LAN7800 USB 3.1 to 10/100/1000 Ethernet with PHY
LAN7801 USB 3.1 to 10/100/1000 Ethernet with RGMII interface
Also update manufacturer name for the Vendor ID. Microchip acquired
SMSC in May 2012.
Sponsored by: The FreeBSD Foundation
Previously gpart's man page listed some command options in prose, and
some in table form, which made it more difficult to use as a reference.
Reviewed by: bcr
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D15135
Alphabetical order, uppercase before lowercase for each letter and with
no regard to whether an option takes an argument.
Sponsored by: The FreeBSD Foundation
This aligns the section itself compared to other sections, does not change
internal alignment of fields stored inside. This may or may not come later.
The motivation is partially combating adverse effects of the adjacent cache
line prefetcher. Without the annotation part of read_mostly section was on
the line of fire.
- initialize the pcpu STAILQ in the NUMA case
- don't enqueue the callback task if there isn't sufficient work to be done
Reported by: pho@
Approved by: sbruno@
Current UMA internals are not suited for efficient operation in
multi-socket environments. In particular there is very common use of
MAXCPU arrays and other fields which are not always properly aligned and
are not local for target threads (apart from the first node of course).
Turns out the existing UMA_ALIGN macro can be used to mostly work around
the problem until the code get fixed. The current setting of 64 bytes
runs into trouble when adjacent cache line prefetcher gets to work.
An example 128-way benchmark doing a lot of malloc/frees has the following
instruction samples:
before:
kernel`lf_advlockasync+0x43b 32940
kernel`malloc+0xe5 42380
kernel`bzero+0x19 47798
kernel`spinlock_exit+0x26 60423
kernel`0xffffffff80 78238
0x0 136947
kernel`uma_zfree_arg+0x46 159594
kernel`uma_zalloc_arg+0x672 180556
kernel`uma_zfree_arg+0x2a 459923
kernel`uma_zalloc_arg+0x5ec 489910
after:
kernel`bzero+0xd 46115
kernel`lf_advlockasync+0x25f 46134
kernel`lf_advlockasync+0x38a 49078
kernel`fget_unlocked+0xd1 49942
kernel`lf_advlockasync+0x43b 55392
kernel`copyin+0x4a 56963
kernel`bzero+0x19 81983
kernel`spinlock_exit+0x26 91889
kernel`0xffffffff80 136357
0x0 239424
See the review for more details.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D15346
if_bridge has a lot of limitations that make it scale poorly to higher data
rates. In my projects/VPC branch I leverage the bridge interface between
layers for my high speed soft switch as well as for purposes of stacking
in general.
Reviewed by: sbruno@
Approved by: sbruno@
Differential Revision: https://reviews.freebsd.org/D15344
- Lend priority to preempted threads in epoch_wait to handle the case
in which we've had priority lent to us. Previously we borrowed the
priority of the lowest priority preempted thread. (pointed out by mjg@)
- Don't attempt allocate memory per-domain on powerpc, we don't currently
handle empty sockets (as is the case on jhibbits Talos' board).
- Handle deferred callbacks as pcpu lists and poll the lists periodically.
Currently the interval is 1/hz.
- Drop the thread lock when adaptive spinning. Holding the lock starves
other threads and can even lead to lockups.
- Keep a generation count pcpu so that we don't keep spining if a thread
has left and re-entered an epoch section.
- Actually removed the callback from the callback list so that we don't
double free. Sigh ...
Approved by: sbruno@
Make if_printf() use vlog() instead of vprintf(). This means it can no
longer return the number of characters printed, as it used to, but every
single call to if_printf() in the entire kernel ignores the return value
anyway; just return 0 so we don't have to change the prototype.
Consistently use if_printf() throughout sys/net/if.c, instead of a
mixture of if_printf() and log().
In ifa_maintain_loopback_route(), don't needlessly log an error if we
either failed to add a route because it already existed or failed to
remove one because it did not. We still return an error code, though.
MFC after: 1 week
While <sys/sysctl.h> includes <sys/queue.h> unconditionally, it is only
actually used in code which is conditional on _KERNEL. Make the #include
itself conditional as well, and fix userland code that uses <sys/queue.h>
for other purposes but relied on <sys/sysctl.h> to bring it in.
