The SCMI specification describes a set of standard interfaces for power,
performance and system management.
SCMI is extensible and provides interfaces to access functions which are
often implemented in firmwares in the System Control Processor (SCP).
This implements Shared Memory-based transfer, which is one of the ways on
how messages are exchanged between agents and the platform.
This includes a driver for ARM Message Handling Unit (MHU) Doorbell, which
is a mechanism that the caller can use to alert the callee of the presence
of a message.
The support implements clock management interface. For instance this allows
us to control HDMI pixel clock on ARM Morello Board.
Tested on ARM Morello Board.
Obtained from: CheriBSD
Differential Revision: https://reviews.freebsd.org/D37316
Reviewed by: manu
Sponsored by: UKRI
This subsystem is superseded by modern debugging facilities,
e.g. DTrace probes and TCP black box logging.
We intentionally leave SO_DEBUG in place, as many utilities may
set it on a socket. Also the tcp::debug DTrace probes look at
this flag on a socket.
Reviewed by: gnn, tuexen
Discussed with: rscheff, rrs, jtl
Differential revision: https://reviews.freebsd.org/D37694
After commit fac6dee9eb ("Remove tests for obsolete compilers in the
build system"), we always set -fdebug-prefix-map, so there's no point in
defining and testing _MAP_DEBUG_PREFIX. No functional change intended.
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Sync serial (e.g. T1/T1/G.703) interfaces are obsolete, this driver
includes obfuscated source, and has reported potential security issues.
Differential Revision: https://reviews.freebsd.org/D33468
Sync serial (e.g. T1/T1/G.703) interfaces are obsolete, this driver
includes obfuscated source, and has reported potential security issues.
Differential Revision: https://reviews.freebsd.org/D33467
For the TCP protocol inpcb storage specify allocation size that would
provide space to most of the data a TCP connection needs, embedding
into struct tcpcb several structures, that previously were allocated
separately.
The most import one is the inpcb itself. With embedding we can provide
strong guarantee that with a valid TCP inpcb the tcpcb is always valid
and vice versa. Also we reduce number of allocs/frees per connection.
The embedded inpcb is placed in the beginning of the struct tcpcb,
since in_pcballoc() requires that. However, later we may want to move
it around for cache line efficiency, and this can be done with a little
effort. The new intotcpcb() macro is ready for such move.
The congestion algorithm data, the TCP timers and osd(9) data are
also embedded into tcpcb, and temprorary struct tcpcb_mem goes away.
There was no extra allocation here, but we went through extra pointer
every time we accessed this data.
One interesting side effect is that now TCP data is allocated from
SMR-protected zone. Potentially this allows the TCP stacks or other
TCP related modules to utilize that for their own synchronization.
Large part of the change was done with sed script:
s/tp->ccv->/tp->t_ccv./g
s/tp->ccv/\&tp->t_ccv/g
s/tp->cc_algo/tp->t_cc/g
s/tp->t_timers->tt_/tp->tt_/g
s/CCV\(ccv, osd\)/\&CCV(ccv, t_osd)/g
Dependency side effect is that code that needs to know struct tcpcb
should also know struct inpcb, that added several <netinet/in_pcb.h>.
Differential revision: https://reviews.freebsd.org/D37127
This should be spelt IMGACT_BINMISC to match the filename. The option
name does not appear outside of sys/conf and this module is typically
used via the kernel module imgact_binmisc.ko.
MFC After: 2 weeks
Notable upstream pull request merges:
#13680 Add options to zfs redundant_metadata property
#13758 Allow mounting snapshots in .zfs/snapshot as a regular user
#13838 quota: disable quota check for ZVOL
#13839 quota: extend quota for dataset
#13973 Fix memory leaks in dmu_send()/dmu_send_obj()
#13977 Avoid unnecessary metaslab_check_free calling
#13978 PAM: Fix unchecked return value from zfs_key_config_load()
#13979 Handle possible null pointers from malloc/strdup/strndup()
#13997 zstream: allow decompress to fix metadata for uncompressed
records
#13998 zvol_wait logic may terminate prematurely
#14001 FreeBSD: Fix a pair of bugs in zfs_fhtovp()
#14003 Stop ganging due to past vdev write errors
#14039 Optimize microzaps
#14050 Fix draid2+2s metadata error on simultaneous 2 drive failures
#14062 zed: Avoid core dump if wholedisk property does not exist
#14077 Propagate extent_bytes change to autotrim thread
#14079 FreeBSD: vn_flush_cached_data: observe vnode locking contract
#14093 Fix ARC target collapse when zfs_arc_meta_limit_percent=100
#14106 Add ability to recompress send streams with new compression
algorithm
#14119 Deny receiving into encrypted datasets if the keys are not
loaded
#14120 Fix arc_p aggressive increase
#14129 zed: Prevent special vdev to be replaced by hot spare
#14133 Expose zfs_vdev_open_timeout_ms as a tunable
#14135 FreeBSD: Fix out of bounds read in zfs_ioctl_ozfs_to_legacy()
#14152 Adds the `-p` option to `zfs holds`
#14161 Handle and detect #13709's unlock regression
Obtained from: OpenZFS
OpenZFS commit: 2163cde450
These were originally in locore.S as they are only needed so we have
a valid value to put into the vbar_el2 register. As these will soon
be used by bhyve so move them to a new file as we already have with
the EL1 exception vectors in exception.S.
Obtained from: https://github.com/FreeBSD-UPB/freebsd-src (earlier version)
Sponsored by: Innovate UK
Sponsored by: The FreeBSD Foundation
Work is ongoing to add support for pfsync over IPv6. This required some
changes to allow for differentiating between the two families in a more
generic way.
This patch converts the relevant ioctls to using nvlists, making future
extensions (such as supporting IPv6 addresses) easier.
Sponsored by: InnoGames GmbH
Differential Revision: https://reviews.freebsd.org/D36277
On arm64 with per-thread stack canaries enabled (the PERTHREAD_SSP
option), the compiler may load curthread->td_md.md_canary in function
prologues. This is not safe in data_abort(); see commit 2c10be9e06.
Thus, sanitizer runtimes must also avoid accessing the current thread's
canary.
Since SSP has limited utility in sanitizer runtimes, simply disable it
unconditionally to avoid unpleasant surprises in the future.
MFC after: 2 weeks
Sponsored by: Juniper Networks, Inc.
Sponsored by: Klara, Inc.
Added support for application management interface. There are two types of commands supported:
1. Firmware IOCTLs: These ioctls are meant for firmware
consumption. Driver acts as a transport for these.
2. Driver only IOCTLs: These ioctls are meant for driver
consumption. Driver will serve these ioctls without sending them down
to firmware.
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D36448
Make the dtb/dtbo files with less noise. Remove echo statements, but add
back the call for the non-meta builds to replace the removed noise.
Suggetions by: jrtc27
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D37073
This commit brings back the driver from FreeBSD commit
f187d6dfbf plus subsequent fixes from
upstream.
