrs_entry
and handle_ibrs_exit use %ecx, but only the latter needed to or did
save it. But saving it there doesn't work for the profiling case.
amd64 has more automatic saving of the most common scratch registers
%rax, %rcx and %rdx (its complications for %r10 are from unusual use
of %r10 by SYSCALL). Thus profiling of handle_ibrs_exit_rs() was not
broken, and I didn't simplify the saving by moving the saving of these
registers from it to the caller.
Intel now provides comprehensive tables for all performance counters
and the various valid configuration permutations as text .json files.
Libpmc has been converted to use these and hwpmc_core has been greatly
simplified by moving to passthrough of the table values.
The one gotcha is that said tables don't support pentium pro and and pentium
IV. There's very few users of hwpmc on _amd64_ kernels on new hardware. It is
unlikely that anyone is doing low level optimization on 15 year old Intel
hardware. Nonetheless, if someone feels strongly enough to populate the
corresponding tables for p4 and ppro I will reinstate the files in to the
build.
Code for the K8 counters and !x86 architectures remains unchanged.
This is a follow-up to r321483, which disabled -Wmacro-redefined for
some lib/msun tests.
If an application included both fenv.h and ieeefp.h, several macros such
as __fldcw(), __fldenv() were defined in both headers, with slightly
different arguments, leading to conflicts.
Fix this by putting all the common macros in the machine-specific
versions of ieeefp.h. Where needed, update the arguments in places
where the macros are invoked.
This also slightly reduces the differences between the amd64 and i386
versions of ieeefp.h.
Reviewed by: kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D15633
pmap_is_prefaultable() and pmap_incore(), pushing the number of
shootdown IPIs back to the 3/1 kernel.
Benchmarked by: bde
Tested by: pho
Sponsored by: The FreeBSD Foundation
Create yet another temporal pte mapping routine pmap_pte_quick3(),
which is the copy of the pmap_pte_quick() and relies on the
pvh_global_lock to protect the frame. It accounts into the same
counters as pmap_pte_quick(). It is needed since pmap_copy() uses
pmap_pte_quick() already, and since a user pmap is no longer current
pmap.
pmap_copy() still provides the advantage for real-world workloads
involving lot of forks where processes do not exec immediately.
Benchmarked by: bde
Sponsored by: The FreeBSD Foundation
While at it add missing _acq_ and _rel_ variants for 64-bit atomic
operations under i386.
Reviewed by: kib @
MFC after: 1 week
Sponsored by: Mellanox Technologies
In particular, stop using pmap_pte() to read non-promoted pte while
walking the page table. pmap_pte() needs to shoot down the kernel
mapping globally which causes IPI broadcast. Since
pmap_extract_and_hold() is used for slow copyin(9), it is very
significant hit for the 4/4 kernels.
Instead, create single purpose per-processor page frame and use it to
locally map page table page inside the critical section, to avoid
reuse of the frame by other thread if context switched.
Measurement demostrated very significant improvements in any load that
utilizes copyin/copyout.
Found and benchmarked by: bde
Sponsored by: The FreeBSD Foundation
The TSC-s are checked and synchronized only if they were good
originally. That is, invariant, synchronized, etc.
This is necessary on an AMD-based system where after a wakeup from STR I
see that BSP clock differs from AP clocks by a count that roughly
corresponds to one second. The APs are in sync with each other. Not
sure if this is a hardware quirk or a firmware bug.
This is what I see after a resume with this change:
SMP: passed TSC synchronization test after adjustment
acpi_timer0: restoring timecounter, ACPI-fast -> TSC-low
Reviewed by: kib
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D15551
Make memmove the primary interface, but have bcopy be an alternative
entry point that jumps into memmove. This will slightly pessimize
bcopy calls, but those are about to get much rarer. Return dst always,
but it will be ignored by bcopy callers. We can remove just the alt
entry point if we ever remove bcopy entirely.
Differential Revision: https://reviews.freebsd.org/D15374
Instead, construct an auxargs array and copy it out all at once.
Use an array of Elf_Auxinfo rather than pairs of Elf_Addr * to represent
the array. This is the correct type where pairs of words just happend
to work. To reduce the size of the diff, AUXARGS_ENTRY is altered to act
on this array rather than introducing a new macro.
Return errors on copyout() and suword() failures and handle them in the
caller.
Incidentally fixes AT_RANDOM and AT_EXECFN in 32-bit linux on amd64
which incorrectly used AUXARG_ENTRY instead of AUXARGS_ENTRY_32
(now removed due to the use of proper types).
Reviewed by: kib
Comments from: emaste, jhb
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D15485
We certainly should clear PSL_T when calling the SIGTRAP signal
handler, which is already done by all x86 sendsig(9) ABI code. On the
other hand, there is no obvious reason why PSL_T needs to be cleared
when returning from the signal handler. For instance, Linux allows
userspace to set PSL_T and keep tracing enabled for the desired
period. There are userspace programs which would use PSL_T if we make
it possible, for instance sbcl.
Remember if PSL_T was set by PT_STEP or PT_SETSTEP by mean of TDB_STEP
flag, and only clear it when the flag is set.
Discussed with: Ali Mashtizadeh
Reviewed by: jhb (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D15054
r334005: add pc_ibpb_set as it is now referenced by common code
(although presumably not needed on i386 since it has been there
since the first spectre mitigation work on amd64)
r334009: there is no amd64 rflags -> i386 eflags
- Add constants for fields in DR6 and the reserved fields in DR7. Use
these constants instead of magic numbers in most places that use DR6
and DR7.
- Refer to T_TRCTRAP as "debug exception" rather than a "trace trap"
as it is not just for trace exceptions.
- Always read DR6 for debug exceptions and only clear TF in the flags
register for user exceptions where DR6.BS is set.
- Clear DR6 before returning from a debug exception handler as
recommended by the SDM dating all the way back to the 386. This
allows debuggers to determine the cause of each exception. For
kernel traps, clear DR6 in the T_TRCTRAP case and pass DR6 by value
to other parts of the handler (namely, user_dbreg_trap()). For user
traps, wait until after trapsignal to clear DR6 so that userland
debuggers can read DR6 via PT_GETDBREGS while the thread is stopped
in trapsignal().
Reviewed by: kib, rgrimes
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D15189
This turns on support for kernel dump encryption and compression, and
netdump. arm and mips platforms are omitted for now, since they are more
constrained and don't benefit as much from these features.
Reviewed by: cem, manu, rgrimes
Tested by: manu (arm64)
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D15465
is executed on the right stack already. No copy from the entry stack
to the kstack must be performed for vm86 bios call code to function.
To access the pcb flags on kernel entry, unconditionally switch to
kernel address space if vm86 mode is detected.
This fixes very early vm86 bios calls, typically done when boot is
performed by boot2 without loader, and kernel falls back to BIOS calls
to get SMAP.
Reported by: bde
Sponsored by: The FreeBSD Foundation
PCB_VM86CALL pcb flag not set should be treated same as return to
userspace.
Most important, the address space must be switched. This fixes
usermode vm86 operations after the 4/4 split.
Sponsored by: The FreeBSD Foundation
exception code is copied to the trampoline.
The correct value is then copied to trampoline automatically, so
tramp_idleptd_reloced can be eliminated.
This will allow to use the same exception entry code to handle traps
from vm86 bios calls on early boot stage, as after the trampoline is
configured.
Sponsored by: The FreeBSD Foundation
Record common_tssd, the descriptor to be written in GDT to point to
the common TSS, before LTR is executed. The LTR instruction sets the
loaded descriptor type to 386 TSS busy, which traps on reloads.
Sponsored by: The FreeBSD Foundation
Since pop %ss/mov %ss instructions defer all interrupts and exceptions
for the next instruction, it is possible that the userspace watchpoint
trap executes on the first instruction of the kernel entry for
syscall/bpt.
In this case, DB# should be treated similarly to NMI: on amd64 we must
always load GSBASE even if the trap comes from kernel mode, and load
the kernel page table root into %cr3. Moreover, the trap must
use the dedicated stack, because we are still on the user stack when
trapped on syscall entry.
For i386, we must reload %cr3. The syscall instruction is not configured,
so there is no issue with executing on user stack when trapping.
Due to some CPU erratas it is not always possible to detect that the
userspace watchpoint triggered by inspecting %dr6. In trap(), compare the
trap %rip with the known unsafe entry points and if matched pretend that
the watchpoint did not fire at all.
Thank you to the MSRC Incident Response Team, and in particular Greg
Lenti and Nate Warfield, for coordinating the response to this issue
across multiple vendors.
Thanks to Computer Recycling at The Working Center of Kitchener for
making hardware available to allow us to test the patch on additional
CPU families.
Reviewed by: jhb
Discussed with: Matthew Dillon
Tested by: emaste
Sponsored by: The FreeBSD Foundation
Security: CVE-2018-8897
Security: FreeBSD-SA-18:06.debugreg
Required MD bits are only provided for x86.
Reviewed by: jhb (previous version, as part of the larger patch)
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D13838
This driver was for an early and uncommon legacy PCI 10GbE for a single
ASIC, Intel 82597EX. Intel quickly shifted to the long lived ixgbe family.
Submitted by: kbowling
Reviewed by: brooks imp jeffrey.e.pieper@intel.com
Relnotes: yes
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D15234
Dumpers may wish to print messages from an initialization hook; this
change ensures that such messages aren't mixed with output from the
generic dump code.
MFC after: 1 week
Use proper method to access userspace. For now, only the slow copyout
path is implemented.
Reported and tested by: tijl (previous version)
Sponsored by: The FreeBSD Foundation
Remove auxarg_size as it was only used once right after a confusing
assignment in each of the variants of exec_copyout_strings().
Reviewed by: emaste
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D15123
This will allow to hook a ddb script to "kdb.enter.trap" event.
Previously there was no specific name for this event, so it could only
be handled by either "kdb.enter.unknown" or "kdb.enter.default" hooks.
Both are very unspecific.
Having a specific event is useful because the fatal trap condition is
very similar to panic but it has an additional property that the current
stack frame is the frame where the trap occurred. So, both a register
dump and a stack bottom dump have additional information that can help
analyze the problem.
I have added the event only on architectures that have trap_fatal()
function defined. I haven't looked at other architectures. Their
maintainers can add support for the event later.
Sample script:
kdb.enter.trap=bt; show reg; x/aS $rsp,20; x/agx $rsp,20
Reviewed by: kib, jhb, markj
MFC after: 11 days
Sponsored by: Panzura
Differential Revision: https://reviews.freebsd.org/D15093
Half of implementations always failed (returned (-1)) and they were
previously used in only one place.
Reviewed by: kib, andrew
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D15102
'bool' is preferred to 'boolean_t'. We only get the boolean_t
definition by header pollution (though the same is true for
bool). Since we use both, switch entirely to bool.
Note: We still have TRUE/FALSE instead of true/false in heavy use in
the rest of the file. These are with ints of various flavors, so
that's appropriate, even though we should eventually migrate to bool
and true/false (though the tables they are in are nicely packed with
short and wouldn't be so nicely packed with bool, another reason
to leave it alone for now).
The change makes the user and kernel address spaces on i386
independent, giving each almost the full 4G of usable virtual addresses
except for one PDE at top used for trampoline and per-CPU trampoline
stacks, and system structures that must be always mapped, namely IDT,
GDT, common TSS and LDT, and process-private TSS and LDT if allocated.
By using 1:1 mapping for the kernel text and data, it appeared
possible to eliminate assembler part of the locore.S which bootstraps
initial page table and KPTmap. The code is rewritten in C and moved
into the pmap_cold(). The comment in vmparam.h explains the KVA
layout.
There is no PCID mechanism available in protected mode, so each
kernel/user switch forth and back completely flushes the TLB, except
for the trampoline PTD region. The TLB invalidations for userspace
becomes trivial, because IPI handlers switch page tables. On the other
hand, context switches no longer need to reload %cr3.
copyout(9) was rewritten to use vm_fault_quick_hold(). An issue for
new copyout(9) is compatibility with wiring user buffers around sysctl
handlers. This explains two kind of locks for copyout ptes and
accounting of the vslock() calls. The vm_fault_quick_hold() AKA slow
path, is only tried after the 'fast path' failed, which temporary
changes mapping to the userspace and copies the data to/from small
per-cpu buffer in the trampoline. If a page fault occurs during the
copy, it is short-circuit by exception.s to not even reach C code.
The change was motivated by the need to implement the Meltdown
mitigation, but instead of KPTI the full split is done. The i386
architecture already shows the sizing problems, in particular, it is
impossible to link clang and lld with debugging. I expect that the
issues due to the virtual address space limits would only exaggerate
and the split gives more liveness to the platform.
