As unicast filters are not chained, we should always try to insert the
specific filter for our MAC address, and then try to insert the unicast
mis-match filter if that fails or all unicast has been requested.
Submitted by: Mark Spender <mspender at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D6295
This caused signed/unsigned errors in some subsequent patches.
The only value passed to this is a uint32_t.
Submitted by: Mark Spender <mspender at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D6294
The licensing partition for V3 licensing will use the standard TLV format,
so Medford licensing operations on the staging buffer are implemented using
the TLV functions.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D6288
Add creation, deletion and checksumming operations to the private copy of
TLV functions in the common code. Functions added in preparation for V3
licensing support, as licensing keys are stored in the TLV format. Missing
support for multiple segment partitions added. Annotations for Windows code
analysis also updated.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D6264
Move TLV buffer validation into ef10-specific function and add accessor
function which also converts the partition ID to the internal
representation.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D6263
With the removal of Falcon support, this is now dead code.
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
This patch ensures that client code will fail to build
with Falcon support. Following patches remove Falcon
support code entirely.
sfxge(4) has never supported Falcon.
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Labels are limitted by 32 on EF10. It is not sufficient on powerful hosts.
Since only one RxQ is running over each EvQ, zero label may be used.
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
PR: 208267
Differential Revision: https://reviews.freebsd.org/D6121
The IOCTL is used by 'ifconfig -v' to show SFP+/QSFP+ information
including inventory information and dianostics (temperature, light
levels, voltage etc).
Reviewed by: gnn,melifaro
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D5240
New annotation coming into use in the common code. Support its use by
adding null macro definitions for non-Windows platforms.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
X-MFC with: r293901
Ensure that checksum flags and L3/L4 fields are ignored
if lower level errors are reported in the event.
Remove checks for CRC0_ERR (bad iSCSI header CRC) and
CRC1_ERR (bad iSCSI payload or FCoE/FCoIP CRC) as they
are not used by any existing code.
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4975
The dynamic config on Medford is stored using two partitions in flash, and at
any time one is the 'current' partition, used to provide the active config,
and the other 'backup' partition is used for writes. This means that there
are two potential partitions that can be used to service reads, and which is
required can depend on, for example, whether the read is to get the current
contents or to verify a write.
When the partition write lock is held, the default behaviour is to read from
the backup partition, which was wrong for most reads in the common code which
require the current partition. This change allows the current partition to be
read whilst the write lock is held.
There is one read in Manftest which needs the backup partition.
ef10_nvram_partn_read_mode() is created to avoid changing
ef10_nvram_partn_read() which shares a prototype with the equivalent Falcon
and Siena methods.
MC_CMD_NVRAM_READ_IN_V2 adds an extra field, but firmware which doesn't support
it just ignores it.
Submitted by: Mark Spender <mspender at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4974
tlv_partition_header has field *preset* to support RFID-selectable
segments of dynamic configuration
Submitted by: Mateusz Wrzesinski <mwrzesinski at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
This allows an MTU change to be requested on unpriviliged functions
without also setting all the other parameters supported by MC_CMD_SET_MAC.
The enhanced SET_MAC command was introduced in v4_7 firmware.
Submitted by: Mark Spender <mspender at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4958
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4961
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4957
Leaving BIST methods for now as, though the Medford bootrom now has lots
of BIST support, production firmware doesn't appear to have been updated
yet.
Submitted by: Mark Spender <mspender at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4949
Not per PF copies as on Huntington.
Submitted by: Mark Spender <mspender at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4935
The "mcdi_err_arg" probe still reports results of failed MCDI
commands, unless the caller invoked efx_mcdi_execute_quiet().
Submitted by: Andy Moreton <amoreton at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4919
Add support for Huntington MCDI licensing interface to common code.
Ported from Linux net driver IOCTL functions with restructuring for
initial support for V3 licensing API.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4918
Fix an explanatory comment which did not explain very well.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4916
Fix efx_vpd_hunk_next() which has -- since its inception -- failed to
correctly iterate over the tags and keywords contained in the VPD data.
Only the first tag or keyword would be returned and the next call with
*contp == 1 would walk to the end of the data and finish.
