The warning used to be displayed for valid VPDs about 512B or above in
size. Fix the size check and add a break while here so that the routine
stops if if detects any problem.
Tested with "pciconf -lV"
Reviewed by: kib@, jhb@
MFC after: 1 week
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D23679
r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly marked). Use it in
preparation for a general review of all nodes.
This is non-functional change that adds annotations to SYSCTL_NODE and
SYSCTL_PROC nodes using one of the soon-to-be-required flags.
Reviewed by: imp, kib
Approved by: kib (mentor)
Differential Revision: https://reviews.freebsd.org/D23633
Platform (N1SDP).
Neoverse N1 is a high-performance ARM microarchitecture designed
by the ARM Holdings for the server market.
The PCI part on N1SDP was shipped untested and suffers from some
integration issues.
For instance accessing to not existing BDFs causes System Error
(SError) exception. To mitigate this, the firmware scans the bus,
catches SErrors and creates a table with valid BDFs. That allows
us to filter-out accesses to invalid BDFs in this driver.
Also the root complex config space (BDF == 0) has an unusual
location in memory map, so remapping accesses to it is required.
Finally, the config space is restricted to 32-bit accesses only.
This was tested on the ARM boxes kindly provided by the ARM Ltd
to the DARPA CHERI Project.
In collaboration with: andrew
Reviewed by: andrew
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D23349
o Make the pci_host_generic_acpi_attach() globally visible.
o Declare a new driver class.
These will be used by a new PCI root complex driver.
Sponsored by: DARPA, AFRL
First reported against ESXi 5.0, PCI passthrough was not working due to
MSI-X issues. However, this issue was fixed via patch releases against
ESXi 5.5 and 6.0 in 2016. Given ESXi 5.5 and earlier have been EOL, this
patch removes the VMware MSI-X blacklist entries in the quirk table.
PR: 203874
Reviewed by: imp, jhb
MFC after: 1 month
Sponsored by: VMware
Differential Revision: https://reviews.freebsd.org/D22819
Parse out the VSEC. If the user invokes a second -c command line option,
do a hex dump of the vendor data.
Reviewed by: imp
MFC after: 3 days
Sponsored by: Intel
Differential Revision: http://reviews.freebsd.org/D22808
With the ratification of the Berne Convention in 2000, it became obsolete.
I have removed that phrase and the "(c)" only from files without copyright
claims by other parties. There are 2 files (pci.c, pci_private.h) that are
also claimed by Michael Smith <msmith@freebsd.org> and by BSDi, which have
therefore not been included in this commit.
When all member nations of the Buenos Aires Convention adopted the Berne
Convention, the phrase "All rights reserved" became unnecessary to assert
copyright. Remove it from files under my copyright.
There are 2 files (pci.c, pci_private.h) that) that do also bear msmith's
and BSDi's copyright. I have left them unchanged for now, since I do not
know whether they (or the legal successor in case of BSDi) would agree.
Move the locking back into the ioctl handler. This "fixes" the race where we hve
a hot plug event just after the dropping of Giant in pci_find_dbsf, assuming the
driver doesn't then call anything that drops and picks up Giant again... It's a
little safer since don't think it doesn't, but we lack the tools to know for
sure.
The /dev/pci device doesn't need GIANT, per se. However, one routine
that it calls, pci_find_dbsf implicitly does. It walks a list that can
change when PCI scans a new bus. With hotplug, this means we could
have a race with that scanning. To prevent that, take out Giant around
scanning the list.
However, given that we have places in the tree that drop giant, if
held when we call into them, the whole use of Giant to protect newbus
may be less effective that we desire, so add a comment about why we're
talking it out, and we'll address the issue when we lock newbus with
something other than Giant.
According to my tests and errata to several generations of Intel CPUs,
PCIe hot-plug command completion reporting is not very reliable thing.
At least on my Supermicro X11DPi-NT board I never saw it reported.
Before this change timeout code detached devices and tried to disable
the slot, that in my case resulted in hot-plugged device being detached
just a second after it was successfully detected and attached. This
change removes that, so in case of timeout it just prints the error and
continue operation. Linux does the same.