Tested by: pho
Discussed with: bde
Sponsored by: The FreeBSD Foundation
MFC after: 1 month
Differential revision: https://reviews.freebsd.org/D14633
The miscellaneous x86 sysent->sv_setregs() implementations tried to
migrate PSL_T from the previous program to the new executed one, but
they evaluated regs->tf_eflags after the whole regs structure was
bzeroed. Make this functional by saving PSL_T value before zeroing.
Note that if the debugger is not attached, executing the first
instruction in the new program with PSL_T set results in SIGTRAP, and
since all intercepted signals are reset to default dispostion on
exec(2), this means that non-debugged process gets killed immediately
if PSL_T is inherited. In particular, since suid images drop
P_TRACED, attempt to set PSL_T for execution of such program would
kill the process.
Another issue with userspace PSL_T handling is that it is reset by
trap(). It is reasonable to clear PSL_T when entering SIGTRAP
handler, to allow the signal to be handled without recursion or
delivery of blocked fault. But it is not reasonable to return back to
the normal flow with PSL_T cleared. This is too late to change, I
think.
Discussed with: bde, Ali Mashtizadeh
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
Differential revision: https://reviews.freebsd.org/D14995
Previously linuxulator had three identical copies of
linux_exec_imgact_try. Deduplicate before adding another arch to
linuxulator.
Sponsored by: Turing Robotic Industries Inc
Differential Revision: https://reviews.freebsd.org/D14856
opt_compat.h is mentioned in nearly 180 files. In-progress network
driver compabibility improvements may add over 100 more so this is
closer to "just about everywhere" than "only some files" per the
guidance in sys/conf/options.
Keep COMPAT_LINUX32 in opt_compat.h as it is confined to a subset of
sys/compat/linux/*.c. A fake _COMPAT_LINUX option ensure opt_compat.h
is created on all architectures.
Move COMPAT_LINUXKPI to opt_dontuse.h as it is only used to control the
set of compiled files.
Reviewed by: kib, cem, jhb, jtl
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14941
So that it doesn't rely on physmap[1] containing an address below
1MiB. Instead scan the full physmap and search for a suitable address
to place the trampoline code (below 1MiB) and the initial memory pages
(below 4GiB).
Sponsored by: Citrix Systems R&D
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D14878
x86/cpu_machdep.c now needs to include elan_mmcr.h when CPU_ELAN is set.
While here, also remove the now unneeded inclusion of isareg.h in i386
and amd64 vm_machdep.c.
Reported by: lwhsu
MFC after: 14 days
X-MFC with: r331878
Because I didn't see any reason not too.
I've been making some changes to the code and couldn't help but notice
that the i386 and am64 code was nearly identical.
MFC after: 17 days
If cpu_reset() is called on an AP and if it somehow fails to wake the
BSP, then it's better to attempt the reset on the AP than just sit there
spinning on an unusable and undebuggable system.
MFC after: 16 days
The processor is "parked" in a spin-loop already and that's sufficient
for the reset. There is nothing that stop_cpus() would add here, only
extra complexity and fragility.
The original processor does not need to enable interrupts now, in fact,
it must not do that.
MFC after: 2 weeks
platforms. Original commit message as follows:
Only use CPUs in the domain the device is attached to for default
assignment. Device drivers are able to override the default assignment
if they bind directly. There are severe performance penalties for
handling interrupts on remote CPUs and this should only be done in
very controlled circumstances.
Reviewed by: jhb, kib
Tested by: pho
Sponsored by: Netflix, Dell/EMC Isilon
Differential Revision: https://reviews.freebsd.org/D14838
These have been supplanted by the MI signal information codes in
<sys/signal.h> since 7.0. The FPE_*_TRAP ones were deprecated even
earlier in 1999.
PR: 226579 (exp-run)
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D14637
assignment. Device drivers are able to override the default assignment
if they bind directly. There are severe performance penalties for
handling interrupts on remote CPUs and this should only be done in
very controlled circumstances.
Reviewed by: jhb, kib
Tested by: pho (earlier version)
Sponsored by: Netflix, Dell/EMC Isilon
Differential Revision: https://reviews.freebsd.org/D14838
Bring #includes closer to style(9) and reduce differences between the
(three) MD versions of linux_machdep.c and linux_sysvec.c.
Sponsored by: Turing Robotic Industries Inc.
i386 was changed to only require critical section around the thread
FPU state manipulations, and vm86_bioscall callers already enter
critical section for other reasons.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
ibcs2_getdents() copies a dirent structure to userland. The ibcs2
dirent structure contains a 2 byte pad element. This element is never
initialized, but copied to userland none-the-less.
Note that ibcs2 has not built on HEAD since r302095.
Submitted by: Domagoj Stolfa <ds815@cam.ac.uk>
Reported by: Ilja Van Sprundel <ivansprundel@ioactive.com>
MFC after: 3 days
Security: Kernel memory disclosure (803)
assym is only to be included by other .s files, and should never
actually be assembled by itself.
Reviewed by: imp, bdrewery (earlier)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D14180
It's preferable to have a consistent prefix. This also reduces
differences between the three linux*_sysvec.c files.
Sponsored by: Turing Robotic Industries Inc.
There's a fair amount of duplication between MD linuxulator files.
Make indentation and comments consistent between the three versions of
linux_sysvec.c to reduce diffs when comparing them.
Sponsored by: Turing Robotic Industries Inc.
Three copies of the linuxulator linux_sysvec.c contained identical
BSD to Linux errno translation tables, and future work to support other
architectures will also use the same table. Move the table to a common
file to be used by all. Make it 'const int' to place it in .rodata.
(Some existing Linux architectures use MD errno values, but x86 and Arm
share the generic set.)
This change should introduce no functional change; a followup will add
missing errno values.
MFC after: 3 weeks
Sponsored by: Turing Robotic Industries Inc.
Differential Revision: https://reviews.freebsd.org/D14665
Migrate to modern types before creating MD Linuxolator bits for new
architectures.
Reviewed by: cem
Sponsored by: Turing Robotic Industries Inc.
Differential Revision: https://reviews.freebsd.org/D14676
Nothing uses the #define's values or the types. (Some NTP code does use
an audio_info_t, but it is in #ifdef'd support for Solaris and is not
this audio_info_t).
Sponsored by: DARPA, AFRL
While there is no immediate leak, if the structure changes underneath
us, there might be in the future.
Submitted by: Domagoj Stolfa <domagoj.stolfa@gmail.com>
MFC After: 1 month
Sponsored by: DARPA/AFRL
correctly for the data contained on each memory page.
There are several components to this change:
* Add a variable to indicate the start of the R/W portion of the
initial memory.
* Stop detecting NX bit support for each AP. Instead, use the value
from the BSP and, if supported, activate the feature on the other
APs just before loading the correct page table. (Functionally, we
already assume that the BSP and all APs had the same support or
lack of support for the NX bit.)
* Set the RW and NX bits correctly for the kernel text, data, and
BSS (subject to some caveats below).
* Ensure DDB can write to memory when necessary (such as to set a
breakpoint).
* Ensure GDB can write to memory when necessary (such as to set a
breakpoint). For this purpose, add new MD functions gdb_begin_write()
and gdb_end_write() which the GDB support code can call before and
after writing to memory.
This change is not comprehensive:
* It doesn't do anything to protect modules.
* It doesn't do anything for kernel memory allocated after the kernel
starts running.
* In order to avoid excessive memory inefficiency, it may let multiple
types of data share a 2M page, and assigns the most permissions
needed for data on that page.
Reviewed by: jhb, kib
Discussed with: emaste
MFC after: 2 weeks
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D14282
imcsmb(4) provides smbus(4) support for the SMBus controller functionality
in the integrated Memory Controllers (iMCs) embedded in Intel Sandybridge-
Xeon, Ivybridge-Xeon, Haswell-Xeon, and Broadwell-Xeon CPUs. Each CPU
implements one or more iMCs, depending on the number of cores; each iMC
implements two SMBus controllers (iMC-SMBs).
*** IMPORTANT NOTE ***
Because motherboard firmware or the BMC might try to use the iMC-SMBs for
monitoring DIMM temperatures and/or managing an NVDIMM, the driver might
need to temporarily disable those functions, or take a hardware interlock,
before using the iMC-SMBs. Details on how to do this may vary from board to
board, and the procedure may be proprietary. It is strongly suggested that
anyone wishing to use this driver contact their motherboard vendor, and
modify the driver as described in the manual page and in the driver itself.
(For what it's worth, the driver as-is has been tested on various SuperMicro
motherboards.)
Reviewed by: avg, jhb
MFC after: 1 week
Relnotes: yes
Sponsored by: Panasas
Differential Revision: https://reviews.freebsd.org/D14447
Discussed with: avg, ian, jhb
Tested by: allanjude (previous version), Panasas
This deliberately breaks the API in preperation for future syscall
revisions which will remove these nonstandard members.
In an exp-run a single port (devel/qemu-user-static) was found to
use them which it did becuase it emulates system calls. This has
been fixed in the ports tree.
PR: 224443 (exp-run)
Reviewed by: kib, jhb (previous version)
Exp-run by: antoine
Sponsored by: DARPA, AFRP
Differential Revision: https://reviews.freebsd.org/D14490
No implementation of fpu_kern_enter() can fail, and it was causing needless
error checking boilerplate and confusion. Change the return code to void to
match reality.
(This trivial change took nine days to land because of the commit hook on
sys/dev/random. Please consider removing the hook or otherwise lowering the
bar -- secteam never seems to have free time to review patches.)
Reported by: Lachlan McIlroy <Lachlan.McIlroy AT isilon.com>
Reviewed by: delphij
Approved by: secteam (delphij)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D14380
Make vm_wait() take the vm_object argument which specifies the domain
set to wait for the min condition pass. If there is no object
associated with the wait, use curthread' policy domainset. The
mechanics of the wait in vm_wait() and vm_wait_domain() is supplied by
the new helper vm_wait_doms(), which directly takes the bitmask of the
domains to wait for passing min condition.
Eliminate pagedaemon_wait(). vm_domain_clear() handles the same
operations.
Eliminate VM_WAIT and VM_WAITPFAULT macros, the direct functions calls
are enough.
Eliminate several control state variables from vm_domain, unneeded
after the vm_wait() conversion.
Scetched and reviewed by: jeff
Tested by: pho
Sponsored by: The FreeBSD Foundation, Mellanox Technologies
Differential revision: https://reviews.freebsd.org/D14384
Many licenses on Linuxolator files contained small variations from the
standard FreeBSD license text. To avoid license proliferation switch to
the standard 2-clause FreeBSD license for those files where I have
permission from each of the listed copyright holders. Additional files
waiting on permission from others are listed in review D14210.
Approved by: kan, marcel, sos, rdivacky
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
The idea is, the pmap_qenter() API is now defined to not produce executable
mappings. If you need executable mappings, use another API.
Add pg_nx flag in pmap_qenter on x86 to make kernel pages non-executable.
Other architectures that support execute-specific permissons on page table
entries should subsequently be updated to match.
Submitted by: Darrick Lew <darrick.freebsd AT gmail.com>
Reviewed by: markj
Discussed with: alc, jhb, kib
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D14062
compilation under FreeBSD. The mthca driver was temporarily removed as
part of the Linux 4.9 RoCE/infinband upgrade.
Top commit in Linux source tree:
69973b830859bc6529a7a0468ba0d80ee5117826
Sponsored by: Mellanox Technologies
significant source of cache line contention from vm_page_alloc(). Use
accessors and vm_page_unwire_noq() so that the mechanism can be easily
changed in the future.
Reviewed by: markj
Discussed with: kib, glebius
Tested by: pho (earlier version)
Sponsored by: Netflix, Dell/EMC Isilon
Differential Revision: https://reviews.freebsd.org/D14273
global to per-domain state. Protect reservations with the free lock
from the domain that they belong to. Refactor to make vm domains more
of a first class object.
Reviewed by: markj, kib, gallatin
Tested by: pho
Sponsored by: Netflix, Dell/EMC Isilon
Differential Revision: https://reviews.freebsd.org/D14000
A version of each of the MD files by necessity exists for each CPU
architecture supported by the Linuxolator. Clean these up so that new
architectures do not inherit whitespace issues.
Clean up shared Linuxolator files while here.
Sponsored by: Turing Robotic Industries Inc.
It is coded according to the Intel document 336996-001, reading of the
patches posted on lkml, and some additional consultations with Intel.
