When using relative paths for the linker we have to transform the name
since clang does not like -fuse-ld=ld.lld and instead requires -fuse-ld=lld
(the same also applies for ld.bfd).
This is needed so that setting LD/XLD is not ignored when linking with $CC
instead of directly using $LD. Currently only clang accepts an absolute
path for -fuse-ld= (Clang 12+ will add a new --ld-path flag), so we now
warn when building with GCC and $LD != "ld" since that might result in the
wrong linker being used.
We have been setting XLD=/path/to/cheri/ld.lld in CheriBSD for a long time and
used a similar version of this patch to avoid linking with /usr/bin/ld.
This change is also required when building FreeBSD on an Ubuntu with Clang:
In that case we set XCC=/usr/lib/llvm-10/bin/clang and since
/usr/lib/llvm-10/bin/ does not contain a "ld" binary the build fails with
`clang: error: unable to execute command: Executable "ld" doesn't exist!`
unless we pass -fuse-ld=/usr/lib/llvm-10/bin/ld.lld.
This change passes -fuse-ld instead of copying ${XLD} to WOLRDTMP/bin/ld
since then we would have to ensure that this file does not exist while
building the bootstrap tools. The cross-linker might not be compatible with
the host linker (e.g. when building on macos: host-linker= Mach-O /usr/bin/ld,
cross-linker=LLVM ld.lld).
Reviewed By: brooks, emaste
Differential Revision: https://reviews.freebsd.org/D26055
Assume gcc is at least 6.4, the oldest xtoolchain in the ports tree.
Assume clang is at least 6, which was in 11.2-RELEASE. Drop conditions
for older compilers.
Reviewed by: imp (earlier version), emaste, jhb
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D24802
Now that hw.machine_arch handles soft-float vs hard-float there is no
longer a reason for this config.
Submitted by: mhorne (kern.mk hunk)
Reviewed by: imp (earlier version), kp
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D24544
Use __riscv_flen instead of __riscv_float_abi_soft. While the latter works for
userland (and one could argue it's more correct), it fails for the kernel. We
compile the kernel with -mabi=lp64 (eg soft float abi) to avoid floating point
instructions in the kernel. We also compile the kernel -march=rv64imafdc for
hard float kernels (eg those with options FPE), but with -march=rv64imac for
softfloat kernels (eg those with FPE). Since we do this, in the kernel (as in
userland) __riscv_flen will be defined for 'riscv64' and not for 'riscv64sf'.
This also removes the -DMACHINE_ARCH hack now that it's no longer needed.
Longer term, we should return the ABI from the sysctl hw.machine_arch like on
amd64 for i386 binaries.
Suggested by: mhorne@
Differential Revision: https://reviews.freebsd.org/D23813
GENERICSF is just like GENERIC, only creates a soft-float kernel. Omit it from the
universe build for now.
Reviewed by: philip
Differential Revision: https://reviews.freebsd.org/D23812
the ! operator should have been a ~ instead:
Merge r357348 from the clang 10.0.0 import branch:
Disable new clang 10.0.0 warnings about converting the result of
shift operations to a boolean in tpm(4):
sys/dev/tpm/tpm_crb.c:301:32: error: converting the result of '<<' to a boolean; did you mean '(1 << (0)) != 0'? [-Werror,-Wint-in-bool-context]
WR4(sc, TPM_CRB_CTRL_CANCEL, !TPM_CRB_CTRL_CANCEL_CMD);
^
sys/dev/tpm/tpm_crb.c:73:34: note: expanded from macro 'TPM_CRB_CTRL_CANCEL_CMD'
#define TPM_CRB_CTRL_CANCEL_CMD BIT(0)
^
sys/dev/tpm/tpm20.h:60:19: note: expanded from macro 'BIT'
#define BIT(x) (1 << (x))
^
Such warnings can be useful in C++ contexts, but not so much in kernel
drivers, where this type of bit twiddling is commonplace. So disable
it for this case.
