POSIX and en_US.US_ASCII are aliases (symlinks) to the C locale. They were
not previously tagged with a pkgbase pacakge. Add the tag so that they are
handled correctly on pkgbase-installed/updated systems.
Discussed with: manu
All gotos to the label are within the #ifdef INET section, which leaves
us with an unused label. Cover the label under #ifdef INET as well to
avoid the warning and compile time error.
Redirect (and temporal) route expiration was broken a while ago.
This change brings route expiration back, with unified IPv4/IPv6 handling code.
It introduces net.inet.icmp.redirtimeout sysctl, allowing to set
an expiration time for redirected routes. It defaults to 10 minutes,
analogues with net.inet6.icmp6.redirtimeout.
Implementation uses separate file, route_temporal.c, as route.c is already
bloated with tons of different functions.
Internally, expiration is implemented as an per-rnh callout scheduled when
route with non-zero rt_expire time is added or rt_expire is changed.
It does not add any overhead when no temporal routes are present.
Callout traverses entire routing tree under wlock, scheduling expired routes
for deletion and calculating the next time it needs to be run. The rationale
for such implemention is the following: typically workloads requiring large
amount of routes have redirects turned off already, while the systems with
small amount of routes will not inhibit large overhead during tree traversal.
This changes also fixes netstat -rn display of route expiration time, which
has been broken since the conversion from kread() to sysctl.
Reviewed by: bz
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D23075
with this widen network epoch coverage up to tcp_connect() and udp_connect().
Revisions from r356974 and up to this revision cover D23187.
Differential Revision: https://reviews.freebsd.org/D23187
modified by this function are protected by the PCB list lock that is
acquired inside the function.
This could have been done even before epoch changes, after r286227.
As part of the FreeBSD powerpc* flag day (1300070), the auxv numbering was
changed to match every other platform.
See D20799 for more details on that change.
While the kernel and rtld were adapted, libc was not, so old dynamic
binaries broke for reasons other than the ABI change on powerpc64.
Since it's possible to support nearly everything regarding old binaries by
adding compatibility code to libc (as besides rtld, it is the main point
where auxv is digested), we might as well provide compatibility code.
The only unhandled case remaining should be "new format libraries that call
elf_aux_info() which are dynamically linked to by old-format binaries",
which should be quite rare.
Reviewed by: jhibbits
Sponsored by: Tag1 Consulting, Inc.
Differential Revision: https://reviews.freebsd.org/D23096
In the case of an error, the RFSPAWN'd thread will write back to psa->error
with the correct exit code. Mark this as volatile as the return value is
being actively dorked up for erroneous exits on !x86.
This fixes the following tests, tested on aarch64 (only under qemu, at the
moment):
- posix_spawn/spawn_test:t_spawn_missing
- posix_spawn/spawn_test:t_spawn_nonexec
- posix_spawn/spawn_test:t_spawn_zero
Reported by: mikael
MFC after: 3 days
The build failure was discoved by Michael Dexter's recent Build Options
Survey run, at https://callfortesting.org/results/bos-2020-01-16/\
WITHOUT_WPA_SUPPLICANT_EAPOL-small.txt.
Reported by: Michael Dexter <editor@callfortesting.org> via emaste
MFC after: 2 weeks
This unbreaks Mono (mono-devel-4.6.2.7+dfsg-1ubuntu1 from Ubuntu Bionic);
previously would crash on "amd64_is_imm32" assert.
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Static relocations for the immediate operand of a branch instruction
must be applied.
In a patch which implements LSE-based atomic(9) operations using ifuncs,
-zifunc-noplt reduces system CPU usage during a buildkernel by several
percent.
Also fix elf_reloc_internal() to return an error if symbol lookup fails.
Reviewed by: andrew
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D17392
The Linux32 system call argument fetcher places each argument (passed in
registers in the Linux x86 system call convention) into an entry in the
generic system call args array. Each member of this array is 8 bytes
wide, so this approach is broken for system calls that take off_t
arguments.
Fix the problem by splitting l_loff_t arguments in the 32-bit system
call descriptions, the same as we do for FreeBSD32. Change entry points
to handle this using the PAIR32TO64 macro.