For existing processors, you need a microcode update which adds IBRS
CPU features, and to manually enable it by setting the tunable/sysctl
hw.ibrs_disable to 0. Current status can be checked in sysctl
hw.ibrs_active. The mitigation might be inactive if the CPU feature
is not patched in, or if CPU reports that IBRS use is not required, by
IA32_ARCH_CAP_IBRS_ALL bit.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D14029
Use PCID to avoid complete TLB shootdown when switching between user
and kernel mode with PTI enabled.
I use the model close to what I read about KAISER, user-mode PCID has
1:1 correspondence to the kernel-mode PCID, by setting bit 11 in PCID.
Full kernel-mode TLB shootdown is performed on context switches, since
KVA TLB invalidation only works in the current pmap. User-mode part of
TLB is flushed on the pmap activations as well.
Similarly, IPI TLB shootdowns must handle both kernel and user address
spaces for each address. Note that machines which implement PCID but
do not have INVPCID instructions, cause the usual complications in the
IPI handlers, due to the need to switch to the target PCID temporary.
This is racy, but because for PCID/no-INVPCID we disable the
interrupts in pmap_activate_sw(), IPI handler cannot see inconsistent
state of CPU PCID vs PCPU pmap/kcr3/ucr3 pointers.
On the other hand, on kernel/user switches, CR3_PCID_SAVE bit is set
and we do not clear TLB.
I can imagine alternative use of PCID, where there is only one PCID
allocated for the kernel pmap. Then, there is no need to shootdown
kernel TLB entries on context switch. But copyout(3) would need to
either use method similar to proc_rwmem() to access the userspace
data, or (in reverse) provide a temporal mapping for the kernel buffer
into user mode PCID and use trampoline for copy.
Reviewed by: markj (previous version)
Tested by: pho
Discussed with: alc (some aspects)
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
Differential revision: https://reviews.freebsd.org/D13985
These files previously had a 3-clause license and 'THE REGENTS' text.
Switch to standard 2-clause text with kib's approval, and add the SPDX
tag.
Approved by: kib
Uses of mallocarray(9).
The use of mallocarray(9) has rocketed the required swap to build FreeBSD.
This is likely caused by the allocation size attributes which put extra pressure
on the compiler.
Given that most of these checks are superfluous we have to choose better
where to use mallocarray(9). We still have more uses of mallocarray(9) but
hopefully this is enough to bring swap usage to a reasonable level.
Reported by: wosch
PR: 225197
(i386 and arm) that never implement them. This allows the removal of
#ifdef PHYS_TO_DMAP on code otherwise protected by a runtime check on
PMAP_HAS_DMAP. It also fixes the build on ARM and i386 after I forgot an
#ifdef in r328168.
Reported by: Milan Obuch
Pointy hat to: me
kernel by PHYS_TO_DMAP() as previously present on amd64, arm64, riscv, and
powerpc64. This introduces a new MI macro (PMAP_HAS_DMAP) that can be
evaluated at runtime to determine if the architecture has a direct map;
if it does not (or does) unconditionally and PMAP_HAS_DMAP is either 0 or
1, the compiler can remove the conditional logic.
As part of this, implement PHYS_TO_DMAP() on sparc64 and mips64, which had
similar things but spelled differently. 32-bit MIPS has a partial direct-map
that maps poorly to this concept and is unchanged.
Reviewed by: kib
Suggestions from: marius, alc, kib
Runtime tested on: amd64, powerpc64, powerpc, mips64
pathconf(2) and fpathconf(2) both return a long. The kern_[f]pathconf()
functions now accept a pointer to a long value rather than modifying
td_retval directly. Instead, the system calls explicitly store the
returned long value in td_retval[0].
Requested by: bde
Reviewed by: kib
Sponsored by: Chelsio Communications
The implementation of the Kernel Page Table Isolation (KPTI) for
amd64, first version. It provides a workaround for the 'meltdown'
vulnerability. PTI is turned off by default for now, enable with the
loader tunable vm.pmap.pti=1.
The pmap page table is split into kernel-mode table and user-mode
table. Kernel-mode table is identical to the non-PTI table, while
usermode table is obtained from kernel table by leaving userspace
mappings intact, but only leaving the following parts of the kernel
mapped:
kernel text (but not modules text)
PCPU
GDT/IDT/user LDT/task structures
IST stacks for NMI and doublefault handlers.
Kernel switches to user page table before returning to usermode, and
restores full kernel page table on the entry. Initial kernel-mode
stack for PTI trampoline is allocated in PCPU, it is only 16
qwords. Kernel entry trampoline switches page tables. then the
hardware trap frame is copied to the normal kstack, and execution
continues.
IST stacks are kept mapped and no trampoline is needed for
NMI/doublefault, but of course page table switch is performed.
On return to usermode, the trampoline is used again, iret frame is
copied to the trampoline stack, page tables are switched and iretq is
executed. The case of iretq faulting due to the invalid usermode
context is tricky, since the frame for fault is appended to the
trampoline frame. Besides copying the fault frame and original
(corrupted) frame to kstack, the fault frame must be patched to make
it look as if the fault occured on the kstack, see the comment in
doret_iret detection code in trap().
Currently kernel pages which are mapped during trampoline operation
are identical for all pmaps. They are registered using
pmap_pti_add_kva(). Besides initial registrations done during boot,
LDT and non-common TSS segments are registered if user requested their
use. In principle, they can be installed into kernel page table per
pmap with some work. Similarly, PCPU can be hidden from userspace
mapping using trampoline PCPU page, but again I do not see much
benefits besides complexity.
PDPE pages for the kernel half of the user page tables are
pre-allocated during boot because we need to know pml4 entries which
are copied to the top-level paging structure page, in advance on a new
pmap creation. I enforce this to avoid iterating over the all
existing pmaps if a new PDPE page is needed for PTI kernel mappings.
The iteration is a known problematic operation on i386.
The need to flush hidden kernel translations on the switch to user
mode make global tables (PG_G) meaningless and even harming, so PG_G
use is disabled for PTI case. Our existing use of PCID is
incompatible with PTI and is automatically disabled if PTI is
enabled. PCID can be forced on only for developer's benefit.
MCE is known to be broken, it requires IST stack to operate completely
correctly even for non-PTI case, and absolutely needs dedicated IST
stack because MCE delivery while trampoline did not switched from PTI
stack is fatal. The fix is pending.
Reviewed by: markj (partially)
Tested by: pho (previous version)
Discussed with: jeff, jhb
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Focus on code where we are doing multiplications within malloc(9). None of
these ire likely to overflow, however the change is still useful as some
static checkers can benefit from the allocation attributes we use for
mallocarray.
This initial sweep only covers malloc(9) calls with M_NOWAIT. No good
reason but I started doing the changes before r327796 and at that time it
was convenient to make sure the sorrounding code could handle NULL values.
X-Differential revision: https://reviews.freebsd.org/D13837
domains can be done by the _domain() API variants. UMA also supports a
first-touch policy via the NUMA zone flag.
The slab layer is now segregated by VM domains and is precise. It handles
iteration for round-robin directly. The per-cpu cache layer remains
a mix of domains according to where memory is allocated and freed. Well
behaved clients can achieve perfect locality with no performance penalty.
The direct domain allocation functions have to visit the slab layer and
so require per-zone locks which come at some expense.
Reviewed by: Attilio (a slightly older version)
Tested by: pho
Sponsored by: Netflix, Dell/EMC Isilon
An lld-linked i386 kernel hangs on boot, after em(4) starts. This seems
similar to the issue that prompted us to disable VIMAGE on arm64 in
r326179. Disable VIMAGE on i386 for now while we investigate.
PR: 225077
Sponsored by: The FreeBSD Foundation
We already clear %RFLAGS.DF on the kernel entry due to the compiler's
ABI requirements.
Suggested by: jhb
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Iwasaki-san's copyright over. Remove FIXME code that couldn't possibly
work. Call tc_settime() with our estimate of the delta we've been
alseep (the one we print) to adjust the time. Not sure what to do
about callouts, so keep the small #ifdef in place there.
Differential Revision: https://reviews.freebsd.org/D13823
inline ccbque.h into scsi_low.h. The file isn't MD, so shouldn't live
in i386/isa. It's only used by scsi_low, so move it there so no new
clients accidentally grow. scsi_low may not even still work, and the
locking here is still SPL based. CAM should do the right thing, but
I've received no reports of these cards still working. At least it
compiles still and there's one fewer files in sys/i386/isa. While I'm
here, ansify and de-splize. CCB_MWANTED appears to be a clear-only
flag, but I've not changed that.
Differential Review: https://reviews.freebsd.org/D13672
It does not change anything in the behavior of trap_pfault(), while
eliminating obfuscation of jumping to the code which checks for the
condition reversed of the goto cause. Also avoid force initialize the
rv variable, since it is now only accessed after storing vm_fault()
return value.
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D13725
The ep(4) driver is the only consumer of the two functions from
elink.c. I removed the standalone module as well, and most likely,
the module metadata is not needed anywhere, but this is for later
cleanup.
Discussed with: imp, jhb
Sponsored by: The FreeBSD Foundation
The i386 FPU (AKA npx) code does not depend on ISA devices at all,
after the support for IRQ13 FPU exceptions was removed. Put the file
into the expected place in the kernel source tree.
Discussed with: jhb
Sponsored by: The FreeBSD Foundation
Make it easier to identify the point where we started diverging from
NetBSD. Newer versions of these files have been updated to a new license
so this information may become useful some day.
Obtained from: NetBSD
They provide relaxed-ordered atomic access semantic. Due to the
FreeBSD memory model, the operations are syntaxical wrappers around
the volatile accesses. The volatile qualifier is used to ensure that
the access not optimized out and in turn depends on the volatile
semantic as implemented by supported compilers.
The motivation for adding the operation is to help people coming from
other systems or knowing the C11/C++ standards where atomics have
special type and require use of the special access operations. It is
still the case that FreeBSD requires plain load and stores of aligned
integer types to be atomic.
Suggested by: jhb
Reviewed by: alc, jhb
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D13534
of low physical memory:
Update the comment about leaving the permanent mapping in place. This
also improves the wording of the comment. PTD 0 is still left alone
because it is fairly important that it was unmapped earlier, and the
comment now describes the unmapping of the other low PTDs that the code
actually does.
Reviewed by: kib
it by a transient double mapping for the one instruction in ACPI wakeup
where it is needed (and for many surrounding instructions in ACPI resume).
Invalidate the TLB as soon as convenient after undoing the transient
mapping. ACPI resume already has the strict ordering needed for this.
This fixes the non-trapping of null pointers and other garbage pointers
below NBPDR (except transiently). NBPDR is quite large (4MB, or 2MB for
PAE).
This fixes spurious traps at the first instruction in VM86 bioscalls.
The traps are for transiently missing read permission in the first
VM86 page (physical page 0) which was just written to at KERNBASE in
the kernel. The mechanism is unknown (it is not simply PG_G).
locore uses a similar but larger transient double mapping and needs
it for 2 instructions instead of 1. Unmap the first PDE in it after
the 2 instructions to detect most garbage pointers while bootstrapping.
pmap_bootstrap() finishes the unmapping.
Remove the avoidance of the double mapping for a recently fixed special
case. ACPI resume could use this avoidance (made non-special) to avoid
any problems with the transient double mapping, but no such problems
are known.
Update comments in locore. Many were for old versions of FreeBSD which
tried to map low memory r/o except for special cases, or might have
allowed access to low memory via physical offsets. Now all kernel
maps are r/w, and removal of of the double map disallows use of physical
offsets again.
when KERNLOAD is smaller than NBPDR (not the default) and PG_G is
enabled (the default if the CPU supports it). This case has relatively
minor problems with coherency of the permanent double mapping, but the
fix in r167869 to improve coherency creates page tables with 3 different
errors so never worked.
The permanent double mapping is fundamentally broken and will be removed
soon. It fundamentally breaks trapping for null pointers and requires
complications to avoid cache coherency bugs. It is currently used for
only a single instruction in ACPI resume,
Many fixes VM86 and/or ACPI and/or the double map were attempted near
r1200000. r167869 attempted to fix cache coherency bugs in an unusual
case, but the bugs were unreachable because older errors in page tables
caused a crash first.
This commit just makes r167869 work as intended. Part 1 of these fixes
fixed the other errors, but also stopped mapping the PDE for KERNBASE
as a large page, so double mapping of this PDE only causes the same
problems as when KERNLOAD is the default. Except for the problem of
trapping null pointers, r167869 could be used to fix these problems,
but it is inactive in usual cases. The only known other problem is
that incoherent permissions for page 0 cause spurious traps in VM86
BIOS calls.
