(type 1 and type 2) as well as leaf devices (type 0). In particular,
this allows the existing PCI bus logic to save and restore capability
registers such as MSI and PCI-express work for bridge devices rather than
requiring that code to be duplicated in bridge drivers. It also means
that bridge drivers no longer need to save and restore basic registers
such as the PCI command register or BARs nor manage powerstates for the
bridge device.
While here, pci_setup_secbus() has been changed to initialize the 'sec'
and 'sub' fields in the 'secbus' structure instead of requiring the pcib
and pccbb drivers to do this in the NEW_PCIB + PCI_RES_BUS case.
Differential Revision: https://reviews.freebsd.org/D2240
Reviewed by: imp, jmg
MFC after: 2 weeks
for type 0 devices, not type 1 or 2 bridges. Don't read them for bridge
devices during bus scans and return an error when attempting to read them
as ivars for bridge devices.
When creating VFs, we must size each SR-IOV BAR on the PF and
allocate a configuous I/O memory window large enough for every VF.
However, the window only needs to be aligned to a boundary equal
to the size of the window for a single VF.
When a VF attempts to allocate an I/O memory resource, we must
intercept the request in the pci driver and pass it off to the
SR-IOV code, which will allocate the correct window from the
pre-allocated memory space for the PF.
Inform the pci driver about the size and address of the BARs on
the VF when the VF is created. This is required by pciconf -b and
bhyve.
Differential Revision: https://reviews.freebsd.org/D78
Reviewed by: jhb
MFC after: 1 month
Sponsored by: Sandvine Inc.
The SR-IOV standard requires VFs to read all-ones when the VID
and DID registers are read. The VMM (hypervisor) is required to
emulate them instead. Make pci_read_config() do this emulation.
Change pci_user.c to use pci_read_config() to read config space
registers instead of going directly to the pcib so that the
emulated VID/DID registers work correctly on VFs. This is
required both for pciconf and bhyve PCI passthrough.
Differential Revision: https://reviews.freebsd.org/D77
Reviewed by: jhb
MFC after: 1 month
Sponsored by: Sandvine Inc.
Implement the interace to create SR-IOV Virtual Functions (VFs).
When a driver registers that they support SR-IOV by calling
pci_setup_iov(), the SR-IOV code creates a new node in /dev/iov
for that device. An ioctl can be invoked on that device to
create VFs and have the driver initialize them.
At this point, allocating memory I/O windows (BARs) is not
supported.
Differential Revision: https://reviews.freebsd.org/D76
Reviewed by: jhb
MFC after: 1 month
Sponsored by: Sandvine Inc.
Refactor PCI resource allocation code to allow a request for a
memory-mapped I/O window that is a multiple of a requested size.
This is needed by the SR-IOV code because the VF BARs are all
allocated contiguously. We can't just allocate a resource that is
a multiple of a single VF BAR because the size of an allocation
implies its alignment requirement.
Differential Revision: https://reviews.freebsd.org/D71
Reviewed by: jhb
MFC after: 1 month
Sponsored by: Sandvine Inc.
Refactor creation of PCI devices into helper methods that can be
used by the VF creation code.
Differential Revision: https://reviews.freebsd.org/D67
Reviewed by: jhb
MFC after: 1 month
Sponsored by: Sandvine Inc.
allows the user to request administrative changes to individual devices
such as attach or detaching drivers or disabling and re-enabling devices.
- Add a new /dev/devctl2 character device which uses ioctls for device
requests. The ioctls use a common 'struct devreq' which is somewhat
similar to 'struct ifreq'.
- The ioctls identify the device to operate on via a string. This
string can either by the device's name, or it can be a bus-specific
address. (For unattached devices, a bus address is the only way to
locate a device.) Bus drivers register an eventhandler to claim
unrecognized device names that the driver recognizes as a valid address.
Two buses currently support addresses: ACPI recognizes any device
in the ACPI namespace via its full path starting with "\" and
the PCI bus driver recognizes an address specification of
'pci[<domain>:]<bus>:<slot>:<func>' (identical to the PCI selector
strings supported by pciconf).
- To make it easier to cut and paste, change the PnP location string
in the PCI bus driver to output a full PCI selector string rather
than 'slot=<slot> function=<func>'.
- Add a devctl(3) interface in libdevctl which provides a wrapper around
the ioctls and is the preferred interface for other userland code.
- Add a devctl(8) program which is a simple wrapper around the requests
supported by devctl(3).
- Add a device_is_suspended() function to check DF_SUSPENDED.
- Add a resource_unset_value() function that can be used to remove a
hint from the kernel environment. This is used to clear a
hint.<driver>.<unit>.disabled hint when re-enabling a boot-time
disabled device.