Relative to upstream this commit includes a few other small fixes such
as additional INET and INET6 #ifdef's, #include cleanups, and updates
for recent API changes in main.
Reviewed by: pauamma, gbe, kevans, emaste
Obtained from: git@git.zx2c4.com:wireguard-freebsd @ 3cc22b2
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D36909
This is only ever used by a FDT specific attachment and calls into
FDT specific functions. Only build it when FDT is in the kernel config.
Sponsored by: The FreeBSD Foundation
This is the last part for ARM64 Hyper-V enablement. This includes
commone files and make file changes to enable the ARM64 FreeBSD
guest on Hyper-V. With this patch, it should be able to build
the ARM64 image and install it on Hyper-V.
Reviewed by: emaste, andrew, whu
Tested by: Souradeep Chakrabarti <schakrabarti@microsoft.com>
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D36744
To simplify management of all the options that should be enabled for the
different architectures, adopt the convention that all options listed in
DEFAULTS will be #defined to 1 in opt_global.h for untied builds. Except
for GEOM_* and ISAPNP, they are all in opt_global.h. ISAPNP is a
opt_dontuse.h, so only filter GEOM_*.
Sponsored by: Netflix
Reviewed by: kevans
Differential Revision: https://reviews.freebsd.org/D37108
Nothing uses ISAPNP today, apart from bringing in files or not. There's
really no need to ever do #ifdef ISAPNP in drivers and such. It means
use the ISA bus plug and play isolation protocol to enumerate the bus,
not the more useful 'you might have devices with isa pnp ids' which all
drivers hide behind DEV_ISA and/or an isa clause in the files files.
Sponsored by: Netflix
Reviewed by: kevans, emaste
Differential Revision: https://reviews.freebsd.org/D37109
New driver to ACPI generic event device, defined in ACPI spec.
Some ACPI power button may not work without this.
In qemu arm64 with "virt" machine, with ACPI firmware,
enable devd check devd message by
and invoke following command in qemu monitor
(qemu) system_powerdown
and make sure some power button input event appear.
(setting sysctl hw.acpi.power_button_state=S5 is not work,
because ACPI tree does not have \_S5 object.)
Reviewed by: andrew, hrs
Differential Revision: https://reviews.freebsd.org/D37032
These are needed for the 'cpu ARM64' and 'cpu RISCV' options in these
architecture's config files. cpu lines are non-optional in config(8), so
we must define them here. There's no other use for them in the tree.
Sponsored by: Netflix
Cleanup another remnant of the armv4/armv5 support. Now that we always
define armv6 or armv7, these lines can be deleted (execpt hwpmc_armv7.c
which now needs just one line). Since we don't do anything different
between armv6 and armv7 from a config file selection point of view,
delete them from options.arm. We are extremely unlikely to grow anything
new here during the remaining lifetime of 32-bit arm in FreeBSD.
Sponsored by: Netflix
Reviewed by: kevans, andrew
Differential Revision: https://reviews.freebsd.org/D37069
Linux has two bugs in its handling of the x86 MP table:
1. It assumes that there is always 640 kB of base memory, and looks for
the MP table in the top kB of this even if the memory map indicates
that memory location does not exist.
2. It ignores that entry_count field and instead iterates through the
MP table by scanning until it runs out of bytes in the table.
The Firecracker VM (and probably other related VMs) relies on both of
these bugs. With the MPTABLE_LINUX_BUG_COMPAT option, we search for
the MP table at address 639k even if that isn't in the memory map; and
replace a zeroed entry_count with a value computed from scanning the
table until we run out of table bytes.
Reviewed by: imp
Sponsored by: https://www.patreon.com/cperciva
Differential Revision: https://reviews.freebsd.org/D35799
On systems without a PCI bus, legacy_pcib_identify by default creates
one anyway:
legacy_pcib_identify: no bridge found, adding pcib0 anyway
This commit adds a kernel option NO_LEGACY_PCIB which disables this,
allowing systems to be fully PCI-free.
Reviewed by: imp
Sponsored by: https://www.patreon.com/cperciva
Differential Revision: https://reviews.freebsd.org/D35798
The Virtio MMIO bus driver was added in 2014 with support for devices
exposed via FDT; in 2018 support was added to discover Virtio MMIO
devices via ACPI tables, as in QEMU. The Firecracker VMM eschews both
FDT and ACPI, instead presenting device information via kernel command
line arguments of the form virtio_mmio.device=<parameters>.
These command line parameters get converted into kernel environment
variables; this adds support for parsing those variables and attaching
virtio_mmio children to nexus.
There is a case to be made that it would be cleaner to have a new
"cmdlinebus" attached to nexus and virtio_mmio children attached to
that. A future commit might do that.
Discussed with: imp, jrtc27
Sponsored by: https://patreon.com/cperciva
Differential Revision: https://reviews.freebsd.org/D36189
DPAA2 is a hardware-level networking architecture found in some NXP
SoCs which contain hardware blocks including Management Complex
(MC, a command interface to manipulate DPAA2 objects), Wire Rate I/O
processor (WRIOP, packets distribution, queuing, drop decisions),
Queues and Buffers Manager (QBMan, Rx/Tx queues control, Rx buffer
pools) and the others.
The Management Complex runs NXP-supplied firmware which provides DPAA2
objects as an abstraction layer over those blocks to simplify an
access to the underlying hardware. Each DPAA2 object has its own
driver (to perform an initialization at least) and will be visible
as a separate device in the device tree.
Two new drivers (dpaa2_mc and dpaa2_rc) act like firmware buses in
order to form a hierarchy of the DPAA2 devices:
acpiX (or simplebusX)
dpaa2_mcX
dpaa2_rcX
dpaa2_mcp0
...
dpaa2_mcpN
dpaa2_bpX
dpaa2_macX
dpaa2_io0
...
dpaa2_ioM
dpaa2_niX
dpaa2_mc is suppossed to be a root of the hierarchy, comes in ACPI
and FDT flavours and implements helper interfaces to allocate and
assign bus resources, MSI and "managed" DPAA2 devices (NXP treats some
of the objects as resources for the other DPAA2 objects to let them
function properly). Almost all of the DPAA2 objects are assigned to
the resource containers (dpaa2_rc) to implement isolation.
The initial implementation focuses on the DPAA2 network interface
to be operational. It is the most complex object in terms of
dependencies which uses I/O objects to transmit/receive packets.
Approved by: bz (mentor)
Tested by: manu, bz
MFC after: 3 months
Differential Revision: https://reviews.freebsd.org/D36638
coresight_cpu_debug only has an FDT attachment, so let's not build it
for kernels without FDT.
coresight.h includes sys/malloc.h via header pollution
dev/ofw/openfirm.h; include it directly in case we're building without
FDT.
Reviewed by: andrew, manu
Differential Revision: https://reviews.freebsd.org/D36789
While we could add the dummy includes directory manually to only the
drivers needing it, it seems a lot easier to simply add it to all
without any expected harm.
