to be assigned to a non-default FIB instance.
You may need to recompile world or ports due to the change of struct ifnet.
Submitted by: cjsp
Submitted by: Alexander V. Chernikov (melifaro ipfw.ru)
(original versions)
Reviewed by: julian
Reviewed by: Alexander V. Chernikov (melifaro ipfw.ru)
MFC after: 2 weeks
X-MFC: use spare in struct ifnet
This option will enable Capsicum capabilities, which provide a fine-grained
mask on operations that can be performed on file descriptors.
Approved by: mentor (rwatson), re (Capsicum blanket ok)
Sponsored by: Google Inc
The cioctl() hook can be used by drivers to add ioctls to the *.init and
*.lock devices. This commit breaks the ttydevsw ABI, since this
structure didn't provide any padding. To prevent ABI breakage in the
future, add a tsw_spare.
Submitted by: Peter Jeremy <peter jeremy alcatel lucent com>
Obtained from: kern/152254 (slightly modified)
erratum causing them to trigger stray vector interrupts accompanied by a
state in which they even fault on locked TLB entries. Just retrying the
instruction in that case gets the CPU back on track though. OpenSolaris
also just ignores a certain number of stray vector interrupts.
While at it, implement the stray vector interrupt handling for SPARC64-VI
which use these for indicating uncorrectable errors in interrupt packets.
the TLBs in order to get rid of the user mappings but instead traverse
them an flush only the latter like we also do for the Spitfire-class.
Also flushing the unlocked kernel entries can cause instant faults which
when called from within cpu_switch() are handled with the scheduler lock
held which in turn can cause timeouts on the acquisition of the lock by
other CPUs. This was easily seen with a 16-core V890 but occasionally
also happened with 2-way machines.
While at it, move the SPARC64-V support code entirely to zeus.c. This
causes a little bit of duplication but is less confusing than partially
using Cheetah-class bits for these.
- For SPARC64-V ensure that 4-Mbyte page entries are stored in the 1024-
entry, 2-way set associative TLB.
- In {d,i}tlb_get_data_sun4u() turn off the interrupts in order to ensure
that ASI_{D,I}TLB_DATA_ACCESS_REG actually are read twice back-to-back.
Tested by: Peter Jeremy (16-core US-IV), Michael Moll (2-way SPARC64-V)
- Implement -Wvariable-decl.
- Port -Wtrampolines support from gcc3.
(all three also via OpenBSD)
PR: gnu/127136, gnu/157019
Submitted by: Henning Petersen, Pedro Giffuni
MFC after: 6 weeks
addressing while reading or writing the trap frame. It's not
possible to guarantee that the one translation cache entry that
we depend on is not going to get purged by the CPU. We already
know that global shootdowns (ptc.g and/or ptc.ga) can (and will)
cause multiple TC entries to get purged and we initialize tried
to handle that by serializing kernel entry with these operations.
However, we need to serialize kernel exit as well.
But even if we can serialize, it appears that CPU threads within
a core can affect each other's TC entries beyond the global
shootdown. This would mean serializing any and all translatation
cache updates with the threads in a core with the kernel entry
and exit of any thread in that core. This is just too painful
and complicated.
Since we already properly coded for the 2 nested faults that we
can get, all we need to do is use those to obtain the physical
address of the trap frame, switch to physical mode and in that
way eliminate any further faults. The trap frame is already
aligned to 1KB boundaries to make sure we don't cross the page
boundary, this is safe to do.
We still need to serialize ptc.g or ptc.ga across CPUs because
the platform can only have 1 such operation outstanding at the
same time. We can now use a regular (spin) lock for this.
Also, it has been observed that we can get a nested TLB faults
for region 7 virtual addresses. This was unexpected. For now,
we enhance the nested TLB fault handler to deal with those as
well, but it needs to be understood.
descriptors, we will want to allocate a new descriptor without installing
it in the FD array.
Split falloc() into falloc_noinstall() and finstall(), and rewrite
falloc() to call them with appropriate atomicity.
Approved by: mentor (rwatson), re (bz)
more explicit comments about what's going on and what future maintainers
need to do when e.g. adding a new operation to a sys_machdep.c.
Approved by: mentor(rwatson), re(bz)
- Fix calculation of 1024-byte sized blocks from disk blocks shown when -h
option isn't specified. It was broken with quota64 integration.
- In prthumanval(): limit the size of a buffer passed to humanize_number()
to a width of 5 bytes but allow a shorter length if requested. That's what
users expect.
PR: bin/150151
Reviewed by: Kirk McKusick
option to vm_object_page_remove() asserts that the specified range of pages
is not mapped, or more precisely that none of these pages have any managed
mappings. Thus, vm_object_page_remove() need not call pmap_remove_all() on
the pages.
This change not only saves time by eliminating pointless calls to
pmap_remove_all(), but it also eliminates an inconsistency in the use of
pmap_remove_all() versus related functions, like pmap_remove_write(). It
eliminates harmless but pointless calls to pmap_remove_all() that were being
performed on PG_UNMANAGED pages.
