* If compiled with EXT_RESOURCES look up the "biu" and "ciu" clocks in
the DT
* Don't use custom property "bus-frequency" but the standard one
"clock-frequency"
* Use the DT property max-frequency and fall back to 200Mhz if it don't exists
* Add more mmc caps suported by the controller
* Always ack all interrupts
* Subclassed driver can supply an update_ios so they can handle update
the clocks accordingly
* Take care of the DDR bit in update_ios (no functional change since we
do not support voltage change for now)
* Make use of the FDT bus-width property
libfdt now provides methods to iterate through subnodes and properties in a
convenient fashion.
Replace our ofw_fdt_{peer,child} searches with calls to their corresponding
libfdt methods. Rework ofw_fdt_nextprop to use the
fdt_for_each_property_offset macro, making it even more obvious what it's
doing.
No functional change intended.
Reviewed by: nwhitehorn
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D14225
the Server Base System Architecture to be a subset of the pl011 r1p5. As
we don't use the removed features it is safe to just attach to the existing
driver as is.
Sponsored by: DARPA, AFRL
network device pointer might be NULL. Wait for any pending tasks to
complete before calling axge_stop().
MFC after: 1 week
Sponsored by: Mellanox Technologies
No implementation of fpu_kern_enter() can fail, and it was causing needless
error checking boilerplate and confusion. Change the return code to void to
match reality.
(This trivial change took nine days to land because of the commit hook on
sys/dev/random. Please consider removing the hook or otherwise lowering the
bar -- secteam never seems to have free time to review patches.)
Reported by: Lachlan McIlroy <Lachlan.McIlroy AT isilon.com>
Reviewed by: delphij
Approved by: secteam (delphij)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D14380
Also correct a typo in the comment for these values, noted by jimharris.
Reviewed by: jimharris
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3715
2. Sysctls to enable/disable driver_state_dump and error_recovery.
3. Sysctl to control the delay between hw/fw reinitialization and
restarting the fastpath.
4. Stop periodic stats retrieval if interface has IFF_DRV_RUNNING flag off.
5. Print contents of PEG_HALT_STATUS1 and PEG_HALT_STATUS2 on heartbeat
failure.
6. Speed up slowpath shutdown during error recovery.
7. link_state update using atomic_store.
8. Added timestamp information on driver state and minidump captures.
9. Added support for Slowpath event logging
10.Added additional failure injection types to simulate failures.
A super-set of the functionality of jedec_ts(4). jedec_dimm(4) reports asset
information (Part Number, Serial Number) encoded in the "Serial Presence
Detect" (SPD) data on JEDEC DDR3 and DDR4 DIMMs. It also calculates and
reports the memory capacity of the DIMM, in megabytes. If the DIMM includes
a "Thermal Sensor On DIMM" (TSOD), the temperature is also reported.
Reviewed by: cem
MFC after: 1 week
Relnotes: yes
Sponsored by: Panasas
Differential Revision: https://reviews.freebsd.org/D14392
Discussed with: avg, cem
Tested by: avg, cem (previous version, no semantic changes)
Add chvgpio(4) driver for Intel Z8xxx SoC family. This product
was formerly known as Cherry Trail but Linux and OpenBSD drivers
refer to it as Cherry View. This driver is derived from OpenBSD
one so the name is kept for alignment with another BSD system.
Submitted by: Tom Jones <tj@enoti.me>
Reviewed by: gonzo, wblock(man page)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D13086
Remove bitfields from defined structures as they are not portable.
Instead use shift and mask macros in the driver and nvmecontrol application.
NVMe is now working on powerpc64 host.
Submitted by: Michal Stanek <mst@semihalf.com>
Obtained from: Semihalf
Reviewed by: imp, wma
Sponsored by: IBM, QCM Technologies
Differential revision: https://reviews.freebsd.org/D13916
Now that we're queueing BIO_DELETE requests in the CAM I/O scheduler,
it make sense to try to combine as many as possible into a single
request to send down to hardware. Hopefully, lots of larger requests
like this are better than lots of individual transactions.
Note for future: need to limit based on total size of the trim
request. Should also collapse adjacent ranges where possible to
increase the size of the max payload.
Sponsored by: Netflix
Trying to grab locks during cngrab() when entering the debugger is
deadlock prone as all other CPUs are already halted (and thus unable
to release locks) when cngrab() is invoked. One could instead use
try-locks. However, the case that the try-lock fails still has to
be handled. In addition, if the try-lock works it doesn't provide
any greater ordering guarantees than is already provided by entering
and exiting DDB. It is simpler to define a simpler path for the
case that the try-lock would fail and always use that when entering
DDB. Messing with timers, etc. when entering DDB is dubious even if
the try-lock succeeds.
This patch attempts to use the smallest possible set of operations to
grab the vt(4) console when entering DDB without using any locks.