Move linux_ftruncate64() into compat/linux.
PR: 243155
Reported by: Alex S <iwtcex@gmail.com>
Reviewed by: kib (previous version)
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D23210
As a new x86 CPU vendor, Chengdu Haiguang IC Design Co., Ltd (Hygon)
is a joint venture between AMD and Haiguang Information Technology Co.,
Ltd., aims at providing x86 processors for China server market.
The first generation Hygon processor(Dhyana) shares most architecture
with AMD's family 17h, but with different CPU vendor ID("HygonGenuine")
and PCI vendor ID(0x1d94) and family series number 18h(Hygon negotiated
with AMD to confirm that only Hygon use family 18h).
To enable Hygon Dhyana support in FreeBSD, add new definitions
HYGON_VENDOR_ID("HygonGenuine") and X86_VENDOR_HYGON(0x1d94) to identify
Hygon Dhyana CPU.
Initialize the CPU features(topology, local APIC ext, MSI, TSC, hwpstate,
MCA, DEBUG_CTL, etc) for amd64 and i386 mode by sharing the code path of
AMD family 17h.
The changes have been applied on FreeBSD 13.0-CURRENT and tested
successfully on Hygon Dhyana processor.
References:
[1] Linux kernel patches for Hygon Dhyana, merged in 4.20:
https://git.kernel.org/tip/c9661c1e80b609cd038db7c908e061f0535804ef
[2] MSR and CPUID definition:
https://www.amd.com/system/files/TechDocs/54945_PPR_Family_17h_Models_00h-0Fh.pdf
Submitted by: Pu Wen <puwen@hygon.cn>
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D23163
The main objective here is to make it easy to identify what needs to change
in order to use a different sysent generator than the current Lua-based one,
which may be used to MFC some of the changes that have happened so we can
avoid parallel accidents in stable branches, for instance.
As a secondary objective, it's now feasible to override the generator on a
per-Makefile basis if needed, so that one could refactor their Makefile to
use this while pinning generation to the legacy makesyscalls.sh. I don't
anticipate any consistent need for such a thing, but it's low-effort to
achieve.
no longer need an object lock. This reduces the longest hold times and
eliminates some trylock code blocks.
Reviewed by: kib, markj
Differential Revision: https://reviews.freebsd.org/D23034
Add 8548 CPU definition and attributes
8548 CPU is GCC's name for the e500v2, so accept this in clang. The
e500v2 doesn't support lwsync, so define __NO_LWSYNC__ for this as
well, as GCC does.
Differential Revision: https://reviews.llvm.org/D67787
Merge commit ff0311c4b from llvm git (by Justin Hibbits):
[PowerPC]: Add powerpcspe target triple subarch component
Summary:
This allows the use of '-target powerpcspe-unknown-linux-gnu' or
'powerpcspe-unknown-freebsd' to be used, instead of '-target
powerpc-unknown-linux-gnu -mspe'.
Reviewed By: dim
Differential Revision: https://reviews.llvm.org/D72014
Merge commit ba91dffaf from llvm git (by Fangrui Song):
[Driver][PowerPC] Move powerpcspe logic from cc1 to Driver
Follow-up of D72014. It is more appropriate to use a target feature
instead of a SubTypeArch to express the difference.
Reviewed By: #powerpc, jhibbits
Differential Revision: https://reviews.llvm.org/D72433
commit 36eedfcb3 from llvm git (by Justin Hibbits):
[PowerPC] Fix powerpcspe subtarget enablement in llvm backend
Summary:
As currently written, -target powerpcspe will enable SPE regardless
of disabling the feature later on in the command line. Instead,
change this to just set a default CPU to 'e500' instead of a generic
CPU.
As part of this, add FeatureSPE to the e500 definition.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D72673
These are needed to unbreak the build for powerpcspe.
Requested by: jhibbits
MFC after: 1 week
and the headers. If the user decides to install the system without Casper
support, then the Casper functions are mocked, but they still exist in
the system.
PR: 242971
MFC after: 2 weeks