Commit Graph

93 Commits

Author SHA1 Message Date
Andriy Voskoboinyk
6bda1ad8a2 rtwn_usb(4): add new USB id.
Submitted by:	<yklaxds@gmail.com>
Github issue:	https://github.com/s3erios/rtwn/issues/4
MFC after:	5 days
2019-01-28 02:15:41 +00:00
Andriy Voskoboinyk
b84b36380e Remove 2GHz channel list copies from wireless drivers.
Wrap ieee80211_add_channel_list_2ghz into another function
which supplies default (1-14) channel list to it and drop
its copies from drivers.

Checked with RTL8188EE, country US / JP / KR / UA.

MFC after:	2 weeks
2019-01-26 17:00:55 +00:00
Andriy Voskoboinyk
9df9e9361c net80211: reuse TICKS_2_MSEC / MSEC_2_TICKS macros from sys/time.h
Replace in-place implementation with system-wide one; since it
guarantees non-zero result drop all less-than-one checks from
drivers and net80211.

MFC after:	2 weeks
2019-01-25 01:05:18 +00:00
Andriy Voskoboinyk
8733962697 rtwn(4): clear 'basic' rate bit before calculating RTS/CTS rate.
Rate tables have this bit set to indicate minimal set of basic rates;
however, it overlappes with MCS bit, so rate2ridx() will treat them as
an 11n rate.

Due to the current rates setup the issue can be reproduced only
in 5GHz band with 11n / protection enabled.

Tested with RTL8821AU, HOSTAP mode.

MFC after:	5 days
2019-01-16 12:11:29 +00:00
Andriy Voskoboinyk
a461b7e5db rtwn_usb(4): add new USB id for RTL8821AU
Reported by:	Mike Tancsa <mike@sentex.net>
Tested by:	Mike Tancsa <mike@sentex.net>
MFC after:	3 days
2019-01-16 10:33:51 +00:00
Andriy Voskoboinyk
fdc9504f51 rtwn_usb(4): add IQ calibration support for RTL8192CU
The code is similar to the one for RTL8188E* and probably
should be shared with RTL8188CE (needs to be tested).

Checked with RTL8188CUS, STA mode.

MFC after:	5 days
2019-01-10 05:49:47 +00:00
Andriy Voskoboinyk
48f21a05da rtwn_pci(4): sync r88ee_power_on() with OpenBSD
Tested with RTL8188EE, STA mode

Submitted by:	Farhan Khan <khanzf@gmail.com>
MFC after:	3 days
Differential Revision:	https://reviews.freebsd.org/D18727
2019-01-04 04:26:39 +00:00
Andriy Voskoboinyk
920dfe026c rtwn_usb(4): add USB id for TP-LINK TL-WN821N v5.
It is already mentioned in manpage, but was missing from the driver.

MFC after:	4 days
2019-01-02 18:35:40 +00:00
Andriy Voskoboinyk
0fe1808c72 rtwn_pci(4): fix panic with INVARIANTS (due to inverted assertion logic)
MFC after:	4 days
2019-01-02 17:13:55 +00:00
Andriy Voskoboinyk
b3f3786e5d rtwn_pci(4): add support for RTL8188EE chipset.
Initially based on https://reviews.freebsd.org/D15692;
later deduplicated and improved a bit (Tx reports, IQ calibration support).

Submitted by:	Farhan Khan <khanzf@gmail.com>
MFC after:	4 days
Relnotes:	yes
Differential Revision:	https://reviews.freebsd.org/D15692
2019-01-02 06:48:53 +00:00
Andriy Voskoboinyk
a163403b62 rtwn(4): rename set_name -> set_rom_opts method and reuse it for RTL8188E*
MFC after:	4 days
2019-01-02 06:03:19 +00:00
Andriy Voskoboinyk
0db82209dc rtwn(4): rename common RTL8188E* structures.
No functional change intended.

MFC after:	4 days
2019-01-02 05:43:33 +00:00
Andriy Voskoboinyk
44c68782f1 rtwn(4): do not try to start RTL8188E* MCU during device shutdown.
MFC after:	4 days
2019-01-02 05:37:30 +00:00
Andriy Voskoboinyk
4e4bcfcfb7 Move USB-specific parts from rtwn(4) to rtwn_usb(4)
MFC after:	4 days
2019-01-02 05:30:41 +00:00
Andriy Voskoboinyk
17d5fbf21b rtwn_pci(4): add support for event-based Tx reports.
It will be used for RTL8188EE (and, probably, others).