Reviewed by: emaste
Tested by: Matthew Macy
MFC after: 1 week
This consolidates all of the DDP state in one place. Also, the code has
now been fixed to ensure that DDP state is only accessed for DDP
connections. This should not be a functional change but makes it cleaner
and easier to add state for other TOE socket modes in the future.
MFC after: 1 month
Sponsored by: Chelsio Communications
Make vm_wait() take the vm_object argument which specifies the domain
set to wait for the min condition pass. If there is no object
associated with the wait, use curthread' policy domainset. The
mechanics of the wait in vm_wait() and vm_wait_domain() is supplied by
the new helper vm_wait_doms(), which directly takes the bitmask of the
domains to wait for passing min condition.
Eliminate pagedaemon_wait(). vm_domain_clear() handles the same
operations.
Eliminate VM_WAIT and VM_WAITPFAULT macros, the direct functions calls
are enough.
Eliminate several control state variables from vm_domain, unneeded
after the vm_wait() conversion.
Scetched and reviewed by: jeff
Tested by: pho
Sponsored by: The FreeBSD Foundation, Mellanox Technologies
Differential revision: https://reviews.freebsd.org/D14384
VirtIO V1 provides configuration in multiple VENDOR capabilities so this
allows all of the configuration to be discovered.
Reviewed by: jhb
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D14325
zero, matching the IEEE 1275 standard. Since these internal error paths
have never, to my knowledge, been taken, behavior is unchanged.
Reported by: gonzo
MFC after: 2 weeks
and index. A private function to do exactly that already existed, so this
renames gpio_pin_get_by_ofw_impl() to gpio_pin_get_by_ofw_propidx() and
provides a declaration for it in a public header.
Previously there were functions to get a pin by property name (assuming
there would only be one pin defined for the name), or by index (asuming
the property has the standard name "gpios"). It turns out there are
devicetree bindings that describe properties with names other than "gpios"
which can describe multiple pins. Hence the need to retrieve the Nth item
from a named property.
rather than relying on a set of canned EARLY_DRIVER_MODULE() statements in
the ofw_iicbus source. This means hw drivers will no longer be required to
use one of a few predefined driver names. They will also now be able to
decide themselves if they want to use DRIVER_MODULE or EARLY_DRIVER_MODULE
and to set which pass to attach on for early modules.
Mainly, this adds extern declarations for the driver and devclass variables.
It also renames ofwiicbus_devclass to ofw_iicbus_devclass to be consistant
with the way we use ofw_ prefixes on this stuff.
would be safe, but the function also tries to destroy mutexes that never
got created).
I guess this can only happen when imx_ehci_detach() is called on the
error-exit path from imx_ehci_attach(), and that path never got exercised
before today.
artificial NOMATCH usb does in lieu of creating a device_t for devices
with no drivers. Also, correct bus to be 'uhub' since where USB
devices attach, even though 'usb' is more logical, we need the
physical bus here.
Submitted by: hps@
Panasas discovered that ioctl(SIOCGLAGGPORT) returns ENOTTY for mxge(4) when
the NIC is not a member of a lagg. This came as a surprise, because the
SIOCGLAGGPORT handler in if_lagg.c only returns ENOENT (if run against the
laggX interface, rather than a physical port) or EINVAL (if run against a
non-member physical port). This behavior was not seen with other drivers,
such as bge(4), igb(4), and cxl(4). When I compared their respective ioctl
handlers, I found that they all called ether_ioctl() for the default (i.e.
unhandled) case; by contrast, mxge(4) only calls ether_ioctl() for two
specific cases, and returns ENOTTY for the default case.
Remove the two cases which explicitly call ether_ioctl(), and let the
default case call it instead. This matches what the vast majority of the NIC
drivers do.
Reviewed by: kmacy
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D14381
BWN_DEBUG_HWCRYPTO debug flag.
The MAC will attempt decryption (and set BWN_RX_MAC_DEC) even if a key has
not been supplied to the hardware; this is expected behavior, and there's
no need to spam users' console with this debugging printf.
compilation under FreeBSD. The mthca driver was temporarily removed as
part of the Linux 4.9 RoCE/infinband upgrade.
Top commit in Linux source tree:
69973b830859bc6529a7a0468ba0d80ee5117826
Sponsored by: Mellanox Technologies
Previously, the address regions described by disabled admatch entries would
be treated as being mapped to the given core; while incorrect, this was
essentially harmless given that the entries describe unused address space
on the few affected devices.
We now perform parsing of per-core admatch registers and interrupt flags in
siba_erom, correctly skip any disabled admatch entries, and use the
siba_erom API in siba_add_children() to perform enumeration of attached
cores.
This is a first part of the change. It makes the drivers to calculate
the required number of chain frames to satisfy worst case scenarios, but
it does not change existing overly strict limits on them. The next step
will be to rewrite the allocator to not require megabytes of physically
contiguous address space, that may be problematic if done after boot,
after doing which the limits can be removed. Until that this code can
just correct user set limits, if they are set too high.
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D14261