This is needed for more drivers (and to remove some #ifdef in current
ones) with empty header files being present not yielding errors.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Reviewed by: hselasky, imp
Differential Revision: https://reviews.freebsd.org/D36684
While for in-kernel we already have LINUXKPI_INCLUDES in kern.pre.mk
for kmod builds we've not had a common define to use leading to various
spellings of include paths.
In order for the include list to be expanded more easily in the future,
e.g., adding the "dummy" includes (for all) and to harmonize code,
duplicate LINUXKPI_INCLUDES to kmod.mk and use it for all module Makefiles.
MFC after: 1 week
Reviewed by: hselasky
Differential Revision: https://reviews.freebsd.org/D36683
Notable upstream pull request merges:
#13725 Fix BLAKE3 tuneable and module loading on Linux and FreeBSD
#13756 FreeBSD: Organize sysctls
#13773 FreeBSD: add kqfilter support for zvol cdev
#13781 Importing from cachefile can trip assertion
#13794 Apply arc_shrink_shift to ARC above arc_c_min
#13798 Improve too large physical ashift handling
#13799 Revert "Avoid panic with recordsize > 128k, raw sending and
no large_blocks"
#13802 Add zfs.sync.snapshot_rename
#13831 zfs_enter rework
#13855 zfs recv hangs if max recordsize is less than received
recordsize
Obtained from: OpenZFS
OpenZFS commit: c629f0bf62
This diff extends LinuxKPI to support simple attribute files in debugfs.
These simple attributes are an essential component for compiling drm-kmod
with CONFIG_DEBUG_FS enabled.
This will allow for easier graphics driver debugging using
Intel's igt-gpu-tools.
Reviewed by: hselasky
Differential Revision: https://reviews.freebsd.org/D35883
Sponsored by: Google, Inc. (GSoC 2022)
This merges TCA6416, TCA6408 drivers and adds PCA9555 support.
They handle 8 pin and 16 pin ICs with basic INPUT/OUTPUT functionality.
The register map is fairly similar so there is no point in having two
separate drivers.
Reviewed by: kd
Obtained from: Semihalf
Differential Revision: https://reviews.freebsd.org/D36559
As all ISA sound card drivers have been removed sndbuf_dma no longer
serves any purpose.
Reviewed by: mav
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D34671
This is a simple RTC present in the PMIC, supporting 1s precision.
This is the PMIC on SiFive's HiFive Unmatched.
Reviewed by: mhorne, imp
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D36200
This is an MFD with regulators, an RTC and a watchdog, among other
things. This adds the necessary infrastructure for specific children to
be added.
Note that the PMIC can also be attached via SPI, not just I2C, and so
the interface is abstracted. No SPI implementation is added, however.
This is the PMIC on SiFive's HiFive Unmatched.
Reviewed by: manu, mhorne
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D36199
This changes the default TCP Congestion Control (CC) to CUBIC.
For small, transactional exchanges (e.g. web objects <15kB), this
will not have a material effect. However, for long duration data
transfers, CUBIC allocates a slightly higher fraction of the
available bandwidth, when competing against NewReno CC.
Reviewed By: tuexen, mav, #transport, guest-ccui, emaste
Relnotes: Yes
Sponsored by: NetApp, Inc.
Differential Revision: https://reviews.freebsd.org/D36537
Summary:
This mirrors the recentish changes to armv8; the ipq4018 port uses
dwc3 + xhci and thus needs this.
Subscribers: imp, andrew
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D36530
Bring in the latest Arm Optimized Routines memcpy/memmove into the
arm64 kernel. As these functions have been merged in the current
version remove the now unneeded memmove.S.
Sponsored by: The FreeBSD Foundation
Although originally socket was intended to use with ipfw(4) only, now
it also can be used with pf(4). On a kernel without packet filters,
it still can be used to inject traffic.
After commit 840327e5dd ("mbuf: Don't support PAGE_SIZE < 4K"), these
defaults were causing LINT kernel builds to fail.
Reported by: Jenkins
MFC after: 1 week
Changes since 1.26.6.0 are listed here. This list comes from the
Release Notes for "Chelsio Unified Wire 3.17.0.0 for Linux" dated
2022-07-29.
Fixes
-----
BASE:
- Enabled all MA parity interrupt bits.
- Use config file value to override number of rx channel. nrxch=1 was not
handled in the firmware.
- Replaced read only registers with new registers EDC_H_BIST_USER_WDATA0,
EDC_H_BIST_USER_WDATA1 and EDC_H_BIST_CMD_LEN to dump the uP memory parity
error status registers.
- 10G simplex module support enabled.
Obtained from: Chelsio Communications
MFC after: 1 month
Sponsored by: Chelsio Communications
It does not work with ULE, which is the default scheduler for over a
decade.
Reviewed by: emaste, kib
Differential Revision: https://reviews.freebsd.org/D36094
Currently, subr_bus.c shares logic for (a) maintaining all HW devices
(e.g. discovery/attach/detach logic) and (b) generic devctl notification
layer for devices/PMU/GEOM/interfaces/etc).
These two subsystems share really tiny interaction interface, composed of 3
notification functions. With that in mind, move devctl layer to a
separate file, establishing a clear notification interface between the
sub.c bus layer and the provider (devctl).
The primary driver of this change is netlink implementation (D36002).
The idea is to propagate device-level events to netlink as well, so all
netlink customers can subscribe to these changes.
The long-term goal is to deprecate devctl and to use netlink as the
kernel<> userland transport provided netlink gets enough traction.
Reviewed by: imp, markj
Differential Revision: https://reviews.freebsd.org/D36091
MFC after: 1 month
route_ctl.c size has grown considerably since initial introduction.
Factor out non-relevant parts:
* all rtentry logic, such as creation/destruction and accessors
goes to net/route/route_rtentry.c
* all rtable subscription logic goes to net/route/route_subscription.c
Differential Revision: https://reviews.freebsd.org/D36074
MFC after: 1 month
This change adds public KPI to work with routes using pre-created
nexthops, instead of using data from addrinfo structures. These
functions will be later used for adding/deleting kernel-originated
routes and upcoming netlink protocol.
As a part of providing this KPI, low-level route addition code has been
reworked to provide more control over route creation or change.
Specifically, a number of operation flags
(RTM_F_<CREATE|EXCL|REPLACE|APPEND>) have been added, defining the
desired behaviour the the route already exists (or not exists). This
change required some changes in the multipath addition code, resulting
in moving this code to route_ctl.c, rendering mpath_ctl.c empty.
Differential Revision: https://reviews.freebsd.org/D36073
MFC after: 1 month
This driver supports the auto negotiation mode between the copper and fiber
ports.
This PHY has two independent PHYs (one for copper and other for fiber) but in
this case the functionality is presented as a single PHY for easy management.
