Commit Graph

213165 Commits

Author SHA1 Message Date
Edward Tomasz Napierala
4e5408f10c Report negotiated MaxBurstLength and FirstBurstLength in "iscsictl -v"
and "ctladm islist -v" outputs.

MFC after:	1 month
2016-06-05 08:48:37 +00:00
Adrian Chadd
14b258b806 [bwn] Add missing firmware release calls.
This trips me up whenever I'm fooling around with partially supported
NICs that fail to fully attach or initialise - the firmware gets loaded
and references, but something fails - and the firmware references
aren't cleaned up.
2016-06-05 07:56:28 +00:00
Adrian Chadd
4bfbed7264 [bwn] Enable PHY-LP 5GHz support for the one NIC I have tested it on so far.
After perusing the PHY-LP code (don't ask why; honest) I discovered that
it /has/ 5GHz support - but it's not ever used.  I found one NIC - a
BCM4312 w/ pci id 0x4315 - which advertised dual-band PHY-LP support.

Turns out it works.

Whilst here, move up the support bit logging code so I can use it
to debug this.

Tested:

* BCM4312 (pci id 0x4315); 5GHz STA operation
2016-06-05 07:55:21 +00:00
Adrian Chadd
59f341f8bc [bwn] complain usefully if a PHY-N PHY is detected with no support is compiled in.
Log something other than "error 6" if the attach fails because the
GPL PHY-N code isn't included.
2016-06-05 07:51:36 +00:00
Andrew Rybchenko
995a3bf49c sfxge(4): allow firmware to auto-configure event queues on Medford
On Medford, licenses are required to enable RX and event cut through and to
disable RX batching. To avoid the need for the driver to make decisions based on
the licensing state, the MC_CMD_INIT_EVQ has been extended to allow us to leave
the decision to the firmware. If the adapter is licensed for low-latency use,
the firmware will choose the optimal settings for latency, otherwise it will use
the best settings for throughput.

For Huntington we still need to choose the settings ourselves.

Submitted by:   Mark Spender <mspender at solarflare.com>
Sponsored by:   Solarflare Communications, Inc.
MFC after:      1 week
Differential Revision:  https://reviews.freebsd.org/D6717
2016-06-05 06:37:54 +00:00
Adrian Chadd
09ff344bba [ath_hal] add AR9462 (jupiter) RX gain / XLNA programming.
This seems to make 5G work better.

It doesn't fix powersave handling though, that still sees the PHY get
stuck during initial calibration and everything goes pear shaped.
I'll look into that later.

Tested:

* QCAFN222 NIC, STA mode, 5GHz

Obtained from:	Linux ath9k
2016-06-05 05:55:27 +00:00
Adrian Chadd
fa63ec5349 [ath_hal] Add Jupiter 2.1 (AR9462 mac 640.3) support.
Turns out I wasn't even initialising or programming a lot of stuff
for the AR9462 2.1 chip.  Oops.

This mostly gets it working. powersave scan results in some pretty
hilarious NFcal hangs and I don't see beacons reliably.
There are still some xlna gain tables missing that ath9k has; I'll
follow up with some fixes and then see if the QCAFN222 NIC I have
tests this path.

Tested:

* QCAFN222 NIC, STA mode, 2GHz and 5GHz
2016-06-05 02:17:51 +00:00
Adrian Chadd
615a867ff2 [ath_hal] teach the reset path(s) about Jupiter 2.1.
This was just .. not programming in things, and thus large chunks
of the radio wouldn't work.  Notably, 5GHz didn't work.
2016-06-05 02:16:16 +00:00
Adrian Chadd
507fc9d5c4 [ath_hal] convert the MCI code over to work on Jupiter 2.1.
(Note: jupiter 1.0 was emulation / test silicon, and was never released
in production.  So, yes, AR_SREV_JUPITER() would really be fine.)
2016-06-05 02:15:29 +00:00
Adrian Chadd
85cb8105ab [acpi] graphics drivers want access to acpi lid handle
the graphics drivers can benefit from access to the lid handle for querying and getting notifications