MFC after: 1 week
will include license metadata in the resultant GCE image.
GCE_LICENSE is unset by default, as it primarily pertains to images
produced by the FreeBSD Project, but for downstream FreeBSD consumers,
it can be set in the make(1) environment in the format of:
--licenses="projects/PROJECT_ID/global/licenses/LICENSE_NAME"
The "license" is not a license, per se, but required metadata that
is required by the GCE marketplace. For the FreeBSD Project, the
license name is simply 'freebsd', with the description of 'FreeBSD'.
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Even though we don't use it, it appears something else requires it to
be != 0 to work. This breaks tftp boot in loader.efi, so revert until
that can be sorted out.
As of r333461 we require ifunc support to link a working amd64 kernel.
The default in-tree bootstrap linker is lld and it has the required
support, as does any modern out-of-tree binutils linker. The in-tree
GNU ld is from binutils 2.17.50 and it does not have ifunc support,
so produce an error rather than a broken kernel.
Reviewed by: kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D15378
Read locking is over used in the kernel to guarantee liveness. This API makes
it easy to provide livenes guarantees without atomics.
Includes epoch_test kernel module to stress test the API.
Documentation will follow initial use case.
Test case and improvements to preemption handling in response to discussion
with mjg@
Reviewed by: imp@, shurd@
Approved by: sbruno@
- Remove unused or dead store variable
- Remove unused function ctl_copyin_alloc
- Add missing curly brackets, this seems a regression in r287720
Reviewed by: jhibbits
Differential Revision: https://reviews.freebsd.org/D15383
Before this change, the VGA palette was configured to match the shell
palette (e.g. color #1 was red). There was one glitch early in boot when
the vt(4)'s VGA palette was loaded: the loader's logo would switch from
red to blue. Likewise for the "Booting..." message switching from blue
to red. That's because the loader's logo was drawed with the default VGA
palette where a few colors are swapped compared to the shell palette
(e.g. blue <-> red).
This change configures the default VGA palette during initialization and
converts input's colors from shell to VGA palette index.
There should be no visible changes, except the loader's logo which will
keep its original color.
Reviewed by: eadler
This makes it more logical:
1. It checks the requested color format
2. It fills the palette accordingly
Also vt_palette_init() is only called when needed (i.e. when the format
is `COLOR_FORMAT_RGB`).
Use LIST_FOREACH_SAFE in in6m_disconnect() since we're
deleting and freeing item from the membership list
while traversing the list.
Reviewed by: mmacy
Sponsored by: Netflix
From now on, linking amd64 kernel requires either lld or newer ld.bfd.
Reviewed by: jhb (as part of the large patch)
Discussed with: emaste
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D13838
Change uint8_t type of opcode argument to int in the print_opcode()
function. Use negative value to print the rest of opcodes, because
zero value is O_NOP, and it can't be uses for this purpose.
Reported by: lev
MFC after: 1 week
Header length is optional hint for the ENA device. Because It is not
guaranteed that every packet header will be in the first mbuf
segment, it is better to skip passing any information. If the header
length will be indicating invalid value (different than 0), then the
packet will be dropped.
This kind situation can appear, when the UDP packet will be fragmented
by the stack in the ip_fragment() function.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Reported by: Krishna Yenduri <kyenduri@brkt.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
It is useful to enter kdb with an escape sequence.
While here move the USB_DEBUG with the others debug options and define
nooptions USB_DEBUG for GENERIC-NODEBUG
On AWS, a network interface can get reinitialized every 30 minutes due
to the MTU being (re)set when a new DHCP lease is obtained. This can
cause packet drop, along with annoying syslog messages.
Skip setting the MTU in the ena driver if the new MTU is the same as the
old MTU. Note this fix is already in the netfront driver.
Testing: Verified ena up/down messages do not appear every 30 min in
/var/log/messages with the fix in place.
Submitted by: Krishna Yenduri <kyenduri@brkt.com>
Reviewed by: Michal Krawczyk <mk@semihalf.com>
* Change ena-com BIT macro to work on unsigned value.
To make the shifting operations safer, they should be working on
unsigned values.
* Fix a mutex not owned ASSERT panic in ENA control path.
A thread calling cv_broadcast()/cv_signal() must hold the mutex used for
cv_wait(). Fix the ENA control path code that has this problem.