Reviewed by: imp (parts)
Requested by: imp (changing PCI location string)
Relnotes: yes
for the lookup.
- For devices affected by PCI_QUIRK_MSI_INTX_BUG, ensure PCIM_CMD_INTxDIS
is cleared when using MSI/MSI-X.
- Employ PCI_QUIRK_MSI_INTX_BUG for BCM5714(S)/BCM5715(S)/BCM5780(S) rather
than clearing PCIM_CMD_INTxDIS unconditionally for all devices in bge(4).
MFC after: 3 days
state said device should go into.
This was a snafu introduced in the ACPI/PCI awareness separation.
When putting a device into a power state, the bus (and thus firmware,
eg ACPI) should be asked before hand to check whether the device
can indeed go into that power state.
There's a set of nodes in ACPI under each device - the _SxD nodes - which
state which ACPI power state to put the device into when the system is
going into power save state 'x'. So when going into S3, the existence
of an _S3D node would override whatever the system was trying to do.
By default the PCI code wants to put devices into D3 before suspending.
I have a laptop here (Asus Zenbook - check the PR) whose EHCI controller
really wants to be in D2 during suspend, not D3. So if we put it into
D3 and then try to enter S3, everything hangs. The device itself
can go into D3 - it just can't be there when the call to ACPI to enter
S3 occurs. The PCI patch fixes this.
jkim@ noticed that the same is needed for the ACPI child device
enumeration.
Thankyou to Matt Dillon (the programmer, not the actor) for buying me
this particular laptop so I could debug the issues with the Atheros
AR9485 that is in it. It's his fault that I ended up with this
laptop and was sufficiently annoyed by the lack of USB suspend
to go down this rabbit hole.
Tested:
* Thinkpad T400
* Thinkpad X230
* Thinkpad T42
* Thinkpad T60
* Asus Zenbook (see PR)
* Asus EEEPC 701
* Asus EEEPC 1001PX
TODO:
* Figure out what we should do about devices we unload drivers for
that want to be in a specific state when entering S3 / S4 -
the "put devices into D3 if they're not bound to a driver" option
may also mess with things.
PR: kern/194884
Reviewed by: jhb, jkim
MFC after: 1 week
Relnotes: yes
Sponsored by: Matt Dillon <dillon@apollo.backplane.com> (hardware)
in userland rename in-kernel getenv()/setenv() to kern_setenv()/kern_getenv().
This fixes a namespace collision with libc symbols.
Submitted by: kmacy
Tested by: make universe
* Add a bus_if.m method - get_domain() - returning the VM domain or
ENOENT if the device isn't in a VM domain;
* Add bus methods to print out the domain of the device if appropriate;
* Add code in srat.c to save the PXM -> VM domain mapping that's done and
expose a function to translate VM domain -> PXM;
* Add ACPI and ACPI PCI methods to check if the bus has a _PXM attribute
and if so map it to the VM domain;
* (.. yes, this works recursively.)
* Have the pci bus glue print out the device VM domain if present.
Note: this is just the plumbing to start enumerating information -
it doesn't at all modify behaviour.
Differential Revision: D906
Reviewed by: jhb
Sponsored by: Norse Corp
Summary:
Add the beginnings of multipass suspend/resume, by introducing
BUS_SUSPEND_CHILD/BUS_RESUME_CHILD, and move the PCI driver to this.
Reviewers: jhb
Reviewed By: jhb
Differential Revision: https://reviews.freebsd.org/D590
This is needed so when running under Xen the calls to pci_child_added
can be intercepted and a custom Xen method can be used to register
those devices with Xen. This should not include any functional
change, since the Xen implementation will be added in a following
patch and the native implementation is a noop.
Sponsored by: Citrix Systems R&D
Reviewed by: jhb
dev/pci/pci.c:
dev/pci/pci_if.m:
dev/pci/pci_private.h:
dev/pci/pcivar.h:
- Add the pci_child_added newbus method.
Make the functions pci_disable_msi, pci_enable_msi and pci_enable_msix
methods of the newbus PCI bus. This code should not include any
functional change.
Sponsored by: Citrix Systems R&D
Reviewed by: imp, jhb
Differential Revision: https://reviews.freebsd.org/D354
dev/pci/pci.c:
- Convert the mentioned functions to newbus methods.
- Fix the callers of the converted functions.
sys/dev/pci/pci_private.h:
dev/pci/pci_if.m:
- Declare the new methods.
dev/pci/pcivar.h:
- Add helpers to call the newbus methods.
ofed/include/linux/pci.h:
- Add define to prevent the ofed version of pci_enable_msix from
clashing with the FreeBSD native version.