MFC after:	4 days
2019-01-02 05:21:06 +00:00
Andriy Voskoboinyk
b5a81dd4c5 rtwn_pci(4): use proper bus_dmamap_sync flags after Tx (sync with r342672)
MFC after:	4 days
2019-01-02 04:56:36 +00:00
Andriy Voskoboinyk
5be70ac877 rtwn(4): drop obsolete comment + use 'nop' function for 92eu calibration
RTL8192EU was not tested with previously added code.

MFC after:	4 days
2019-01-02 04:27:39 +00:00
Andriy Voskoboinyk
58d3c148fd rtwn(4): add IQ calibration support for RTL8188E*
Tested with:
 * RTL8188EE, STA mode.
 * RTL8188EU, STA mode.

MFC after:	4 days
2019-01-02 04:19:28 +00:00
Andriy Voskoboinyk
db70ff37a0 rtwn(4): provide register definitions for RTL8188CE calibration routines.
No functional change intended.

MFC after:	4 days
2019-01-02 04:08:37 +00:00
Andriy Voskoboinyk
387c3f1495 rtwn_pci: fix excessive packet loss on Tx with RTL8188EE.
Use proper flags for bus_dmamap_sync() in Tx path.

Tested with:	RTL8188EE, STA mode

MFC after:	4 days
2019-01-01 23:41:16 +00:00
Andriy Voskoboinyk
b5a2424b58 Add revision number for TP-Link TL-WN722N to prevent ambiguity between
different chipsets.

MFC after:	3 days
X-MFC with:	341786
2018-12-17 05:07:57 +00:00
Andriy Voskoboinyk
3c3e1b0a98 Add new USB id in rtwn_usb(4) (RTL8812AU)
PR:		234029
Submitted by:	<hakotani000@gmail.com>
MFC after:	4 days
2018-12-15 14:58:45 +00:00
Andriy Voskoboinyk
98d2a76e37 rtwn, rsu: add more USB ids.
PR:		233638
Submitted by:	cezary.sliwa@gmail.com
MFC after:	3 days
2018-12-10 09:45:57 +00:00
Andriy Voskoboinyk
02e3fed58c rtwn(4): decode some bit fields + merge duplicate code.
Add macros for R12A_RXDMA_PRO register (descriptions were seen in the
RTL8822B vendor driver) and merge 2 r21au_init_burstlen() copies.

No functional change intended.
2018-06-19 00:38:28 +00:00
Matt Macy
d7c5a620e2 ifnet: Replace if_addr_lock rwlock with epoch + mutex
Run on LLNW canaries and tested by pho@

gallatin:
Using a 14-core, 28-HTT single socket E5-2697 v3 with a 40GbE MLX5
based ConnectX 4-LX NIC, I see an almost 12% improvement in received
packet rate, and a larger improvement in bytes delivered all the way
to userspace.

When the host receiving 64 streams of netperf -H $DUT -t UDP_STREAM -- -m 1,
I see, using nstat -I mce0 1 before the patch:

InMpps OMpps  InGbs  OGbs err TCP Est %CPU syscalls csw     irq GBfree
4.98   0.00   4.42   0.00 4235592     33   83.80 4720653 2149771   1235 247.32
4.73   0.00   4.20   0.00 4025260     33   82.99 4724900 2139833   1204 247.32
4.72   0.00   4.20   0.00 4035252     33   82.14 4719162 2132023   1264 247.32
4.71   0.00   4.21   0.00 4073206     33   83.68 4744973 2123317   1347 247.32
4.72   0.00   4.21   0.00 4061118     33   80.82 4713615 2188091   1490 247.32
4.72   0.00   4.21   0.00 4051675     33   85.29 4727399 2109011   1205 247.32
4.73   0.00   4.21   0.00 4039056     33   84.65 4724735 2102603   1053 247.32

After the patch

InMpps OMpps  InGbs  OGbs err TCP Est %CPU syscalls csw     irq GBfree
5.43   0.00   4.20   0.00 3313143     33   84.96 5434214 1900162   2656 245.51
5.43   0.00   4.20   0.00 3308527     33   85.24 5439695 1809382   2521 245.51
5.42   0.00   4.19   0.00 3316778     33   87.54 5416028 1805835   2256 245.51
5.42   0.00   4.19   0.00 3317673     33   90.44 5426044 1763056   2332 245.51
5.42   0.00   4.19   0.00 3314839     33   88.11 5435732 1792218   2499 245.52
5.44   0.00   4.19   0.00 3293228     33   91.84 5426301 1668597   2121 245.52