Reviewed by: kib
when KERNLOAD is not a multiple of NBPDR (not the default) and PSE is
enabled (the default if the CPU supports it). Addresses in PDEs must
be a multiple of NBPDR in the PSE case, but were not so in the crashing
case.
KERNLOAD defaults to NBPDR. NBPDR is 4 MB for !PAE and 2 MB for PAE.
The default can be changed by editing i386/include/vmparam.h or using
makeoptions. It can be changed to less than NBPDR to save real and
virtual memory at a small cost in time, or to more than NBPDR to waste
real and virtual memory. It must be larger than 1 MB and a multiple of
PAGE_SIZE. When it is less than NBPDR, it is necessarily not a multiple
of NBPDR. This case has much larger bugs which will be fixed in part 2.
The fix is to only use PSE for physical addresses above <KERNLOAD
rounded _up_ to an NBPDR boundary>. When the rounding is non-null,
this leaves part of the kernel not using large pages. Rounding down
would avoid this pessimization, but would break setting of PAT bits
on i/o pages if it goes below 1MB. Since rounding down always goes
below 1MB when KERNLOAD < NBPDR and the KERNLOAD > NBPDR case is not
useful, never round down.
Fix related style bugs (e.g., wrong literal values for NBPDR in comments).
Reviewed by: kib
memory:
Load the kernel eflags less magically, as in locore. The magic increased
when I removed eflags from the pcb in r305899.
Remove a jump to low memory that became garbage when the i386 version was
mostly replaced by the amd64 version in r235622.
The amd64 version is very similar. It still loads the flags magically,
but is not missing comments about using the special page table.
Reviewed by: kib
The DTrace fasttrap entry points expect a struct reg containing the
register values of the calling thread. Perform the conversion in
fasttrap rather than in the trap handler: this reduces the number of
ifdefs and avoids wasting stack space for traps that don't involve
DTrace.
MFC after: 2 weeks
Logically, extend r286288 to cover all threads, by default.
The world has largely moved on from i386. Most FreeBSD users and developers
test on amd64 hardware. For better or worse, we have written a non-trivial
amount of kernel code that relies on stacks larger than 8 kB, and it "just
works" on amd64, so there has been little incentive to shrink it.
amd64 had its KSTACK_PAGES bumped to 4 back in Peter's initial AMD64 commit,
r114349, in 2003. Since that time, i386 has limped along on a stack half
the size. We've even observed the stack overflows years ago, but neglected
to fix the issue; see the 20121223 and 20150728 entries in UPDATING.
If anyone is concerned with this change, I suggest they configure their
AMD64 kernels with KSTACK_PAGES 2 and fix the fallout there first. Eugene
has identified a list of high stack usage functions in the first PR below.
PR: 219476, 224218
Reported by: eugen@, Shreesh Holla <hshreesh AT yahoo.com>
Relnotes: maybe
Sponsored by: Dell EMC Isilon
This variable should be pure MI except possibly for reading it in MD
dump routines. Its initialization was pure MD in 4.4BSD, but FreeBSD
changed this in r36441 in 1998. There were many imperfections in
r36441. This commit fixes only a small one, to simplify fixing the
others 1 arch at a time. (r47678 added support for
special/early/multiple message buffer initialization which I want in
a more general form, but this was too fragile to use because hacking
on the msgbufp global corrupted it, and was only used for 5 hours in
-current...)
In the linux ENOADATA is frequently #defined as ENOATTR.
The change is required for an xattrs support implementation.
MFC after: 1 week
Discussed with: netchild
Approved by: pfg
Differential Revision: https://reviews.freebsd.org/D13221
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
For FreeBSD/arm64's cloudabi32 support, I'm going to need a TO_PTR() in
this place. Also use it for all of the other source files, so that the
difference remains as minimal as possible.
MFC after: 2 weeks
Upon successful completion, the execve() system call invokes
exec_setregs() to initialize the registers of the initial thread of the
newly executed process. What is weird is that when execve() returns, it
still goes through the normal system call return path, clobbering the
registers with the system call's return value (td->td_retval).
Though this doesn't seem to be problematic for x86 most of the times (as
the value of eax/rax doesn't matter upon startup), this can be pretty
frustrating for architectures where function argument and return
registers overlap (e.g., ARM). On these systems, exec_setregs() also
needs to initialize td_retval.
Even worse are architectures where cpu_set_syscall_retval() sets
registers to values not derived from td_retval. On these architectures,
there is no way cpu_set_syscall_retval() can set registers to the way it
wants them to be upon the start of execution.
To get rid of this madness, let sys_execve() return EJUSTRETURN. This
will cause cpu_set_syscall_retval() to leave registers intact. This
makes process execution easier to understand. It also eliminates the
difference between execution of the initial process and successive ones.
The initial call to sys_execve() is not performed through a system call
context.
Reviewed by: kib, jhibbits
Differential Revision: https://reviews.freebsd.org/D13180
Mainly focus on files that use BSD 3-Clause license.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
Initially, only tag files that use BSD 4-Clause "Original" license.
RelNotes: yes
Differential Revision: https://reviews.freebsd.org/D13133
It is for console presented at 2001 and featuring Pentium III
processor. Even if any of them are still alive and run FreeBSD, we do
not have any sign of life from their users. While removing another
dozens of #ifdefs from the i386 sources reduces the aversion from
looking at the code and improves the platform vitality.
Reviewed by: cem, pfg, rink (XBOX support author)
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D13016
Some callers of fpusetregs()/npxsetregs(), most importantly
set_fpcontext(), clear reserved bits. But some did not. Do the
clearing in fpusetregs() and remove now redundand operation from
set_fpcontext().
Reported by: Maxime Villard <max@m00nbsd.net>
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
HEAD. Enable VIMAGE in GENERIC kernels and some others (where GENERIC does
not exist) on HEAD.
Disable building LINT-VIMAGE with VIMAGE being default.
This should give it a lot more exposure in the run-up to 12 to help
us evaluate whether to keep it on by default or not.
We are also hoping to get better performance testing.
The feature can be disabled using nooptions.
Requested by: many
Reviewed by: kristof, emaste, hiren
X-MFC after: never
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D12639
All of the kernel dump implementations keep track of the current offset
("dumplo") within the dump device. However, except for textdumps, they
all write the dump sequentially, so we can reduce code duplication by
having the MI code keep track of the current offset. The new
dump_append() API can be used to write at the current offset.
This is needed to implement support for kernel dump compression in the
MI kernel dump code.
Also simplify dump_encrypted_write() somewhat: use dump_write() instead
of duplicating its bounds checks, and get rid of the redundant offset
tracking.
Reviewed by: cem
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D11722
descriptors does not fit into currently allocated LDT, or trim the
return if the range fits partially. Before, the function returned
EINVAL.
Fix two bugs in r324366: use capped num counter for malloc size, and
do not leak allocated buffer on EINVAL (by handling EINVAL case as
normal, see above).
Reviewed by: bde
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Remove mtx_owned() checks from set_user_ldt(). Split the function
into _locked() version which requires the dt_lock spinlock owned, and
make set_user_ldt() a wrapper. Add a comment in swtch.s noting that
the call to the new set_user_ldt() cannot recurse on dt_lock.
Remove #ifdef SMP block, the addend is always zero on UP.
Fix type of set_user_ldt_rv(), making it match the type used for
smb_rendezvous() callback, and remove the cast. Use curproc.
Reviewed by: bde
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
The values from the old address space do not make sense for the new
program. In particular, gsbase might be the TLS base for the old
program but the new program has no TLS now.
amd64 already handles this correctly.
Reported and reviewed by: bde
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Provide consistent snapshot of the requested descriptors by preventing
other threads from modifying LDT while we fetch the data, lock dt_lock
around the read. Copy the data into intermediate buffer, which is
copied out after the lock is dropped.
Comparing with the amd64 version, the read is done byte by byte, since
there is no atomic 64bit read (cmpxchg8b method is too heavy comparing
with the avoided issues).
Improve overflow checking for the descriptors range calculations and
remove unneeded casts. Use unsigned types for sizes.
Allow zero num argument to i386_get_ldt() and i386_set_ldt(). This
case is handled naturally by the code flow.
Reviewed by: bde
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Split the handlers for pop of invalid selectors from the trap frame
into usermode and kernel variants. Usermode handler is kept as is, it
restores the already loaded parts of the trap frame and jumps to set
up a signal delivery to the user process.
New kernel part of the handler emulates IRET treatment of the segments
which would violate access right. It loads NUL selector in the
segment register which load causes the fault, and then continues the
return to interrupted kernel code. Since invalid selectors in the
segment registers in the kernel mode can only exist while kernel still
enters or exits from userspace, we only zero invalid userspace
selectors. If userspace tries to use the segment register, it gets a
signal, as if the processor segment descriptor cache was reloaded.
Reported by: Maxime Villard <max@m00nbsd.net>
Suggested and reviewed by: bde
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Do not return from interrupt using the POP_FRAME;iret instruction
sequence, always jump to doreti.
The user segments selectors saved on the stack might become invalid
because userspace manipulated LDT in a parallel thread. trap() is
aware of such issue, but it is only prepared to handle it at iret and
segment registers load operations in doreti path.
Also remove POP_FRAME macro because it is no longer used.
Reviewed by: bde, jhb (as part of r323722)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
some still useful bits of the reverted revision.
The problem with the committed fix is that there are still issues with
returning from NMI, when NMI interrupted kernel in a moment where the
kernel segments selectors were still not loaded into registers. If
this happens, the NMI return would loose the userspace selectors
because r323722 does not reload segment registers on return to kernel
mode.
Fixing the problem is complicated. Since an alternative approach to
handle the original bug exists, it makes sence to stop adding more
complexity.
Discussed with: bde
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Care must be taken when updating the active LDT, since parallel
threads might try to load a segment descriptor which is currently
updated. Since the results are undefined, this cannot be ignored by
claiming to be an application race.
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D12413
Suppose that userspace is executing with the non-standard segment
descriptors. Then, until exception or interrupt handler executed
SET_KERNEL_SEGS, kernel is still executing with user %ds, %es and %fs.
If an interrupt occurs in this window, the interrupt handler is
executed unsafely, relying on usability of the usermode registers. If
the interrupt results in the context switch on return, the
contamination of the kernel state spreads to the thread we switched
to. As result, kernel data accesses might fault or, if only the base
is changed, completely messed up.
More, if the user segment was allocated in LDT, another thread might
mark the descriptor as invalid before doreti code tried to reload
them. In this case kernel panics.
The issue exists for all exception entry points which use trap gate,
and thus do not automatically disable interrupts on entry, and for
lcall_handler.
Fix is two-fold: first, we need to disable interrupts for all kernel
entries, changing the IDT descriptor types from trap gate to interrupt
gate. Interrupts are re-enabled not earlier than the kernel segments
are loaded into the segment registers. Second, we only load the
segment registers from the trap frame when returning to usermode. For
the later, all interrupt return paths must happen through the doreti
common code.
There is no way to disable interrupts on call gate, which is the
supposed mode of servicing for lcall $7,$0 syscalls. Change the LDT
descriptor 0 into a code segment type and point it to the userspace
trampoline which redirects the syscall to int $0x80.
All the measures make the segment register handling similar to that of
amd64. We do not apply amd64 optimizations of not reloading segment
registers on return from the syscall.
Reported by: Maxime Villard <max@m00nbsd.net>
Tested by: pho (the non-lcall part)
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D12402
This driver supports both NTB-to-NTB and NTB-to-Root Port modes (though
the second with predictable complications on hot-plug and reboot events).
I tested it with PEX 8717 and PEX 8733 chips, but expect it should work
with many other compatible ones too. It supports up to two NT bridges
per chip, each of which can have up to 2 64-bit or 4 32-bit memory windows,
6 or 12 scratchpad registers and 16 doorbells. There are also 4 DMA engines
in those chips, but they are not yet supported.
While there, rename Intel NTB driver from generic ntb_hw(4) to more specific
ntb_hw_intel(4), so now it is on par with this new ntb_hw_plx(4) driver and
alike to Linux naming.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
The actual cache line size has always been 64 bytes.
The 128 number arose as an optimization for Core 2 era Intel processors. By
default (configurable in BIOS), these CPUs would prefetch adjacent cache
lines unintelligently. Newer CPUs prefetch more intelligently.
The latest Core 2 era CPU was introduced in September 2008 (Xeon 7400
series, "Dunnington"). If you are still using one of these CPUs, especially
in a multi-socket configuration, consider locating the "adjacent cache line
prefetch" option in BIOS and disabling it.