Update all of the existing assertions on pmap_remove_all() to reflect this
change.
Reviewed by: kib
em drivers.
- Make the per-instance 'enable_aim' sysctl truly per-instance by having it
change a per-instance variable (which is used to control AIM) rather
than having all of the per-instance sysctls operate on a single global
variable.
Reviewed by: jfv (earlier version)
MFC after: 1 week
the AP doesn't transmit beacons.
If the AP requests a CSA (ie, a channel switch) and then enters CAC
(channel availability check) for 60 seconds, it doesn't send beacons
and it just listens for radar events (and other things which we don't
do yet.)
Now, ath_newstate() was not resetting the beacon timer config on
a transition to the RUN state when in STA mode - it was setting
sc_syncbeacon, which simply updates the beacon config from the
contents of the next received beacon.
This means the STA never generates beacon miss events.
If the AP goes into CAC for 60 seconds and recovers, the STA will
happily receive the first beacon and reconfigure timers.
But if it gets a radar event after that, it'll change channel
again, not notify the station that it's changed channel..
and since the station is happily waiting for the first beacon
to configure the beacon timer details from, it won't ever
generate a beacon miss interrupt and it'll sit there forever
(or until the AP appears on that channel once again.)
This change forces the last known beacon timer config to be
written to hardware on a transition from CSA->RUN in STA mode.
This forces bmiss events to occur and the STA will eventually
(after a handful of beacon miss events) begin scanning for
another access point.
to do with global namespaces) and CAPABILITIES (which has to do with
constraining file descriptors). Just in case, and because it's a better
name anyway, let's move CAPABILITIES out of the way.
Also, change opt_capabilities.h to opt_capsicum.h; for now, this will
only hold CAPABILITY_MODE, but it will probably also hold the new
CAPABILITIES (implying constrained file descriptors) in the future.
Approved by: rwatson
Sponsored by: Google UK Ltd
for resolving by a child process that, upon success, will add the entry
to the config of the running running parent process.
Unfortunately there are a couple of bugs with this, fixed in various
later versions of upstream in potentially different ways due to other
code changes:
1) Upon server [-46] <FQDN> the [-46] are used as FQDN for later resolving
which does not work. Make sure we always pass the name (or IP there).
2) The intermediate file to carry the information to the child process
does not know about -4/-6 restrictions, so that a dual-stacked host
could resolve to an IPv6 address but that might be unreachable (see
r223626) leading to no working synchronization ignoring a IPv4 record.
Thus alter the intermediate format to also pass the address family
(AF_UNSPEC (default), AF_INET or AF_INET6) to the child process
depending on -4 or -6.
3) Make the child process to parse the new intermediate file format and
save the address family for getaddrinfo() hints flags.
4) Change child to always reload resolv.conf calling res_init() before
trying to resolve names. This will pick up resolv.conf changes or
new resolv.confs should they have not existed or been empty or
unusable on ntp startup. This fix is more conditional in upstream
versions but given FreeBSD has res_init there is no need for the
configure logic as well.
Approved by: roberto
Sponsored by: Sandvine Incorporated
MFC after: 9 days
possible to organize subroutines with rules.
The "call" action saves the current rule number in the internal
stack and rules processing continues from the first rule with
specified number (similar to skipto action). If later a rule with
"return" action is encountered, the processing returns to the first
rule with number of "call" rule saved in the stack plus one or higher.
Submitted by: Vadim Goncharov
Discussed by: ipfw@, luigi@
This is really a new name for SNDCTL_DSP_RESET.
And this what commit r222723 should really have been in the first place.
PR: kern/156874
Submitted by: gerald
MFC after: 1 week
The commit intended to add SNDCTL_DSP_HALT, but actually added
SNDCTL_SEQ_HALT, which is not defined in the OSS specs.
Reported by: Pan Tsu <inyaoo@gmail.com>
Pointyhat to: gerald, avg
This fixes the problem, when the secondary GPT header is not erased when
partition table destroyed. Move equal operations from g_part_gpt_create
and g_part_gpt_recover to the separate function g_gpt_set_defaults.
Reported by: dwhite
MFC after: 1 week
mode attribute in as 0 when doing writes. The change adds
the Mode attribute plus the others except Owner and Owner_group
to the list requested by the NFSv4 Write Operation. This fixed
a problem where an executable file built by "cc" would get mode
0111 instead of 0755 for some NFSv4 servers.
Found at the recent NFSv4 interoperability Bakeathon.
Tested by: tdh at excfb.com
MFC after: 2 weeks
disk if needed. This should fix a potential case when extents are cleared in
activemap but metadata is not updated on disk.
Suggested by: pjd
Approved by: pjd (mentor)
stating if we need to update activemap on disk. This makes keepdirty
serve its purpose -- to reduce number of metadata updates.
Discussed with: pjd
Approved by: pjd (mentor)
