Commit Graph

207 Commits

Author SHA1 Message Date
David E. O'Brien
6b4b73920f Add a real dependency on the microcode.
Now when one does 'make kernel ; make kernel' the second invocation
only does:  `kernel.ko' is up to date.
rather than reproduce all the binary microcode files and relink the kernel.
[continuation of r212429]
2011-02-25 09:07:17 +00:00
Olivier Houchard
3e9a516ed4 Get myself a brain, move the call to init_param1() before the first use in
at91_machdep.c, and do it for the files I forgot the first time

Reported by:	andrew
Submitted by:	pluknet
2011-02-21 13:11:05 +00:00
Rebecca Cran
6bccea7c2b Fix typos - remove duplicate "the".
PR:	bin/154928
Submitted by:	Eitan Adler <lists at eitanadler.com>
MFC after: 	3 days
2011-02-21 09:01:34 +00:00
Olivier Houchard
e9e1639ac0 Call init_param1() much earlier, so that msgbufsize is non-zero when we want
to map and use the msgbuf.
2011-02-13 20:02:46 +00:00
Sergey Kandaurov
4053b05b91 Make MSGBUF_SIZE kernel option a loader tunable kern.msgbufsize.
Submitted by:	perryh pluto.rain.com (previous version)
Reviewed by:	jhb
Approved by:	kib (mentor)
Tested by:	universe
2011-01-21 10:26:26 +00:00
Warner Losh
72497ecf7e IXP4XX_GPIO_{,UN}LOCK() don't take args. Remove the sc here to make
this compile again.
2010-12-23 19:28:50 +00:00
Andrew Thompson
a0ba8fd51c Provide a mutex around the read/modify/write of the IXP425_GPIO_*
registers. Giant was used in some places, but not all.
2010-11-14 20:41:22 +00:00
Andrew Thompson
54873b4cd6 Add a GPIO driver for the Gateworks Cambria platform.
The external gpio pins are connected to a PLD on the i2c bus, unfortunatley
this device does not conform by failing to send an ack after each byte written.
The iicbb driver will abort the transfer when the address is not ack'd and it
would introduce a lot of churn to be able to pass a flag down to
iicbb_start/iicbb_write. Instead we do bad things by grabbing the iicbus but
then doing our own bit banging.
2010-11-11 20:18:33 +00:00
Rebecca Cran
b1ce21c6ef Fix typos.
PR:	bin/148894
Submitted by:	olgeni
2010-11-09 10:59:09 +00:00
Andrew Thompson
0b773cbb23 Remove line for the uncommitted Cambria gpio drive that snuck in with r214946. 2010-11-07 20:38:14 +00:00
Andrew Thompson
cefd33c787 Hook up the five gpio pins on the Avila board to the gpio framework. There are
actually 16 I/O lines but the other ones are used for system devices and
interrupts.

The IXP4XX platform can set interrupts on these pins for
high/low/rising/falling/transitional but this is not implemented yet.

The Cambria has the same interface but as all the pins are assigned to system
functions the gpio header is toggled via a PLD on the i2c bus and is not
supported by this commit.
2010-11-07 20:33:39 +00:00
Marius Strobl
8e5d93dbb4 Convert the PHY drivers to honor the mii_flags passed down and convert
the NIC drivers as well as the PHY drivers to take advantage of the
mii_attach() introduced in r213878 to get rid of certain hacks. For
the most part these were:
- Artificially limiting miibus_{read,write}reg methods to certain PHY
  addresses; we now let mii_attach() only probe the PHY at the desired
  address(es) instead.
- PHY drivers setting MIIF_* flags based on the NIC driver they hang
  off from, partly even based on grabbing and using the softc of the
  parent; we now pass these flags down from the NIC to the PHY drivers
  via mii_attach(). This got us rid of all such hacks except those of
  brgphy() in combination with bce(4) and bge(4), which is way beyond
  what can be expressed with simple flags.

While at it, I took the opportunity to change the NIC drivers to pass
up the error returned by mii_attach() (previously by mii_phy_probe())
and unify the error message used in this case where and as appropriate
as mii_attach() actually can fail for a number of reasons, not just
because of no PHY(s) being present at the expected address(es).

Reviewed by:	jhb, yongari
2010-10-15 14:52:11 +00:00
Andriy Gapon
3d844eddb7 bus_add_child: change type of order parameter to u_int
This reflects actual type used to store and compare child device orders.
Change is mostly done via a Coccinelle (soon to be devel/coccinelle)
semantic patch.
Verified by LINT+modules kernel builds.

Followup to:	r212213
MFC after:	10 days
2010-09-10 11:19:03 +00:00
Maxim Sobolev
e50d35e6c6 Add new tunable 'net.link.ifqmaxlen' to set default send interface
queue length. The default value for this parameter is 50, which is
quite low for many of today's uses and the only way to modify this
parameter right now is to edit if_var.h file. Also add read-only
sysctl with the same name, so that it's possible to retrieve the
current value.