This was spotted when fixing up errors spotted by Prefast code analysis
(which neglected to set all of the out parameters in all successful cases)
Also fix efx_vpd_verify() on Siena and EF10 which (as a side effect of
correctly iterating over all the tags and keywords) was failing as it
detected that both the static VPD and dynamic VPD storage contained an
RV keyword in the VPD-R tag. This is intentional as the static VPD and
dynamic VPD are stored separately (firmware merges their contents and
computes a new RV keyword checksum for the data readable from the VPD
capability in PCIe configuration space).
Submitted by: Andrew Lee <alee at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4915
The only value which has changed is the number of rows
(ER_DZ_EVQ_TMR_REG_ROWS is 2048 vs 1024 for FR_BZ_TIMER_COMMAND_REGP0_ROWS)
but that isn't used, so this shouldn't change behaviour.
Submitted by: Mark Spender <mspender at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4913
Pulled firmware_ids.h from firmwaresrc and applied genfwdef script.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4897
The EFSYS_OPT_RX_HDR_SPLIT optional feature in the common code
implemented the Lookahead Split feature of Windows. This split
received packets at a preconfigured byte offset, and delivered
the header and payload portions to separate receive queues.
Now the common code interface has no callers, so remove it.
Note that this should not be confused with the Header Data Split
feature of Windows, which splits packets at a header boundary.
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4888
Submitted by: Mark Spender <mspender at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4880
Prior to Medford, option ROM config was stored with one partition
per network port. Medford stores option ROM config in a single
partition (as an array of configurations, one per PF).
Update the EFXname /port to MCDI partition mapping for this.
Submitted by: Andy Moreton <amoreton at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4885
Make error messages consistent, and remove redundant checks.
Submitted by: Andy Moreton <amoreton at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4884
This API has been replaced by efx_mac_multicast_list_set()
and has no callers.
Submitted by: Andy Moreton <amoreton at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4883
New filters types may be added, but the same machinery should be able to
handle them.
Submitted by: Mark Spender <mspender at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4881
These bigs are changed on Medford.
Submitted by: Mark Spender <mspender at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4876
The pktfilter module has been obsolete for some time, as
it was replaced by newer features in filter module. With
the removal of the storport driver, this module has no
users and can be removed.
Submitted by: Andy Moreton <amoreton at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4875
Some new partitions have been added, but they shouldn't need to be
handled any differently.
Submitted by: Mark Spender <mspender at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4873
Rename all except hunt_tx_qdesc_tso_create(), which creates a
fw-assisted TSO v1 descriptor which isn't supported on Medford.
Submitted by: Mark Spender <mspender at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4870
All of these apply to both Huntington and Medford.
Submitted by: Mark Spender <mspender at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4868
This should allow these functions to work for Medford as well.
Submitted by: Mark Spender <mspender at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4866
All these fields will be used in shared ef10 code, so put them in an
ef10 member of a per-architecture union, rather that in the per-chip
union.
Submitted by: Mark Spender <mspender at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4865
Creating some files together to do the build system changes in one go.
Submitted by: Mark Spender <mspender at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4859
It is a part of MCDI rework to share more code among NIC families.
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D4481
To reduce code duplication in common code, consolidate similar privilege
check functions.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4480
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4455
Update of common code to provide a query on the MAC_SPOOFING_TX and
CHANGE_MAC privileges instead of the deprecated MAC_SPOOFING privilege.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4436
TLV routines use 'uint8_t *', NVRAM code uses caddr_t. Just cast to
required type to fix the warning.
Required to build with -Werror=pointer-signg.
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4391
The header is not present on FreeBSD, but exists on OmniOS where sfxge
common code is used as well.
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4390
It is better do not mix TxQ creation and receive event flags since only
checksum flags are applicable to TxQ.
Also it will allow to add a new TxQ creation specific flags.
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4389
When writing the MUM firmware the chunk size must be equal to the erase
size.
Submitted by: Laurence Evans <levans at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4388
Use flag on vadapter alloc when reported as a supported capability.
Use the slow device reset only when the capability is missing.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4387
The erase size is reported by the nvram info command.