Sponsored by: Rubicon Communications, LLC ("Netgate")
A replacement QAT driver will be imported, but this replacement does not
support Atom C2xxx hardware. So, the existing driver will be kept
around to provide opencrypto offload support for those chipsets.
Reviewed by: pauamma, emaste
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D35817
With clang 15, the following -Werror warning is produced:
sys/contrib/openzfs/module/zfs/zfs_fm.c:256:6: error: variable 'cnt' set but not used [-Werror,-Wunused-but-set-variable]
int cnt = 0;
^
The 'cnt' variable does not seem to be used for anything, but since this
is contributed code, suppress the warning instead.
MFC after: 3 days
Clang 15 is more strict about function definitions not matching
declarations, and zlib has a lot of these, but since it is contributed
code (and in K&R style to boot), suppress those warnings instead.
MFC after: 3 days
With clang 15, the following -Werror warning is produced:
sys/contrib/dev/acpica/components/namespace/nsaccess.c:452:29: error: variable 'NumCarats' set but not used [-Werror,-Wunused-but-set-variable]
UINT32 NumCarats;
^
Here, 'NumCarats' is a variable that is only used when debugging. Since
acpica is contributed code, suppress the warning with a compile flag.
MFC after: 3 days
Generally, access to the kernel debugger is considered to be unsafe from
a security perspective since it presents an unrestricted interface to
inspect or modify the system state, including sensitive data such as
signing keys.
However, having some access to debugger functionality on production
systems may be useful in determining the cause of a panic or hang.
Therefore, it is desirable to have an optional policy which allows
limited use of ddb(4) while disabling the functionality which could
reveal system secrets.
This loadable MAC module allows for the use of some ddb(4) commands
while preventing the execution of others. The commands have been broadly
grouped into three categories:
- Those which are 'safe' and will not emit sensitive data (e.g. trace).
Generally, these commands are deterministic and don't accept
arguments.
- Those which are definitively unsafe (e.g. examine <addr>, search
<addr> <value>)
- Commands which may be safe to execute depending on the arguments
provided (e.g. show thread <addr>).
Safe commands have been flagged as such with the DB_CMD_MEMSAFE flag.
Commands requiring extra validation can provide a function to do so.
For example, 'show thread <addr>' can be used as long as addr can be
checked against the system's list of process structures.
The policy also prevents debugger backends other than ddb(4) from
executing, for example gdb(4).
Reviewed by: markj, pauamma_gundo.com (manpages)
Sponsored by: Juniper Networks, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D35371
Add three simple hooks to the debugger allowing for a loaded MAC policy
to intervene if desired:
1. Before invoking the kdb backend
2. Before ddb command registration
3. Before ddb command execution
We extend struct db_command with a private pointer and two flag bits
reserved for policy use.
Reviewed by: markj
Sponsored by: Juniper Networks, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D35370
It's unused now. Keep the OBJ_DEFAULT identifier, but make it an alias
of OBJT_SWAP for the benefit of out-of-tree code.
Reviewed by: alc, imp, kib
Tested by: pho
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D35790
Add an option to enable/disable DTrace without disabling ZFS. New
architectures such as CHERI may support ZFS before they support DTrace
and the old model of WITHOUT_CDDL disabling both wasn't helpful.
For compatiblity, the CDDL option remains and WITHOUT_CDDL implies
WITHOUT_DTRACE. WITHOUT_DTRACE also implies WITHOUT_CTF.
As part of this change, largely convert cddl/*/Makefile to using the
more compact SUBDIR.${MK_<FOO>}+= form rather than using intermediate
variables.
Reviewed by: markj
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D35718
Split the current FDT-only implementation up into an FDT and an
ACPI part reusing and sharing as much code as possible (thanks mw!).
This makes the Synopsis XHCI root hubs attach correctly on SolidRun's
HoenyComb instead of just the generic XHCI root and this means we
are also doing proper chip setup and applying the quirk needed there [1].
There is one problem with ACPI attachment in that it uses the generic
XHCI PNP ID. So we need to do extra checks in order to not claim
all xhci, which means we check for a known quirk to be present
in acpi_probe. Long term this isn't scaling and this was discussed
in SolidRun's Discord Channel in 2021 with the intend that "jnettlet"
will take this to a steering committee. Since then ACPI has kind-of
become a technology non grata (due to not getting changes into Linux
timely) so it is unclear if this will ever happen. If there will be
further hardware with dwc3/ACPI we should go and make sure this problem
gets solved.
[1] 24698f90b7/Silicon/NXP/LX2160A/AcpiTables/Dsdt/Usb.asl
Reviewed by: manu, mw
MFC after: 10 days
Differential Revision: https://reviews.freebsd.org/D32256
The two implementations for the pca9548 switch and the pca9547 mux
seemed close enough so we can put them together and with a bit more
abstraction add pca9540 support.
While here apply a bit of consistency in variable and driver naming and
use device_has_property instead of the FDT-only OF_ variant.
This disconnects pca9547 from the build but does not yet delete it.
MFC after: 2 weeks
Reviewed by: mmel (earlier version), avg
Differential Revision: https://reviews.freebsd.org/D35701
Add a driver for NXP LS1088a clockgen support which passes
configuration information to QorIQ clockgen class.
The implementaiton started off as copy of ls1028 support and was
adjusted accordingly.
Reviewed by: dgr_semihalf.com (earlier), mmel
MFC after: 1 week
Sponsored by: Traverse Technologies (providing Ten64 HW for testing)
Differential Revision: https://reviews.freebsd.org/D35617
OpenVPN Data Channel Offload (DCO) moves OpenVPN data plane processing
(i.e. tunneling and cryptography) into the kernel, rather than using tap
devices.
This avoids significant copying and context switching overhead between
kernel and user space and improves OpenVPN throughput.
In my test setup throughput improved from around 660Mbit/s to around
2Gbit/s.
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D34340
Fix builds after 1459a22787 and
59191f3573 by using __diagused
for variables only used in KASSERT().
In addition remove two debug lines that look like a copy and paste error
from dmc620 to cmn600.
Further add the newly introduced files to sys/confg/files.arm64 as well
so that LINT compiles without missing symbols.
Remove -mgeneral-regs-only when building the arm64 blake3 code. It
uses simd instructions so will use non-general purpose registers.
Sponsored by: The FreeBSD Foundation
Along with the snd_sb8 and snd_sb16 drivers. They supported ISA
Creative Sound Blaster and compatible sound cards.
Note that isa/sb.h is not removed, as it is still used by some PCI
sound card drivers.
ISA sound card drivers are deprecated as discussed on the current[1] and
stable[2] mailing lists. Deprecation notices were added in e39ec8933b
and MFCd to stable branches.
Driver removals are being committed individually so that specific
drivers can be restored if necessary (either in FreeBSD or by downstream
projects).
