Commit Graph

496 Commits

Author SHA1 Message Date
Achim Leubner
7cfc62d866 aic7xxx: Do not support device IDs 0x8081, 0x8088 and 0x8089 to avoid
conflicts with the new PMC Adaptec controller families supported by aacraid
2015-06-05 11:37:54 +00:00
Warner Losh
04b7478426 shared_scb_data set, but never used, remove it. 2014-08-08 11:47:04 +00:00
John Baldwin
5d00bfa3cd Fix a few more drivers that were explicitly destroying the bus_dma
map created by bus_dmamem_alloc().
2014-06-11 17:03:14 +00:00
Warner Losh
3bdf775801 NO_MAN= has been deprecated in favor of MAN= for some time, go ahead
and finish the job. ncurses is now the only Makefile in the tree that
uses it since it wasn't a simple mechanical change, and will be
addressed in a future commit.
2014-04-13 05:21:56 +00:00
Warner Losh
8a27a339b6 Remove instances of variables that were set, but never used. gcc 4.9
warns about these by default.
2014-03-30 23:43:36 +00:00
Warner Losh
c0159aff30 Don't complain about missing prototypes to ease bootstrap issues. 2014-02-27 08:21:28 +00:00
Scott Long
50b464aa1a Remove aicasm as a build dependency. It made sense when the ahc and ahd
drivers and their firmware were under active development, but those days
have passed.  The firmware now exists in pre-compiled form, no longer
dependent on it's sources or on aicasm.  If you wish to rebuild the
firmware from source, the glue still exists under the 'make firmware'
target in sys/modules/aic7xxx.

This also fixes the problem introduced with r257777 et al with building
kernels the old fashioned way in sys/$arch/compile/$CONFIG when the
ahc/ahd drivers were included.
2014-01-07 19:33:17 +00:00
Dimitry Andric
35e1ba0a3b Remove another unused static const variable num_chip_names, from
aic7xxx.c this time.

Noticed by:	pluknet
MFC after:	3 days
2013-12-24 18:52:36 +00:00
Dimitry Andric
7d9393a28c Remove unused static const variable num_chip_names from aic79xx.c.
Reviewed by:	gibbs
MFC after:	3 days
2013-12-24 16:46:06 +00:00
Ian Lepore
f827d58e4d Rework the aicasm build machinery so that it gets built along with toolchain
components instead of with the kernel and/or modules.  This ensures that it
gets built with the host compiler, not the compiler in obj/... used to build
the target components (which may be a cross-compiler outputting code for a
different architecture and using header files with types and options set up
for the wrong architecture).

Reviewed by:	imp
2013-11-04 15:55:04 +00:00
Alexander Motin
5e63cdb457 Partial MFproject/camlock r256671:
Fix several target mode SIMs to not blindly clear ccb_h.flags field of
ATIO CCBs.  Not all CCB flags there belong to them.
2013-10-21 06:04:39 +00:00
Scott Long
c68534f1d5 Update PCI drivers to no longer look at the MEMIO-enabled bit in the PCI
command register.  The lazy BAR allocation code in FreeBSD sometimes
disables this bit when it detects a range conflict, and will re-enable
it on demand when a driver allocates the BAR.  Thus, the bit is no longer
a reliable indication of capability, and should not be checked.  This
results in the elimination of a lot of code from drivers, and also gives
the opportunity to simplify a lot of drivers to use a helper API to set
the busmaster enable bit.

This changes fixes some recent reports of disk controllers and their
associated drives/enclosures disappearing during boot.

Submitted by:	jhb
Reviewed by:	jfv, marius, achadd, achim
MFC after:	1 day
2013-08-12 23:30:01 +00:00
Ulrich Spörlein
b4d0045dfb Match function definition to declaration and call-site.
SVN r95378 refactored ahc_9005_subdevinfo_valid out into a separate
function but swapped the vendor/subvendor and device/subdevice pairs of
the parameters.

Found by:	Coverity Prevent, CID 744931
Reviewed by:	gibbs
2013-07-25 09:30:00 +00:00
Eitan Adler
7a2b450ff8 Fxi a bunch of typos.
PR:	misc/174625
Submitted by:	Jeremy Chadwick <jdc@koitsu.org>
2013-05-10 16:41:26 +00:00
Neel Natu
5685b37212 Correct misleading bootverbose output: ahc_isa_probe -> ahc_isa_identify 2013-04-17 02:33:56 +00:00
Konstantin Belousov
dd0b4fb6d5 Reform the busdma API so that new types may be added without modifying
every architecture's busdma_machdep.c.  It is done by unifying the
bus_dmamap_load_buffer() routines so that they may be called from MI
code.  The MD busdma is then given a chance to do any final processing
in the complete() callback.