Submitted by: Krishna Yenduri <kyenduri@brkt.com>
Reviewed by: Michal Krawczyk <mk@semihalf.com>
Tested by: Michal Krawczyk <mk@semihalf.com>
* Change ena-com BIT macro to work on unsigned value.
To make the shifting operations safer, they should be working on
unsigned values.
* Fix a mutex not owned ASSERT panic in ENA control path.
A thread calling cv_broadcast()/cv_signal() must hold the mutex used for
cv_wait(). Fix the ENA control path code that has this problem.
Submitted by: Krishna Yenduri <kyenduri@brkt.com>
Reviewed by: Michal Krawczyk <mk@semihalf.com>
Tested by: Michal Krawczyk <mk@semihalf.com>
This had been the default behavior but was changed accidentally as part
of the recent iw_cxgbe+OFED overhaul. Fix another bug in that change
while here: the global knob affects all the adapters in the system and
should be left alone by per-adapter code.
MFC after: 3 days
Sponsored by: Chelsio Communications
Summary:
There were 2 issues that were preventing correct symbol resolution
on PowerPC/pseries:
1- memory corruption at chrp_attach() - this caused the inital
part of the symbol table to become zeroed, which would cause
the kernel linker to fail to parse it.
(this was probably zeroing out other memory parts as well)
2- DDB symbol resolution wasn't working because symtab contained
not relocated addresses but it was given relocated offsets.
Although relocating the symbol table fixed this, it broke the
linker, that already handled this case.
Thus, the fix for this consists in adding a new DDB macro:
DB_STOFFS(offs) that converts a (potentially) relocated offset
into one that can be compared with symbol table values.
PR: 227093
Submitted by: Leandro Lupori <leandro.lupori_gmail.com>
Differential Revision: https://reviews.freebsd.org/D15372
ioctl frontend ports.
This revision introduces two changes to CTL:
- Changes the way options are passed to CTL_LUN_REQ and CTL_PORT_REQ ioctls.
Removes ctl_be_arg structure and associated logic and replaces it with
nv(3)-based logic for passing in and out arguments.
- Allows creating multiple ioctl frontend ports using either ctladm(8) or
ctld(8).
New frontend ports are represented by /dev/cam/ctl<pp>.<vp> nodes, eg /dev/cam/ctl5.3.
Those device nodes respond only to CTL_IO ioctl.
New command-line options for ctladm:
# creates new ioctl frontend port with using free pp and vp=0
ctladm port -c
# creates new ioctl frontend port with pp=10 and vp=0
ctladm port -c -O pp=10
# creates new ioctl frontend port with pp=11 and vp=12
ctladm port -c -O pp=11 -O vp=12
# removes port with number 4 (it's a "targ_port" number, not pp number)
ctladm port -r -p 4
New syntax for ctl.conf:
target ... {
port ioctl/<pp>
...
}
target ... {
port ioctl/<pp>/<vp>
...
Note: Most of this work was made by jceel@, thank you.
Submitted by: jceel
Reworked by: myself
Reviewed by: mav (earlier versions and recently during the rework)
Obtained from: FreeNAS and TrueOS
Relnotes: Yes
Sponsored by: iXsystems Inc.
Differential Revision: https://reviews.freebsd.org/D9299
Rather than include a copy for memmove to call bcopy to call memcpy
(which handles overlapping copies), make memmove a strong reference to
memcpy to save the two calls.
Differential Revision: https://reviews.freebsd.org/D15374
riscv and powerpc have nearly identical bcopy.c that's
supposed to be mostly MI. Move it to the MI libkern.
Differential Revision: https://reviews.freebsd.org/D15374
request, which can be used to configure hardware NAT and swapmac.
All firmwares released after Jan 2017 support this work request.
Sponsored by: Chelsio Communications
If the 'n' flag is provided the provided key number will be used to
decrypt device. This can be used combined with dryrun to verify if the key
is set correctly. This can be also used to determine which key slot we want to
change on already attached device.
Reviewed by: allanjude
Differential Revision: https://reviews.freebsd.org/D15309
'n' is used in other commands to define the key index.
We should be consistent with that.
'C' option is used by patch(1) to perform dryrun so lets use that.
Reviewed by: allanjude
Differential Revision: https://reviews.freebsd.org/D15308