MFC after:	1 month
2010-05-03 07:32:50 +00:00
Rui Paulo
c0873717d4 Pass the correct pointer to fled_cb(). 2010-03-26 18:49:43 +00:00
Rui Paulo
4cd0801096 Fix previous commit: led_func() doesn't exist, it should be fled_cb().
Pointed out by:	bz
2010-02-22 14:49:52 +00:00
Rui Paulo
fb023b5a3c Turn on the front LED at boot time like we do with the Avila. 2010-02-10 11:40:18 +00:00
Rui Paulo
0ce207d2af Intel XScale hwpmc(4) support.
This brings hwpmc(4) support for 2nd and 3rd generation XScale cores.
Right now it's enabled by default to make sure we test this a bit.
When the time comes it can be disabled by default.
Tested on Gateworks boards.

A man page is coming.

Obtained from:	//depot/user/rpaulo/xscalepmc/...
2009-12-23 23:16:54 +00:00
Rui Paulo
bba017d6a0 Remove remaining bits of performance counter support.
Submitted by:	Tom Judge <tom at tomjudge.com>
2009-10-03 13:59:15 +00:00
Rui Paulo
f143a35bf1 Remove performance counter headers. This code came from NetBSD, but our
hardware perf. counter support is different, so we don't need these
files.

Reviewed by:	freebsd-arm (no comments)
2009-10-02 11:10:05 +00:00
Olivier Houchard
562c5c5bf0 No need to remove the same flag multiple times. 2009-08-23 19:54:36 +00:00
Robert Watson
eb956cd041 Use if_maddr_rlock()/if_maddr_runlock() rather than IF_ADDR_LOCK()/
IF_ADDR_UNLOCK() across network device drivers when accessing the
per-interface multicast address list, if_multiaddrs.  This will
allow us to change the locking strategy without affecting our driver
programming interface or binary interface.

For two wireless drivers, remove unnecessary locking, since they
don't actually access the multicast address list.

Approved by:	re (kib)
MFC after:	6 weeks
2009-06-26 11:45:06 +00:00
Jeff Roberson
50c202c592 Implement a facility for dynamic per-cpu variables.
- Modules and kernel code alike may use DPCPU_DEFINE(),
   DPCPU_GET(), DPCPU_SET(), etc. akin to the statically defined
   PCPU_*.  Requires only one extra instruction more than PCPU_* and is
   virtually the same as __thread for builtin and much faster for shared
   objects.  DPCPU variables can be initialized when defined.
 - Modules are supported by relocating the module's per-cpu linker set
   over space reserved in the kernel.  Modules may fail to load if there
   is insufficient space available.
 - Track space available for modules with a one-off extent allocator.
   Free may block for memory to allocate space for an extent.

Reviewed by:    jhb, rwatson, kan, sam, grehan, marius, marcel, stas
2009-06-23 22:42:39 +00:00
Sam Leffler
ea158edaa6 Now that we have UARTs running with fast interrupt handlers the ata
driver's i/o ops must be locked to avoid chaos.  Extend the cambria
bus tag to support ata and add a spin lock.  The ata driver is
hacked to use that instead of it's builtin hack for ixp425.  Once
the ata driver is fixed to not be confused about byte order we can
generalize the cambria bus tag code and make it generally useful.

While here take advantage of our being ixp435-specific to remove
delays when switching between byte+word accesses and to eliminate
the 2us delay for the uarts (the spin lock overhead looks to do
this for us).
2009-06-23 19:29:23 +00:00
Sam Leffler
dbdc502de6 use consistent style 2009-06-23 19:05:02 +00:00
Sam Leffler
982cb04f16 o add a bus space tag that forces a 2usec delay between r/w ops; this is
used for the optional GPS+RS485 uarts on the Gateworks Cambria boards
  which otherwise are unreliable
o setup the hack bus space tag for the GPS+RS485 uarts
o program the gpio interrupts for the uarts to be edge-rising
o force timing on the expansion bus for the uarts to be "slow"

Thanks to Chris Lang of Gateworks for these tips.
2009-06-22 22:54:13 +00:00
Sam Leffler
a34dbf45de o remove hack to write UUE+RTOIE in the uart's IER; force them with hints
o honor hints for the rclk
2009-06-22 22:46:37 +00:00
Sam Leffler
c1919f47a1 hook arm_post_filter to ACK GPIO interrupts; this fixes the interrupt
storm observed on the GPS+RS485 uarts on Gateworks Cambria boards