These changes prevent sysctl(8) from returning proper output,
such as:
1) no output from sysctl(8)
2) erroneously returning ENOMEM with tools like truss(1)
or uname(1)
truss: can not get etype: Cannot allocate memory
there is an environment variable which shall initialize the SYSCTL
during early boot. This works for all SYSCTL types both statically and
dynamically created ones, except for the SYSCTL NODE type and SYSCTLs
which belong to VNETs. A new flag, CTLFLAG_NOFETCH, has been added to
be used in the case a tunable sysctl has a custom initialisation
function allowing the sysctl to still be marked as a tunable. The
kernel SYSCTL API is mostly the same, with a few exceptions for some
special operations like iterating childrens of a static/extern SYSCTL
node. This operation should probably be made into a factored out
common macro, hence some device drivers use this. The reason for
changing the SYSCTL API was the need for a SYSCTL parent OID pointer
and not only the SYSCTL parent OID list pointer in order to quickly
generate the sysctl path. The motivation behind this patch is to avoid
parameter loading cludges inside the OFED driver subsystem. Instead of
adding special code to the OFED driver subsystem to post-load tunables
into dynamically created sysctls, we generalize this in the kernel.
Other changes:
- Corrected a possibly incorrect sysctl name from "hw.cbb.intr_mask"
to "hw.pcic.intr_mask".
- Removed redundant TUNABLE statements throughout the kernel.
- Some minor code rewrites in connection to removing not needed
TUNABLE statements.
- Added a missing SYSCTL_DECL().
- Wrapped two very long lines.
- Avoid malloc()/free() inside sysctl string handling, in case it is
called to initialize a sysctl from a tunable, hence malloc()/free() is
not ready when sysctls from the sysctl dataset are registered.
- Bumped FreeBSD version to indicate SYSCTL API change.
MFC after: 2 weeks
Sponsored by: Mellanox Technologies
Ensure that first_func is set to 0 on every iteration of the PCI slot
enumeration loop after the first. There is a continue statement that would
cause first_func to stay at 1 any PCI device where slot 0 has no functions
until we find a slot that does have a function. This would cause us to
not enumerate the first PCI function on the device.
Credit to markj@ for spotting the bug.
X-MFC-With: r264011
PCIe Alternate RID Interpretation (ARI) is an optional feature that
allows devices to have up to 256 different functions. It is
implemented by always setting the PCI slot number to 0 and
re-purposing the 5 bits used to encode the slot number to instead
contain the function number. Combined with the original 3 bits
allocated for the function number, this allows for 256 functions.
This is enabled by default, but it's expected to be a no-op on currently
supported hardware. It's a prerequisite for supporting PCI SR-IOV, and
I want the ARI support to go in early to help shake out any bugs in it.
ARI can be disabled by setting the tunable hw.pci.enable_ari=0.
Reviewed by: kib
MFC after: 2 months
Sponsored by: Sandvine Inc.
My PCI RID changes somehow got intermixed with my PCI ARI patch when I
committed it. I may have accidentally applied a patch to a non-clean
working tree. Revert everything while I figure out what went wrong.
Pointy hat to: rstone
I/O windows, the default is to preserve the firmware-assigned resources.
PCI bus numbers are only managed if NEW_PCIB is enabled and the architecture
defines a PCI_RES_BUS resource type.
- Add a helper API to create top-level PCI bus resource managers for each
PCI domain/segment. Host-PCI bridge drivers use this API to allocate
bus numbers from their associated domain.
- Change the PCI bus and CardBus drivers to allocate a bus resource for
their bus number from the parent PCI bridge device.
- Change the PCI-PCI and PCI-CardBus bridge drivers to allocate the
full range of bus numbers from secbus to subbus from their parent bridge.
The drivers also always program their primary bus register. The bridge
drivers also support growing their bus range by extending the bus resource
and updating subbus to match the larger range.
- Add support for managing PCI bus resources to the Host-PCI bridge drivers
used for amd64 and i386 (acpi_pcib, mptable_pcib, legacy_pcib, and qpi_pcib).
- Define a PCI_RES_BUS resource type for amd64 and i386.
Reviewed by: imp
MFC after: 1 month
are mostly useful for debugging.
- hw.pci.clear_bars ignores all firmware-assigned ranges for BARs when
set.
- hw.pci.clear_pcib ignores all firmware-assigned ranges for PCI-PCI
bridge I/O windows when set.
MFC after: 1 week
- Store the length of each read-only VPD value since not all values are
guaranteed to be ASCII values (though most are).
- Add a new pciio ioctl to fetch VPD for a single PCI device. The values
are returned as a list of variable length records, one for the device
name and each keyword.
- Add a new -V flag to pciconf's list mode which displays VPD data for
each device.
MFC after: 1 week
referenced by pointer, making it non-static should not have even the
negligible impact on the existing code.