MFC after: 1 week
Sponsored by: iXsystems, Inc.
PowerPC, and possibly other architectures, use different address ranges for
PCI space vs physical address space, which is only mapped at resource
activation time, when the BAR gets written. The DRM kernel modules do not
activate the rman resources, soas not to waste KVA, instead only mapping
parts of the PCI memory at a time. This introduces a
BUS_TRANSLATE_RESOURCE() method, implemented in the Open Firmware/FDT PCI
driver, to perform this necessary translation without activating the
resource.
In addition to system KPI changes, LinuxKPI is updated to handle a
big-endian host, by adding proper endian swaps to the I/O functions.
Submitted by: mmacy
Reported by: hselasky
Differential Revision: https://reviews.freebsd.org/D21096
table VCTRL registers.
Unconditionally program the MSI-X vector control Mask field for MSI-X
table entries without regarud for Mask's previous value. Some devices
return all zeros on reads of the VCTRL registers, which would cause us
to skip disabling interrupts. This fixes the Samsung SM961/PM961 SSDs
which are return zero starting from offset 0x3084 within the memory
region specified by BAR0, even when they are active MSI-X vectors.
The Illumos kernel writes these unconditionally to 0 or 1. However,
section 6.8.2.9 of the PCI Local Bus 3.0 spec (dated Feb 3, 2004)
states for bits 31::01:
After reset, the state of these bits must be 0. However, for
potential future use, software must preserve the value of
these reserved bits when modifying the value of other Vector
Control bits. If software modifies the value of these reserved
bits, the result is undefined."
so we always set or clear the Mask bit, but otherwise preserves the
old value.
PR: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=211713
Reviewed By: imp, jhb
Submitted by: Ka Ho Ng
MFC After: 1 week
Differential Revision: https://reviews.freebsd.org/D20873
address before returning it to the user. Some of the least significant
bits have special meaning and should be masked away.
Discussed with: kib@
MFC after: 3 days
Sponsored by: Mellanox Technologies
Prior to this commit, if PCIEM_SLOT_STA_ABP and PCIEM_SLOT_STA_PDC are
asserted simultaneously, FreeBSD sets a 5 second "hardware going away" timer
and then processes the "presence detect" change. In the (physically
challenging) case that someone presses the "attention button" and inserts
a new PCIe device at exactly the same moment, this results in FreeBSD
recognizing that the device is present, attaching it, and then detaching it
5 seconds later.
On EC2 "bare metal" hardware this is the precise sequence of events which
takes place when a new EBS volume is attached; virtual machines have no
difficulty effecting physically implausible simultaneity.
This patch changes the handling of PCIEM_SLOT_STA_ABP to only detach a
device if the presence of a device was detected *before* the interrupt
which reports the Attention Button push.
Reported by: Matt Wilson
Reviewed by: jhb
MFC after: 1 week
Sponsored by: https://www.patreon.com/cperciva
Differential Revision: https://reviews.freebsd.org/D20499
This allows replacing "sys/eventfilter.h" includes with "sys/_eventfilter.h"
in other header files (e.g., sys/{bus,conf,cpu}.h) and reduces header
pollution substantially.
EVENTHANDLER_DECLARE and EVENTHANDLER_LIST_DECLAREs were moved out of .c
files into appropriate headers (e.g., sys/proc.h, powernv/opal.h).
As a side effect of reduced header pollution, many .c files and headers no
longer contain needed definitions. The remainder of the patch addresses
adding appropriate includes to fix those files.
LOCK_DEBUG and LOCK_FILE_LINE_ARG are moved to sys/_lock.h, as required by
sys/mutex.h since r326106 (but silently protected by header pollution prior
to this change).
No functional change (intended). Of course, any out of tree modules that
relied on header pollution for sys/eventhandler.h, sys/lock.h, or
sys/mutex.h inclusion need to be fixed. __FreeBSD_version has been bumped.
When activating a resource do not compare the resource id to the adress.
Treat IO region as MEMORY region too.