Reported by: mjg
Reviewed by: np
Discussed with: jhb
Sponsored by: Dell EMC Isilon
Simplify i386 trap().
- Use more relevant name 'signo' instead of 'i' for the local variable
which contains a signal number to send for the current exception.
- Eliminate two labels 'userout' and 'out' which point to the very end
of the trap() function. Instead use return directly.
- Re-indent the prot_fault_translation block by reducing if() nesting.
- Some more monor style changes.
Reviewed by: bde
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
The machdep.uprintf_signal sysctl replaced it in more convenient way,
not requiring recompilation to use and providing more information on
fault.
Reviewed by: bde
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Make sure that %eflags.D flag is cleared for hook.
Improve comments.
When #UD dtrace code checks for a registered hook before checking that
the exception was raised from kernel mode, we might run with the user
%ds, trapping on access. Exception entry from userspace automatically
load valid %ss, which we can use there instead.
Noted and reviewed by: bde
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
exception did not happen in vm86 mode. A vm86 userland process could
have a %cs that matches GSEL_KPL, while dtrace cannot hook it.
Submitted by: Maxime Villard <max@m00nbsd.net>
MFC after: 3 days
This helps simplify the code in kern_shutdown.c and reduces the number
of globally visible functions.
No functional change intended.
Reviewed by: cem, def
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D11603
dump_start() and dump_finish() are responsible for writing kernel dump
headers, optionally writing the key when encryption is enabled, and
initializing the initial offset into the dump device.
Also remove the unused dump_pad(), and make some functions static now that
they're only called from kern_shutdown.c.
No functional change intended.
Reviewed by: cem, def
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D11584
Add an option to dynamically rebalance interrupts across cores
(hw.intrbalance); off by default.
The goal is to minimize preemption. By placing interrupt sources on distinct
CPUs, ithreads get preferentially scheduled on distinct CPUs. Overall
preemption is reduced and latency is reduced. In our workflow it reduced
"fighting" between two high-frequency interrupt sources. Reduced latency
was proven by, e.g., SPEC2008.
Submitted by: jeff@ (earlier version)
Reviewed by: kib@
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D10435
reduces diff between amd64 and i386. Also, it fixes a regression introduced
in r322076, i.e., identify_hypervisor() failed to identify some hypervisors.
This function assumes cpu_feature2 is already initialized.
Reported by: dexuan
Tested by: dexuan
but it was broken since r273800 (and r278522, its MFC to stable/10) because
identify_cpu() is called too late, i.e., after init_param1().
MFC after: 3 days
Some C wrappers for x86 instructions do not touch global memory and only act
on their arguments; they can be marked __pure2, aka __const__. Without this
annotation, Clang 3.9.1 is not intelligent enough on its own to grok that
these functions are __const__.
Submitted by: Anton Rang <anton.rang AT isilon.com>
Sponsored by: Dell EMC Isilon
when a signal is not intended to be sent.
The variable holding the signal number to send is left uninitialized,
which sometimes triggers invalid signal checks.
For NMI, a return to usermode without ast processing is done. On the
other hand, for spurious dtrace probe interrupt it is usermode which
triggered the interrupt, so handle it through userret() as any other
fault.
Reported by: Nils Beyer <nbe@renzel.net>
PR: 221151
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
The removed release stores are not needed since stores are totally
ordered on i386 and amd64.
Reviewed by: alc, kib (previous revision)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D11790
If %ss is loaded with a segment pointing to a non-present descriptor
by the IRETD instruction, a kernel-mode #SS exception is generated.
Resulting T_STKFLT trap must be checked against doreti_iret_fault
location and handled, otherwise userspace may panic the kernel.
Note that this is i386 variant of FreeBSD-SA-15:21.amd64, but unlike
amd64, there is no swapgs on i386 and the issue is arguably not
exploitable.
Reported by: Maxime Villard <max@m00nbsd.net>
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
start address is not required to be page aligned. However, the loop
within pmap_invalidate_cache_range() that performs the actual cache
line invalidations requires that the starting address be truncated to
a multiple of the cache line size. This change corrects an error in
that truncation.
Submitted by: Brett Gutstein <bgutstein@rice.edu>
Reviewed by: kib
MFC after: 1 week
--Remove special-case handling of sparc64 bus_dmamap* functions.
Replace with a more generic mechanism that allows MD busdma
implementations to generate inline mapping functions by
defining WANT_INLINE_DMAMAP in <machine/bus_dma.h>. This
is currently useful for sparc64, x86, and arm64, which all
implement non-load dmamap operations as simple wrappers
around map objects which may be bus- or device-specific.
--Remove NULL-checked bus_dmamap macros. Implement the
equivalent NULL checks in the inlined x86 implementation.
For non-x86 platforms, these checks are a minor pessimization
as those platforms do not currently allow NULL maps. NULL
maps were originally allowed on arm64, which appears to have
been the motivation behind adding arm[64]-specific barriers
to bus_dma.h, but that support was removed in r299463.
--Simplify the internal interface used by the bus_dmamap_load*
variants and move it to bus_dma_internal.h
--Fix some drivers that directly include sys/bus_dma.h
despite the recommendations of bus_dma(9)
Reviewed by: kib (previous revision), marius
Differential Revision: https://reviews.freebsd.org/D10729
struct thread.
For all architectures, the syscall trap handlers have to allocate the
structure on the stack. The structure takes 88 bytes on 64bit arches
which is not negligible. Also, it cannot be easily found by other
code, which e.g. caused duplication of some members of the structure
to struct thread already. The change removes td_dbg_sc_code and
td_dbg_sc_nargs which were directly copied from syscall_args.
The structure is put into the copied on fork part of the struct thread
to make the syscall arguments information correct in the child after
fork.
This move will also allow several more uses shortly.
Reviewed by: jhb (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
X-Differential revision: https://reviews.freebsd.org/D11080
from machine/proc.h, consistently on all architectures.
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
X-Differential revision: https://reviews.freebsd.org/D11080
An extra copy of the system call gate was added to the default LDT back
in 1996 (r18513 / r18514). However, the ability to run BSD/OS 2.1
i386 binaries under FreeBSD's native ABI is most likely no longer
needed.
Discussed with: kib
A long long time ago the register keyword told the compiler to store
the corresponding variable in a CPU register, but it is not relevant
for any compiler used in the FreeBSD world today.
ANSIfy related prototypes while here.
Reviewed by: cem, jhb
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D10193
in place. To do per-cpu stats, convert all fields that previously were
maintained in the vmmeters that sit in pcpus to counter(9).
- Since some vmmeter stats may be touched at very early stages of boot,
before we have set up UMA and we can do counter_u64_alloc(), provide an
early counter mechanism:
o Leave one spare uint64_t in struct pcpu, named pc_early_dummy_counter.
o Point counter(9) fields of vmmeter to pcpu[0].pc_early_dummy_counter,
so that at early stages of boot, before counters are allocated we already
point to a counter that can be safely written to.
o For sparc64 that required a whole dummy pcpu[MAXCPU] array.
Further related changes:
- Don't include vmmeter.h into pcpu.h.
- vm.stats.vm.v_swappgsout and vm.stats.vm.v_swappgsin changed to 64-bit,
to match kernel representation.
- struct vmmeter hidden under _KERNEL, and only vmstat(1) is an exclusion.
This is based on benno@'s 4-year old patch:
https://lists.freebsd.org/pipermail/freebsd-arch/2013-July/014471.html
Reviewed by: kib, gallatin, marius, lidl
Differential Revision: https://reviews.freebsd.org/D10156
The MFC will include a compat definition of smp_no_rendevous_barrier()
that calls smp_no_rendezvous_barrier().
Reviewed by: gnn, kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D10313
- renaming l_ifreq::ifru_metric to l_ifreq::ifru_ivalue;
- adding a definition for ifr_ifindex which points to l_ifreq::ifru_ivalue.
A quick search indicates that Linux already got the above changes since 2.1.14.
Reviewed by: kib, marcel, dchagin
MFC after: 1 week
The change introduced a dependency between genassym.c and header files
generated from .m files, but that dependency is not specified in the
make files.
Also, the change could be not as useful as I thought it was.
Reported by: dchagin, Manfred Antar <null@pozo.com>, and many others
I fixed this in 1997, but the fix was over-engineered and fragile and
was broken in 2003 if not before. i386 parameters were copied to 8
other arches verbatim, mostly after they stopped working on i386, and
mostly without the large comment saying how the values were chosen on
i386. powerpc has a non-verbatim copy which just changes the uncritical
parameter and seems to add a sign extension bug to it.
Just treat negative offsets as offsets if they are no more negative than
-db_offset_max (default -64K), and remove all the broken parameters.
-64K is not very negative, but it is enough for frame and stack pointer
offsets since kernel stacks are small.
The over-engineering was mainly to go more negative than -64K for the
negative offset format, without affecting printing for more than a
single address.
Addresses in the top 64K of a (full 32-bit or 64-bit) address space
are now printed less well, but there aren't many interesting ones.
For arches that have many interesting ones very near the top (e.g.,
68k has interrupt vectors there), there would be no good limit for
the negative offset format and -64K is a good as anything.
The change is more intrusive than I would like because the feature
requires that a vector number is written to a special register.
Thus, now the vector number has to be provided to lapic_eoi().
It was readily available in the IO-APIC and MSI cases, but the IPI
handlers required more work.
Also, we now store the VMM IPI number in a global variable, so that it
is available to the justreturn handler for the same reason.
Reviewed by: kib
MFC after: 6 weeks
Differential Revision: https://reviews.freebsd.org/D9880
Long ago, perhaps only on i386, kernel text was mapped read-only and
it was necessary to change the mapping to read-write to set breakpoints
in kernel text. Other writes by ddb to kernel text were also allowed.
This write protection is harder to implement with 4MB pages, and was
lost even for 4K pages when 4MB pages were implemented. So changing
the mapping became useless. It was actually worse than useless since
it followed followed various null and otherwise garbage pointers to
not change random memory instead of the mapping. (On i386s, the
pointers became good in pmap_bootstrap(), and on amd64 the pointers
became bad in pmap_bootstrap() if not before.)
Another bug broke detection of following of null pointers on i386,
except early in boot where not detecting this was a feature. When
I fixed the bug, I accidentally broke the feature and soon got traps
in db_write_bytes(). Setting breakpoints early in ddb was broken.
kib pointed out that a clean way to do the adjustment would be to use
a special [sub]map giving a small window on the bytes to be written.
The trap handler didn't know how to fix up errors for pagefaults
accessing the map itself. Such errors rarely need fixups, since most
traps for the map are for the first access which is a read.
Reviewed by: kib
matches static binaries.
Interpretation of the 'static' there is that the binary must not
specify an interpreter. In particular, shared objects are matched by
the brand if BI_CAN_EXEC_DYN is also set.
This improves precision of the brand matching, which should eliminate
surprises due to brand ordering.
Revert r315701.
Discussed with and tested by: ed (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
CloudABI executables are statically linked and don't have an
interpreter. Setting the interpreter path to NULL used to work
previously, but r314851 introduced code that checks the string
unconditionally. Running CloudABI executables now causes a null pointer
dereference.
Looking at the rest of imgact_elf.c, it seems various other codepaths
already leaned on the fact that the interpreter path is set. Let's just
go ahead and pick an obviously incorrect interpreter path to appease
imgact_elf.c.
MFC after: 1 week
On the original i386, %dr[4-5] were unimplemented but not very clearly
reserved, so debuggers read them to print them. i386 was still doing
this.
On the original athlon64, %dr[4-5] are documented as reserved but are
aliased to %dr[6-7] unless CR4_DE is set, when accessing them traps.
On 2 of my systems, accessing %dr[4-5] trapped sometimes. On my Haswell
system, the apparent randomness was because the boot CPU starts with
CR4_DE set while all other CPUs start with CR4_DE clear. FreeBSD
doesn't support the data breakpoints enabled by CR4_DE and it never
changes this flag, so the flag remains different across CPUs and
the behaviour seemed inconsistent except while booting when the CPU
doesn't change.
The invalid accesses broke:
- read access for printing the registers in ddb "show watches" on CPUs
with CR4_DE set
- read accesses in fill_dbregs() on CPUs with CR4_DE set. This didn't
implement panic(3) since the user case always skipped %dr[4-5].
- write accesses in set_dbregs(). This also didn't affect userland.
When it didn't trap, the aliasing made it fragile.