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
beasts still exist unfortunately. More details can be found in other
references, but the short version is that bridges with this bit set ignore
I/O port ranges that alias to valid ISA I/O port ranges. In the driver
this requires not allocating these alias regions from the parent device
(so they are free to be acquired by ISA devices), and ensuring no child
devices use resources from these alias regions.
- Change the pcib_window structure to allow for an array of backing
resources rather than a single resource and update the existing code
to cope with this. Some of the coping requires using the saved
base and limit values in pcib_window instead of using rman operations
on the backing resource.
- Add special handling for allocating and adjusting the I/O port window
of an ISA-enabled bridge to only allocate the non-alias ranges and
add those to the associated resource manager.
- Reject I/O port allocations for a fixed request that conflicts with an
ISA alias range.
- Remove the "no prefected decode" verbose printf during boot. The absence
of a "prefetched decode" line is sufficient.
- Replace the "subtractively decoded bridge" verbose printf with a single
printf that lists all the "special" decoding modes of a bridge: ISA,
subtractive, and VGA.
- Add a custom bus_release_resource() method to the PCI bus driver so that
it can properly free resources for I/O windows of PCI-PCI bridges.
(These resources are not stored in the bridge device's resource list.)
PR: misc/179033
MFC after: 2 weeks
VMware up to at least ESXi 5.1. Actually, using INTx in that case instead
may still result in interrupt storms, with MSI being the only working
option in some configurations. So introduce a PCI_QUIRK_DISABLE_MSIX quirk
which only blacklists MSI-X but not also MSI and use it for the VMware
PCI-PCI-bridges. Note that, currently, we still assume that if MSI doesn't
work, MSI-X won't work either - but that's part of the internal logic and
not guaranteed as part of the API contract. While at it, add and employ
a pci_has_quirk() helper.
Reported and tested by: Paul Bucher
- Use NULL instead of 0 for pointers.
Submitted by: jhb (mostly)
Approved by: jhb
MFC after: 3 days
bug where a PCI device would be powered down if it failed to probe, but
not when its driver was detached (e.g. via kldunload).
- Add a new helper method resource_list_release_active() which forcefully
releases any active resources of a specified type from a resource list.
- Add a bus_child_detached method for the PCI bus driver which forces any
active resources to be released (and whines to the console if it finds
any) and then powers the device down.
- Call pci_child_detached() if we fail to probe a device when a driver
is kldloaded. This isn't perfect but can avoid leaking resources
from a probe() routine in the kldload case.
Reviewed by: imp, brooks
MFC after: 1 month
tester of this fix, and realloc_bars breaks some other cases as a small
BAR that is reallocated can end up grabbing space needed by a much larger
BAR in the existing window of a PCI-PCI bridge.
MFC after: 3 days
assigned conflicting ranges to BARs then leaving the BARs alone could
result in one device stealing mmio accesses intended to go to a second
device. Prior to 233677 the PCI bus driver attempted to handle this case
by clearing the BAR to 0 depending on BARs based at 0 not decoding (which
is not guaranteed to be true). Now when a conflicting BAR is detected the
following steps are taken:
1) If hw.pci.realloc_bars (a new tunable) is enabled (default is enabled),
then ignore the current BAR setting from the firmware and attempt to
allocate a fresh resource range for the BAR.
2) If 1) failed (or was disabled), disable decoding for the relevant
BAR type (e.g. disable mem decoding for a memory BAR) and emit a
warning if booting verbose.
Tested by: Alex Keda <admin@lissyara.su>
MFC after: 1 week
devices. While at it, update the comment now that we know that MSI-X
doesn't work with ESXi 5.1 for Intel 82576 either and the underlying issue
is a bug in the MSI-X allocation code of the hypervisor.
Reported by: Harald Schmalzbauer
- Make the nomatch table const.
MFC after: 1 week
them, please let me know if not). Most of these are of the form:
static const struct bzzt_type {
[...list of members...]
} const bzzt_devs[] = {
[...list of initializers...]
};
The second const is unnecessary, as arrays cannot be modified anyway,
and if the elements are const, the whole thing is const automatically
(e.g. it is placed in .rodata).
I have verified this does not change the binary output of a full kernel
build (except for build timestamps embedded in the object files).
Reviewed by: yongari, marius
MFC after: 1 week
#defines. This also has the advantage that it makes the names more
compact, iand also allows us to correct the non-uniform naming of
the PCIM_LINK_* defines, making them all consistent amongst themselves.
This is a mostly mechanical rename:
s/PCIR_EXPRESS_/PCIER_/g
s/PCIM_EXP_/PCIEM_/g
s/PCIM_LINK_/PCIEM_LINK_/g
When this is MFC'd, #defines will be added for the old names to assist
out-of-tree drivers.
Discussed with: jhb
MFC after: 1 week
