Commit Graph

368 Commits

Author SHA1 Message Date
Warner Losh
48e3ba2f5a Display CPU model in dmesg on mips targets
Also, save the CPU model for atheros ar531x boards.

Submitted by: Hiroki Mori
Differential Revision: https://reviews.freebsd.org/D20371
2019-05-24 01:43:35 +00:00
Conrad Meyer
e12be3218a Include eventhandler.h in more compilation units
This was enumerated with exhaustive search for sys/eventhandler.h includes,
cross-referenced against EVENTHANDLER_* usage with the comm(1) utility.  Manual
checking was performed to avoid redundant includes in some drivers where a
common os_bsd.h (for example) included sys/eventhandler.h indirectly, but it is
possible some of these are redundant with driver-specific headers in ways I
didn't notice.

(These CUs did not show up as missing eventhandler.h in tinderbox.)

X-MFC-With:	r347984
2019-05-21 01:18:43 +00:00
Conrad Meyer
e2e050c8ef Extract eventfilter declarations to sys/_eventfilter.h
This allows replacing "sys/eventfilter.h" includes with "sys/_eventfilter.h"
in other header files (e.g., sys/{bus,conf,cpu}.h) and reduces header
pollution substantially.

EVENTHANDLER_DECLARE and EVENTHANDLER_LIST_DECLAREs were moved out of .c
files into appropriate headers (e.g., sys/proc.h, powernv/opal.h).

As a side effect of reduced header pollution, many .c files and headers no
longer contain needed definitions.  The remainder of the patch addresses
adding appropriate includes to fix those files.

LOCK_DEBUG and LOCK_FILE_LINE_ARG are moved to sys/_lock.h, as required by
sys/mutex.h since r326106 (but silently protected by header pollution prior
to this change).

No functional change (intended).  Of course, any out of tree modules that
relied on header pollution for sys/eventhandler.h, sys/lock.h, or
sys/mutex.h inclusion need to be fixed.  __FreeBSD_version has been bumped.
2019-05-20 00:38:23 +00:00
Adrian Chadd
8771e6389b [ar71xx_gpio] Add AR9341/AR9342 to the list of chips for programming function/output enable.
This is reqired to use the gpiofunc behaviour for configuring GPIO
pins at boot time.

Submitted by:	<yamori813@yahoo.co.jp>
Differential Revision:	https://reviews.freebsd.org/D20170
2019-05-15 16:51:08 +00:00
Allan Jude
5e02af0dda The Atheros AR7241 has 20 GPIO pins
AR724X_GPIO_PINS used for this family is defined as 18
The datasheet for the AR7241 describes 20 pins, allow all to be used.

Submitted by:	Hiroki Mori <yamori813@yahoo.co.jp>
Reviewed by:	mizhka
Differential Revision:	https://reviews.freebsd.org/D17580
2019-03-25 07:48:52 +00:00
Matt Macy
381388b9c4 add snps IP uart support / genaralize UART
This is an amalgam of a patch by Doug Ambrisko to
generalize uart_acpi_find_device, imp moving the
ACPI table to uart_dev_ns8250.c and advice by jhb
to work around a bug in the EPYC 3151 BIOS
(the BIOS incorrectly marks the serial ports as
disabled)

Reviewed by: imp
MFC after: 8 weeks
Differential Revision: https://reviews.freebsd.org/D16432
2018-08-19 21:10:21 +00:00
Andriy Gapon
2559473944 follow-up to r336635, update TAILQ to CK_SLIST for ie_handlers
arm, mips and sparc64 were affected.
2018-07-23 15:36:55 +00:00
Warner Losh
eed42ff1d5 Use boot_parse_* to parse command line args and retire cut-n-paste
code that was substantially identical.

Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D16205
2018-07-13 16:43:17 +00:00
Matt Macy
239f5f541b hwpmc: yet another missed fixup 2018-06-08 18:54:47 +00:00
Matt Macy
eb7c901995 hwpmc: simplify calling convention for hwpmc interrupt handling
pmc_process_interrupt takes 5 arguments when only 3 are needed.
cpu is always available in curcpu and inuserspace can always be
derived from the passed trapframe.