Don't print the dummy (zero) values of %dr[4-5] in "show watches" for
i386 or amd64. Fix style bugs near this printing.
amd64 also has space in the dbregs struct for the reserved %dr[8-15]
and already didn't print the dummy values for these, and never accessed
any of the 10 reserved debug registers.
Remove cpufuncs for making the invalid accesses. Even amd64 had these.
related struct definitions out into the MI path.
Invert the native ipc structs to the Linux ipc structs convesion logic.
Since 64-bit variant of ipc structs has more precision convert native ipc
structs to the 64-bit Linux ipc structs and then truncate 64-bit values
into the non 64-bit if needed. Unlike Linux, return EOVERFLOW if the
values do not fit.
Fix SYSV IPC for 64-bit Linuxulator which never sets IPC_64 bit.
MFC after: 1 month
the syscalls that are not implemented in Linux kernel itself.
Cleanup DUMMY() macros.
Reviewed by: dchagin, trasz
Approved by: dchagin
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D9804
Bring back the i486 option in GENERIC by default.
The code related to i386 CPU variants configuration has received many
changes in the last years: most of the features are detected automatically,
so there are no performance penalties from keeping the 486 support enabled.
Re-instate the 486 support: while the general configuration could still be
cleaned a bit, there is no advantage in removing it.
Differential Revision: https://reviews.freebsd.org/D9879
80486 production was stopped by Intel on September 2007. Dropping the 486
configuration option from the GENERIC kernel improves performance
slightly.
Removing I486_CPU is consistent at this time: we don't support any
processor without a FPU and the PC-98 arch, which frequently involved i486
CPUs, is also gone so we don't test such platforms anymore.
Relnotes: yes
MFC after: 2 weeks
https://reviews.freebsd.org/D9879
Renumber cluase 4 to 3, per what everybody else did when BSD granted
them permission to remove clause 3. My insistance on keeping the same
numbering for legal reasons is too pedantic, so give up on that point.
Submitted by: Jan Schaumann <jschauma@stevens.edu>
Pull Request: https://github.com/freebsd/freebsd/pull/96
Otherwise kernel traps on NULL dereference if fpu_kern(9) is used from the
thread0 context.
Reported by: cem
Reviewed by: cem, jhb
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
PG_PROMOTED, that indicates whether lingering 4KB page mappings might
need to be flushed on a PDE change that restricts or destroys a 2MB
page mapping. This flag allows the pmap to avoid range invalidations
that are both unnecessary and costly.
Reviewed by: kib, markj
MFC after: 6 weeks
Differential Revision: https://reviews.freebsd.org/D9665
MTRR handlers are set in {amd64/i686}_mem_drvinit, which is called at
SI_SUB_DRIVERS, and that's too late when EARLY_AP_STARTUP is set because APs
have already started at this point. {amd64/i686}_mrinit is also called too late
for the BSP, since that happens when the memory device is attached, also after
APs have already started.
Move the position to SI_SUB_CPU, and also initialize the state for the BSP, so
that the APs can correctly get to the same state as the BSP.
Sponsored by: Citrix Systems R&D
MFC after: 1 week
Reviewed by: jhb, kib
Differential Revision: https://reviews.freebsd.org/D9630
compile options. Remove doxygen pointers to now deleted files. Remove
EISA and VME as examples in bus_space.9.
Retained EISA mode code for IO PIC and MPTABLES because that's not
EISA bus, per se, and some people have abused EISA to mean "EISA-like
behavior as opposed to ISA" rather than using it for EISA add-in
cards.
Relnotes: yes
machines, only a few 486 machines that used it, and those haven't had
enough memory to run FreeBSD for quite some time (often limited to
16MB).
Not to be confused with the Machine Check Architecture, which is still
very much alive and used (and untouched by this commit).
No Objection From: arch@
and wrong numbering for a few unimplemented syscalls.
For 32-bit Linuxulator, socketcall() syscall was historically
the entry point for the sockets API. Starting in Linux 4.3, direct
syscalls are provided for the sockets API. Enable it.
The initial version of patch was provided by trasz@ and extended by me.
Submitted by: trasz
MFC after: 2 week
Differential Revision: https://reviews.freebsd.org/D9381
and device npx.
This means that FPU is always initialized and handled when available,
and SSE+ register file and exception are handled when available. This
makes the kernel FPU code much easier to maintain by the cost of
slight bloat for CPUs older than 25 years.
CPU_DISABLE_CMPXCHG outlived its usefulness, see the removed comment
explaining the original purpose.
Suggested by and discussed with: bde
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
An incorrect output specifier was used which worked with clang by accident,
but breaks with the in-tree gcc version.
While here plug a whitespace nit.
Reported by: bde
protection change.
On superpage promotion, x86 pmaps do not invalidate existing 4K
entries for the superpage range, because they are compatible with the
promoted 2/4M entry. But the invalidation on superpage removal or
protection change only did single INVLPG with the base address of the
superpage. This reliably flushed superpage TLB entry, and 4K entry
for the first page of the superpage, potentially leaving other 4K TLB
entries lingering. Do the invalidation of the whole superpage range
to correct the problem.
Note that the precise invalidation is done by x86 code for kernel_pmap
only, for user pmaps whole (per-AS) TLB is flushed. This made the bug
well hidden, because promotions of the kernel mappings require
specific load.
Reported and tested by: Jonathan Looney <jtl@netflix.com> (previous version)
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
in the i386 pmap.
The curcpu macro loads the per-cpu data pointer as its first step,
so the remaining steps of pcpu_find(curcpu) are circular.
get_pcpu() is already implemented for arm, arm64, and risc-v.
My plan is to implement it for the remaining architectures and use
it to replace several instances of pcpu_find(curcpu) in MI code.
Reviewed by: kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D9370
SDM states that CLFLUSHOPT instructions can be ordered with other
writes by SFENCE, heavier MFENCE is not required.
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
the cmap lock. Releasing the lock first may result in the thread
being immediately rescheduled and bound to the same CPU, only to
unpin itself upon resuming execution.
Noted by: skra (in review for armv6 equivalent)
MFC after: 1 week
We would previously invalidate such entries individually, resulting in more
IPIs than necessary.
Reviewed by: alc, kib
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D9094
- em(4) igb(4) and lem(4)
- deprecate the igb device from kernel configurations
- create a symbolic link in /boot/kernel from if_em.ko to if_igb.ko
Devices tested:
- 82574L
- I218-LM
- 82546GB
- 82579LM
- I350
- I217
Please report problems to freebsd-net@freebsd.org
Partial review from jhb and suggestions on how to *not* brick folks who
originally would have lost their igbX device.
Submitted by: mmacy@nextbsd.org
MFC after: 2 weeks
Relnotes: yes
Sponsored by: Limelight Networks and Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D8299
Right now size of the structure is 472 bytes on amd64, which is
already large and stack allocations are indesirable. With the ino64
work, MNAMELEN is increased to 1024, which will make it impossible to have
struct statfs on the stack.
Extracted from: ino64 work by gleb
Discussed with: mckusick
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
operations to the MD PCPU region. Change sysmap initialization to only
allocate KVA pages for CPUs that are actually present. As a minor
optimization, this also prevents false sharing between adjacent sysmap objects
since the pcpu struct is already cacheline-aligned.
While here, move pc_qmap_addr initialization for the BSP into
pmap_bootstrap(), which allows use of pmap_quick* functions during early boot.
Reviewed by: kib
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D8833
Changes include modifications in kernel crash dump routines, dumpon(8) and
savecore(8). A new tool called decryptcore(8) was added.
A new DIOCSKERNELDUMP I/O control was added to send a kernel crash dump
configuration in the diocskerneldump_arg structure to the kernel.
The old DIOCSKERNELDUMP I/O control was renamed to DIOCSKERNELDUMP_FREEBSD11 for
backward ABI compatibility.
dumpon(8) generates an one-time random symmetric key and encrypts it using
an RSA public key in capability mode. Currently only AES-256-CBC is supported
but EKCD was designed to implement support for other algorithms in the future.
The public key is chosen using the -k flag. The dumpon rc(8) script can do this
automatically during startup using the dumppubkey rc.conf(5) variable. Once the
keys are calculated dumpon sends them to the kernel via DIOCSKERNELDUMP I/O
control.
When the kernel receives the DIOCSKERNELDUMP I/O control it generates a random
IV and sets up the key schedule for the specified algorithm. Each time the
kernel tries to write a crash dump to the dump device, the IV is replaced by
a SHA-256 hash of the previous value. This is intended to make a possible
differential cryptanalysis harder since it is possible to write multiple crash
dumps without reboot by repeating the following commands:
# sysctl debug.kdb.enter=1
db> call doadump(0)
db> continue
# savecore
A kernel dump key consists of an algorithm identifier, an IV and an encrypted
symmetric key. The kernel dump key size is included in a kernel dump header.
The size is an unsigned 32-bit integer and it is aligned to a block size.
The header structure has 512 bytes to match the block size so it was required to
make a panic string 4 bytes shorter to add a new field to the header structure.
If the kernel dump key size in the header is nonzero it is assumed that the
kernel dump key is placed after the first header on the dump device and the core
dump is encrypted.
Separate functions were implemented to write the kernel dump header and the
kernel dump key as they need to be unencrypted. The dump_write function encrypts
data if the kernel was compiled with the EKCD option. Encrypted kernel textdumps
are not supported due to the way they are constructed which makes it impossible
to use the CBC mode for encryption. It should be also noted that textdumps don't
contain sensitive data by design as a user decides what information should be
dumped.
savecore(8) writes the kernel dump key to a key.# file if its size in the header
is nonzero. # is the number of the current core dump.
decryptcore(8) decrypts the core dump using a private RSA key and the kernel
dump key. This is performed by a child process in capability mode.
If the decryption was not successful the parent process removes a partially
decrypted core dump.
Description on how to encrypt crash dumps was added to the decryptcore(8),
dumpon(8), rc.conf(5) and savecore(8) manual pages.
EKCD was tested on amd64 using bhyve and i386, mipsel and sparc64 using QEMU.
The feature still has to be tested on arm and arm64 as it wasn't possible to run
FreeBSD due to the problems with QEMU emulation and lack of hardware.
Designed by: def, pjd
Reviewed by: cem, oshogbo, pjd
Partial review: delphij, emaste, jhb, kib
Approved by: pjd (mentor)
Differential Revision: https://reviews.freebsd.org/D4712
contain a vm_page_t at the specified index. However, with this
change, vm_radix_remove() no longer panics. Instead, it returns NULL
if there is no vm_page_t at the specified index. Otherwise, it
returns the vm_page_t. The motivation for this change is that it
simplifies the use of radix tries in the amd64, arm64, and i386 pmap
implementations. Instead of performing a lookup before every remove,
the pmap can simply perform the remove.
Reviewed by: kib, markj
Differential Revision: https://reviews.freebsd.org/D8708
- If a page fault is triggered due to reserved bits in a PTE, treat it
as a fatal fault and panic.
- If PG_NX is in use, report whether a fatal page fault is due to an
instruction fetch or a data access.
- If a fatal page fault is due to reserved bits in a PTE, report that as
the page fault type rather than a protection violation.
MFC after: 1 month
The userspace case was already handled by pmap_allocpte(). For kernel
VA, page table page must exist, and demote cannot fail, so we need to
just call pmap_demote_pde(). Also note that due to the machine AS
layout, promotions in the KVA on i386 are highly unlikely, so this
change is mostly for completeness.
Reviewed by: alc, markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D8323
Reject attempts to read from or memory map offsets in /dev/mem that are
beyond the maximum-supported physical address of the current CPU.
Reviewed by: kib
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D7408
EFER_NXE is set in the EFER MSR by initializecpu() and must be set on all
CPUs in the system. When PG_NX support was added to PAE on i386, the
block to enable EFER_NXE was placed in a section of initializecpu() that
only runs if 'cpu == CPU_686'. During early boot, locore does an
initial pass to set cpu that sets it to CPU_686 on all CPUs later than
a Pentium. Later, printcpuinfo() adjusts the 'cpu' variable on
PII and later CPUs to one of CPU_PII, CPU_PIII, or CPU_P4. However,
printcpuinfo() is called after initializecpu() on the BSP, so the BSP
would enable EFER_NXE and pg_nx. The APs execute initializecpu() much
later after printcpuinfo() has run. The end result on a modern CPU was
that cpu was set to CPU_PIII when the APs invoked initializecpu(), so
they did not enable EFER_NXE. As a result, the APs would fault when
trying to access any pages marked with PG_NX set.
