lobotomized environment, say booted from a floppy with no /etc full
of password and group files, give sensible fallbacks for roots uid
and operators gid.
This might fix sysinstall.
this makefile update which should have been together with the file
removal.
Removed vlimit.3 and vtimes.3. Removed vlimit.c and vtimes.c from
the "MISSING" list. These were old variants of get/setrlimit() and
getrusage(), respectively, and were never implemented in FreeBSD.
vlimit.3 referred to <sys/vlimit.h> which was removed recently.
vtimes.3 referred to <sys/vtimes.h> which never existed in FreeBSD.
the "MISSING" list. These were old variants of get/setrlimit() and
getrusage(), respectively, and were never implemented in FreeBSD.
vlimit.3 referred to <sys/vlimit.h> which was removed recently.
vtimes.3 referred to <sys/vtimes.h> which never existed in FreeBSD.
o Cancellation flags were not getting properly set/cleared.
o Loops waiting for internal locks were not being exited
correctly by a cancelled thread.
o Minor spelling (cancelation -> cancellation) and formatting
corrections (missing tab).
Found by: tg
Reviewed by: jasone
o Don't call signal handlers with the signal handler access lock
held.
o Remove pending signals before calling signal handlers. If
pending signals were not removed prior to handling them,
invocation of the handler could cause the handler to be
called more than once for the same signal. Found by: JB
o When SIGCHLD arrives, wake up all threads in PS_WAIT_WAIT
(wait4).
PR: bin/15328
Reviewed by: jasone
IPv6 specific library functions addition.
(getnameinfo(), getaddrinfo(), and IPv6 transport support is not yet)
Reviewed by: freebsd-arch, cvs-committers
Obtained from: KAME project
__setjmp, __longjmp, __sigsetjmp, and __siglongjmp, respectively.
This supports cancellation in the linuxthreads port. In the long run,
a much more comprehensive solution will necessitate more dramatic changes
to libc symbol naming, and these aliases will probably need modification
at that time.
MAN8+= rstat_svc.8
The file it talks about doesn't exist on FreeBSD, so there's no point in
installing the manual page. There was already a comment to this effect in
this file, but the entry hadn't been commented out.
rstat.1 and rstat_svc.8 can probably actually be removed.
PR: docs/13767
Submitted by: Seth <seth@freebie.dp.ny.frb.org>
madvise().
This feature prevents the update daemon from gratuitously flushing
dirty pages associated with a mapped file-backed region of memory. The
system pager will still page the memory as necessary and the VM system
will still be fully coherent with the filesystem. Modifications made
by other means to the same area of memory, for example by write(), are
unaffected. The feature works on a page-granularity basis.
MAP_NOSYNC allows one to use mmap() to share memory between processes
without incuring any significant filesystem overhead, putting it in
the same performance category as SysV Shared memory and anonymous memory.
Reviewed by: julian, alc, dg
is good for... :-)), I discovered that part of the change when mkstemps()
was brought in was missed - it was missing the termination case to make
sure it doesn't walk into the suffix. This isn't the same code OpenBSD
has, I think this is a little better as we terminate the loop in a better
spot.
Discuss in the BUGS section of the manpage, problems involved with
the use of %C, %e, %l, %p, %U and %W.
PR: 13901
Reported by: scott@chronis.pobox.com
Before this change, a signal was delivered to each thread that
didn't have the signal masked. Signals also improperly woke up
threads waiting on I/O. With this change, signals are now
handled in the following way:
o If a thread is waiting in a sigwait for the signal,
then the thread is woken up.
o If no threads are sigwait'ing on the signal and a
thread is in a sigsuspend waiting for the signal,
then the thread is woken up.
o In the case that no threads are waiting or suspended
on the signal, then the signal is delivered to the
first thread we find that has the signal unmasked.
o If no threads are waiting or suspended on the signal,
and no threads have the signal unmasked, then the signal
is added to the process wide pending signal set. The
signal will be delivered to the first thread that unmasks
the signal.
If there is an installed signal handler, it is only invoked
if the chosen thread was not in a sigwait.
In the case that multiple threads are waiting or suspended
on a signal, or multiple threads have the signal unmasked,
we wake up/deliver the signal to the first thread we find.
The above rules still apply.
Reported by: Scott Hess <scott@avantgo.com>
Reviewed by: jb, jasone
the environment. This allows big ID warnings to be suppressed for
vipw and chpass as well.
Since the environment variable test is only performed for callers
of pw_scan() that do not set pw_big_ids_warning, the test can still
be overriden. Currently, chpass and pwd_mkdb are the only users
of pw_scan() and neither of them overrides the environment variable
test.
NGM_BINARY2ASCII, which convert control messages to ASCII and back.
This allows control messages to be sent and received in ASCII form
using ngctl(8), which makes ngctl a lot more useful.
This also allows all the type-specific debugging code in libnetgraph
to go away -- instead, we just ask the node itself to do the ASCII
translation for us.
Currently, all generic control messages are supported, as well as
messages associated with the following node types: async, cisco,
ksocket, and ppp.
See /usr/share/examples/netgraph/ngctl for an example of using this.
Also give ngctl(8) the ability to print out incoming data and
control messages at any time. Eventually nghook(8) may be subsumed.
Several other misc. bug fixes.
