The later firmware devices (including iwn!) support multiple configuration
contexts for a lot of things, leaving it up to the firmware to decide
which channel and vap is active. This allows for things like off-channel
p2p sta/ap operation and other weird things.
However, net80211 is still focused on a "net80211 drives all" when it comes to driving
the NIC, and as part of this history a lot of these options are global and not per-VAP.
This is fine when net80211 drives things and all VAPs share a single channel - these
parameters importantly really reflect the state of the channel! - but it will increasingly
be not fine when we start supporting more weird configurations and more recent NICs.
Yeah, recent like iwn/iwm.
Anyway - so, migrate all of the HT protection, legacy protection and preamble
stuff to be per-VAP. The global flags are still there; they're now calculated
in a deferred taskqueue that mirrors the old behaviour. Firmware based drivers
which have per-VAP configuration of these parameters can now just listen to the
per-VAP options.
What do I mean by per-channel? Well, the above configuration parameters really
are about interoperation with other devices on the same channel. Eg, HT protection
mode will flip to legacy/mixed if it hears ANY BSS that supports non-HT stations or
indicates it has non-HT stations associated. So, these flags really should be
per-channel rather than per-VAP, and then for things like "do i need short preamble
or long preamble?" turn into a "do I need it for this current operating channel".
Then any VAP using it can query the channel that it's on, reflecting the real
required state.
This patch does none of the above paragraph just yet.
I'm also cheating a bit - I'm currently not using separate taskqueues for
the beacon updates and the per-VAP configuration updates. I can always further
split it later if I need to but I didn't think it was SUPER important here.
So:
* Create vap taskqueue entries for ERP/protection, HT protection and short/long
preamble;
* Migrate the HT station count, short/long slot station count, etc - into per-VAP
variables rather than global;
* Fix a bug with my WME work from a while ago which made it per-VAP - do the WME
beacon update /after/ the WME update taskqueue runs, not before;
* Any time the HT protmode configuration changes or the ERP protection mode
config changes - schedule the task, which will call the driver without the
net80211 lock held and all correctly serialised;
* Use the global flags for beacon IEs and VAP flags for probe responses and
other IE situations.
The primary consumer of this is ath10k. iwn could use it when sending RXON,
but we don't support IBSS or AP modes on it yet, and I'm not yet sure whether
it's required in STA mode (ie whether the firmware parses beacons to change
protection mode or whether we need to.)
Tested:
* AR9280, STA/AP
* AR9380, DWDS STA+STA/AP
* ath10k work, STA/AP
* Intel 6235, STA
* Various rtwn / run NICs, DWDS STA and STA configurations
The global counters were not SMP-friendly. Use per-CPU counters
instead.
Reviewed by: jhb
Sponsored by: Rubicon Communications, LLC (Netgate)
Differential Revision: https://reviews.freebsd.org/D25466
The zfs reader development did reach to the point where linking boot1,
we will get errors about duplicate symbols Malloc, Free, Calloc.
We can just use libsa version, just as loader.efi does. The only concern is,
libsa zalloc is using fixed size heap region, I did pick 64MB as other
stage instances are using, but this size is likely not optimal. In any case,
with limited memory setups, we should boot loader.efi directly.
Sponsored by: Netflix, Klara Inc.
This is to silence down some Chromium assertions.
PR: kern/240991
Analyzed by: Alex S <iwtcex@gmail.com>
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D25256
Create an acpi attachment for the DWC USB OTG device. This is present in
the Raspberry Pi 4 in the USB-C port normally used to power the board. Some
firmware presents the kernel with ACPI tables rather than FDT so we need
an ACPI attachment.
Submitted by: Greg V <greg_unrelenting.technology>
Approved by: hselasky (removal of All rights reserved)
Differential Revision: https://reviews.freebsd.org/D25203
The counters are exported by a sysctl and have the same width on all
platforms anyway.
Reviewed by: cem, delphij, jhb
Sponsored by: Rubicon Communications, LLC (Netgate)
Differential Revision: https://reviews.freebsd.org/D25465
It was added a very long time ago. It is single-threaded, so only
really useful for basic measurements, and in the meantime we've gotten
some more sophisticated profiling tools.
Reviewed by: cem, delphij, jhb
Sponsored by: Rubicon Communications, LLC (Netgate)
Differential Revision: https://reviews.freebsd.org/D25464
This adjusts freebsd-update.conf and portsnap.conf files in EC2 AMIs to
point at the new AWS-hosted mirror network.
