systems with more than 4GB of physical memory.
To remotely debug the system 'stealthy' which has a kernel
with this change installed and firewire properly configured:
% fwcontrol -m stealthy (or stealthy's firewire EUI64)
% kgdb kernel /dev/fwmem0.0
sys/dev/firewire/fwohci.c:
Rather than hard code the upper limit for hw based
automatic responses to remote DMA requests at 4GB,
program the hardware using Maxmem, the page number
one higher than the highest physical page detected
in the system.
While here, garbage collect more useless splfw()
calls.
Submitted by: gibbs
MFC after: 1 week
Sponsored by: Spectra Logic
MFSpectraBSD: 1110994 on 2015/01/06
Do not pass wrong alignment value to fwdma_malloc_multiseg and ultimately
to contigalloc. In addition to being wrong, this causes insta-panic in
certain cases due to safety assertion - the alignment is required to be
the power of two and the value we calculate here seldom is.
MFC after: 1 month
Commit my version of style(9) pass over the firewire code. Now that
other people have started changing the code carrying this is as a
local patch is not longer a viable option.
MFC after: 1 month
These changes prevent sysctl(8) from returning proper output,
such as:
1) no output from sysctl(8)
2) erroneously returning ENOMEM with tools like truss(1)
or uname(1)
truss: can not get etype: Cannot allocate memory
there is an environment variable which shall initialize the SYSCTL
during early boot. This works for all SYSCTL types both statically and
dynamically created ones, except for the SYSCTL NODE type and SYSCTLs
which belong to VNETs. A new flag, CTLFLAG_NOFETCH, has been added to
be used in the case a tunable sysctl has a custom initialisation
function allowing the sysctl to still be marked as a tunable. The
kernel SYSCTL API is mostly the same, with a few exceptions for some
special operations like iterating childrens of a static/extern SYSCTL
node. This operation should probably be made into a factored out
common macro, hence some device drivers use this. The reason for
changing the SYSCTL API was the need for a SYSCTL parent OID pointer
and not only the SYSCTL parent OID list pointer in order to quickly
generate the sysctl path. The motivation behind this patch is to avoid
parameter loading cludges inside the OFED driver subsystem. Instead of
adding special code to the OFED driver subsystem to post-load tunables
into dynamically created sysctls, we generalize this in the kernel.
Other changes:
- Corrected a possibly incorrect sysctl name from "hw.cbb.intr_mask"
to "hw.pcic.intr_mask".
- Removed redundant TUNABLE statements throughout the kernel.
- Some minor code rewrites in connection to removing not needed
TUNABLE statements.
- Added a missing SYSCTL_DECL().
- Wrapped two very long lines.
- Avoid malloc()/free() inside sysctl string handling, in case it is
called to initialize a sysctl from a tunable, hence malloc()/free() is
not ready when sysctls from the sysctl dataset are registered.
- Bumped FreeBSD version to indicate SYSCTL API change.
MFC after: 2 weeks
Sponsored by: Mellanox Technologies
shifts into the sign bit. Instead use (1U << 31) which gets the
expected result.
This fix is not ideal as it assumes a 32 bit int, but does fix the issue
for most cases.
A similar change was made in OpenBSD.
Discussed with: -arch, rdivacky
Reviewed by: cperciva
child is still present. If not, return 'handled' and don't print
anything (this is expected behavior). We expect an interrupt on eject,
power-down and/or shutdown.
Move the interupt handler to a driver_intr_t type function as it was trying
to do way to much for a lightweight filter interrupt function.
Introduce much more locking around fc->mtx. Tested this for lock reversals
and other such lockups. Locking seems to be working better, but there
is much more to do with regard to locking. The most significant lock is
in the BUS RESET handler. It was possible, before this checkin, to set
a bus reset via "fwcontrol -r" and have the BUS RESET handler fire before
the code responsible for asserting BUS RESET was complete. This locking
fixes that issue.
Move some of the memory allocations in the fc struct to the attach function
in firewire.c
Rework the businfo.generation indicator to be merely a on/off bit now.
It's purpose according to spec is to notify the bus that the config ROM
has changed. That's it.
Catch and squash a possible panic in SBP where in the SBP_LOCK was held
during a possible error case. The error handling code would definitely
panic as it would try to acquire the SBP_LOCK on entrance.
Catch and squash a camcontrol/device lockup when firewire drives go away.
When a firewire device was powered off or disconnected from the firewire
bus, a "camcontrol rescan all" would hang trying to poll removed devices
as they were not properly detached. Don't do that.
Approved by: scottl
MFC after: 2 weeks
This is enabled by default. It should be disabled for
those who are uneasy with peeking/poking from FireWire.
Please note sbp(4) and dcons(4) over FireWire need
this feature.
- lock its own locks and drop Giant.
- create its own taskqueue thread.
- split interrupt routine
- use interrupt filter as a fast interrupt.
- run watchdog timer in taskqueue so that it should be
serialized with the bottom half.
- add extra sanity check for transaction labels.
disable ad-hoc workaround for unknown tlabels.
- add sleep/wakeup synchronization primitives
- don't reset OHCI in fwohci_stop()
- Wake up DMA engine after adding a new receive buffer.
- Skip buffers which have unknown state after error.
- More rigid error detection.
MFC after: 1 week
* all
- s/__FUNCTION__/__func__/.
Submitted by: Stefan Farfeleder <stefan@fafoe.narf.at>
- Compatibility for RELENG_4 and DragonFly.
* firewire
- Timestamp just before queuing.
- Retry bus probe if it fails.
- Use device_printf() for debug message.
- Invalidiate CROM while update.
- Don't process minimum/invalid CROM.
* sbp
- Add ORB_SHORTAGE flag.
- Add sbp.tags tunable.
- Revive doorbell support. It's not enabled by default.
And many changes.
* all
- Major change of struct fw_xfer.
o {send,recv}.buf is splitted into hdr and payload.
o Remove unnecessary fields.
o spd is moved under send and recv.
- Remove unnecessary 'volatile' keyword.
- Add definition of rtcode and extcode.
* firewire.c
- Ignore FWDEVINVAL devices in fw_noderesolve_nodeid().
- Check the existance of the bind before call STAILQ_REMOVE().
- Fix bug in the fw_bindadd().
- Change element of struct fw_bind for simplicity.
- Check rtcode of response packet.
- Reduce split transaction timeout to 200 msec.
(100msec is the default value in the spec.)
- Set watchdog timer cycle to 10 Hz.
- Set xfer->tv just before calling fw_get_tlabel().
* fwohci.c
- Simplifies fwohci_get_plen().
* sbp.c
- Fix byte order of multibyte scsi_status informations.
- Split sbp.c and sbp.h.
- Unit number is not necessary for FIFO¤ address.
- Reduce LOGIN_DELAY and SCAN_DELAY to 1 sec.
- Add some constants defineded in SBP-2 spec.
* fwmem.c
- Introduce fwmem_strategy() and reduce memory copy.