Reviewed by: julian
readdir_r is not POSIX according to POSIX_SOURCE, bruce says:
> readdir_r() is in the _POSIX_SOURCE section, but is not a POSIX.1-1990
> function. It's POSIX.1-1996 so it should be under a different feature
> test which we don't support yet.
make sure errno is saved so that its contents are cleared unless
necessary.
Submitted by: bde
"login auth sufficient pam_ssh.so" to your /etc/pam.conf, and
users with a ~/.ssh/identity can login(1) with their SSH key :)
PR: 15158
Submitted by: Andrew J. Korty <ajk@waterspout.com>
Reviewed by: obrien
to use mmap(..., MAP_STACK, ...) on alpha too since that should work
now.
* Add hooks to allow GDB to access the internals of pthreads without
having to know the exact layout of struct pthread.
Reviewed by: deischen
eischen (Daniel Eischen) added wrappers to protect against cancled
threads orphaning internal resources.
the cancelability code is still a bit fuzzy but works for test
programs of my own, OpenBSD's and some examples from ORA's books.
add readdir_r to both libc and libc_r
add some 'const' attributes to function parameters
Reviewed by: eischen, jasone
with NetBSD and the Single Unix Specification v2.
This updates some structures with other, almost equivalent types and
effort is under way to get the whole more consistent.
Also removes a double definition of INET6 and some other clean-ups.
Reviewed by: green, bde, phk
Some part obtained from: NetBSD, SUSv2 specification
happy with how this end up and will re-visit the entire empty field
problem, but this patch solves the NIS problem for now.
Submitted by: Dan Nelson <dan@emsphone.com>
PR: 14865,14984
mode. This addresses a well-known race condition that can cause
servers to hang in accept(). The relevant case is when somebody
connects to the server and then immediately kills the connection
by sending a TCP reset. On the server this causes select to report
a ready condition on the socket, after which the accept call blocks
because there is no longer any pending connection to accept.
In -current there is already a work-around for this in the kernel.
It was merged into -stable some time ago, but then David Greenman
reverted it because it seemed to be causing a socket leak in some
cases. (See uipc_socket.c revision 1.51.2.3.) Hence this userland
fix is needed in -stable, and I plan to merge it into that branch
soon because it fixes a potential DoS attack. It may also be needed
in -current if the suspected socket leak turns out to be real. In
any case, after thinking it over I believe the fix belongs in
userland. An application shouldn't assume that a ready return from
select guarantees that the subsequent I/O operation cannot block.
A lot can happen between the select and the accept.
A similar fix should most likely be applied to the Unix domain
socket transport too.
Submitted by: peter
Reviewed by: jdp
It used to loop back up to the accept() call and block there,
shutting out all other transports until a new connection came in.
Now it returns instead after dropping the connection. That will
take it back to the select() loop where all transports can be
serviced. I intend to MFC this within a day or two since it
fixes a DoS vulnerability.
This fixes some nasty procfs problems for SMP, makes ps(1) run much faster,
and makes ps(1) even less dependent on /proc which will aid chroot and
jails alike.
To disable this facility and revert to previous behaviour:
sysctl -w kern.ps_arg_cache_limit=0
For full details see the current@FreeBSD.org mail-archives.
All Makefiles now use MACHINE_ARCH for the target architecture.
Unification is required for cross-building.
Tags added to:
sys/boot/Makefile
sys/boot/arc/loader/Makefile
sys/kern/Makefile
usr.bin/cpp/Makefile
usr.bin/gcore/Makefile
usr.bin/truss/Makefile
usr.bin/gcore/Makefile:
fixed typo: MACHINDE -> MACHINE_ARCH
which is zero-based.
Correct the range checking for the value taken for %S.
Add %w for the day of the week (0-6).
Accept (but do nothing with) %U and %W. The comment for this change was
taken from NetBSD.
These changes were made after several failed attempts to contact the
author of our strptime.c .
PR: 10131
Submitted by: tadf@kt.rim.or.jp (Tadayoshi Funaba)
It adds new functions and extend some structures and can handle
VESA modes.
- Update the man page.
- Bump the library version number.
(The old version will be added to compat3x.)
of the /etc/radius.conf file. But the code contains hacks for
backward compatibility, so old files will continue to work.
I updated the man pages and made a couple of minor changes, but
everything else was submitted by Oleg.
PR: misc/14284
Submitted by: Oleg Semyonov <os@altavista.net>
should close all outstanding PRs on incorrect inet_aton behavior, and
since it has a decent parsing routine, doesn't allow some hysterically
working behavior.
PR: 13628
Submitted by: Adrian Chadd <adrian@FreeBSD.org>
two subsections: SINOPSIS (declarations) and DESCRIPTION (descriptions)
All functions now mentioned in NAME section (apropos capable manpage :)
Various mdoc fixe
Been in production for 3 years now. Gives Instant Frame relay to if_sr
and if_ar drivers, and PPPOE support soon. See:
ftp://ftp.whistle.com/pub/archie/netgraph/index.html
for on-line manual pages.
Reviewed by: Doug Rabson (dfr@freebsd.org)
Obtained from: Whistle CVS tree
next try over chroot (descriptor closed). getgrnam() used already handles
endgrent() properly and honors _gr_stayopen. Automatically call
setgroupent(1) when _pw_stayopen is set (for YP/NIS code).
