In the persist case, take the SYN and FIN flags into account when updating
the sequence space sent.
Reviewed by: gnn
MFC after: 2 weeks
Sponsored by: Juniper Networks, Netflix
Differential Revision: https://reviews.freebsd.org/D7075
Tested by: Limelight, Netflix
Introduce internal counter to track opens. Using provider's counters is
not very successfull after calling g_wither_provider().
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
Enter Capsicum capability sandbox pretty early in this setuid program.
Some minor modifications were needed to cache directory fds and use
relative lookups.
Rights restriction of the stdio descriptors is unfortunately pretty messy
because we need an ioctl capability not present in the current libcapsicum
helpers (FIODGNAME).
Reviewed by: ed
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D7999
A premature optimization lead to caching a native-sector sized memory
allocation. If the program examined a 512 byte sector disk, then a 4096
byte sector disk, the program would overrun the cached 512 byte buffer.
Just remove the optimization to fix the bug. This was introduced with the 4Kn
dump support in r298076.
Reported by: markj
Reviewed by: markj, rpokala
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D8162
When tsoome@ added skein support to the ZFS boot code and zfsloader, it
resulted in an explosion in code size, running close to a number of
limits.
The default for the C version of skein is to unroll all loops for
skein-256 and 512
Disabling the loop unrolling saves 20-28kb from each binary
boot1.efi
gptzfsboot
loader.efi
userboot.so
zfsloader
Reviewed by: emaste, tsoome
Sponsored by: ScaleEngine Inc.
Differential Revision: https://reviews.freebsd.org/D7826
When a syncid bump is pending, any write to the mirror results in the
updated syncid being written to each component's metadata block. However,
the update was only being performed after the writes to the mirror
componenents were queued. Instead, synchronously update the metadata block
first.
MFC after: 3 weeks
Sponsored by: Dell EMC Isilon
Consider a mirror with two components, m1 and m2. Suppose a hardware error
results in the removal of m2, with m1's genid bumped. Suppose further that
a replacement mirror component m3 is created and synchronized, after which
the system is shut down uncleanly. During a subsequent bootup, if gmirror
tastes m1 and m2 first, m2 will be removed from the mirror because it is
broken, but the mirror will be started without bumping the syncid on m1
because all elements of the mirror are accounted for. Then m3 will be
added to the already-running mirror with the same syncid as m1, so the
components will not be synchronized despite the unclean shutdown.
Handle this scenario by bumping the syncid of healthy components if any
broken mirrors are discovered during mirror startup.
MFC after: 3 weeks
Sponsored by: Dell EMC Isilon
The source checkout date is not particularly relevant, and this makes
groff man pages build reproducibly.
Reviewed by: bapt
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8158
Move sentence to a new line as advised by igor.
PR: 212474
Approved by: bcr (mentor)
MFC after: 5 days
Differential Revision: https://reviews.freebsd.org/D8104
I was unable to pin point the exact version of Mach the fdisk utility appeared as I could not find documentation older than version 2.5 & no source code or repo history.
fdisk utility appears as a separate utility[3] in v2.5. Due to this, I have avoided stating the exact version fdisk first appeared in Mach.
Add authors section.
[1] https://groups.google.com/d/topic/comp.unix.bsd/Hhi45vAHxDg/discussion
[2] ftp://ftp.mcs.vuw.ac.nz/doc/misc/mach-i386-doc/i386_install.ps
[3] ftp://ftp.mcs.vuw.ac.nz/doc/misc/mach-i386-doc/i386_manpages.ps
PR: 212470
Approved by: bcr (mentor)
MFC after: 5 days
Differential Revision: https://reviews.freebsd.org/D8104
I was unable to pin point the exact version of Mach the fdisk utility appeared as I could not find documentation older than version 2.5 & no source code or repo history.
fdisk utility appears as a separate utility[3] in v2.5. Due to this, I have avoided stating the exact version fdisk first appeared in Mach.
Add authors section.
Make correction pointed by igor
[1] https://groups.google.com/d/topic/comp.unix.bsd/Hhi45vAHxDg/discussion
[2] ftp://ftp.mcs.vuw.ac.nz/doc/misc/mach-i386-doc/i386_install.ps
[3] ftp://ftp.mcs.vuw.ac.nz/doc/misc/mach-i386-doc/i386_manpages.ps
PR: 212469
Approved by: bcr (mentor)
MFC after: 5 days
Differential Revision: https://reviews.freebsd.org/D8104
On some targets 'make showconfig' currently reports both 'no' and 'yes'
for some options. For example:
% make TARGET=mips showconfig | grep SSP
MK_SSP = no
MK_SSP = yes
Emit a warning on encountering a duplicated variable, and skip the
second entry.
Sponsored by: The FreeBSD Foundation
Move sentence to a new line as advised by igor.
PR: 212441
Approved by: bcr (mentor)
MFC after: 5 days
Differential Revision: https://reviews.freebsd.org/D8104
Move sentence to a new line as advised by igor
PR: 212439
Approved by: bcr (mentor)
MFC after: 5 days
Differential Revision: https://reviews.freebsd.org/D8104
- Fix RX and TX teardown:
. TX teardown would not reclaim the abandoned descriptors;
. Interrupt storms in RX teardown;
. Fixed the acknowledge of the teardown completion interrupt.
- Remove temporary lists for the descriptors;
- Simplified the descriptor handling (less writes and reads from
descriptors where possible);
- Better debug;
- Add support for the RX threshold interrupts:
With interrupt moderation only, an RX overrun is likely to happen. The
RX threshold is set to trigger a non paced interrupt everytime your RX
free buffers are under the minimum threshold, helping to prevent the rx
overrun.
The NIC now survive when pushed over its limits (where previously it would
lock up in a few seconds).
uFW (600MHz SoC) can now forward up to 560Mb/s of UDP traffic (netmap
pkt-gen as source and sink). TCP forwarding rate is over 350Mb/s.
No difference (other than CPU use) was seen on Beaglebone black (1GHz SoC)
for his fast ethernet.
Tested on: uFW, BBB
Sponsored by: Rubicon Communications, LLC (Netgate)
by vm_pageout_scan() local to vm_pageout_worker(). There is no reason
to store the pass in the NUMA domain structure.
Reviewed by: kib
MFC after: 3 weeks
KASSERT in cam_ccbq_insert_ccb that only XPT_FC_QUEUED ops are queued,
and XPT_FC_USER_CCB ops are not. Otherwise cam_ccbq_ccb_done may be
skipped.
Bounds check the index used for camq_remove in order to panic instead
of scribble on removal of an out-of-bounds index (e.g. consider the
effect of camq_remove of CAM_UNQUEUED_INDEX).
KASSERT in cam_ccbq_remove_ccb that the ccb removed by index was the
one sought.
Submitted by: Ryan Libby <rlibby@gmail.com>
Reviewed by: imp, mav
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D8151