Submitted by:	kmacy
Differential Revision:	https://reviews.freebsd.org/D6643
2016-06-05 02:02:51 +00:00
Kurt Lidl
aed8f11013 Add blacklist support to rlogind
Reviewed by:	rpaulo
Approved by:	rpaulo
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D6593
2016-06-05 01:42:58 +00:00
Adrian Chadd
79d0939e3c [ath_hal] Make the AR9462 2.0 initvals from ath9k compile.
The (upcoming) semi-working AR9462 2.1 support uses the 2.0 initvals
where appropriate, and those need to at least compile under freebsd.
2016-06-05 01:42:37 +00:00
Kurt Lidl
bccb3f5a81 Correct path for blacklistd.conf in OptionalObsoleteFiles.inc
Fix typo made when adding the blacklistd.conf file to OptionalObsoleteFiles.inc

Submitted by:	Herbert J. Skuhra ( herbert at mailbox.org )
Reviewed by:	rpaulo
Approved by:	rpaulo
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D6715
2016-06-05 01:40:08 +00:00
Bryan Drewery
f738a972ec Fix build after r301404.
X-MFC-With:	r301404
MFC after:	1 week
2016-06-04 23:34:51 +00:00
Mark Johnston
0f1c6d28f5 Document getent(1)'s ability to enumerate netgroup members.
MFC after:	3 days
2016-06-04 21:34:06 +00:00
Konstantin Belousov
7d6906b804 Fix markup.
Sponsored by:	The FreeBSD Foundation
2016-06-04 20:20:14 +00:00
Landon J. Fuller
56a4cdd131 bhnd(4): support IPX OTP NVRAM/SPROM data source
Add support for fetching SPROM data from OTP on chipsets with an
IPX OTP controller (including the BCM43225).

This integrates the NVRAM data source into the chipc_caps capability
structure, and adds a sprom_offset field that can be used with OTP
to locate the SPROM image data (found within the general use
region, H/W subregion).

This also removes one of two duplicate parse error messages reported by
both the bhnd_sprom driver and the underlying SPROM parsing API.

Approved by:	adrian (mentor)
Differential Revision:	https://reviews.freebsd.org/D6729
2016-06-04 19:58:01 +00:00
Landon J. Fuller
7ba7852fd7 Switch mips/sentry5 to bhnd(4), and unify with mips/broadcom
Now that bhnd(4) provides feature parity with the previous siba/mips
implementation, we can switch sentry5 over and begin lifting common
support code out for use across bhnd(4) embedded targets.

Changes:

- Fixed enumeration of siba(4) per-core address maps, required for
  discovery of memory mapped chipc flash region on siba(4) devices.
- Simplified bhnd kernel configuration (dropped 'bhndbus' option).
- Replaced files.broadcom's direct file references with their
  corresponding standard kernel options.
- Lifted out common bcma/siba nexus support, inheriting from the new
  generic bhnd_nexus driver.
- Dropped now-unused sentry5 siba code.
- Re-integrated BCM into the universe build now that it actually compiles.

Approved by:	adrian (mentor)
Differential Revision:	https://reviews.freebsd.org/D6712
2016-06-04 19:53:47 +00:00
Landon J. Fuller
e129bcd6bc bhnd(4): Add support for chipc-attached flash
This adds support for serial (via SPI) and parallel (via CFI) flash
as found on BCM47xx/BCM53xx SoCs.

Submitted by:   Michael Zhilin <mizhka@gmail.com>
Approved by:    adrian (mentor)
Differential Revision:  https://reviews.freebsd.org/D6250
2016-06-04 19:39:05 +00:00
Landon J. Fuller
2b693a88f6 Fix several MIPS/BCM-blocking bugs in bhnd(4) chipc
- Correct IRQ lines for UART (to fix IRQ lookup in future)
- Check device unit in resource assignment during chipc_add_child
- If chipc hint->size is RM_MAX_END, resource end should be same as window end
- Clear reference from resource list entry to resource in case of resource release
- Add CHIPC_GET_CAPS implementation
- Correct chipc flash constants (to be unshifted)
- Default implementation of get_attach_type should iterate over device tree
- Add default implementation for BHND_CHIPC_GET_CAPS usable by chipc grandchildren

Submitted by:	Michael Zhilin <mizhka@gmail.com>
Approved by:	adrian (mentor)
Differential Revision:	https://reviews.freebsd.org/D6584
2016-06-04 19:31:06 +00:00
Landon J. Fuller
5748426280 Update my e-mail address (and fix related typo in siba.4)
Approved by:	adrian (mentor)
Differential Revision:	https://reviews.freebsd.org/D6714
2016-06-04 19:00:11 +00:00
Ed Schouten
c54bbc2756 Don't test for INKERNEL to check whether we're in kernel space.
It turns out that <machine/param.h> actually defines a macro under this
name, even when we're not in kernelspace. This causes us to suppress
some macro definitions that are used by userspace apps.