[1] https://lists.freebsd.org/archives/freebsd-current/2022-March/001680.html
[2] https://lists.freebsd.org/archives/freebsd-stable/2022-March/000585.html
Reviewed by: mav
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D34671
Commit acfb506b3d replaced an exit 0 when using -V with a return
instead. FreeBSD's sh treats a return outside of a function like
exit, but this is a non-portable extension. Other Bourne shells only
permit return to be used within a function and continue execution
(possibly with a warning).
To fix, don't reuse VARS_ONLY (which is intended to be set by other
scripts before sourcing newvers.sh directly) and instead use a new
variable (VARS_ONLY_EXIT) to restore the use of exit for the
non-sourced case.
Reviewed by: emaste
Obtained from: CheriBSD
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D35481
'@' is not a valid character in symbol names and can sometimes appear
in path names.
Reviewed by: imp, markj
Obtained from: CheriBSD
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D35480
By creating an i386 symlink, this allows code compiled with -m32 to
build (32-bit vdso and linux bits) when -m32 support requires files
in the i386 hierarchy.
Reviewed by: jhb, imp
Prior to 9b6edf364e WITHOUT_KERNEL_SYMBOLS split kernel debug data
into standalone debug files at build time, but did not install those
files. As of 9b6edf364e it stopped splitting the debug data, leaving
it in the kernel and modules (the default kernel configs include
DEBUG=-g).
Revert 9b6edf364e and introduce a new build-time SPLIT_KERNEL_DEBUG
knob, as some people rely on the pre-9b6edf364eb0 WITHOUT_KERNEL_SYMBOLS
behaviour and that was imp's original intent.
PR: 264433
Reviewed by: eugen, imp
MFC after: 3 weeks
Relnotes: yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D35437
This module depends on the presence of both INET and INET6 options in
order to compile.
Reviewed by: erj
Fixes: cdcd52d41e ("irdma: Add RDMA driver for Intel(R) Ethernet...")
Differential Revision: https://reviews.freebsd.org/D35343
This is an initial commit for RDMA FreeBSD driver for Intel(R) Ethernet
Controller E810, called irdma. Supporting both RoCEv2 and iWARP
protocols in per-PF manner, RoCEv2 being the default.
Testing has been done using krping tool, perftest, ucmatose, rping,
ud_pingpong, rc_pingpong and others.
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Reviewed by: #manpages (pauamma_gundo.com) [documentation]
MFC after: 1 week
Relnotes: yes
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D34690
This allows the "irdma" driver to communicate with the ice(4)
driver to allow it access to the underlying device's hardware
resources as well as synchronize access to shared resources.
This interface already existed in the standalone out-of-tree
1.34.2 driver; this commit adds and enables it in the in-kernel
driver.
Note:
Adds hack to module Makefile to compile interface/.m files
These are required for the RDMA client interface, but they don't
build as-is like the normal .c files. The source directory doesn't
seem to be included by default, so add lines that specifically
add them as libraries so that ice_rdma.h can be found and the
interface files will compile.
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
MFC after: 1 week
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D30889
As with atomic(9) use the ARMv8.1 Large System Extension atomic
instructions to implement the userspace compare and swap functions.
Reviewed by: kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D35234
Since 0b3178a45c we have added '-d' to the link command line for
kernel modules, so if any unexpected common symbols turn up (even though
we use -fno-common in CFLAGS), storage will be allocated in in the
module itself.
However, with lld this option did not have any effect since ~2017, and
as of lld 14 it warns: "-d, -dc, -dp, and --[no-]define-common will be
removed. See https://github.com/llvm/llvm-project/issues/53660"
Add a linker type and version check, to avoid adding the option for lld
14 and later.
Reported by: bz
MFC after: 2 weeks
This option was never enabled in GENERIC and does not appear to work
(the cdevsw is stored in a global array but never passed to make_dev
to be associated with a character device).
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D35008
make tinderbox now passes with this warning enabled as a fatal error,
so revert the change to hide it in preparation for making it fatal.
This reverts commit e8e691983b.
Reviewed by: imp, emaste
Differential Revision: https://reviews.freebsd.org/D34948
When FreeBSD is running as dom0 (initial domain) on a Xen system it
has access to the native ACPI tables and is the OSPM. However the
hypervisor is the entity in charge of the CPU idle and frequency
states, and in order to perform this duty it requires information
found the ACPI dynamic tables that can only be parsed by the OSPM.
Introduce a new Xen specific ACPI driver to fetch the Processor
related information and upload it to Xen. Note that this driver needs
to take precedence over the generic ACPI CPU driver when running as
dom0, so downgrade the probe score of the native driver to
BUS_PROBE_DEFAULT in order for the Xen specific driver to use
BUS_PROBE_SPECIFIC.
Tested on an Intel NUC to successfully parse and upload both the Cx and
Px states to Xen.
Sponsored by: Citrix Systems R&D
Reviewed by: jhb kib
Differential revision: https://reviews.freebsd.org/D34841
Use -Wno-unused-but-set-variable for kernel builds with clang13.
To turn this warning back on, set the following in src.conf:
WITH_SET_BUT_NOTUSED_KERNEL_WARNINGS=
Reviewed by: mjg, imp
Differential Revision: https://reviews.freebsd.org/D34784
This dumper can instantiate and write the dump's contents to a
file-backed vnode.
Unlike existing disk or network dumpers, the vnode dumper should not be
invoked during a system panic, and therefore is not added to the global
dumper_configs list. Instead, the vnode dumper is constructed ad-hoc
when a live dump is requested using the new ioctl on /dev/mem. This is
similar in spirit to a kgdb session against the live system via
/dev/mem.
As described briefly in the mem(4) man page, live dumps are not
guaranteed to result in a usuable output file, but offer some debugging
value where forcefully panicing a system to dump its memory is not
desirable/feasible.
A future change to savecore(8) will add an option to save a live dump.
Reviewed by: markj, Pau Amma <pauamma@gundo.com> (manpages)
Discussed with: kib
MFC after: 3 weeks
Sponsored by: Juniper Networks, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D33813
- Adds FW logging support
- Once enabled, this lets the firmware print event and error messages
to the log, increasing the visibility into what the hardware is
doing; this is useful for debugging
- General bug fixes
- Adds inital DCB support to the driver
- Notably, this adds support for DCBX to the driver; now with the
fw_lldp sysctl set to 1, the driver and adapter will adopt a DCBX
configuration sent from a link partner
- Adds statistcs sysctls for priority flow control frames
- Adds new configuration sysctls for DCB-related features: (VLAN) user
priority to TC mapping; ETS bandwidth allocation; priority flow
control
- Remove unused SR-IOV files (until support gets added)
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Tested by: jeffrey.e.pieper@intel.com
MFC after: 3 days
MFC with: 213e91399b, e438f0a975
Relnotes: yes
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D34024
Define NO_WUNUSED_BUT_SET_VARIABLE for newer clang, and use it in ATH_C
to account for different clang versions. Use it in Makefiles as well.