While facially a reasonable cleanup this change was motivated
by the need to workaround a compiler bug.

core2_intr(cpu, tf) ->
  pmc_process_interrupt(cpu, ring, pmc, tf, inuserspace) ->
    pmc_add_sample(cpu, ring, pm, tf, inuserspace)

In the process of optimizing the tail call the tf pointer was getting
clobbered:

(kgdb) up
    at /storage/mmacy/devel/freebsd/sys/dev/hwpmc/hwpmc_mod.c:4709
4709                                pmc_save_kernel_callchain(ps->ps_pc,
(kgdb) up
1205                    error = pmc_process_interrupt(cpu, PMC_HR, pm, tf,

resulting in a crash in pmc_save_kernel_callchain.
2018-06-08 04:58:03 +00:00
Pedro F. Giffuni
19d3b47b92 sys/mips: further adoption of SPDX licensing ID tags.
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
2017-11-27 15:07:26 +00:00
Ed Maste
3460f018f9 arge: correct bzero sizeof (pointed-to object, not pointer)
Reported by:	Clang
MFC after:	1 week
Sponsored by:	The FreeBSD Foundation
2017-08-30 17:38:55 +00:00
Xin LI
e6f9d1ce45 Plug memory leak in arge_encap().
Reported by:	Ilja Van Sprundel <ivansprundel ioactive.com>
Submitted by:	Domagoj Stolfa <domagoj.stolfa gmail.com>
Reviewed by:	adrian
MFC after:	3 days
2017-08-15 06:01:36 +00:00
Adrian Chadd
e9c4d0912a [ar724x] put in explicit memory barriers now that read/write register no longer
implicitly do them.

They were removed as part of my "fix this to actually work" a few commits
ago in this file.

Tested:

* AP93, AR7240 + AR9280 PCI
2017-07-06 04:56:23 +00:00
Adrian Chadd
2e986d170b [ar71xx] undo read-after-write to flush; some bus devices dislike this.
This broke the PCI fixup on at least the AR7240 + AR9280 reference design
board that I have.

Tested:

* Atheros AP93 reference design - AR7240 + AR9280
2017-05-28 07:44:55 +00:00
Adrian Chadd
7a0466bc2b [ar71xx] remove dead code! 2017-05-23 06:20:24 +00:00
Adrian Chadd
57b8f9ca1d [ar71xx] add a very simple early boot driver called "caldata" to commit cross-layer atrocities.
The (eventually) upcoming ath(4) changes will include being able to load
ath(4) devices on the AHB bus (ie the on-die wifi part of the SoC)
as modules.

In order for this to happen, a copy of the calibration data needs to be
copied away before the SPI driver runs or the memory map access hack
won't work.

Now, ideally (!) there'd be some driver that can come up after the MTD
pieces (eg, SPI, NAND, etc) and load into a firmware chunk the calibration
data.

(Or, really really nicely, would be an actual async firmware API that
would lead itself to having a driver schedule a file read - or a raw device
read - to get to the calibration data.)

Now, until all of the above is done - I'm going to perpetuate the layer
breaking atrocity here by simply doing the PCI bus fixup EEPROM/calibration
data hack here.  This will work for any AR71xx (and later on, AR231x/AR531x)
device, as well as the handful of QCA MIPS + QCA9880v2 802.11ac boards with
NOR flash.

To use, this goes into the kernel config:

# Enable EEPROM hacks
options AR71XX_ATH_EEPROM
device ar71xx_caldata
device firmware

# This enables the ath_ahb driver (when I commit the change!) to
# pull data out of the firmware hack.
options ATH_EEPROM_FIRMWARE

In the hints file:

# ART calibration data mapping device
hint.ar71xx_caldata.0.at="nexus0"
hint.ar71xx_caldata.0.order=0

# Where the ART is - last 64k in the first 8MB of flash
hint.ar71xx_caldata.0.map.0.ath_fixup_addr=0x1fff0000
hint.ar71xx_caldata.0.map.0.ath_fixup_size=16384

# And now tell the ath(4) driver where to look!
hint.ath.0.eeprom_firmware="ar71xx_caldata.0.map.0.eeprom_firmware"

Tested:

* carambola2, AR933x SoC, using a set of ath and ath_hal modules to load

TODO:

* unify this bit of firmware loading code, as I will definitely need
  to include both the PCI bus firmware version (for PCI ID fixups too!)
  as well as AHB/on-chip calibration data.

* Commit the ath_ahb bus code

* Convert .. everything over.  That'll take the majority of the time.
2017-05-23 06:20:06 +00:00
Adrian Chadd
9f329febcb [ar71xx] fix up dump space a la what jhb@ did elsewhere a while ago. 2017-05-21 23:55:58 +00:00
Adrian Chadd
7e2f67b973 [ar934x] do an ethernet analog reset; apparently some boards don't.
Tested:

* on IOData WN-G300R. may be same as Sitecom WLR-2100.