When booting a 2 CPU PAE kernel in bhyve this manifested as a hang before
single user mode. The attempt to execute /bin/init tried to copy out
the exec strings (argv, etc.) to a non-executable mapping while running
on the AP. The instruction kept faulting due to invalid bits in the PTE
in an infinite loop.
Fix this by moving the code to enable EFER_NXE out of the switch statement
on 'cpu' and always doing it if 'amd_feature' supports AMDID_NX.
MFC after: 2 weeks
- Make !KDB config buildable.
- Simplify interface to nmi_handle_intr() by evaluating panic_on_nmi
in one place, namely nmi_call_kdb(). This allows to remove do_panic
argument from the functions, and to remove i386/amd64 duplication of
the variable and sysctl definitions. Note that now NMI causes
panic(9) instead of trap_fatal() reporting and then panic(9),
consistently for NMIs delivered while CPU operated in ring 0 and 3.
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
On several Intel chipsets, diagnostic NMIs sent from BMC or NMIs
reporting hardware errors are broadcasted to all CPUs.
When kernel is configured to enter kdb on NMI, the outcome is
problematic, because each CPU tries to enter kdb. All CPUs are
executing NMI handlers, which set the latches disabling the nested NMI
delivery; this means that stop_cpus_hard(), used by kdb_enter() to
stop other cpus by broadcasting IPI_STOP_HARD NMI, cannot work. One
indication of this is the harmless but annoying diagnostic "timeout
stopping cpus".
Much more harming behaviour is that because all CPUs try to enter kdb,
and if ddb is used as debugger, all CPUs issue prompt on console and
race for the input, not to mention the simultaneous use of the ddb
shared state.
Try to fix this by introducing a pseudo-lock for simultaneous attempts
to handle NMIs. If one core happens to enter NMI trap handler, other
cores see it and simulate reception of the IPI_STOP_HARD. More,
generic_stop_cpus() avoids sending IPI_STOP_HARD and avoids waiting
for the acknowledgement, relying on the nmi handler on other cores
suspending and then restarting the CPU.
Since it is impossible to detect at runtime whether some stray NMI is
broadcast or unicast, add a knob for administrator (really developer)
to configure debugging NMI handling mode.
The updated patch was debugged with the help from Andrey Gapon (avg)
and discussed with him.
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D8249
These two ALU instructions first appeared on Linux. Then, libpcap adopted
and made them available since 1.6.2. Now more platforms including NetBSD
have them in kernel. So do we.
--이 줄 이하는 자동으로 제거됩니다--
Using the device pager with /dev/kmem is not stable since KVA mappings
are transient, but the device pager caches the PA associated with a
given offset forever. Interestingly, mips' implementation of
memmap() already refused requests for /dev/kmem.
Note that kvm_read/kvm_write do not use mmap, but use read and write on
/dev/kmem, so this should not affect libkvm users.
Reviewed by: kib
MFC after: 2 months
with no creative content. Include "lost" changes from git:
o Use /dev/efi instead of /dev/efidev
o Remove redundant NULL checks.
Submitted by: kib@, dim@, zbb@, emaste@
to add actions that run when a TCP frame is sent or received on a TCP
session in the ESTABLISHED state. In the base tree, this functionality is
only used for the h_ertt module, which is used by the cc_cdg, cc_chd, cc_hd,
and cc_vegas congestion control modules.
Presently, we incur overhead to check for hooks each time a TCP frame is
sent or received on an ESTABLISHED TCP session.
This change adds a new compile-time option (TCP_HHOOK) to determine whether
to include the hhook(9) framework for TCP. To retain backwards
compatibility, I added the TCP_HHOOK option to every configuration file that
already defined "options INET". (Therefore, this patch introduces no
functional change. In order to see a functional difference, you need to
compile a custom kernel without the TCP_HHOOK option.) This change will
allow users to easily exclude this functionality from their kernel, should
they wish to do so.
Note that any users who use a custom kernel configuration and use one of the
congestion control modules listed above will need to add the TCP_HHOOK
option to their kernel configuration.
Reviewed by: rrs, lstewart, hiren (previous version), sjg (makefiles only)
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D8185
userland. It supports userland interfaces to UEFI Runtime Services. This is
indended to the the MI portion of EFI RuntimeServices support.
Differential Revision: https://reviews.freebsd.org/D8128
Reviewed by: kib@, wblock@, Ganael Laplanche
Reduce the cost of TLB invalidation on x86 by using per-CPU completion flags
Reduce contention during TLB invalidation operations by using a per-CPU
completion flag, rather than a single atomically-updated variable.
On a Westmere system (2 sockets x 4 cores x 1 threads), dtrace measurements
show that smp_tlb_shootdown is about 50% faster with this patch; observations
with VTune show that the percentage of time spent in invlrng_single_page on an
interrupt (actually doing invalidation, rather than synchronization) increases
from 31% with the old mechanism to 71% with the new one. (Running a basic file
server workload.)
Submitted by: Anton Rang <rang at acm.org>
Reviewed by: cem (earlier version)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D8041
like other PCI network drivers. The sys/ofed directory is now mainly
reserved for generic infiniband code, with exception of the mthca driver.
- Add new manual page, mlx4en(4), describing how to configure and load
mlx4en.
- All relevant driver C-files are now prefixed mlx4, mlx4_en and
mlx4_ib respectivly to avoid object filename collisions when compiling
the kernel. This also fixes an issue with proper dependency file
generation for the C-files in question.
- Device mlxen is now device mlx4en and depends on device mlx4, see
mlx4en(4). Only the network device name remains unchanged.
- The mlx4 and mlx4en modules are now built by default on i386 and
amd64 targets. Only building the mlx4ib module depends on
WITH_OFED=YES .
Sponsored by: Mellanox Technologies
(1) Print the default segment %ss before adresses relative to %bp.
This is too cluttered for me, but so is printing some other default
prefixes, and this is a reasonable reminder that %ss is quite
likely to be different from %ds in 16-bit mode.
db_disasm still handles prefixes poorly, by trying to discard
redundant ones. This loses information, and sometimes the result
is wrong or misleading.
Clean up nearby initializations and dead code.
(2) Fix decoding of operand and address size prefixes in 16-bit mode.
They reverse the default in all modes.
Obtained from: (1) is partly from r1.4 (2003/11/08) in DFlyBSD (?)
db_segsize().
Use db_segsize() to set the default operand/address size for
disassembling. Allow overriding this with the "alternate" display
format /I. The API of db_disasm() should be debooleanized to pass a
more general request (amd64 needs overrides to sizes of 16, 32, and
64, but this commit doesn't implement anything for amd64 since much
larger changes are needed to restore the amd64 disassmbler's support
for non-default sizes).
Fix db_print_loc_and_inst() to ask for the normal format and not the
alternate in normal operation.
This is most useful for vm86 mode, but also works for 16-bit protected
mode.
Use db_segsize() to avoid trying to print a garbage stack trace if %cs
is 16 bits. Print something like the stack trace termination message
for a trap boundary instead.
Document that the alternate format is now useful on i386.
early printfs and debugging of vm86 initialization and some other early
initialization in some cases.) Add an option debug.late_console (with
default 1=off) to move console and kdb initialization back where it was.
Do the same for amd64 although there is no vm86 there.
On my test system, debug.late_console=0 works for the syscons, sio and
uart console drivers on amd64 and i386, and for vt on i386 but not on
amd64.
The early printfs fixed by debug.late_console=0 are:
- on i386, the message about lost memory above 4G
- with -v in otherwise normal use, about 20 printfs for SMAP
- other debugging messages for memory sizing. Mostly under -v and
not printed in normal use.
Document in a comment how much earlier the initialization and early
printf()s can be. That is very early for the console. Not much more
than curthread is needed. kdb use obviously needs to be not so early,
since it needs IDT initialization and that is done relatively late
for convenience and historical reasons.
preserve the ABI and API for applications. It was removed in the port
to amd64, but was remained as garbage giving a micro-pessimization and
spurious single-step traps on i386.
pcb_psl was intended to be used just to do a context switch of PSL_I,
but this context switch was null in most or all versions, and
mis-switching of PSL_T was done instead.
Some history:
- in 386BSD-0.0, cpu_switch() ran at splhigh() and splhigh() did too
much interrupt disabling, so interrupts were hard-disabled across
cpu_switch() and too many other places
- in 386BSD-0.0-patchkit through FreeBSD-4 and FreeBSD-5 before
SMPng, splhigh() did soft interrupt masking, and cpu_switch() was
excessively cautious and did a cli at the start and a sti at the
end to hard-disable interrupts across the switch
- SMPng replaced the spl's and cli's by spinlocks (just sched_lock?),
so interrupts were hard-disabled across cpu_switch() and too many
other places again
- initial attempts to fix this intended to restore some soft
interrupt disabling, but to support variations in this cpu_switch()
used pushfl/popfl into pcb_psl to avoid hard-coding the assumption
that the initial and final states have PSL_I enabled. But the
version with soft interrupt disabling wasn't used for long, or was
never committed, (except I always used my different version of it
for UP) so the pushfl/popl and pcb_psl to hold them have been doing
less than nothing for about 14 years.
While here, avoid using the old variable 'code' and remove it
in trap(). ('code' was meant for holding things like %dr6,
but is too small to hold %dr6 on amd64 and was reduced to an
obfuscation of tf_err, with early truncation on amd64.)
Submitted by: Michael Butler (imb@...)
This is not very easy to do, since ddb didn't know when traps are
for single-stepping. It more or less assumed that traps are either
breakpoints or single-step, but even for x86 this became inadequate
with the release of the i386 in ~1986, and FreeBSD passes it other
trap types for NMIs and panics.
On x86, teach ddb when a trap is for single stepping using the %dr6
register. Unknown traps are now treated almost the same as breakpoints
instead of as the same as single-steps. Previously, the classification
of breakpoints was almost correct and everything else was unknown so
had to be treated as a single-step. Now the classification of single-
steps is precise, the classification of breakpoints is almost correct
(as before) and everything else is unknown and treated like a
breakpoint.
This fixes:
- breakpoints not set by ddb, including the main one in kdb_enter(),
were treated as single-steps and not stopped on when stepping
(except for the usual, simple case of a step with residual count 1).
As special cases, kdb_enter() didn't stop for fatal traps or panics
- similarly for "hardware breakpoints".
Use a new MD macro IS_SSTEP_TRAP(type, code) to code to classify
single-steps. This is excessively complicated for bug-for-bug and
backwards compatibilty. Design errors apparently started in Mach
in ~1990 or perhaps in the FreeBSD interface in ~1993. Common trap
types like single steps should have a unique MI code (like the TRAP*
codes for user SIGTRAP) so that debuggers don't need macros like
IS_SSTEP_TRAP() to decode them. But 'type' is actually an ambiguous
MD trap number, and code was always 0 (now it is (int)%dr6 on x86).
So it was impossible to determine the trap type from the args.
Global variables had to be used.
There is already a classification macro db_pc_is_single_step(), but
this just gets in the way. It is only used to recover from bugs in
IS_BREAKPOINT_TRAP(). On some arches, IS_BREAKPOINT_TRAP() just
duplicates the ambiguity in 'type' and misclassifies single-steps as
breakpoints. It defaults to 'false', which is the opposite of what is
needed for bug-for-bug compatibility.
When this is cleaned up, MI classification bits should be passed in
'code'. This could be done now for positive-logic bits, since 'code'
was always 0, but some negative logic is needed for compatibility so
a simple MI classificition is not usable yet.
After reading %dr6, clear the single-step bit in it so that the type
of the next debugger trap can be decoded. This is a little
ddb-specific. ddb doesn't understand the need to clear this bit and
doing it before calling kdb is easiest. gdb would need to reverse
this to support hardware breakpoints, but it just doesn't support
them now since gdbstub doesn't support %dr*.
Fix a bug involving %dr6: when emulating a single-step trap for vm86,
set the bit for it in %dr6. Userland debuggers need this. ddb now
needs this for vm86 bios calls. The bit gets copied to 'code' then
cleared again.
Fix related style bugs:
- when clearing bits for hardware breakpoints in %dr6, spell the mask
as ~0xf on both amd64 and i386 to get the correct number of bits
using sign extension and not need a comment about using the wrong
mask on amd64 (amd64 traps for invalid results but clearing the
reserved top bits didn't trap since they are 0).
- rewrite my old wrong comments about using %dr6 for ddb watchpoints.
The 'cpu' and 'cpu_class' variables were always set to the same value
on amd64 and are legacy holdovers from i386. Remove them entirely on
amd64.