Similarly, netperf reports 230Mb/s before the patch, and 270Mb/s after the patch

Reviewed by:	gallatin
Sponsored by:	Limelight Networks
Differential Revision:	https://reviews.freebsd.org/D15366
2018-05-18 20:13:34 +00:00
Andriy Voskoboinyk
5f792f7478 rtwn(4): de-hardcode ('h/w rate index' - 'corresponding MCS index') constant 2018-03-16 01:03:10 +00:00
Andriy Voskoboinyk
8f1ef22fca rtwn(4): reset Tx power values before calling get_txpower()
for RTL8192C / RTL8188E (like it is done for other chipsets).
2018-03-10 23:47:03 +00:00
Adrian Chadd
9fbe631a1a [net80211] convert all of the WME use over to a temporary copy of WME info.
This removes the direct WME info access in the ieee80211com struct and instead
provides a method of fetching the data.  Right now it's a no-op but eventually
it'll turn into a per-VAP method for drivers that support it (eg iwn, iwm,
upcoming ath10k work) as things like p2p support require this kind of behaviour.

Tested:

* ath(4), STA and AP mode

TODO:

* yes, this is slightly stack size-y, but it is an important first step
  to get drivers migrated over to a sensible WME API.  A lot of per-phy things
  need to be converted to per-VAP before P2P, 11ac firmware, etc stuff shows up.
2018-01-02 00:07:28 +00:00
George V. Neville-Neil
b61cdf0e4e Add support for RealTek 8812 over USB
Tested with ALFA AWUS036ACH

MFC after:	1 week
2017-12-03 22:02:30 +00:00
Andriy Voskoboinyk
7e19293450 rtwn_usb(4): add few USB IDs.
Submitted by:	wfpower@yandex.ru (via github).
2017-10-30 08:57:08 +00:00
Andriy Voskoboinyk
0cc18edf18 rtwn(4): some initial preparations for (basic) VHT support.
Rename RTWN_RIDX_MCS to RTWN_RIDX_HT_MCS before adding 802.11ac
MCS rate indexes (they have different offset).

No functional change intended.
2017-08-28 22:14:16 +00:00
Andriy Voskoboinyk
ac1b5d811f rtwn(4): deduplicate r92c_write_txpower(). 2017-08-27 13:02:51 +00:00
Andriy Voskoboinyk
5c7083ce99 rtwn(4): change type for Tx power values (RTL8192C / RTL8188EU).
Tx power values can easily fit into uint8_t + only 8 bits are written
to registers; values may overflow only in case if ROM contains
malformed data (but limit is checked anyway).

Tested with RTL8188CUS, dev.rtwn.1.debug=0x2000 (no changes).
2017-08-27 12:44:56 +00:00
Andriy Voskoboinyk
9dba612805 rtwn_usb: add support for fragmented Rx.
Since device can pass multiple frames in a single payload temporary
Rx buffer was big enough to hold all of them; now the driver can
concatenate a single frame from multiple payloads.

The Rx buffer size may be configured via tunable (dev.rtwn.%d.rx_buf_size).

Tested with:
 - rtl8188cus, rtl8188eu and rtl8821au (STA mode).
 - (by kevlo) rtl8192cu and rtl8188eu.

PR:		218527
Reviewed by:	kevlo
Differential Revision:	https://reviews.freebsd.org/D11705
2017-07-30 23:35:21 +00:00
Andriy Voskoboinyk
ff97f477b9 rtwn: drop unnecessary / wrong conversion.
The 'chan' field occupies only one byte.
2017-07-30 21:50:45 +00:00
Andriy Voskoboinyk
c5ad99fc69 rtwn: add Rx descriptor structures for common code.
Remove any chipset specific usage of Rx descriptor structure / bits
from common code to prevent misuse of fields that may differ
between various chipsets.

Checked with: 	RTL8821AU in STA mode.
2017-07-06 07:37:33 +00:00
Andriy Voskoboinyk
3737697159 rtwn_usb: reject too long (>16K) mbufs.
While here move RTWN_TXBUFSZ constant from common to USB specific code
(it's not used anywhere else).
2017-07-04 07:07:08 +00:00
Kevin Lo
2cd325579c - Fix incorrect values in the computation of CCK and OFDM transmit power
for the rtl8188eu chipset
- Rename struct r92c_rom member names: s/channel_plan/reserved5/,
  s/xtal_calib/channel_plan to be compliant with definitions of the efuse
  in vendor hal_pg.h
2017-06-17 14:39:25 +00:00
Kevin Lo
a8cf90eb9a Change R88E_EFUSE_MAX_LEN to use the same value as the vendor's driver
that contains the length of the efuse content.