Noticed by: cem
MFC after: 3 days
operations to a boolean in tpm(4):
sys/dev/tpm/tpm_crb.c:301:32: error: converting the result of '<<' to a boolean; did you mean '(1 << (0)) != 0'? [-Werror,-Wint-in-bool-context]
WR4(sc, TPM_CRB_CTRL_CANCEL, !TPM_CRB_CTRL_CANCEL_CMD);
^
sys/dev/tpm/tpm_crb.c:73:34: note: expanded from macro 'TPM_CRB_CTRL_CANCEL_CMD'
#define TPM_CRB_CTRL_CANCEL_CMD BIT(0)
^
sys/dev/tpm/tpm20.h:60:19: note: expanded from macro 'BIT'
#define BIT(x) (1 << (x))
^
Such warnings can be useful in C++ contexts, but not so much in kernel
drivers, where this type of bit twiddling is commonplace. So disable it
for this case.
MFC after: 3 days
This is lame, but it's what we already do for the clang build. We take
misaligned pointers into network header structures in many places.
Reviewed by: ian
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D22876
When the linker doesn't have this feature, add -mno-relax to CFLAGS
on RISC-V.
Define the feature for ld.bfd, but not lld. If lld gains relaxation
support in a newer version, we can enable it for those versions of lld
in bsd.linker.mk.
Reviewed by: mhorne
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D22659
Use the -march and -mabi flags for both gcc and clang as they are
compatible. Specify the "medium" code model separately as it goes by the
name "medany" under gcc, although they are equivalent.
Reviewed by: markj
Approved by: markj (mentor)
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D21436
It is part of -Wformat, which is enabled by -Wall. Empty format strings are
well defined and it is perfectly reasonable to expect them in a formatting
interface.
Unmapped mbufs allow sendfile to carry multiple pages of data in a
single mbuf, without mapping those pages. It is a requirement for
Netflix's in-kernel TLS, and provides a 5-10% CPU savings on heavy web
serving workloads when used by sendfile, due to effectively
compressing socket buffers by an order of magnitude, and hence
reducing cache misses.
For this new external mbuf buffer type (EXT_PGS), the ext_buf pointer
now points to a struct mbuf_ext_pgs structure instead of a data
buffer. This structure contains an array of physical addresses (this
reduces cache misses compared to an earlier version that stored an
array of vm_page_t pointers). It also stores additional fields needed
for in-kernel TLS such as the TLS header and trailer data that are
currently unused. To more easily detect these mbufs, the M_NOMAP flag
is set in m_flags in addition to M_EXT.
Various functions like m_copydata() have been updated to safely access
packet contents (using uiomove_fromphys()), to make things like BPF
safe.
NIC drivers advertise support for unmapped mbufs on transmit via a new
IFCAP_NOMAP capability. This capability can be toggled via the new
'nomap' and '-nomap' ifconfig(8) commands. For NIC drivers that only
transmit packet contents via DMA and use bus_dma, adding the
capability to if_capabilities and if_capenable should be all that is
required.
If a NIC does not support unmapped mbufs, they are converted to a
chain of mapped mbufs (using sf_bufs to provide the mapping) in
ip_output or ip6_output. If an unmapped mbuf requires software
checksums, it is also converted to a chain of mapped mbufs before
computing the checksum.
Submitted by: gallatin (earlier version)
Reviewed by: gallatin, hselasky, rrs
Discussed with: ae, kp (firewalls)
Relnotes: yes
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D20616
-Wformat-zero-length does not highlight any particularly wrong code and it
is especially meaningless for device_printf(). Turn it off entirely to
remove a source of false positives.
Sponsored by: Dell EMC Isilon
add gcov support and export results as files in debugfs
Reviewed by: hps@
MFC after: 1 week
Sponsored by: iX Systems
Differential Revision: https://reviews.freebsd.org/D19260
This fixes a warning seen when compiling amd64 GENERIC with clang 7.
Also remove the workaround added in r337324. clang 7 and gcc 4.2
generate the same code with or without the code change.
Reviewed by: imp (previous version)
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D18603
CLANG_NO_IAS34 was introduced in r276696 to allow then-HEAD kernels to
be built with clang 3.4 in FreeBSD 10. As FreeBSD 11 and later includes
a version of Clang with a sufficiently capable integrated assembler we
do not need the workaround any longer.