Approved by: re (delphij)
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D25498
dumpon has accepted device names without the prefix ever since r291207.
Since dumpon and savecore are always paired, they ought to accept the same
arguments. Prior to this change, specifying 'dumpdev="da3"' in
/etc/rc.conf, for example, would result in dumpon working just fine but
savecore complaining that "Dump device does not exist".
PR: 247618
Reviewed by: cem, bcr
MFC after: 2 weeks
Sponsored by: Axcient
Differential Revision: https://reviews.freebsd.org/D25500
LIST_FOREACH_SAFE() is not safe in the presence
of other threads removing list entries when a
mutex is released.
This is not in the critical path, so just restart
the scan each time we drop the lock, rather than
using a marker.
Reviewed by: jhb, markj
Sponsored by: Netflix
When the RISC-V port was initially committed to FreeBSD, GCC would
generate 64-bit long doubles, and the definitions in _fpmath.h reflected
that. This was changed to 128-bit in GCC later that year [1], but the
definitions were never updated, despite the documented workaround. This
causes printf(3) and friends to interpret only the low 64-bits of a long
double in ldtoa, thereby printing incorrect values.
Update the definitions now that both clang and GCC generate 128-bit long
doubles.
[1] 54b21fc5ae
PR: 242067
Reported by: Dennis Clarke <dclarke@blastwave.org>
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D25420
rpokala notes that splitting the definitions like this is kind of silly,
since the comment applies to both. Move the comment up (or the definition
down, depending on your perspective on life) accordingly.
Reported by: rpokala
This was added in r293648 to pass -mlong-calls for crt1.o and gcrt1.o.
The use of -mlong-calls was removed in r358851 for LLVM 10.0, leaving
STATIC_CFLAGS empty.
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D25305
* Add examples showing the use of -f, -C, -s, -n
* Rework the two already present examples that were *format* examples
* Remove .Tn suggested by mandoc(1)
* Remove reference to gdb(1) since it is not present in current
Approved by: manpages (gbe)
Differential Revision: https://reviews.freebsd.org/D25406
A file update in 2018 broke many ports as it misidentified shared
libraries as PIE binaries. r333944 reverted part of the change,
restoring ports builds but misidentifying objects in the opposite
direction.
Earlier this month file 5.39 was imported, and then the change
originally from r333944 was recommitted as r362261. However, the
issue was fixed upstream, so r362261 serves no purpose.
PR: 246960, 247461 [exp-run]
Sponsored by: The FreeBSD Foundation
Expand the mentioned RFC in the SEE ALSO section
and reference RFC1701 and RFC1702.
PR: 240250
Reviewed by: bcr (mentor)
Approved by: bcr (mentor)
Obtained from: OpenBSD
MFC after: 7 days
Differential Revision: https://reviews.freebsd.org/D25504
In preparation for using ifuncs in the kernel is is useful to have a common
view of the arm64 ID registers across all CPUs. Add this and extract the
logic for finding the lower value of two fields to a new helper function.
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D25463
This effectively mirrors our libc implementation, but with minor fudging --
name needs to be copied in from userspace, so we just copy it straight into
stack-allocated memfd_name into the correct position rather than allocating
memory that needs to be cleaned up.
The sealing-related fcntl(2) commands, F_GET_SEALS and F_ADD_SEALS, have
also been implemented now that we support them.
Note that this implementation is still not quite at feature parity w.r.t.
the actual Linux version; some caveats, from my foggy memory:
- Need to implement SHM_GROW_ON_WRITE, default for memfd (in progress)
- LTP wants the memfd name exposed to fdescfs
- Linux allows open() of an fdescfs fd with O_TRUNC to truncate after dup.
(?)
Interested parties can install and run LTP from ports (devel/linux-ltp) to
confirm any fixes.
PR: 240874
Reviewed by: kib, trasz
Differential Revision: https://reviews.freebsd.org/D21845
The NVMe specification requires unused entries in the Identify, Active
Namespace ID data to be zero. Fix is bzero the provided page, similar to
what is done for the Namespace Descriptors list.