Sponsored by: Netflix
Reviewed by: kevans, jhb
Differential Revision: https://reviews.freebsd.org/D34408
The ath driver has a lot of these warnings. It's an older driver, so
just supress these warnings until they can be fixed. They are a mix of
simple dead stores, debubgging output and stuff that would require
careful study to know if its safe to remove the access or not (there are
likely very few of the latter, but if there are any they are latent bugs
that compiler could optimize away). Since I have no ath hardware to test
on anymore, take the conservative approach.
Sponsored by: Netflix
The gunion(8) utility is used to track changes to a read-only disk on
a writable disk. Logically, a writable disk is placed over a read-only
disk. Write requests are intercepted and stored on the writable
disk. Read requests are first checked to see if they have been
written on the top (writable disk) and if found are returned. If
they have not been written on the top disk, then they are read from
the lower disk.
The gunion(8) utility can be especially useful if you have a large
disk with a corrupted filesystem that you are unsure of how to
repair. You can use gunion(8) to place another disk over the corrupted
disk and then attempt to repair the filesystem. If the repair fails,
you can revert all the changes in the upper disk and be back to the
unchanged state of the lower disk thus allowing you to try another
approach to repairing it. If the repair is successful you can commit
all the writes recorded on the top disk to the lower disk.
Another use of the gunion(8) utility is to try out upgrades to your
system. Place the upper disk over the disk holding your filesystem
that is to be upgraded and then run the upgrade on it. If it works,
commit it; if it fails, revert the upgrade.
Further details can be found in the gunion(8) manual page.
Reviewed by: Chuck Silvers, kib (earlier version)
tested by: Peter Holm
Differential Revision: https://reviews.freebsd.org/D32697
Boottrace is a facility for capturing trace events during boot and
shutdown. This includes kernel initialization, as well as rc. It has
been used by NetApp internally for several years, for catching and
diagnosing slow devices or subsystems. It is driven from userspace by
sysctl interface, and the output is a human-readable log of events
(kern.boottrace.log).
This commit adds the core boottrace functionality implementing these
interfaces. Adding the trace annotations themselves to kernel and
userland will happen in follow-up commits. A future commit will also add
a boottrace(4) man page.
For now, boottrace is unconditionally compiled into the kernel but
disabled by default. It can be enabled by setting the
kern.boottrace.enabled tunable to 1 in loader.conf(5).
There is an existing boot-time event tracing facility, which can be
compiled into the kernel with 'options TSLOG'. While there is some
functional overlap between this and boottrace, they are distinct. TSLOG
is suitable for generating detailed timing information and flamegraphs,
and has been used to great success by cperciva@ to diagnose and reduce
the overall system boot time. Boottrace aims to more quickly provide an
overview of timing and resource usage of the boot (and shutdown) process
to a sysadmin who requires this knowledge.
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
X-NetApp-PR: #23
Differential Revision: https://reviews.freebsd.org/D30184
mmc_helper have an hard dependency on gpio_if.h
gpio(4) isn't in the default x86 kernel and none of the x86
sd/mmc drivers uses mmc_helper so just add a dependency on gpio.
Fixes: 85b3794cee ("files: Make ext_resources non-optional")
EXT_RESOURCES have been introduced in 12-CURRENT and all supported
releases have it enabled in their kernel config.
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D33834
Some IIC multifunction devices may have multiple I2C addresses per chip, but
only the primary address is listed in the DT (e.g. MAX776200). In this case,
the sub-devices for the secondary addresses must be created manually with
fixed OFW parameters (node, name, compatibility string, IIC address).
Add a bus method to the ofw_iicbus interface that does this.
MFC after: 4 weeks
Deleting hack.c cause the kernel to always be out of date:
$ make kernel
make: /usr/src/sys/amd64/compile/GENERIC/.depend.hack.pico, 1:
ignoring stale .depend for hack.c
:> hack.c
cc -shared -O2 -pipe ... -nostdlib hack.c -o hack.pico
rm -f hack.c
MAKE="make" sh ../../../conf/newvers.sh "-R" GENERIC
cc -c -O2 -pipe ... -std=iso9899:1999 -Werror vers.c
ctfconvert -L VERSION -g vers.o
linking kernel.full
Keeping hack.c in the compile directory causes no harm,
so there's no reason to delete it.
Also rename the file to "force-dyamic-hack.c" so it is
clear what the hack is aboug.
Reviewed by: sjg
Differential Revision: https://reviews.freebsd.org/D34281
GCC is more pedantic than clang about warning when a function doesn't
handle undefined enum values (see GCC bug 87950). Clang's warning
gives a more pragmatic coverage and should find any real bugs, so
disable the warning for GCC rather than adding __unreachable
annotations to appease GCC.
Reviewed by: imp, emaste
Differential Revision: https://reviews.freebsd.org/D34147
Parts of zstd, used in openzfs and other places, trigger a new clang 14
-Werror warning:
```
sys/contrib/zstd/lib/decompress/huf_decompress.c:889:25: error: use of bitwise '&' with boolean operands [-Werror,-Wbitwise-instead-of-logical]
(BIT_reloadDStreamFast(&bitD1) == BIT_DStream_unfinished)
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
```
While the warning is benign, it should ideally be fixed upstream and
then vendor-imported, but for now silence it selectively.
MFC after: 3 days
clang doesn't implement it, and Linux doesn't enforce it. As a
result, new instances keep cropping up both in FreeBSD's code and in
upstream sources from vendors.
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D34144
Reduce the burden to maintain correct and
extensible ECN related code across multiple
stacks and codepaths.
Formally no functional change.
Incidentially this establishes correct
ECN operation in one instance.
Reviewed By: rrs, #transport
Sponsored by: NetApp, Inc.
Differential Revision: https://reviews.freebsd.org/D34162
Reduce the burden to maintain correct and
extensible ECN related code across multiple
stacks and codepaths.
Formally no functional change.
Incidentially this establishes correct
ECN operation in one instance.
Reviewed By: rrs, #transport
Sponsored by: NetApp, Inc.
Differential Revision: https://reviews.freebsd.org/D34162
TLS RX support is modeled after TLS TX support. The basic structures and layouts
are almost identical, except that the send tag created filters RX traffic and
not TX traffic.
The TLS RX tag keeps track of past TLS records up to a certain limit,
approximately 1 Gbyte of TCP data. TLS records of same length are joined
into a single database record.
Regularly the HW is queried for TLS RX progress information. The TCP sequence
number gotten from the HW is then matches against the database of TLS TCP
sequence number records and lengths. If a match is found a static params WQE
is queued on the IQ and the hardware should immediately resume decrypting TLS
data until the next non-sequential TCP packet arrives.
Offloading TLS RX data is supported for untagged, prio-tagged, and
regular VLAN traffic.
MFC after: 1 week
Sponsored by: NVIDIA Networking
This change adds convenience functions to setup a flow steering rule based on
a TCP socket. The helper function gets all the address information from the
socket and returns a steering rule, to be used with HW TLS RX offload.