Reviewed by: imp, kib (older version)
Differential Revision: https://reviews.freebsd.org/D7888
SEL_UPL and sometimes PSL_VM. This is just a style change on amd64,
but on i386 it fixes 1 unimportant place where the PSL_VM check was
missing and starts fixing 1 important place where the PSL_VM check
had a logic error.
Fix logic errors in treating vm86 bioscall mode as kernel mode. The
main place checked all the necessary flags, but put the necessary
parentheses for the PSL_VM and PCB_VM86CALL checks in the wrong
place. The broken case is only reached if a vm86 bioscall uses a
%cs which is nonzero mod 4, but that is unusual -- most bios calls
start with %cs = 0xc000 or 0xf000 and rarely change it. Another
place was missing the check for PCB_VM86CALL, but was only reachable
if there are bugs virtualizing PSL_I.
Add a macro TF_HAS_STACKREGS() and use this instead of converting
open-coded checks of SEL_UPL, etc. to TRAPF_USERMODE() when we only
care about whether the frame has stack registers. This fixes 3
places in my recent fix for register variables in vm86 mode where I
messed up the PSL_VM check and cleans up other places.
Move PMAP_TS_REFERENCED_MAX out of the various pmap implementations and
into vm/pmap.h, and describe what its purpose is. Eliminate the archaic
"XXX" comment about its value. I don't believe that its exact value, e.g.,
5 versus 6, matters.
Update the arm64 and riscv pmap implementations of pmap_ts_referenced()
to opportunistically update the page's dirty field.
On amd64, use the PDE value already cached in a local variable rather than
dereferencing a pointer again and again.
Reviewed by: kib, markj
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D7836
In vm86.c, fix 2 (rarely used) cases where the return code lost the
single-step indicator. While here, fix 2 misspellings of PSL_T as
PSL_TF (TF is the CPU manufacturer's spelling, but we use T).
In trap.c, turn T_PROTFLT and T_STKFLT into T_TRCTRAP if
vm86_emulate() asked for this (it does this when the instruction is
being traced and was successully emulated). In the kernel case, we
used to deliver the trap as SIGTRAP to the process, where it always
terminated the process; now we deliver the trap as T_TRCTRAP to kdb,
where it normally gives single-stepping. In the user case, the only
difference is that we now clear PSL_T and initialize ucode properly.
Reviewed by: kib
Idle page zeroing has been disabled by default on all architectures since
r170816 and has some bugs that make it seemingly unusable. Specifically,
the idle-priority pagezero thread exacerbates contention for the free page
lock, and yields the CPU without releasing it in non-preemptive kernels. The
pagezero thread also does not behave correctly when superpage reservations
are enabled: its target is a function of v_free_count, which includes
reserved-but-free pages, but it is only able to zero pages belonging to the
physical memory allocator.
Reviewed by: alc, imp, kib
Differential Revision: https://reviews.freebsd.org/D7714
dependent pmap_ts_referenced() so that it updates the page's dirty field
if a modified bit is found while counting reference bits. This
opportunistic update can be performed at low cost and can eliminate the
need for some future calls to pmap_is_modified() by the machine-
independent layer.
Reviewed by: kib, markj
MFC after: 3 weeks
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D7722
for zeroing pages in idle where nontemporal writes are clearly best.
This is almost a no-op since zeroing in idle works does nothing good
and is off by default. Fix END() statement forgotten in previous
commit.
Align the loop in sse2_pagezero(). Since it writes to main memory,
the loop doesn't have to be very carefully written to keep up.
Unrolling it was considered useless or harmful and was not done on
i386, but that was too careless.
Timing for i386: the loop was not unrolled at all, and moved only 4
bytes/iteration. So on a 2GHz CPU, it needed to run at 2 cycles/
iteration to keep up with a memory speed of just 4GB/sec. But when
it crossed a 16-byte boundary, on old CPUs it ran at 3 cycles/
iteration so it gave a maximum speed of 2.67GB/sec and couldn't even
keep up with PC3200 memory. Fix the alignment so that it keep up with
4GB/sec memory, and unroll once to get nearer to 8GB/sec. Further
unrolling might be useless or harmful since it would prevent the loop
fitting in 16-bytes. My test system with an old CPU and old DDR1 only
needed 5+ GB/sec. My test system with a new CPU and DDR3 doesn't need
any changes to keep up ~16GB/sec.
Timing for amd64: with 8-byte accesses and newer faster CPUs it is
easy to reach 16GB/sec but not so easy to go much faster. The
alignment doesn't matter much if the CPU is not very old. The loop
was already unrolled 4 times, but needs 32 bytes and uses a fancy
method that doesn't work for 2-way unrolling in 16 bytes. Just
align it to 32-bytes.
Early use of vm86 depends on the PIC being reset to mask interrupts,
but r286667 moved PIC initialization to after where vm86 may be first
used.
Move the PIC initialization up to immdiately before vm86 initialization.
All invocations of diff that I tried display this move poorly so that it
looks like PIC and vm86 initialization was moved later.
r286667 was to move console initialization later. The diffs are again
unreadable -- they show a large move that doesn't seem to involve the
console. The PIC initialization stayed just below the console
initialization where it could still be debugged but no longer works.
Later console initialization breaks mainly debugging vm86 initialization
and memory sizing using ddb and printf(). There are several printf()s
in the memory sizing that now go nowhere since message buffer
initialization has always been too late. Memory sizing is done by loader
for most users, but the lost messages for this case are even more
interesting than for an auto-probe since they tell you what the loader
found.
vm86 uses the tss, but r273995 moved tss initialization to after where
it may be first used, just because tss_esp0 now depends on later
initializations and/or amd64 does it later.
vm86 is first used for memory sizing in cases where the loader can't
figure out the size or is not used. Its initialization is placed
immediately before memory sizing to support this, and the tss was
initialized a little earlier.
Move everything in the tss initialization except for tss_esp0 back to
almost where it was, immediately before vm86 initialization (the
combined move is from before dblflt_tss initialization to after). Add
only early initialization of tss_esp0, later reloading of the tss, and
comments. The initial tss_esp0 no longer has space for the pcb since
initially the size of the pcb is not known and no pcb is needed.
(Later changes broke debugging at this point, so the nonexistent pcb
cannot be used by debuggers, and at the time of 273995 when ddb was
almost able to debug this problem it didn't need the pcb.) The
iniitial tss_esp0 still has a magic 16 bytes reserved for vm86
although I think this is unused too.
In all of these source files, the userspace pointer size corresponds
with the kernelspace pointer size, meaning that casting directly works.
As I'm planning on making 32-bit execution on 64-bit systems work as
well, use TO_PTR() here as well, so that the changes between source
files remain minimal.
Move msix_disable_migration under #ifdef SMP since it doesn't make sense
for !SMP kernels.
PR: 212014
Reported by: Glyn Grinstead <glyn@grinstead.org>
MFC after: 3 days
Copy over amd64's cloudabi64_sysvec.c into i386 and tailor it to work.
Again, we use a system call convention similar to FreeBSD, except that
there is no support for indirect system calls (%eax == 0).
Where i386 differs from amd64 is that we have to store thread/process
entry arguments on the stack instead of using registers. We also have to
put an extra pointer on the stack for TLS (for GSBASE). Place that
pointer in the empty slot that is normally used to hold return
addresses. That seems to keep the code simple.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D7590
This driver only supports 10Mb Ethernet using PIO (the hardware supports
DMA, but the driver only does PIO). There are not any PCCard adapters
supported by this driver, only ISA cards. In addition, it does not use
bus_space but instead uses bcopy with volatile pointers triggering a
host of warnings. (if_ie.c is one of 3 files always built with
-Wno-error)
Relnotes: yes
This hardware is not present on any modern systems. The driver is quite
hackish (raw inb/outb instead of bus_space, and raw inb/outb to random
I/O ports to enable ACPI since it predated proper ACPI support).
Relnotes: yes
The wl(4) driver supports pre-802.11 PCCard wireless adapters that
are slower than 802.11b. They do not work with any of the 802.11
framework and the driver hasn't been reported to actually work in a
long time.
Relnotes: yes
The si(4) driver supported multiport serial adapters for ISA, EISA, and
PCI buses. This driver does not use bus_space, instead it depends on
direct use of the pointer returned by rman_get_virtual(). It is also
still locked by Giant and calls for patch testing to convert it to use
bus_space were unanswered.
Relnotes: yes
Fix PC_REGS() so that printing of instructions works in some useful
cases. ddb only understands a single flat address space, but this
macro allows mapping $cs:$eip into vm86's flat address space well
enough for the MI parts of ddb. This doesn't work for the MD parts
that do stack traces, and there are no similar macros for data addresses.
PC_REGS() has to use the trapframe pointer instead of the pcb for this.
For other CPUs, the trapframe pointer is not available except by tracing
back to it. But tracing back through vm86 trapframes is broken even
starting with one.
exception is caught in kernel mode. There are third-party modules
which trigger the issue, and since the problem causes usermode state
corruption at least, panic in production kernels as well.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
difference between files.
For pc98, put x86/mp_x86.c into the same place as used by i386 file list.
Fix typo in comment.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Any sensible workflow will include a revision control system from which
to restore the old files if required. In normal usage, developers just
have to clean up the mess.
Reviewed by: jhb
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D7353
Set vm_guest to a new enum value (VM_GUEST_KVM) when kvm is detected and use
vm_guest in conditionals testing for KVM.
Also, fix a conditional checking if we're running in a VM which caught only
the generic VM case, but not more specific VMs (KVM, VMWare, etc.). (Spotted
by: vangyzen).
Differential revision: https://reviews.freebsd.org/D7172
Sponsored by: Dell Inc.
Approved by: kib (mentor), vangyzen (mentor)
Reviewed by: alc
MFC after: 4 weeks
If the hypervisor version is smaller than 4.6.0. Xen commits 74fd00 and
70a3cb are required on the hypervisor side for this to be fixed, and those
are only included in 4.6.0, so stay on the safe side and disable MSI-X
interrupt migration on anything older than 4.6.0.
It should not cause major performance degradation unless a lot of MSI-X
interrupts are allocated.
Sponsored by: Citrix Systems R&D
MFC after: 3 days
Reviewed by: jhb
Differential revision: https://reviews.freebsd.org/D7148
If tf_trapno contains garbage which appears to be equal to T_NMI,
e.g. due to thread previously entered kernel due to NMI, doreti
sequence skips ast, and does so until a trap or hardware interrupt
occur.
The visible effects of the issue are quite confusing. First, signals
delivery is postponed in observable ways. In particular, the
guarantee that unblocked async signals queue is flushed before a
return from syscall, is broken. Second, if there are pending signals,
all interruptible sleeps of the stuck thread are aborted immediately.
Since modern CPUs are relatively fast and tickless kernel generates
low interrupt rate, the faulty condition might exist for long time (in
an application time scale).
In collaboration with: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
FreeBSD support NX bit on X86_64 processors out of the box, for i386 emulation
use READ_IMPLIES_EXEC flag, introduced in r302515.
While here move common part of mmap() and mprotect() code to the files in compat/linux
to reduce code dupcliation between Linuxulator's.
Reported by: Johannes Jost Meixner, Shawn Webb
MFC after: 1 week
XMFC with: r302515, r302516
In Linux if this flag is set, PROT_READ implies PROT_EXEC for mmap().
Linux/i386 set this flag automatically if the binary requires executable stack.
READ_IMPLIES_EXEC flag will be used in the next Linux mmap() commit.
mp_maxid or CPU_FOREACH() as appropriate. This fixes a number of places in
the kernel that assumed CPU IDs are dense in [0, mp_ncpus) and would try,
for example, to run tasks on CPUs that did not exist or to allocate too
few buffers on systems with sparse CPU IDs in which there are holes in the
range and mp_maxid > mp_ncpus. Such circumstances generally occur on
systems with SMT, but on which SMT is disabled. This patch restores system
operation at least on POWER8 systems configured in this way.
There are a number of other places in the kernel with potential problems
in these situations, but where sparse CPU IDs are not currently known
to occur, mostly in the ARM machine-dependent code. These will be fixed
in a follow-up commit after the stable/11 branch.
PR: kern/210106
Reviewed by: jhb
Approved by: re (glebius)
threads, to make it less confusing and using modern kernel terms.
Rename the functions to reflect current use of the functions, instead
of the historic KSE conventions:
cpu_set_fork_handler -> cpu_fork_kthread_handler (for kthreads)
cpu_set_upcall -> cpu_copy_thread (for forks)
cpu_set_upcall_kse -> cpu_set_upcall (for new threads creation)
Reviewed by: jhb (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Approved by: re (hrs)
Differential revision: https://reviews.freebsd.org/D6731