Fixes UNH Tests 2.6 and 2.9
Tested by: Jason Tubnor
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24901
Dataset Management range specifications may have a zero length (a.k.a.
an empty range definition). Handle the case of all ranges being empty by
completing with Success (DSM commands are advisory only). For
Deallocate, skip empty range definitions when sending TRIM's to the
backing storage.
Fixes UNH Test 2.2.4
Reviewed by: imp
Tested by: Jason Tubnor
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24900
If the Predictable Latency Mode is not supported, NVMe Controllers must
return Invalid Field in Command status for the Get Features command
with IDs:
- Predictable Latency Mode Config
- Predictable Latency Mode Window
Fixes UNH Tests 3.6
Tested by: Jason Tubnor
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24899
This adds support for NVMe Get Features, Interrupt Vector Config
parameter error checking done by the UNH compliance tests.
Fixes UNH Tests 1.6.8 and 5.5.6
Tested by: Jason Tubnor
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24898
This commit updates the Identify Controller data to advertise the
Controller supports a single firmware slot and that firmware slot 1 is
read-only. Additionally, it returns an "Invalid Firmware Slot" error
when the host issues any Firmware Commit command (a.k.a. Firmware
Activate).
Fixes UNH Test 5.5.3
Tested by: Jason Tubnor
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24897
This adds support to bhyve's NVMe device emulation for processing Async
Event Requests but not returning them (i.e. Async Event Notifications).
Fixes UNH Test 5.5.2
Tested by: Jason Tubnor
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24896
Add checks that the combination of Starting LBA and Number of Logical
Blocks in a command will not exceed the range of the underlying storage.
Note that because NVMe specifices the Starting LBA as a uint64_t, care
must be taken when converting it and the block count to avoid an integer
overflow.
Fixes UNH Tests 2.2.3, 2.3.2, and 2.4.2
Tested by: Jason Tubnor
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24895
SMART data in NVMe includes statistics for number of read and write
commands issued as well as the number of "data units" read and written.
NVMe defines "data unit" as thousands of 512 byte blocks (e.g. 1 data
unit is 1-1,000 512 byte blocks, 3 data units are 2,001-3,000 512 byte
blocks).
This patch implements counters for:
- Data Units Read
- Data Units Written
- Host Read Commands
- Host Write Commands
and exposes the values when the guest reads the SMART/Health Log Page.
Fixes UNH Test 1.3.8
Tested by: Jason Tubnor
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24894
For NVMe emulation, validate the Data Set Management LBA ranges do not
exceed the capacity of the backing storage. If they do, return an "LBA
Out of Range" error.
Fixes UNH Test 2.2.3
Tested by: Jason Tubnor
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24893
NVMe controllers advertise their Max Data Transfer Size (MDTS) to limit
the number of page descriptors in an I/O request. Take advantage of this
and size the struct pci_nvme_ioreq accordingly.
Ensuring these values match both future-proofs the code and allows
removing some complexity which only exists to handle this possibility.
Tested by: Jason Tubnor
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24891
Split the NVM I/O function (i.e. nvme_opc_write_read) into separate
functions - one for RAM based backing-store and another for disk based
backing-store for easier maintenance. No functional changes.
Tested by: Jason Tubnor
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24890
The Format NVM command mainly allows the host to specify the block size
and protection information used for the Namespace. As the bhyve
implementation simply maps the capabilities of the backing storage
through to the guest, there isn't anything to implement. But a side
effect of the format is the NVMe Controller shall not return any data
previously written (i.e. erase previously written data). This patch
implements this later behavior to provide a compliant implementation.
Fixes UNH Test 1.6
Tested by: Jason Tubnor
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24889
Create a generic Get/Set Features by saving off the contents of CDW11
from the Set command and returning the saved value in the completion of
the Get command. Implementation allows providing optional implementation
for both Set and Get.
Add infrastructure to determine which feature ID's are namespace
specific and flag violations of this category of error.
Also adds the feature specific behavior of Set Features, Number of
Queues to only allow this command once per Controller reset.
Fixes UNH Tests 1.2, 5.4, and 5.5.6
Tested by: Jason Tubnor
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24887
Fix the logic in nvme_opc_get_log_page to calculate the number of DWORDS
(uint32_t) instead of WORDS (uint16_t) for the byte length. And only
return the allowed number of Log Page bytes as determined by the user
request and actual size of the requested log page.
Fixes UNH Test 1.3
Tested by: Jason Tubnor
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24885