PR:		210026
Reported by:	jbeich@
MFC after:	2 weeks
2016-06-04 18:57:00 +00:00
Bryan Drewery
66afa4152f Support all architectures by just using sysent.
PowerPC64 has two different ABIs, neither of which is elf64_freebsd_sysvec.
Using sysent and freebsd32_sysent achieves the same effect.

X-MFC-With:	r301130
MFC after:	1 week
Sponsored by:	EMC / Isilon Storage Division
2016-06-04 17:39:42 +00:00
Bryan Drewery
95348a57d0 Fix incorrect logic in r301394.
Reported by:	Mark Millard
2016-06-04 17:38:17 +00:00
Bryan Drewery
a81cff6ddd DIRDEPS_BUILD: Update GCC dependencies.
Sponsored by:	EMC / Isilon Storage Division
2016-06-04 17:37:25 +00:00
Bryan Drewery
b4dd422926 Follow-up r301287: Pass external compiler metadata when used.
This fixes WITH_SYSTEM_COMPILER, WITHOUT_CROSS_COMPILER, external compiler, to
pass the external compiler metadata rather than the ${CC} metadata.  On
a build host that has clang as CC it was passing the clang metadata rather than
GCC metadata during the build.
2016-06-04 17:17:10 +00:00
Baptiste Daroussin
e1fc61c114 Fix typo preventing pw {user,group}next -C from working as expected
Reported by:	Mike Selnet via forums.freebsd.org
MFC after:	3 days
2016-06-04 16:31:33 +00:00
Baptiste Daroussin
6525738f63 Import libucl snapshot 20160604
It replaces xxhash with mumhash
It fixes issues with msgpack on non x86
2016-06-04 14:57:25 +00:00
Baptiste Daroussin
6b85ccc651 Update libucl to 20160604 snapshot 2016-06-04 14:50:12 +00:00
Andrew Rybchenko
095bde9316 sfxge(4): always be ready to receive batched events
When the low-latency firmware variant is running, it is reported as not
being capable of batching RX events, but it can still do so if the
FORCE_EV_MERGING flag is set on an RXQ.  Therefore we need to handle
batched RX events even if the capability isn't set.

If this bug is fixed in the firmware such that the capability is set
even when running the low-latency firmware variant, it will almost
always be reported so I don't think we lose much by removing the check.

Submitted by:   Mark Spender <mspender at solarflare.com>
Sponsored by:   Solarflare Communications, Inc.
MFC after:      1 week
Differential Revision:  https://reviews.freebsd.org/D6705
2016-06-04 09:20:46 +00:00
Andrew Rybchenko
b839ed60bd sfxge(4): add helper to compute timer quantum
This also adjusts the timer values used to match the Linux net
driver implementation:
a) non-zero time intervals should result in at least one quantum
b) timer load/reload values are only zero biased for Falcon/Siena

Submitted by:   Andy Moreton <amoreton at solarflare.com>
Sponsored by:   Solarflare Communications, Inc.
MFC after:      1 week
Differential Revision:  https://reviews.freebsd.org/D6704
2016-06-04 09:17:45 +00:00
Adrian Chadd
64efe94d06 [ath] remove now unused parameters.
These will move to being part of the driver btcoex stuff I'm working
on, since the HAL doesn't know what to do with them.
2016-06-04 08:56:30 +00:00
Andrew Turner
d15667174d Use the UEFI event timer to update the time on arm and arm64. The current
code uses the GetTime function from the Runtime Service, however this has
been shown to not return a useable time on many arm64 UEFI implementations.

Reviewed by:	jhb, smh
Sponsored by:	ABT Systems Ltd
Differential Revision:	https://reviews.freebsd.org/D6709
2016-06-04 08:47:45 +00:00
Adrian Chadd
8cfcd74fa1 [ath_hal] add STOMP_AUDIO for AR9462/QCA9565.
Obtained from:	Linux ath9k
2016-06-04 07:29:10 +00:00
Adrian Chadd
8132a45dae [ath_hal] add placeholders for AUDIO stomp for Kite/Kiwi.
It just stomps all; which is enough for some testing.
2016-06-04 07:28:36 +00:00
Adrian Chadd
624fbf7d59 [ath_hal] add BTCOEX_STOMP_AUDIO; delete unused methods. 2016-06-04 07:28:09 +00:00
Adrian Chadd
cdf039af74 [run] fix TSF locking in RX radiotap.
Submitted by:	Imre Vadasz <imre@vdsz.com>
2016-06-04 07:18:39 +00:00
Conrad Meyer
48fed014cb ioat(4): Always log capabilities on attach
Different, relatively recent Intel Xeon hardware support radically different
features.  E.g., BDX support CRC32 while BDX-DE does not.