Reviewed by:	cognet
2009-06-22 20:57:51 +00:00
Sam Leffler
dbae7bff65 always define Cambria GPS+RS485 mappings as they are no longer conditional 2009-06-22 20:42:28 +00:00
Sam Leffler
55ca456dcd map the optional GPS and RS485 uart's on the Gateworks Cambria board
(may want to make these conditional)
2009-06-22 20:41:02 +00:00
Sam Leffler
a8c053089c add ixp425_set_gpio to program the gpio interrupt type 2009-06-22 20:38:55 +00:00
Sam Leffler
ad0be1f829 rewrite arm_get_next_irq to always make forward progress (should be optimized) 2009-06-22 20:36:22 +00:00
Sam Leffler
73c424b8cb kill stray whitespace 2009-06-22 20:34:50 +00:00
Sam Leffler
9b3a6692c8 move logic to ACK a GPIO to a separate function 2009-06-22 20:33:59 +00:00
Sam Leffler
a47a6c96f2 swap order in ddb show gpio printf 2009-06-22 20:31:06 +00:00
Sam Leffler
e311b18967 make type use consistent 2009-06-22 20:30:02 +00:00
Sam Leffler
1f5c3c70bd Add workaround to get IXP435 NPE-A working: reseting NPE-A after NPE-C
causes both to become inoperative; this apparently was done by the original
IAL code as a workaround for IMEM parity errors which we've not seen so
just disable the reset.

Note this problem does not occur on IXP425 boards. The linux driver does
fuse-resets on each NPE but in the order NPE-A < NPE-B < NPE-C (when probing
for which NPE's are present/operational); we may want to switch to a similar
scheme but for now disable the resets until we see an issue.
2009-06-17 17:57:52 +00:00
Sam Leffler
5d11bdc651 correct data/instruction memory sizes for non-ixp425 parts (these
are only used to bounds-check writes when loading firmware)
2009-06-17 03:09:13 +00:00
Sam Leffler
8f1fb99bf2 remove IAL vestige for defining the max data/instruction memory size;
instead of defining them according to ixp46x add new defines so we can
do this at run time
2009-06-17 02:55:53 +00:00
Sam Leffler
936f42e880 o correct default miibase for NPE-B and NPE-C; these values are
normally taken from the hints file so this should have no effect
o set the port address "just in case"
o add NPE-A support to the tx done qmgr callback
2009-06-17 02:53:05 +00:00
Sam Leffler
43596ff09d add ixp4xx_write_feature_bits 2009-06-17 02:51:16 +00:00
Warner Losh
b27c946750 devclass_find_free_unit(xxx, 0) is identical to -1 for most
applications (including this one).  Switch to it since the former is a
racy interface.
2009-06-12 00:07:09 +00:00
Andriy Gapon
08d43f8e62 strict kobj signatures: number of fixes for arm architecture
no functional changes should result

Reviewed by:	imp, current@
Approved by:	jhb (mentor)
2009-06-11 17:05:13 +00:00
Marcel Moolenaar
272489fe59 Pass the previously returned IRQ back to arm_get_next_irq() so that
the implementation can guarantee forward progress in the event of
a stuck interrupt or interrupt storm. This is especially critical
for fast interrupt handlers, as they can cause a hard hang in that
case. When first called, arm_get_next_irq() is passed -1.

Obtained from:	Juniper Networks, Inc.
2009-06-09 18:18:41 +00:00
Sam Leffler
06ecfb379a maintain existing style 2009-05-30 18:23:55 +00:00
Attilio Rao
1abcdbd127 When user_frac in the polling subsystem is low it is going to busy the
CPU for too long period than necessary.  Additively, interfaces are kept
polled (in the tick) even if no more packets are available.
In order to avoid such situations a new generic mechanism can be
implemented in proactive way, keeping track of the time spent on any
packet and fragmenting the time for any tick, stopping the processing
as soon as possible.

In order to implement such mechanism, the polling handler needs to
change, returning the number of packets processed.
While the intended logic is not part of this patch, the polling KPI is
broken by this commit, adding an int return value and the new flag
IFCAP_POLLING_NOCOUNT (which will signal that the return value is
meaningless for the installed handler and checking should be skipped).

Bump __FreeBSD_version in order to signal such situation.

Reviewed by:	emaste
Sponsored by:	Sandvine Incorporated
2009-05-30 15:14:44 +00:00
Andrew Thompson
11c63ede84 Delete the old USB stack. The new stack has settled in and has all the
drivers/functionality and then some.
2009-05-27 16:16:56 +00:00
Sam Leffler
e8138981f4 accumulate npe statistics and expose them through dev.npe.X.stats 2009-05-23 19:14:20 +00:00
Sam Leffler
0ad2baa062 add IXP4XX_FLASH_SIZE config knob that can be used to override the default
flash size; this is necessary at the moment because we map all of flash at
boot, eventually we'll do this on the fly
2009-03-10 21:49:22 +00:00
Sam Leffler
5f5fc09df0 map CS0 on 2358 so flash is accessible 2009-03-10 21:47:17 +00:00