The cam changes unify the bus_dmamap_load* handling in cam drivers.

The arm and mips implementations are updated to track virtual
addresses for sync().  Previously this was done in a type specific
way.  Now it is done in a generic way by recording the list of
virtuals in the map.

Submitted by:	jeff (sponsored by EMC/Isilon)
Reviewed by:	kan (previous version), scottl,
	mjacob (isp(4), no objections for target mode changes)
Discussed with:	     ian (arm changes)
Tested by:	marius (sparc64), mips (jmallet), isci(4) on x86 (jharris),
	amd64 (Fabian Keil <freebsd-listen@fabiankeil.de>)
2013-02-12 16:57:20 +00:00
Baptiste Daroussin
6a969461db remove redundant yyparse declarations
PR:		conf/174079
Submitted by:	Garrett Cooper <yanegomi@gmail.com>
2012-12-05 20:28:44 +00:00
Dimitry Andric
cde1b992cf Fix a bug in aicasm_gram.y, noted by a newer clang 3.2 snapshot: it
compared an enum scope_type against a yacc-generated define, so the
condition would always be false.

MFC after:	3 days
2012-11-14 18:54:08 +00:00
Dimitry Andric
d265aafb5a In sys/dev/aic7xxx/aic79xx_osm.c, function ahd_attach(), initialize the
'path' variable to NULL, to avoid using it uninitialized in certain
cases.

Found by:	clang
MFC after:	1 week
2012-08-06 20:01:32 +00:00
Eitan Adler
2bd29f8f66 Remove variables which are initialized but never used thereafter
reported by gcc46 warning

Reviewed by:	scottl
Approved by:	cperciva
MFC after:	1 week
2012-08-05 08:08:34 +00:00
Kenneth D. Merry
b79dc8a8da Fix an issue that caused the kernel to panic inside CTL when trying
to attach to target capable HBAs that implement the old immediate
notify (XPT_IMMED_NOTIFY) and notify acknowledge (XPT_NOTIFY_ACK)
CCBs.  The new API has been in place since SVN change 196008 in
2009.

The solution is two-fold:  fix CTL to handle the responses from the
HBAs, and convert the HBA drivers in question to use the new API.

These drivers have not been tested with CTL, so how well they will
interoperate with CTL is unknown.

scsi_target.c:	Update the userland target example code to use the
		new immediate notify API.

scsi_ctl.c:	Detect when an immediate notify CCB is returned
		with CAM_REQ_INVALID or CAM_PROVIDE_FAIL status,
		and just free it.

		Fix a duplicate assignment.

aic79xx.c,
aic79xx_osm.c:	Update the aic79xx driver to use the new API.
		Target mode is not enabled on for this driver, so
		the changes will have no practical effect.

aic7xxx.c,
aic7xxx_osm.c:	Update the aic7xxx driver to use the new API.

sbp_targ.c:	Update the firewire target code to work with the
		new API.

mpt_cam.c:	Update the mpt(4) driver to work with the new API.
		Target mode is only enabled for Fibre Channel
		mpt(4) devices.

MFC after:	3 days
2012-06-26 14:51:35 +00:00
Dimitry Andric
56e4bfe54d Fix build of aicasm when CC=clang. This was due to a side-effect of the
EARLY_BUILD macro: the -Qunused-arguments flag isn't passed anymore when
building this particular program.  However, with clang 3.1 and -Werror,
such unused argument warnings are flagged as errors, causing buildkernel
to fail at this stage, due to the -nostdinc flag passed during linking.
Since the -nostdinc flag isn't actually needed, just remove it.

X-MFC-With:	r236528
2012-06-04 20:36:11 +00:00
Dimitry Andric
cec20e143c Make aicasm compile without warnings if -Wpointer-sign is enabled.
MFC after:	3 days
2012-06-04 17:22:43 +00:00
Robert Millan
fb27c25a9a Follow non-BSD case when GNU/Hurd is detected. 2012-03-25 21:54:36 +00:00
Juli Mallett
f1bd1e9dd7 Remove comments about creating DMA tags as children of the DMA tags of their
parent bus where the code has now been modified to do so.

Reviewed by:	scottl
2012-03-12 19:29:32 +00:00
Dimitry Andric
487d088e4e Add "%option noinput" to aicasm_scan.l and aicasm_macro_scan.l, so no
unneeded input functions will be emitted.