MFC after: 1 week
Sponsored by: NVIDIA Networking
Internal send queues are regular sendqueues which are reserved for WQE commands
towards the hardware and firmware. These queues typically carry resync
information for ongoing TLS RX connections and when changing schedule queues
for rate limited connections.
The internal queue, IQ, code is more or less a stripped down copy
of the existing SQ managing code with exception of:
1) An optional single segment memory buffer which can be read or
written as a whole by the hardware, may be provided.
2) An optional completion callback for all transmit operations, may
be provided.
3) Does not support mbufs.
MFC after: 1 week
Sponsored by: NVIDIA Networking
Add i2c support to linuxkpi. This is needed by drm-kmod.
For every i2c_adapter added by i2c_add_adapter we add a child to the
device named "lkpi_iic". This child handle the conversion between
Linux i2c_msgs to FreeBSD iic_msgs.
For every i2c_adapter added by i2c_bit_add_bus we add a child to the
device named "lkpi_iicbb". This child handle the conversion between
Linux i2c_msgs to FreeBSD iic_msgs.
With the help of iic(4), this expose the i2c controller to userspace
allowing a user to query DDC information from a monitor.
e.g.: i2c -f /dev/iic0 -a 0x28 -c 128 -d r
will query the standard EDID from the monitor if plugged.
The bitbang part (lkpi_iicbb) isn't tested at all for now as I don't have
compatible hardware (all my hardware have native i2c controller).
Tested on: Intel (SandyBridge, Skylake, ApolloLake)
Tested on: AMD (Picasso, Polaris (amd64 and arm64))
MFC after: 1 month
Reviewed by: hselasky
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33053
This is intended to be used with forthcoming ice(4) driver version 1.34.2.
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Sponsored by: Intel Corporation
options IPSEC is already documented as requiring 'device crypto' and
duplicating the dependencies is harder to read and not always
consistent.
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D33990
This adds a wrapper around libsodium's curve25519 support matching
Linux's curve25519 API. The intended use case for this is WireGuard.
Note that this is not integrated with OCF as it is not related to
symmetric operations on data.
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D33935
These ciphers are now supported via OCF or 'struct enc_xform'.
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D33889
This is a synchronous software API which wraps the existing software
implementation shared with OCF. Note that this will not currently
use optimized backends (such as ossl(4)) but may be appropriate for
operations on small buffers.
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D33524
All supported Xen instances by FreeBSD provide a local APIC
implementation, so there's no need to replace the native local APIC
implementation anymore.
Leave just the ipi_vectored hook in order to be able to override it
with an implementation based on event channels if the underlying local
APIC is not virtualized by hardware. Note the hook cannot use ifuncs,
because at the point where ifuncs are resolved the kernel doesn't yet
know whether it will benefit from using the optimization.
Sponsored by: Citrix Systems R&D
Reviewed by: kib
Differential revision: https://reviews.freebsd.org/D33917
Prior to this commit, the TSC and local APIC frequencies were calibrated
at boot time by measuring the clocks before and after a one-second sleep.
This was simple and effective, but had the disadvantage of *requiring a
one-second sleep*.
Rather than making two clock measurements (before and after sleeping) we
now perform many measurements; and rather than simply subtracting the
starting count from the ending count, we calculate a best-fit regression
between the target clock and the reference clock (for which the current
best available timecounter is used). While we do this, we keep track
of an estimate of the uncertainty in the regression slope (aka. the ratio
of clock speeds), and stop measuring when we believe the uncertainty is
less than 1 PPM.
In order to avoid the risk of aliasing resulting from the data-gathering
loop synchronizing with (a multiple of) the frequency of the reference
clock, we add some additional spinning depending upon the iteration number.
For numerical stability and simplicity of implementation, we make use of
floating-point arithmetic for the statistical calculations.
On the author's Dell laptop, this reduces the time spent in calibration
from 2000 ms to 29 ms; on an EC2 c5.xlarge instance, it is reduced from
2000 ms to 2.5 ms.
Reviewed by: bde (previous version), kib
MFC after: 1 month
Sponsored by: https://www.patreon.com/cperciva
Differential Revision: https://reviews.freebsd.org/D33802
Pointer authentication allows userspace to add instructions to insert
a Pointer Authentication Code (PAC) into a register based on an address
and modifier and check if the PAC is correct. If the check fails it will
either return an invalid address or fault to the kernel.
As many of these instructions are a NOP when disabled and in earlier
revisions of the architecture this can be used, for example, to sign
the return address before pushing it to the stack making Return-oriented
programming (ROP) attack more difficult on hardware that supports them.
The kernel manages five 128 bit signing keys: 2 instruction keys, 2 data
keys, and a generic key. The instructions then use one of these when
signing the registers. Instructions that use the first four store the
PAC in the register being signed, however the instructions that use the
generic key store the PAC in a separate register.
Currently all userspace threads share all the keys within a process
with a new set of userspace keys being generated when executing a new
process. This means a forked child will share its keys with its parent
until it calls an appropriate exec system call.
In the kernel we allow the use of one of the instruction keys, the ia
key. This will be used to sign return addresses in function calls.
Unlike userspace each kernel thread has its own randomly generated.
Thread0 has a static key as does the early code on secondary CPUs.
This should be safe as there is minimal user interaction with these
threads, however we could generate random keys when the Armv8.5
Random number generation instructions are present.
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D31261
For consistancy with the kernel linker script also use ${MACHINE} for
finding the kernel module linker script. As we currently only use this
for amd64 and i386 this is a no-op, but I'm planning on using this with
arm64 where ${MACHINE} != ${MACHINE_ARCH}.
Reviewed by: markj, kib, imp
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D33841
Add driver for Marvell, Armada-37xx peripheral clock.
Register clocks for various peripheral devices in
north bridge or south bridge domain. Dump clock's
domain while verbose boot.
Reviewed by:
Obtained from: Semihalf
Differential revision: https://reviews.freebsd.org/D32294
Driver for tbg clocks. Read reference frequency from parent
and modify it depending on parameters read from register.
Reviewed by: manu
Obtained from: Semihalf
Differential revision: https://reviews.freebsd.org/D32293
Driver registers new clock device. Clock frequency is set depending
on tenth bit's value obtained from syscon register. Full information
about the clock is dumped if bootverbose is enabled.
Driver was tested on EspressoBin.
Reviewed by: manu
Obtained from: Semihalf
Differential revision: https://reviews.freebsd.org/D32292
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
CHANGES
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Version : 1.26.6.0
Date : 01/03/2022
================================================================================
Fixes
-----
BASE:
- Fixed one module eeprom read failure.
- Fixed an issue with speed selection when 40G and 25G are advertised and
supported.
- Fixed a random traffic hang when T5 receives invalid ets BW in dcbx
messages from a switch.
- Fixed very long link up time with few switches.
================================================================================
Obtained from: Chelsio Communications
MFC after: 2 weeks
Sponsored by: Chelsio Communications
Expand on the terse comments for where each of these files is used.