Submitted by:	Hiroki Mori <yamori813@yahoo.co.jp>
Differential Revision:	https://reviews.freebsd.org/D10621
2017-05-06 06:09:50 +00:00
Adrian Chadd
a10430e0a3 [ar531x] [if_are] Fix if_are behaviour under high load traffic
* use ifqmaxlen
* handle (inefficiently for now) meeting padding and alignment requirements for
  transmit mbufs.
* change how TX ring handling is done

Submitted by:	Hiroki Mori <yamori813@yahoo.co.jp>
Differential Revision:	https://reviews.freebsd.org/D10557
2017-05-06 06:06:11 +00:00
Michael Zhilin
cb99e844b4 [etherswitch] simplify kernconf for recently added etherswitch drivers
This simple patch adds e6060sw, adm6996fc and ksz8995ma into conf/files.

Submitted by:	Hiroki Mori <yamori813@yahoo.co.jp>
Reviewed by:	adrian, mizhka
MFC after:	1 week
Differential Revision:	https://reviews.freebsd.org/D9255
2017-03-27 19:26:09 +00:00
Ruslan Bukin
c214a270f5 Allow setting access-width for UART registers.
This is required for FDT's standard "reg-io-width" property
(similar to "reg-shift" property) found in many DTS files.

This fixes operation on Altera Arria 10 SOC Development Kit,
where standard ns8250 uart allows 4-byte access only.

Reviewed by:	kan, marcel
Sponsored by:	DARPA, AFRL
Differential Revision:	https://reviews.freebsd.org/D9785
2017-02-27 20:08:42 +00:00
Warner Losh
28586889c2 Convert PCIe Hot Plug to using pci_request_feature
Convert PCIe hot plug support over to asking the firmware, if any, for
permission to use the HotPlug hardware. Implement pci_request_feature
for ACPI. All other host pci connections to allowing all valid feature
requests.

Sponsored by: Netflix
2017-02-25 06:11:59 +00:00
Pedro F. Giffuni
e099b90b80 sys: Replace zero with NULL for pointers.
Found with:	devel/coccinelle
MFC after:	3 weeks
Differential Revision:	https://reviews.freebsd.org/D9694
2017-02-22 02:35:59 +00:00
Adrian Chadd
a8d1e02f85 [ar71xx] add EARLY_PRINTF support for the rest of the non-AR933x SoCs.
Tested:

* AR934x SoC
2017-01-15 06:35:00 +00:00
Adrian Chadd
0013dd123f [ar71xx] add EARLY_PRINTF support for the AR933x (Hornet) UART.
Tested:

* Carambola 2
2016-12-29 17:31:38 +00:00
Adrian Chadd
ccfb1ab87c [ar71xx] put in an implicit read-after-write to flush things out.
Note: I may need to revisit this for mips74k.
2016-12-29 17:31:07 +00:00
Emmanuel Vadot
7073d12c4d ofw_spi: Parse property for the SPI mode and CS polarity.
As cs is stored in a uint32_t, use the last bit to store the
active high flag as it's unlikely that we will have that much CS.

Reviewed by:	loos
MFC after:	2 weeks
Differential Revision:	https://reviews.freebsd.org/D8614
2016-12-18 14:54:20 +00:00
Michael Zhilin
167a228d79 [spi] reformat message and ar5315_spi minor fix
This commit corrects print of nomatch (newline was too early) and fix
unit number for new child in ar5315_spi (was 0, now is -1 to calculate it
according to actual system state)

Submitted by:	Hiroki Mori <yamori813@yahoo.co.jp>
Reviewed by:	ray, loos, mizhka
MFC after:	2 weeks
Differential Revision:	https://reviews.freebsd.org/D8749
2016-12-13 09:53:43 +00:00
Emmanuel Vadot
adff859ba2 Use the spibus accessor when applicable.
MFC after:	3 days
2016-12-12 20:04:31 +00:00
Ruslan Bukin
91f70e00c4 Move intrng includes to the main MIPS includes file.
Sponsored by:	DARPA, AFRL
2016-11-19 17:01:06 +00:00
Michael Zhilin
34cd8ebdcf [mips/ar531x] code cleanup, non-INTRNG support
This commit improves code styles like:
 - removing commented code
 - format comments as C-style
 - add spaces after #define-s

It also bring ability to build kernel without INTRNG and remove RedBoot dependency.