Submitted by: Tuan Phan <tphan@amperecomputing.com> (Original Version)
Sponsored by: Ampere Computing, LLC
Differential Revision: https://reviews.freebsd.org/D20214
We cannot know the bus end number before parsing the MCFG table
so don't set the bus_end before that. If the MCFG table doesn't
exist we will set the configuration base address based on the _CBA
value and set the bus_end to the maximal number allowed by PCI.
Sponsored by: Ampere Computing, LLC
Differential Revision: https://reviews.freebsd.org/D20213
For PCI device (i.e. child of a PCI bus), reset tries FLR if
implemented and worked, and falls to power reset otherwise.
For PCIe bus (child of a PCIe bridge or root port), reset
disables PCIe link and then re-trains it, performing what is known as
link-level reset.
Reviewed by: imp (previous version), jhb (previous version)
Sponsored by: Mellanox Technologies
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D19646
When pci_realloc_bars was first added, the intention was to eventually
enable it by default, but it was left disabled to preserve existing
behavior. The setting is pretty conservative in that it does not
attempt to allocate resources for BARs that the BIOS/firmware leaves
disabled. It only attempts to reallocate resources for a BAR that the
firmware programmed during boot but that conflicts with another
resource during the kernel's device scan.
PR 221350 is an example of a machine that this knob fixes.
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D18965
Use the information from IORT parsing to translate the PCI RID to
GIC ITS device ID. And similarly, use the information to find the
PIC XREF identifier to be used for PCI devices.
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D18004
The goal of this change is to fix a problem with PCI shared interrupts
during suspend and resume.
I have observed a couple of variations of the following scenario.
Devices A and B are on the same PCI bus and share the same interrupt.
Device A's driver is suspended first and the device is powered down.
Device B generates an interrupt. Interrupt handlers of both drivers are
called. Device A's interrupt handler accesses registers of the powered
down device and gets back bogus values (I assume all 0xff). That data is
interpreted as interrupt status bits, etc. So, the interrupt handler
gets confused and may produce some noise or enter an infinite loop, etc.
This change affects only PCI devices. The pci(4) bus driver marks a
child's interrupt handler as suspended after the child's suspend method
is called and before the device is powered down. This is done only for
traditional PCI interrupts, because only they can be shared.
At the moment the change is only for x86.
Notable changes in core subsystems / interfaces:
- BUS_SUSPEND_INTR and BUS_RESUME_INTR methods are added to bus
interface along with convenience functions bus_suspend_intr and
bus_resume_intr;
- rman_set_irq_cookie and rman_get_irq_cookie functions are added to
provide a way to associate an interrupt resource with an interrupt
cookie;
- intr_event_suspend_handler and intr_event_resume_handler functions
are added to the MI interrupt handler interface.
I added two new interrupt handler flags, IH_SUSP and IH_CHANGED, to
implement the new intr_event functions. IH_SUSP marks a suspended
interrupt handler. IH_CHANGED is used to implement a barrier that
ensures that a change to the interrupt handler's state is visible
to future interrupts.
While there, I fixed some whitespace issues in comments and changed a
couple of logically boolean variables to be bool.
MFC after: 1 month (maybe)
Differential Revision: https://reviews.freebsd.org/D15755
Mark some buses as BUS_PASS_BUS, and some resources as BUS_PASS_RESOURCE.
This also decouples some resource attachment orderings from being races by
device tree ordering, instead relying on the bus pass to provide the
ordering.
This was originally intended to support multipass suspend/resume, but it's
also needed on PowerMacs when using fdt, as the device tree seems to get
created in reverse of the OFW tree.
Reviewed by: nwhitehorn (long ago)
Differential Revision: https://reviews.freebsd.org/D918
Now that the ACPI and FDT implementations for activating and
deactivating resources are the same, we can move it to
pci_host_generic.c. No functional changes.
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D17793
Now that we are handling PCI resources in pci_host_generic_acpi.c, we
don't need these change (made by r336129)
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D17792
This is a major update for pci_host_generic_acpi.c, the current
implementation has some gaps that are better fixed up in one go.
