Commit Graph

18 Commits

Author SHA1 Message Date
Allan Jude
91dfbef4aa Fix AMD type flash write operations, and display chip information at boot
Applies to MX flash chips on AR9132 and RT3050

Submitted by:	Hiroki Mori <yamori813@yahoo.co.jp>
Reviewed by:	imp, sbruno
Differential Revision:	https://reviews.freebsd.org/D14279
2019-03-24 06:28:25 +00:00
Pedro F. Giffuni
7282444b10 sys/dev: further adoption of SPDX licensing ID tags.
Mainly focus on files that use BSD 3-Clause license.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
2017-11-20 19:36:21 +00:00
Adrian Chadd
6bf13692f9 [cfi] fix CFI flash reset command for MX29LV320T/B.
MX flash MX29LV320T/B datasheet say reset is 0xf0.

Submitted by:	Hiroki Mori <yamori813@yahoo.co.jp>
Approved by:	mizhka
Differential Revision:	https://reviews.freebsd.org/D10177
2017-05-06 05:52:01 +00:00
Adrian Chadd
3f84dfc1cd Provide a workaround for setting the correct endianness when doing CFI on
a mips big-endian board.

This is (hopefully! ish!) a temporary change until a slightly better way
can be found to express this without a config option.

Tested:

* BUFFALO WZR-HP-G300NH 1stGen (by submitter)

Submitted by:	Mori Hiroki <yamori813@yahoo.co.jp>
2016-02-04 22:39:27 +00:00
Davide Italiano
2be111bf7d Follow up to r225617. In order to maximize the re-usability of kernel code
in userland rename in-kernel getenv()/setenv() to kern_setenv()/kern_getenv().
This fixes a namespace collision with libc symbols.

Submitted by:   kmacy
Tested by:      make universe
2014-10-16 18:04:43 +00:00
Brooks Davis
1a440eb2c0 MFP4: 1136252
Add an option ATSE_CFI_HACK to allow memory mapped CFI devices to have
their address range allocated sharable so that atse(4) can find it's
Ethernet address in the expected location.

We intend to remove this hack once the BERI platform has a loader.
2013-10-18 20:52:42 +00:00
Brooks Davis
f43581345b MFP4 217312, 222008, 222052, 222053, 222673, 231484, 231491, 231565, 570643
Rework the timeout code to use actual time rather than a DELAY() loop and
to use both typical and maximum to allow logging of timeout failures.
Also correct the erase timeout, it is specified in milliseconds not
microseconds like the other timeouts.  Do not invoke DELAY() between
status queries as this adds significant latency which in turn reduced
write performance substantially.

Sanity check timeout values from the hardware.

Implement support for buffered writes (only enabled on Intel/Sharp parts
for now).  This yields an order of magnitude speedup on the 64MB Intel
StrataFlash parts we use.

When making a copy of the block to modify, also keep a clean copy around
until we are ready to commit the block and use it to avoid unnecessary
erases.  In the non-buffer write case, also use it to avoid
unnecessary writes when the block has not been erased.  This yields a
significant speedup when doing things like zeroing a block.

Sponsored by:	DARPA, AFRL
Reviewed by:	imp (previous version)
2013-09-04 17:19:21 +00:00
Brooks Davis
5faf6ff4cc MFP4 @217311
Intel and Sharp flash power on with their blocks in a "locked" state.
Unlocked them before attempting to perform an erase or write action and
relock when the action is complete.
2013-05-30 01:22:50 +00:00
Brooks Davis
c88b210b20 MFP4 change 222060:
On Intel devices, put the Factory PPR in kenv.  On some FPGA boards it may
be the only software accessable unique ID.

Sponsored by:	DARPA, AFRL
2013-04-30 18:48:11 +00:00
Jayachandran C.
9c1f1330d6 CFI fixes for big endian archs.
The flash commands and responses are little-endian and have to be
byte swapped on big-endian systems.  However the raw read of data
need not be swapped.

Make the cfi_read and cfi_write do the swapping, and provide a
cfi_read_raw which does not byte swap for reading data from
flash.
2012-03-27 15:13:12 +00:00
Warner Losh
f3a36f8193 Move from using devclass_find_free_unit(cfi_diskclass, 0) to -1, since
they have the same basic behavior.
2009-06-10 17:41:24 +00:00
Sam Leffler
f2c6781bfd Add cfid, a disk interface to CFI flash devices; this enables construction
of flash-based filesystems.

Note this is not interlocked against the raw CFI device.
2009-03-09 23:16:02 +00:00
Sam Leffler
26b3568c2f fix typo
Submitted by:	Christoph Mallon <christoph.mallon@gmx.de>
2009-02-08 20:29:37 +00:00
Sam Leffler
9313bae41d fix building w/o CFI_ARMEDANDDANGEROUS 2009-02-07 05:32:19 +00:00
Sam Leffler
bd8c9fc04d expand CFI_ARMEDANDDANGEROUS to include writing the user segment
of the PR; this register is actually write-once so deserves the
safety-belt as much as the PLR
2009-02-07 05:03:25 +00:00
Sam Leffler
63425a7f25 Add support for frobbing Intel StrataFlash Protection Registers:
o add CFI_SUPPORT_STRATAFLASH compile option to enable support
o add new ioctls to get/set the factory and user/oem segments of the PR
  and to get/set Protection Lock Register that fuses the user segment
o add #defines for bits in the status register
o update cfi_wait_ready to take an offset so it can be used to wait for
  PR write completion and replace constants w/ symbolic names

Note: writing the user segment isn't correct; committing now to get review.

Sponsored by:	Carlson Wireless
Reviewed by:	imp, Chris Anderson
2009-02-05 18:12:07 +00:00
Sam Leffler
e73090b5d3 honor any interface width (e.g. setup by the bus shim) and don't probe;
this is needed for the moment to workaround bus shim issues
2009-02-03 19:09:16 +00:00
Marcel Moolenaar
e00251b7ed Add a driver for flash memory that implements to the Common Flash
Memory Interface (CFI). The flash memory can be read and written
to through /dev/cfi# and an ioctl() exists so processes can read
the query information.
The driver supports the AMD and Intel command set, though only
the AMD command has been tested.

Obtained from:	Juniper Networks, Inc.
2008-10-25 06:18:12 +00:00