Submitted by: Paul Fox <pfox at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4386
Required to build with -Werror=unused-but-set-variable.
Keep it under #if 0 as a reminder for parse error processing.
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
The SFL9122 "Huntington" controller was never built.
Submitted by: Mark Spender <mspender at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Submitted by: Artem V. Andreev <Artem.Andreev at oktetlabs.ru>
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4355
If, for example, a VF is configured to use a 1500 byte MTU, but the port
it is attached to is set to 9000 bytes, overlength frames can be received
by the VF. As Huntington scatters by default, these overlength packets
would be scattered across several descriptors, with all except the last
having the CONT bit set.
To avoid this, disable scatter when creating RXQs if the firmware
supports doing so, which all recent versions do. Then we only get
a single descriptor from an overlength frame. This will have the CONT
bit set to indicate it was truncated, so we can discard it.
Submitted by: Mark Spender <mspender at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4354
Submitted by: Paul Fox <pfox at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4353
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4331
After an MC reboot, a VF driver may reset before the PF driver has
finished bringing everything back up. This includes the VFs EVB port.
MC_CMD_VADAPTOR_ALLOC is the first MCDI call after an MC reboot to
require the EVB port, so if it fails with MC_CMD_ERR_NO_EVB_PORT,
retry the command a few times after waiting a while.
Submitted by: Mark Spender <mspender at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4333
Make link control privilege visible to OS driver to guard updates to
flow control and PHY advertised capabilities.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4330
It allows manftest to program them.
Submitted by: Paul Fox <pfox at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4329
Submitted by: Mark Spender <mspender at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4328
Common code should infer other privileges from Admin privilege to
support firmware that pre-dates introduction of specific privilege
flags.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4327
Submitted by: Artem V. Andreev <Artem.Andreev at oktetlabs.ru>
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4308
It is really observed in the case of VLAN over sfxge interface.
Also this change makes total value equal to 35 which is default assumed
by the kernel for if_hw_tsomaxsegcount.
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4319
Using a typedef for common code return types (rather than "int")
allows the Prefast static analyser to understand when a function
has been successful (and thus when its postconditions must hold).
This greatly reduces then number of false positives reported by
prefast for error paths in common code functions.
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Dynamic config partitions on boards that support RFID are divided into
a number of segments, each formatted like a partition, with header,
trailer and end tags. The first segment is the current active
configuration.
The segments are initialised by manftest and each contain a different
configuration e.g. firmware variant. The firmware can be instructed
via RFID to copy a segment over the first segment, hence changing the
active configuration. This allows ops to change the configuration of
a board prior to shipment using RFID.
Changes to the dynamic config may need to be written to all segments (in
particular firmware versions written by manftest) or just the first
segment (changes to the active configuration). See SF-111324-SW.
If only the first segment is written the code still needs to be aware of
the possible presence of subsequent segments as writing to a segment may
cause its size to increase, which would overwrite the subsequent
segments and invalidate them.
Boards that do not support RFID will only have one segment in their
dynamic config partition.
Submitted by: Paul Fox <pfox at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4302
If the VPD is corrupt and contains an 'RV' keyword before the
END tag, then this function could return without setting the
return code to report the error.
Found by prefast.
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Keep prefast happy by returning the initial queue index
from falconsiena_tx_qcreate(). No change in behaviour, as
etxo_qcreate already zeros *addedp before the call.
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
PIO is not yet supported in the FreeBSD driver.
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Adjust external port mapping table to distinguish Pavia from Monza.
Now the presence of any 40G mode implies at least 2 outputs per
external port. So Pavia 4x10G ports are now mapped to 1,2,3,4;
Monza 4x10G ports map to 1,1,2,2 as before.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
GCC 4.2.1 used on FreeBSD 8 and 9 branches does not like unnamed
union member in the structure. It is not strictly required in head,
but nice to have to minimize difference with out-of-tree driver.
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Driver must be able to start against older firmware that is missing
recently added MCDI calls, otherwise firmware upgrade will not be
possible.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D3145
The patch allows to run on unprivileged PF (PFIOV) passed to
a virtual machine.
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D2891
DEBUG_FLAGS are set to DEBUG option value when kernel is built.