The changes are to:
* Follow x86 method of not adding PCI resources to PCI host bridge in
ACPI code. This has been moved to pci_host_generic_acpi.c, where we
walk thru its resources of the host bridge and add them.
* Fixup code in pci_host_generic_acpi.c to read all decoded ranges
and update the 'ranges' property. This allows us to share most of
the code with generic implementation (and the FDT one).
* Parse and setup IO ranges and bus ranges when walking the resources
above. Drop most of the changes related to this from acpica code.
* Add the ECAM memory area as mem resource 0. Implement the logic to
get the ECAM area from MCFG (using bus range which we now decode),
or from _CBA (using _BBN/bus range). Drop aarch64 ifdefs from acpica
code which did part of this.
* Switch resource activation to similar code as FDT implementation,
this can be moved into generic implementation in a later pass.
* Drop the mechanism of using the 7th bit of bus number as the domain,
this is not correct and will work only in very specific cases. Use
_SEG as PCI domain and use the bus ranges of the host bridge to
provide start bus number.
This commit should not make any functional change to dev/acpica/acpi.c
for other architectures, almost all the changes there are to revert
earlier additions in this file done for aarch64.
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D17791
Both ACPI and FDT support bus ranges for pci host bridges. Update
pci_host_generic*.[ch] with a default implementation to support this.
This will be used in the next set of changes for ACPI based host
bridge. No functional changes in this commit.
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D17657
Fix up pci_host_generic.c and pci_host_generic_fdt.c to allocate
resources against devices that requested them. Currently the
allocation happens against the pcib, which is incorrect.
This is needed for the upcoming changes for fixing up
pci_host_generic_acpi.c
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D17656
The current quirk implementation writes a fixed address to the PCI BAR
to fix a firmware bug. The PCI BARs are allocated by firmware and will
change depending on PCI devices present. So using a fixed address here
is not correct.
This quirk worked around a firmware bug that programmed the MSI-X bar
of the SATA controller incorrectly. The newer firmware does not have
this issue, so it is better to drop this quirk altogether.
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D17655
The pre-7.x compat for both native and 32-bit code was already in
pci_user.c. Use this infrastructure to add implement 32-bit support.
This is more correct as ioctl(2) commands only have meaning in the
context of a file descriptor.
Reviewed by: kib
Approved by: re (gjb)
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential revision: https://reviews.freebsd.org/D17324
Remove unused and easy to misuse PNP macro parameter
Inspired by r338025, just remove the element size parameter to the
MODULE_PNP_INFO macro entirely. The 'table' parameter is now required to
have correct pointer (or array) type. Since all invocations of the macro
already had this property and the emitted PNP data continues to include the
element size, there is no functional change.
Mostly done with the coccinelle 'spatch' tool:
$ cat modpnpsize0.cocci
@normaltables@
identifier b,c;
expression a,d,e;
declarer MODULE_PNP_INFO;
@@
MODULE_PNP_INFO(a,b,c,d,
-sizeof(d[0]),
e);
@singletons@
identifier b,c,d;
expression a;
declarer MODULE_PNP_INFO;
@@
MODULE_PNP_INFO(a,b,c,&d,
-sizeof(d),
1);
$ rg -l MODULE_PNP_INFO -- sys | \
xargs spatch --in-place --sp-file modpnpsize0.cocci
(Note that coccinelle invokes diff(1) via a PATH search and expects diff to
tolerate the -B flag, which BSD diff does not. So I had to link gdiff into
PATH as diff to use spatch.)
Tinderbox'd (-DMAKE_JUST_KERNELS).
Approved by: re (glen)
From PCI Spec rev 2.2, 6.2.1. Device Identification:
Vendor ID This field identifies the manufacturer of the device. Valid
vendor identifiers are allocated by the PCI SIG to ensure uniqueness.
0FFFFh is an invalid value for Vendor ID.
MFC after: 3 days
Approved by: re (Glen), hselasky (mentor), kib (mentor)
Sponsored by: Mellanox Technologies