Reviewed by:	avos
2017-06-07 09:10:24 +00:00
Andriy Voskoboinyk
5acae76adf rtwn: drop obsolete (since r319460) code.
Tested with RTL8188EU, STA mode.
2017-06-01 21:20:44 +00:00
Andriy Voskoboinyk
59ed13aa49 rtwn: fix connection problems with 'options RTWN_WITHOUT_UCODE'
sc_set_media_status() callback may involve some generic code in addition to
firmware-specific part (e.g., link status register setup for RTL8188E);
so, remove 'RTWN_WITHOUT_UCODE' ifdefs around it.

Tested with RTL8188CUS, RTL8188EU and RTL8821AU, STA mode.
2017-05-28 22:51:06 +00:00
Andriy Voskoboinyk
8d4d46ffb6 rtwn_usb: fix build with 'options RTWN_WITHOUT_UCODE' 2017-05-28 22:38:19 +00:00
Andriy Voskoboinyk
6b322760df rtwn: remove out-of-bounds access + fix debug output.
Omit unused rates while initializing / dumping Tx power values.

They were not accessed anywhere (except for debugging), so this is
(mostly) no-op.

Tested with
 * RTL8188EU, STA mode.
 * RTL8812AU, STA mode.

Found by:	PVS-Studio
2017-04-12 07:21:54 +00:00
Andriy Voskoboinyk
90589b904f rtwn: fix node id assignment.
Do not assign new id if node is reused.

Tested with RTL8821AU, HOSTAP mode + RTL8188EU, STA mode
(with inactivity timeout == 90)
2017-03-20 08:10:35 +00:00
Andriy Voskoboinyk
2e184b72c3 rtwn: drop unneeded (after r315583) code.
Tested with RTL8188EU, HOSTAP mode + RTL8821AU, STA mode
(fast-frames / A-MSDU).
2017-03-19 20:51:28 +00:00
Andriy Voskoboinyk
f631357540 net80211 drivers: fix rate setup for EAPOL frames, obtain Tx parameters
directly from the node.

- Use ni_txparms directly instead of calculating them manually every time
- Move M_EAPOL flag check upper; otherwise it may be skipped due to
'ucastrate' / 'mcastrate' check
- Use 'mgtrate' for control frames too (see ifconfig(8), mgtrate parameter)
- Add few more M_EAPOL checks where it was missing (zyd(4), ural(4),
urtw(4))
- Few unrelated cleanups

Tested with:
 - Intel 6205 (iwn(4)), STA mode;
 - WUSB54GC (rum(4)), HOSTAP mode + RTL8188EU (rtwn(4)), STA mode.

Reviewed by:	adrian
Differential Revision:	https://reviews.freebsd.org/D9811
2017-02-26 20:49:35 +00:00
Kevin Lo
a6bac5b604 Sort REALTEK section and remove duplicate entry for RTL8192CU. 2017-01-24 03:00:22 +00:00
Kevin Lo
60b9567d16 Add support for the Realtek RTL8192EU chipset.
Committed over the D-Link DWA-131 rev E1 on amd64 with WPA.

Reviewed by:	avos
2017-01-24 02:35:38 +00:00
Andriy Voskoboinyk
3111723c09 rtwn: enable LDPC support where possible
Tested with RTL8821AU, STA mode.
2017-01-21 15:03:58 +00:00
Andriy Voskoboinyk
09606165a0 rtwn: export more stats to net80211
Setup more ieee80211_rx_stats fields for received frames:
 - pktflags:
  * IEEE80211_RX_F_FAIL_FCSCRC;
  * IEEE80211_RX_F_AMPDU;
  * IEEE80211_RX_F_AMPDU_MORE;
  * IEEE80211_RX_F_SHORTGI;
 - rate flags (CCK, OFDM, HT);
 - width;
 - phytype;
 - rate;
 - rx_tsf;
 - rssi;
 - nf;
 - ieee, freq (RTL8188EU only, when ht40 support is disabled).

Tested with:
 - RTL8188CE, RTL8188EU, RTL8821AU (STA / AP modes, i386)
 - (by kevlo) RTL8188EU and RTL8812AU (amd64)

Reviewed by:	adrian (previous version), kevlo
Differential Revision:	https://reviews.freebsd.org/D9021
2017-01-17 00:35:23 +00:00