The prototype was added with the creation of kern_shutdown.c in r17658,
but it appears to have never been implemented. Remove it now.
Reviewed by: cem, kib
Differential Revision: https://reviews.freebsd.org/D26702
Dynamically created OIDs automatically get this flag set.
Reviewed by: jhb
MFC after: 1 week
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D26561
This is mostly needed for a common arm64/amd64 iommu code.
Reviewed by: kib
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D26587
The NOTES files have a bunch of hint lines that are removed when
generating LINT. However, we can achieve the same effect by prepending
each of the lines with 'envvar' so the NOTES files become standard
config(8) files. No functional changes as the sed script to generate
the LINT files filters these either way.
Suggested by: kevans
These definitions were repeated by all architectures, with small
variations. Consolidate the common definitons in machine
independent code and use bitset(9) macros for manipulation. Many
opportunities for deduplication remain in the machine dependent
minidump logic. The only intended functional change is increasing
the bit index type to vm_pindex_t, allowing the indexing of pages
with address of 8 TiB and greater.
Reviewed by: kib, markj
Approved by: scottl (implicit)
MFC after: 1 week
Sponsored by: Ampere Computing, Inc.
Differential Revision: https://reviews.freebsd.org/D26129
One problem with the bus_space_read_N() and bus_space_write_N() family of
functions is that they provide no protection against exceptions which can
occur when no physical hardware or device responds to the read or write
cycles. In such a situation, the system typically would panic due to a
kernel-mode bus error. The bus_space_peek_N() and bus_space_poke_N() family
of functions provide a mechanism to handle these exceptions gracefully
without the risk of crashing the system.
Typical example is access to PCI(e) configuration space in bus enumeration
function on badly implemented PCI(e) root complexes (RK3399 or Neoverse
N1 N1SDP and/or access to PCI(e) register when device is in deep sleep state.
This commit adds a real implementation for arm64 only. The remaining
architectures have bus_space_peek()/bus_space_poke() emulated by using
bus_space_read()/bus_space_write() (without exception handling).
MFC after: 1 month
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D25371
that can be extended, but also ensure compile-time type checking. Refactor
common code out of arch-specific implementations. Move the mpr and mps
drivers to this new API. The template type remains visible to the consumer
so that it can be allocated on the stack, but should be considered opaque.
For configurations without x2APIC support (guests, older hardware), the global
LAPIC MMIO mapping will trigger false-positive KCSan reports as it will appear
that multiple CPUs are concurrently reading and writing the same address.
This isn't actually true, as the underlying physical access will be performed
on the local CPU's APIC. Additionally, because LAPIC access can happen during
event timer configuration, the resulting KCSan printf can produce a panic due
to attempted recursion on event timer resources.
Add a __nosanitizethread preprocessor define to prevent the compiler from
inserting TSan hooks, and apply it to the x86 LAPIC accessors.
PR: 249149
Reported by: gbe
Reviewed by: andrew, kib
Tested by: gbe
Differential Revision: https://reviews.freebsd.org/D26354
It could be used in various IOMMU platforms, not only DMAR.
Reviewed by: kib
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D26373
We can switch into long mode directly with LA57 enabled.
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D25273
so we don't ifdef for every arch in busdma_iommu.c;
o No need to include specialreg.h for x86, remove it.
Requested by: andrew
Reviewed by: kib
Sponsored by: DARPA/AFRL
Differential Revision: https://reviews.freebsd.org/D25957
These functions were introduced before UMA started ensuring that freed
memory gets placed in domain-local caches. They no longer serve any
purpose since UMA now provides their functionality by default. Remove
them to simplyify the kernel memory allocator interfaces a bit.
Reviewed by: cem, kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D25937
so x86 can support Intel DMAR and AMD IOMMU simultaneously.
Reviewed by: kib
Sponsored by: DARPA/AFRL
Differential Revision: https://reviews.freebsd.org/D25894
APEI allows platform to report different kinds of errors to OS in several
ways. We've found that Supermicro X10/X11 motherboards report PCIe errors
appearing on hot-unplug via this interface using NMI. Without respective
driver it ended up in kernel panic without any additional information.
This driver introduces support for the APEI Generic Hardware Error Source
reporting via NMI, SCI or polling. It decodes the reported errors and
either pass them to pci(4) for processing or just logs otherwise. Errors
marked as fatal still end up in kernel panic, but some more informative.
When somebody get to native PCIe AER support implementation both of the
reporting mechanisms should get common error recovery code. Since in our
case errors happen when the device is already gone, there is nothing to
recover, so the code just clears the error statuses, practically ignoring
the otherwise destructive NMIs in nicer way.