Reviewed by:	rpokala (spiritually)
Sponsored by:	EMC / Isilon Storage Division
2016-06-04 04:14:06 +00:00
Conrad Meyer
f8f92e9180 ioat(4): Export the number of available channels
Sponsored by:	EMC / Isilon Storage Division
2016-06-04 03:54:30 +00:00
Conrad Meyer
df1928aa33 ioat(4): Make channel indices unsigned
Sponsored by:	EMC / Isilon Storage Division
2016-06-04 03:52:19 +00:00
Cy Schubert
2712f5b016 Enable daily_ntpd_leapfile_enable by default. Otherwise an expired
leapfile will be ignored and ntpd will behave as if it has no
leapfile.

While here, remove an extraneous blank line.

Suggested by:	ache
MFC after:	1 week
2016-06-04 01:01:46 +00:00
Alexander Motin
32727d3b6d When negotiating NTB_SB01BASE_LOCKUP workaround, don't try to limit the
BAR size to 1MB.  According to Xeon v3 specifications and my tests, that
size register is write-once and so not writeable after BIOS written it.

Instead of that, make the code work with BAR of any sufficient size,
properly calculating offset within its base.  It also simplifies the code.

Discussed with:	cem
MFC after:	2 weeks
Sponsored by:	iXsystems, Inc.
2016-06-04 00:18:59 +00:00
Alexander Motin
c096696f31 When negotiating MSIX parameters, give other head time to see our
NTB_MSIX_RECEIVED status, before making upper layers overwrite it.

This is not completely perfect, but now it works better then before.

MFC after:	2 weeks
Sponsored by:	iXsystems, Inc.
2016-06-04 00:08:37 +00:00
Pedro F. Giffuni
e8c66cf087 libiberty: prevent integer overflow.
Take care of very old bug leading to heap-buffer overflow by
processing certain file headers via bfd binary.

PR:		200888
Obtained from:	OpenBSD
MFC after:	2 weeks
2016-06-03 21:37:24 +00:00
Bryan Drewery
987c375f87 WITH_META_MODE: Avoid "building" .depend if there is nothing to do.
This avoids 'Building /path/.depend' when it will not actually produce a
file.

Sponsored by:	EMC / Isilon Storage Division
2016-06-03 21:35:19 +00:00
Pedro F. Giffuni
9051825205 MFV r300961:
one-true-awk: replace 0 with NULL for pointers

Also remove a redundant semicolon.
2016-06-03 21:23:11 +00:00
Pedro F. Giffuni
95a9e5d682 tegra124: use roundup/rounddown macros from <sys/param.h>. 2016-06-03 21:11:34 +00:00
Bryan Drewery
bbfcc681bc WITHOUT_CROSS_COMPILER: Fix installworld.
Since no WORLDTMP/usr/bin/cc is created, cc cannot be found
during installworld time since /usr/bin is not in the PATH.
Pass along the known compiler metadata to allow installworld
to work.  The same fix was used for WITH_SYSTEM_COMPILER.

A better route would be to store a cookie in buildworld
containing this compiler metadata and then using that
at install time, rather than rerunning cc.

Reported by:	Mark Millard
Sponsored by:	EMC / Isilon Storage Division
2016-06-03 20:49:49 +00:00
Bryan Drewery
6c24213e61 WITH_CCACHE_BUILD + WITH_META_MODE: Ignore ccache changes.
Ccache will not affect the output of the objects, so just ignore it for
meta mode handling.  This avoids having everything rebuild if ccache is
updated.

Sponsored by:	EMC / Isilon Storage Division
2016-06-03 19:25:45 +00:00
Bryan Drewery
92edc96667 WITH_META_MODE: Don't expect meta files for side-effect generated files.
The first file in these lists will generate everything else so only
it should be getting a .meta file.  With bmake's missing=yes meta
feature these would otherwise cause a rebuild without the
.NOMETA hint.

Sponsored by:	EMC / Isilon Storage Division
2016-06-03 19:25:41 +00:00