Tested on FON2201

Submitted by:	Hiroki Sato <yamori813@yahoo.co.jp>
Reviewed by:	adrian, mizhka
Approved by:	adrian(mentor)
Differential Revision:	https://reviews.freebsd.org/D8557
2016-11-18 14:06:29 +00:00
Hans Petter Selasky
d3bf5efc1f Fix device delete child function.
When detaching device trees parent devices must be detached prior to
detaching its children. This is because parent devices can have
pointers to the child devices in their softcs which are not
invalidated by device_delete_child(). This can cause use after free
issues and panic().

Device drivers implementing trees, must ensure its detach function
detaches or deletes all its children before returning.

While at it remove now redundant device_detach() calls before
device_delete_child() and device_delete_children(), mostly in
the USB controller drivers.

Tested by:		Jan Henrik Sylvester <me@janh.de>
Reviewed by:		jhb
Differential Revision:	https://reviews.freebsd.org/D8070
MFC after:		2 weeks
2016-10-17 10:20:38 +00:00
Adrian Chadd
7c12b677f5 [ar531x] add initial port for the AR231x/531x series of SoCs.
These are older MIPS4kc parts from Atheros.  They typically ran at
sub-200MHz and have 11bg, 11a, or 11abg wifi MAC/PHYs integrated.

This port is the initial non-wifi pieces required to bring up the
chip.  I'll commit the redboot and other pieces later, and then
hopefully(!) wifi support will follow.

Submitted by:   Mori Hiroki <yamori813@yahoo.co.jp>
Differential Revision:  https://reviews.freebsd.org/D7237
2016-10-04 16:27:36 +00:00
Adrian Chadd
ab9df3af7f [arge] add some extra MDIO debugging support
* add an ANY debug level which will always echo the message if debugging
  is compiled in;
* log MDIO transaction timeouts if debugging is compiled in;
* the argemdio device is different to arge, so turning on MDIO debugging
  flags in arge->sc_debug doesn't help.  Add a debug sysctl to argemdio
  as well so that MDIO transactions can be debugged.

Tested:

* AR9331
2016-08-05 17:16:35 +00:00
Adrian Chadd
accdd12e71 [ar71xx_gpio] handle AR934x and QCA953x GPIO OE polarity.
For reasons I won't comment on, the AR934x and QCA953x GPIO_OE register
value is inverted - bit set == input, bit clear == output.

So, fix this in the output setting, in reading the initial state from
the boot loader, and also setting any gpiofunc pins that are necessary.
2016-07-31 06:51:34 +00:00
Landon J. Fuller
ff29b85a34 Replace mips/sentry5 with mips/broadcom
The delta between SENTRY5 and BCM was already small due to BCM being
derived from SENTRY5; re-integrating the two avoids the maintenance
overhead of keeping them both in sync with bhnd(4) changes.


- Re-integrate minor SENTRY5 deltas in bcm_machdep.c
- Modify uart_cpu_chipc to allow specifying UART debug/console flags via
  kenv and device hints.
- Switch SENTRY5 to std.broadcom
- Enabled CFI flash support for SENTRY5

Reviewed by:	Michael Zhilin <mizkha@gmail.com> (Broadcom MIPS support)
Approved by:	re (gjb), adrian (mentor)
Differential Revision:	https://reviews.freebsd.org/D6897
2016-06-25 04:34:54 +00:00
Edward Tomasz Napierala
300be80084 Remove NULL checks after M_WAITOK allocations from sys/mips/.
Reviewed by:	adrian@
MFC after:	1 month
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D6301
2016-05-11 09:42:24 +00:00
Pedro F. Giffuni
4ed3c0e713 sys: Make use of our rounddown() macro when sys/param.h is available.
No functional change.
2016-04-30 14:41:18 +00:00
Pedro F. Giffuni
7b6cea2b01 mips: for pointers replace 0 with NULL.
These are mostly cosmetical, no functional change.

Found with devel/coccinelle.

Reviewed by:	adrian
2016-04-15 14:26:24 +00:00
Justin Hibbits
f8fd3fb518 Fix the resource_list_print_type() calls to use uintmax_t.
Missed a bunch from r297000.
2016-03-22 22:25:08 +00:00
Justin Hibbits
da1b038af9 Use uintmax_t (typedef'd to rman_res_t type) for rman ranges.
On some architectures, u_long isn't large enough for resource definitions.
Particularly, powerpc and arm allow 36-bit (or larger) physical addresses, but
type `long' is only 32-bit.  This extends rman's resources to uintmax_t.  With
this change, any resource can feasibly be placed anywhere in physical memory
(within the constraints of the driver).