Spotted by:	arundel
MFC after:	1 week
2011-12-16 00:04:28 +00:00
Ed Maste
cb0f0a028f Improve portability #defines for compiling aicasm on other systems.
Submitted by:	Robert Millan  rmh debian.org
Obtained from:	Debian GNU/kFreeBSD
2011-07-15 00:36:47 +00:00
Dimitry Andric
58ff0f42ba Remove support for the Intel C Compiler from the build infrastructure.
This support has not worked for several years, and is not likely to work
again, unless Intel decides to release a native FreeBSD version of their
compiler. ;)
2011-04-19 18:09:21 +00:00
John Baldwin
3b0a4aef96 Do a sweep of the tree replacing calls to pci_find_extcap() with calls to
pci_find_cap() instead.
2011-03-23 13:10:15 +00:00
Marius Strobl
e320a9ff1e Allocate the DMA memory shared between the host and the controller as
coherent.

Approved by:	gibbs
MFC after:	2 weeks
2011-03-12 20:36:52 +00:00
Rebecca Cran
6bccea7c2b Fix typos - remove duplicate "the".
PR:	bin/154928
Submitted by:	Eitan Adler <lists at eitanadler.com>
MFC after: 	3 days
2011-02-21 09:01:34 +00:00
Rui Paulo
ea7303d127 Revert r213765. This is required because our build infrastructure uses
the host lex instead of the lex built during buildworld. I will MFC the
lex changes soon and in a few weeks this I'll commit again r213765.
2010-10-14 19:19:19 +00:00
Rui Paulo
c42a2be28f Define YY_NO_INPUT. This makes aicasm buildable by clang with Werror
turned on.
2010-10-13 10:33:01 +00:00
Rui Paulo
187278cadc For every instance of '.if ${CC} == "foo"' or '.if ${CC} != "foo"' in
Makefiles or *.mk files, use ${CC:T:Mfoo} instead, so only the basename
of the compiler command (excluding any arguments) is considered.

This allows you to use, for example, CC="/nondefault/path/clang -xxx",
and still have the various tests in bsd.*.mk identify your compiler as
clang correctly.

ICC if cases were also changed.

Submitted by:	Dimitry Andric <dimitry at andric.com>
2010-08-17 20:39:28 +00:00
Justin T. Gibbs
b744190698 Correct logic bug in aicasm's undefined register bit access detection code.
The code in question verifies that all register write operations only change
bits that are defined (in the register definition file) for that effected
register.  The bug effectively disabled this checking.

o Fix the check by testing the opcode against all supported read ("and" based)
  operands.

o Add missing bit definitions to the aic7xxx and aic79xx register definition
  files so that the warning (treated as a fatal error) does not spuriously
  fire.

Reported by:	Pawel Worach <pawel.worach@gmail.com>
MFC after:	1 week
2010-07-14 14:31:18 +00:00
Rebecca Cran
31615ef723 Document the usfs driver and the NO_SYSCTL_DESCR option, and update the comment for umass.
Don't include the sysctl description variables in aic7xxx when NO_SYSCTL_DESCR is used.

Approved by:	rrs (mentor)
2010-02-08 20:57:42 +00:00
Gavin Atkinson
7964930201 Spell "Hz" correctly wherever it is user-visible.
PR:		bin/142566
Submitted by:	N.J. Mann   njm njm.me.uk
Approved by:	ed (mentor)
MFC after:	2 weeks
2010-01-12 17:59:58 +00:00
Ed Schouten
03bc68ca09 Disable K&R style function definitions for WARNS=6.
Unfortunately there are two slight problems with that:

- Yacc and lex might generate code that generates warnings because of
  this. Require yacc and lex to be rebuilt during bootstrap. I'm not
  incrementing __FreeBSD_version here, because I assume someone else
  will do this eventually.

- When running `make buildkernel', it uses share/mk from the source
  treeo to build aicasm. Because aicasm also depends on lex, this would
  break. Lower WARNS to 5 for now. We should just increment it to 6
  again somewhere in the very far future.
2009-12-31 00:07:26 +00:00
Ed Schouten
73c4bad04d Add missing `void' keywords. 2009-12-30 16:56:50 +00:00
Attilio Rao
884015f6fc Add sysctls in ahd(4) in order to keep track of different classes of
errors. So far 3 different classes are present (correctable,
uncorrectable and fatal) but more can be added easilly.