Reviewed by: emaste
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D33716
Remove sys/mips as the next step of decomissioning mips from the tree.
Remove mips special cases from the kernel make files. Remove the mips
specific linker scripts.
Sponsored by: Netflix
Add 802.11 compat code for mac80211 and to a minimal degree cfg80211.
This allows us to compile and use basic functionality of wireless
drivers such as iwlwifi.
This is a constant work in progress but having it in the tree will
allow others to test and more easy to track changes and avoid having
snapshots no longer applying to branches.
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Import a netdevice update complementing the last remaining bits of
the old ifnet derived implementation. Along add a (for now) task
based NAPI implementation.
This is the minimal set of chnages which are needed for the initial
support of wireless drivers. The NAPI implementation has an option to
still switch to "direct dispatch" as it had been used by these drivers
before not relying on a deferred context along with some printf tracing.
This has been helpful in the last weeks for debugging and will be
cleaned once we have had broader testing and are sure this is fine as-is.
Should we need a more time-sensitive or load-sensitive response
in the future we can always switch to something more sophisticated.
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
X-Differential Revision: D33075 (abandoned without feedback a while ago)
This is a work-in-progress implementation of sk_buff compat code
used for wireless drivers only currently.
Bring in this version of the code as it has proven to be good enough
to have packets going for a few months.
The current implementation has several drawbacks including the need
for us to copy data between sk_buffs and mbufs.
Do not rely on the internals of this implementation. They are highly
likely to change as we will improve the integration to FreeBSD mbufs.
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
readelf is not a bootstrap tool and so cannot be relied upon to exist.
On macOS there is no system readelf, and even on Linux or FreeBSD where
it does exist, BUILD_WITH_STRICT_TMPPATH builds won't be able to use it.
Instead of making it a bootstrap tool, just use nm as that suffices and
already is a bootstrap tool.
Fixes: 28482babd0 ("arm64: Use new arm_kernel_boothdr script for generating booti images.")
Reviewed by: emaste, mmel
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D32734
This will be used by the vdso signal trampoline on arm64.
While here fix the license as this part of locore.S to correct the
copyright owner.
Sponsored by: The FreeBSD Foundation
Summary:
Disable timebase on (some) AIM platforms (tested on PowerMac G4) prior
to synchronization.
Some platforms use a GPIO to enable and disable timebase, while others
use a platform function.
This mirrors 0d69f00b on mpc85xx.
Todo:
* Implement various G5 timebase controls.
* Print out platform code on unknown G5s so we can collect it.
* Change API to be give/take pairs like Linux does so it's possible to
do a software sync protocol.
Reviewed By: #powerpc, jhibbits
Subscribers: mikael, markmi_dsl-only.net, luporl, alfredo
Tags: #powerpc
Differential Revision: https://reviews.freebsd.org/D29136
Through fixes and improvements our ipfilter sources have diverged
enough to warrant move from contrib into sys/netpil. Now that I'm
planning on implementing MSS clamping as in iptables it makes more
sense to move ipfilter to netpfil.
This is the first of three commits the ipfilter move.
Suggested by glebius on two occaions.
Suggested by and discussed with: glebius
Reviewed by: glebius, kp (for #network)
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D33510
This forces everything to be regenerated by marking makesyscalls.lua
as .PHONY, which may be helpful in, e.g., rebase scenarios, which may
have unexpected effects on mtimes but still really need a regen.
For now we apply this to the default sysent target, which is ran
manually and not as a part of buildkernel. We can reconsider this if
someone manually running it has issues with the runtime, but the top
level sysent target can run each in parallel; I recommend -j4 or so.
Requested by: kib
Reviewed by: brooks, kib (both earlier version)
Differential Revision: https://reviews.freebsd.org/D33357
Remove more of the pccard infrasturcture. CardBus Yenta driver (cbb)
still references the remaining bits. It needs some additiona work to
remove 16-bit support still, so it remains.
Sponsored by: Netflix
(Rest is from the README that came with the firmware)
Version : 1.26.4.0
Date : 12/02/2021
Fixes
-----
BASE:
- Fixed error on setting 25G speed on 100G copper with multiple FEC set in
firmware commands.
- Handle link of unknown optics modules by enabling module tx unconditionally.
- Fixed link not coming up for 25G CRS phys. Firmware incorrectly tried to
bring up the link in RS-FEC but as per IEEE spec, it must be BASER FEC.
- Fixed an issue where firmware doesn't automatically retry next FEC if driver
asks to bring up the link using RS-FEC and link doesn't come up.
Obtained from: Chelsio Communications
MFC after: 1 month
Sponsored by: Chelsio Communications
Not doing so results in ctfconvert failing with
ERROR: ctfconvert: elf-vdso.so.o doesn't have type data to convert
On FreeBSD this is non-fatal, since the ctf tools have a hack to make
such errors not fail the build and instead just silently continue
without CTF data (which is a bad idea these days and should probably be
removed; they date back to the original import). However, those are
under #ifdef __FreeBSD__ so do not apply when cross-building from
non-FreeBSD, causing the build to fail.
Fix this by forwarding DEBUG on to the compiler invocation for the VDSO
wrapper. It's assembly so it's not hugely useful, but there is a
non-zero amount of information preserved, and other assembly files are
built with -g by default too so this matches them; the alternative would
be to tag the files.amd64 entries with no-ctfmerge. Note that the VDSO
itself is still compiled without debug info, this only affects the
wrapper linked into the kernel.
Fixes: 98c8b62524 ("vdso for ia32 on amd64"), ab4524b3d7 ("amd64: wrap 64bit sigtramp into vdso")
MFC after: 1 month
a.out.ko is useless without COMPAT_FREEBSD32, and since vdso support was
added, it requires a header built during depend phase, from the COMPAT
option.
Reported by: glebius
Reviewed by: emaste, markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D33311
Also zs(4) and sab(4), which have similarly been removed.
Reviewed by: imp, jhb, emaste
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D33279
This is a MAC policy module that grants scheduling privileges based on
group membership. Users or processes in the group realtime (gid 47) are
allowed to run threads and processes with realtime scheduling priority.
For timing-sensitive, low-latency software like audio/jack, running with
realtime priority helps to avoid stutter and gaps.
PR: 239125
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D33191
This reverts commit 266f97b5e9, reversing
changes made to a10253cffe.
A mismerge of a merge to catch up to main resulted in files being
committed which should not have been.
With upcoming changes to the inpcb synchronisation it is going to be
broken. Even its current status after the move of PCB synchronization
to the network epoch is very questionable.
This experimental feature was sponsored by Juniper but ended never to
be used in Juniper and doesn't exist in their source tree [sjg@, stevek@,
jtl@]. In the past (AFAIK, pre-epoch times) it was tried out at Netflix
[gallatin@, rrs@] with no positive result and at Yandex [ae@, melifaro@].
I'm up to resurrecting it back if there is any interest from anybody.
Reviewed by: rrs
Differential revision: https://reviews.freebsd.org/D33020