Why uintmax_t and not something machine dependent, or uint64_t?  Though it's
possible for uintmax_t to grow, it's highly unlikely it will become 128-bit on
32-bit architectures.  64-bit architectures should have plenty of RAM to absorb
the increase on resource sizes if and when this occurs, and the number of
resources on memory-constrained systems should be sufficiently small as to not
pose a drastic overhead.  That being said, uintmax_t was chosen for source
clarity.  If it's specified as uint64_t, all printf()-like calls would either
need casts to uintmax_t, or be littered with PRI*64 macros.  Casts to uintmax_t
aren't horrible, but it would also bake into the API for
resource_list_print_type() either a hidden assumption that entries get cast to
uintmax_t for printing, or these calls would need the PRI*64 macros.  Since
source code is meant to be read more often than written, I chose the clearest
path of simply using uintmax_t.

Tested on a PowerPC p5020-based board, which places all device resources in
0xfxxxxxxxx, and has 8GB RAM.
Regression tested on qemu-system-i386
Regression tested on qemu-system-mips (malta profile)

Tested PAE and devinfo on virtualbox (live CD)

Special thanks to bz for his testing on ARM.

Reviewed By: bz, jhb (previous)
Relnotes:	Yes
Sponsored by:	Alex Perez/Inertial Computing
Differential Revision: https://reviews.freebsd.org/D4544
2016-03-18 01:28:41 +00:00
Svatopluk Kraus
a1e1814d76 As <machine/pmap.h> is included from <vm/pmap.h>, there is no need to
include it explicitly when <vm/pmap.h> is already included.

Reviewed by:	alc, kib
Differential Revision:	https://reviews.freebsd.org/D5373
2016-02-22 09:02:20 +00:00
Justin Hibbits
7915adb560 Introduce a RMAN_IS_DEFAULT_RANGE() macro, and use it.
This simplifies checking for default resource range for bus_alloc_resource(),
and improves readability.

This is part of, and related to, the migration of rman_res_t from u_long to
uintmax_t.

Discussed with:	jhb
Suggested by:	marcel
2016-02-20 01:32:58 +00:00
Michal Meloun
cdf4ec6873 EHCI: Make core reset and port speed reading more generic.
Use driver settable callbacks for handling of:
- core post reset
- reading actual port speed

Typically, OTG enabled EHCI cores wants setting of USBMODE register,
but this register is not defined in EHCI specification and different
cores can have it on different offset.

Also, for cores with TT extension, actual port speed must be determinable.
But again, EHCI specification not covers this so this patch provides
function for two most common variant of speed bits layout.

Reviewed by: hselasky
Differential Revision: https://reviews.freebsd.org/D5088
2016-01-28 14:11:59 +00:00
Justin Hibbits
2dd1bdf183 Convert rman to use rman_res_t instead of u_long
Summary:
Migrate to using the semi-opaque type rman_res_t to specify rman resources.  For
now, this is still compatible with u_long.

This is step one in migrating rman to use uintmax_t for resources instead of
u_long.

Going forward, this could feasibly be used to specify architecture-specific
definitions of resource ranges, rather than baking a specific integer type into
the API.

This change has been broken out to facilitate MFC'ing drivers back to 10 without
breaking ABI.

Reviewed By: jhb
Sponsored by:	Alex Perez/Inertial Computing
Differential Revision: https://reviews.freebsd.org/D5075
2016-01-27 02:23:54 +00:00
Adrian Chadd
50bf167022 Fix missing path conversion from the previous commit to shuffle mdio around.
It turns out the recent work to cut down the number of atheros kernels built
didnt include one with ARGE_MDIO defined..
2015-12-27 07:39:44 +00:00
Adrian Chadd
191f543e29 [qca953x] remove unneeded initialisation.
This was copied from another chip file and it's not required on Honeybee.

Tested:

* AP143, QCA9531 SoC.

Obtained from: OpenWRT
2015-12-15 04:45:00 +00:00
Adrian Chadd
2365b69ef7 [ar71xx] always count interrupts, spurious or otherwise.
This aids in debugging.
2015-12-15 04:44:06 +00:00
Adrian Chadd
ae3f04a5df [arge] add a comment about needing mdio busses in order to use the interface.
This is a holdover from how reset is handled in the ARGE_MDIO world.
You need to define the mdio bus device if you want to use the ethernet
device or the arge setup path doesn't bring the MAC out of reset.
2015-12-15 04:43:28 +00:00