MFC after: 2 weeks
Relnotes: yes
Sponsored by: iXsystems, Inc.
For purposes of handling hardware error reported via NMIs I need a way to
escape NMI context, being too restrictive to do something significant.
To do it this change introduces new swi_sched() flag SWI_FROMNMI, making
it careful about used KPIs. On platforms allowing IPI sending from NMI
context (x86 for now) it immediately wakes clk_intr_event via new IPI_SWI,
otherwise it works just like SWI_DELAY. To handle the delayed SWIs this
patch calls clk_intr_event on every hardclock() tick.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D25754
from Intel DMAR support, so it can be used on other IOMMU systems.
Reviewed by: kib
Sponsored by: DARPA/AFRL
Differential Revision: https://reviews.freebsd.org/D25743
It allows safe IPI sending to current CPU from NMI context.
Unlike other ipi_*() functions this waits for delivery to leave LAPIC in
a state safe for interrupted code.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
Sending IPI to self or all CPUs does not require write into upper part of
the ICR, prone to races. Previously the code disabled interrupts, but it
was not enough for NMIs. Instead of that when possible write only lower
part of the register, or use special SELF IPI register in x2APIC mode.
This also removes ICR reads used to preserve reserved bits on write.
It was there from the beginning, but I failed to find explanation why,
neither I see Linux doing it. Specification even tells that ICR content
may be lost in deep C-states, so if hardware does not bother to preserve
it, why should we?
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
pmc_cpuid was uninitialized for most AMD processor families. We can still
populate this string for unimplemented families.
Also added a CPUID_TO_STEPPING macro and converted existing code to use it.
Reviewed by: mav
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D25673
Stop using smp_ipi_mtx to protect global shootdown state, and
move/multiply the global state into pcpu. Now each CPU can initiate
shootdown IPI independently from other CPUs. Initiator enters
critical section, then fills its local PCPU shootdown info
(pc_smp_tlb_XXX), then clears scoreboard generation at location (cpu,
my_cpuid) for each target cpu. After that IPI is sent to all targets
which scan for zeroed scoreboard generation words. Upon finding such
word the shootdown data is read from corresponding cpu' pcpu, and
generation is set. Meantime initiator loops waiting for all zeroed
generations in scoreboard to update.
Initiator does not disable interrupts, which should allow
non-invalidation IPIs from deadlocking, it only needs to disable
preemption to pin itself to the instance of the pcpu smp_tlb data.
The generation is set before the actual invalidation is performed in
handler. It is safe because target CPU cannot return to userspace
before handler finishes. In principle only NMI can preempt the
handler, but NMI would see the kernel handler frame and not touch
not-invalidated user page table.
Handlers loop until they do not see zeroed scoreboard generations.
This, together with hardware keeping one pending IPI in LAPIC IRR
should prevent lost shootdowns.
Notes.
1. The code does protect writes to LAPIC ICR with exclusion. I believe
this is fine because we in fact do not send IPIs from interrupt
handlers. More for !x2APIC mode where ICR access for write requires
two registers write, we disable interrupts around it. If considered
incorrect, I can add per-cpu spinlock around ipi_send().
2. Scoreboard lines owned by given target CPU can be padded to the
cache line, to reduce ping-pong.
Reviewed by: markj (previous version)
Discussed with: alc
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
Differential revision: https://reviews.freebsd.org/D25510
so it can be used on other IOMMU systems.
Provide MI iommu_unit, iommu_domain and iommu_ctx structs in sys/iommu.h;
use them as a first member of MD dmar_unit, dmar_domain and dmar_ctx.
Change the namespace in DMAR backend: use iommu_ prefix instead of dmar_.
Move some macroses and function prototypes to sys/iommu.h.
Reviewed by: kib
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D25574
when it has passed the synchronization test.
"Processor Programming Reference (PPR) for AMD Family 17h" states that
the TSC uses a common reference for all sockets, cores and threads.
MFC after: 1 month
Given that 64c/128t CPUs are currently available, and that many
devices (nvme, many NICs) desire to map 1 MSI-X vector per core,
or even 1 per-thread, it is becoming far easier to see MSI-X interrupt
setup fail due to msi vector exhaustion, and devices fail to attach at
boot on large system.
This bump costs 12KB on amd64 (and 6KB on i386), which seems
worth the trade off for a better out of the box experience on
high end hardware.
Reviewed by: jhb
MFC after: 21 days
Sponsored by: Netflix
In particular, invalidation of the preloaded modules text to allow
execution from it was broken after D25188/r362031.
Reviewed by: markj
Reported by: delphij, dhw
Sponsored by: The FreeBSD Foundation
MFC after: 13 days