For example, it is -g in GENERIC config to have debug symbols.
Also DEBUG_FLAGS are used to determine if ctfconvert should keep
debug symbols.
Since we redefined DEBUG_FLAGS, debug symbols were always missing.
ctfconvert complains about it during kernel build.
It is incorrect to append DEBUG_FLAGS, since if DEBUG has no -g (or
similar), we'll have no debug symbols and ctfconvert will complain.
If it incorrect to always have -g in our DEBUG_FLAGS, since debug
symbols presence should be controllable by kernel config.
So, just add disabled by default addition of -DDEBUG=1 to CFLAGS.
Reviewed by: imp
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D2666
Support 7xxx adapters including firmware-assisted TSO and VLAN tagging:
- Solarflare Flareon Ultra 7000 series 10/40G adapters:
- Solarflare SFN7042Q QSFP+ Server Adapter
- Solarflare SFN7142Q QSFP+ Server Adapter
- Solarflare Flareon Ultra 7000 series 10G adapters:
- Solarflare SFN7022F SFP+ Server Adapter
- Solarflare SFN7122F SFP+ Server Adapter
- Solarflare SFN7322F Precision Time Synchronization Server Adapter
- Solarflare Flareon 7000 series 10G adapters:
- Solarflare SFN7002F SFP+ Server Adapter
Support utilities to configure adapters and update firmware.
The work is done by Solarflare developers
(Andy Moreton, Andrew Lee and many others),
Artem V. Andreev <Artem.Andreev at oktetlabs.ru> and me.
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 weeks
Causually read by: gnn
Differential Revision: https://reviews.freebsd.org/D2618
years for head. However, it is continuously misused as the mpsafe argument
for callout_init(9). Deprecate the flag and clean up callout_init() calls
to make them more consistent.
Differential Revision: https://reviews.freebsd.org/D2613
Reviewed by: jhb
MFC after: 2 weeks
Kernel under stress load, mixed MC reboot and sfupdate really
generates TSO packet with RST flag.
It will generate many TCP packets with RST flag set.
May be RST flag should be set in the last segment only, but it could be
dropped. So, it is safer to keep the flag in all packets to be sure that
connection is reset.
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D2609
Also return error if TSO is requested without Tx checksum offload.
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D2564
It just affects capabilities of the created VLAN interface.
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D2563
If TxQ lock is obtained, deferred packet list shold be serviced even if
the packet addition fails because of overflow.
Without the patch freeze happens if:
- queue is not blocked (i.e. completion does not trigger unblock and service)
- put-list overflow (1024 entries)
- sfxge_tx_packet_add() acquires TxQ lock just as it is released it in
sfxge_tx_qdpl_service() on the second CPU but before pending check
- sfxge_tx_packet_add() swizzles put-list to get-list, fails because of
non-tcp get-list overflow and returns without packet list service
- sfxge_tx_qdpl_service() on the second CPU checks that there are no
pending packets in the put-list and returns
Other possible solution is to guaranee that maximum length of the put-list
is less than maximum length of any get-list.
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D2562
The driver uses ifm_data to save capabilities mask calculated during
initialization when supported phy modes are discovered.
The patch simply calculates it when either media or options are changed.
Reviewed by: glebius
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D2540
It is required for the next patch which adds dependency of TSO
capabilities from Tx checksum offloads.
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D2553
It is a preparation to the next patch which will service packet queue even
if packet addtion fails.
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D2552
Now each branch has one and only one possible TxQ lock state.
It simplifies understanding of the code.
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D2551
We can't disable it in HW, but we can ignore result.
Discard Rx descriptor checksum flags if Rx checksum offload is off.
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D2544
It simplifies understanding of the sfxge_tx_packet_add() logic and
avoids passing of 'locked' to called function.
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D2547
It is simply not required since the kernel checks corresponding
IFCAP_TSOx capability and CSUM_TSO in hw-assisted offloads.
Note that CSUM_TSO is two bits (CSUM_IP_TSO|CSUM_IP6_TSO) and both bits
are set in IPv4 and IPv6 mbufs.
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D2546
Also it is cheaper to check Rx descriptor flags than TCP protocol in IP
header.
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D2542