Sponsored by: The FreeBSD Foundation
This was disabled recently due to lack of support in KDB disassembler
and DTrace FBT provider. Support for 'C'-extension to both of these was
added, so we can now enable 'C'-extension.
This reduces size of the kernel important for low-end embedded devices,
and saves cache footprint for high perfomance machines.
Approved by: re (kib)
Sponsored by: DARPA, AFRL
It works excellent, but KDB disassembler and DTrace FBT provider for
RISC-V do lack support for it. They currently handle 4-byte instructions
only, while C-compressed ISA extension introduces 2-byte instructions
freely mixing them together.
So disable it for now.
Reviewed by: markj@
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D16436
Remove all the big-endian arm architectures (ixp425 and ixp435)
support in the kernel and associated drivers.
Differential Revision: https://reviews.freebsd.org/D16257
We can't modify vendor code so there's no signal in warnings from it.
Similarly -Waddress-of-packed-member is not useful on networking code
as access to packed structures is fundamental to its operation.
Retpoline is a compiler-based mitigation for CVE-2017-5715, also known
as Spectre V2, that protects against speculative execution branch target
injection attacks.
In this commit it is disabled by default, but will be changed in a
followup commit.
Reviewed by: bdrewery (previous version)
MFC after: 3 days
Security: CVE-2017-5715
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D14242
This has the same effects on DDB working as -mcall=aixdesc, but also is
supported by clang and marginally improves kernel performance.
MFC after: 2 weeks
Instead, use a runtime decision to handle COP1 traps. If floating point
support is present in the current CPU, enable saving of the floating point
state. If support is not present, fail with SIGILL.
Reviewed by: imp, br
Sponsored by: DARPA / AFRL
Differential Revision: https://reviews.freebsd.org/D12707
Make armv7 as a new MACHINE_ARCH.
Copy all the places we do armv6 and add armv7 as basically an
alias. clang appears to generate code for armv7 by default. armv7 hard
float isn't supported by the the in-tree gcc, so it hasn't been
updated to have a new default.
Support armv7 as a new valid MACHINE_ARCH (and by extension
TARGET_ARCH).
Add armv7 to the universe build.
Differential Revision: https://reviews.freebsd.org/D12010
New version is not compatible on supervisor mode with v1.9.1
(previous version).
Highlights:
o BBL (Berkeley Boot Loader) provides no initial page tables
anymore allowing us to choose VM, to build page tables manually
and enable MMU in S-mode.
o SBI interface changed.
o GENERIC kernel.
FDT is now chosen standard for RISC-V hardware description.
DTB is now provided by Spike (golden model simulator). This
allows us to introduce GENERIC kernel. However, description
for console and timer devices is not provided in DTB, so move
these devices temporary to nexus bus.
o Supervisor can't access userspace by default. Solution is to
set SUM (permit Supervisor User Memory access) bit in sstatus
register.
o Compressed extension is now turned on by default.
o External GCC 7.1 compiler used.
o _gp renamed to __global_pointer$
o Compiler -march= string is now in use allowing us to choose
required extensions (compressed, FPU, atomic, etc).
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D11800
Previously the linker emulation was only passed when building binary
objects for firmware modules. This change always passes the desired
output format for kernel modules and kernels rather than requiring the
toolchain's default output format to match the desired output format.
This in turn permits use of external toolchains whose default output
format does not match the desired output format.
Reviewed by: imp, emaste
Sponsored by: DARPA / AFRL
Differential Revision: https://reviews.freebsd.org/D10085
* Clang/llvm does not (yet) support -m(no-)spe, so make it gcc-only
* Clang now supports -msoft-float, and does not appear to recognize
"-disable-ppc-float-in-variadic", which appears to have been a crutch until
soft-float was implemented. It's now implemented for both 32- and 64-bit.
* Clang/llvm use a 'medium' code model by default for powerpc64, supporting up
to 4GB TOC, and does not support the '-mminimal-toc' option. Given both of
these, make -mminimal-toc gcc-only.
MFC after: 2 weeks
Recognize new MACHINE_ARCH names now as we have added hardfloat support.
Switch JZ4780 to mipselhf and remove all uses of TARGET_ARCH in kernel
.mk files.
Reviewed by: adrian
Differential Revision: https://reviews.freebsd.org/D8989