Obtained from:	Sandvine Incorporated
Reviewed by:	emase, gibbs
Sponsored by:	Sandvine Incorporated
MFC:		2 weeks
2009-11-13 22:57:20 +00:00
Christian Brueffer
a452248814 Add support for Adaptec 39320LPE adapters.
PR:		124202
Submitted by:	Andre Albsmeier <Andre.Albsmeier@siemens.com>
Reviewed by:	gibbs
MFC after:	1 week
2009-10-30 16:23:56 +00:00
Christian Brueffer
56d7cd7cf1 Add a missing free() call.
PR:		138379
Submitted by:	Patroklos Argyroudis <argp@census-labs.com>
Reviewed by:	gibbs
MFC after:	1 week
2009-10-21 14:09:06 +00:00
Scott Long
52c9ce25d8 Separate the parallel scsi knowledge out of the core of the XPT, and
modularize it so that new transports can be created.

Add a transport for SATA

Add a periph+protocol layer for ATA

Add a driver for AHCI-compliant hardware.

Add a maxio field to CAM so that drivers can advertise their max
I/O capability.  Modify various drivers so that they are insulated
from the value of MAXPHYS.

The new ATA/SATA code supports AHCI-compliant hardware, and will override
the classic ATA driver if it is loaded as a module at boot time or compiled
into the kernel.  The stack now support NCQ (tagged queueing) for increased
performance on modern SATA drives.  It also supports port multipliers.

ATA drives are accessed via 'ada' device nodes.  ATAPI drives are
accessed via 'cd' device nodes.  They can all be enumerated and manipulated
via camcontrol, just like SCSI drives.  SCSI commands are not translated to
their ATA equivalents; ATA native commands are used throughout the entire
stack, including camcontrol.  See the camcontrol manpage for further
details.  Testing this code may require that you update your fstab, and
possibly modify your BIOS to enable AHCI functionality, if available.

This code is very experimental at the moment.  The userland ABI/API has
changed, so applications will need to be recompiled.  It may change
further in the near future.  The 'ada' device name may also change as
more infrastructure is completed in this project.  The goal is to
eventually put all CAM busses and devices until newbus, allowing for
interesting topology and management options.

Few functional changes will be seen with existing SCSI/SAS/FC drivers,
though the userland ABI has still changed.  In the future, transports
specific modules for SAS and FC may appear in order to better support
the topologies and capabilities of these technologies.

The modularization of CAM and the addition of the ATA/SATA modules is
meant to break CAM out of the mold of being specific to SCSI, letting it
grow to be a framework for arbitrary transports and protocols.  It also
allows drivers to be written to support discrete hardware without
jeopardizing the stability of non-related hardware.  While only an AHCI
driver is provided now, a Silicon Image driver is also in the works.
Drivers for ICH1-4, ICH5-6, PIIX, classic IDE, and any other hardware
is possible and encouraged.  Help with new transports is also encouraged.

Submitted by:	scottl, mav
Approved by:	re
2009-07-10 08:18:08 +00:00
Xin LI
9ceb784eaf Re-enable WARNS=6 after my universe test. 2009-06-02 17:27:54 +00:00
Xin LI
5bb0de0503 Initialize the match structure. This is unnecessary but gcc insists to
complain about it when we raise the WARNS level.
2009-06-01 21:07:54 +00:00
Xin LI
a3f2e28dea Revert the WARNS change for now, need some time to fix the real problem. 2009-06-01 19:06:08 +00:00
Xin LI
7ff1b9822d Mark as WARNS=6. 2009-06-01 18:43:33 +00:00
Xin LI
b18a2ef17f Code cleanups to make this WARNS=6 clean.
PR:		bin/96128
2009-06-01 18:42:16 +00:00
Warner Losh
155a83e87a remove now-redunant cardbus attachment. 2009-03-09 13:23:54 +00:00
Sam Leffler
39297ba455 Make ddb command registration dynamic so modules can extend
the command set (only so long as the module is present):
o add db_command_register and db_command_unregister to add and remove
  commands, respectively
o replace linker sets with SYSINIT's (and SYSUINIT's) that register
  commands
o expose 3 list heads: db_cmd_table, db_show_table, and db_show_all_table
  for registering top-level commands, show operands, and show all operands,
  respectively

While here also:
o sort command lists
o add DB_ALIAS, DB_SHOW_ALIAS, and DB_SHOW_ALL_ALIAS to add aliases
  for existing commands
o add "show all trace" as an alias for "show alltrace"
o add "show all locks" as an alias for "show alllocks"

Submitted by:	Guillaume Ballet <gballet@gmail.com> (original version)
Reviewed by:	jhb
MFC after:	1 month
2008-09-15 22:45:14 +00:00