This matches the return type of pmap_mapdev/bios.
Reviewed by: kib, markj
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D36548
This enables attachment on the RPI4, thus enabling the bcm2835_pwm
driver too. Per the device tree documentation, these compat strings are
equivalent, and no further changes to the driver are required.
https://lists.freebsd.org/archives/freebsd-arm/2021-June/000143.html
MFC after: 3 days
EXT_RESOURCES have been introduced in 12-CURRENT and all supported
releases have it enabled in their kernel config.
Reviewed by: kevans
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D33829
Add a new ioctl to vt to make it possible to export RGB offsets
set by vt drivers. This is needed to fix colors on X and Mesa
on some machines, especially on modern PowerPC64 BE ones.
With the appropriate changes in SCFB, to use this ioctl to find
out the correct RGB offsets, this fixes wrong colors on Talos II
and Blackbird, when used with their built-in video cards.
Reviewed by: alfredo
Sponsored by: Instituto de Pesquisas Eldorado (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D29000
When handling a data irq, the sdhci driver calls the
sdhci_platform_will_handle() method, to determine if it should allow the
platform driver to handle the transfer or fall back to programmed I/O.
While dumping, the data irq path may be invoked directly (not from an
interrupt context), which the bcm2835_sdhci DMA code is not prepared to
handle. Return early in this case, to force the fallback to PIO.
Otherwise, the KASSERT that follows will be triggered, and the dump will
fail. On non-INVARIANTS kernels, the system will hang, waiting for a DMA
interrupt that will never arrive.
Reviewed by: kevans
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D31893
Add generic mmc_helper which uses newly introduced device_*_property
api. Thanks to this change the sd/mmc drivers will be capable
of parsing both DT and ACPI description.
Ensure backward compatibility for all mmc_fdt_helper users.
Reviewed by: manu, mw
Sponsored by: Semihalf
Differential revision: https://reviews.freebsd.org/D31598
The hardware random number generator of the RPi4 differs slightly
from the version found on the RPi3.
This commit extends the existing bcm2835_rng driver to function on the RPi4.
Submitted by: James Mintram <me at jamesrm dot com>
Reviewed by: markm, cem, delphij
Approved by: csprng(cem, markm)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D22493
Fixes for Raspberry Pi 4B PCIe / USB:
- Pass through a DMA tag for the controller.
- In theory the controller can access the lower 3 GB, but testing found
that unreliable. OpenBSD also restricts DMA to the lowest 960 MiB.
- Rename some constants to be a bit more meaningful.
Submitted by: Robert Crowston, crowston at protonmail.com
Reviewed by: mkarels, outside reviewers
Differential Revision: https://reviews.freebsd.org/D26344
These exist on the Raspberry Pi 3 and 4 and control and external IO
expander.
Reviewed by: manu
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D25858
There are child nodes in the device tree, e.g. the Raspberry Pi firmware
GPIO device. Add support for this to be a bus so we can attach these
children.
Reviewed by: manu
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D25848
The newer hardware revisions of the Raspberry Pi 4 removed the ability of
the VIA VL805 xhci controller to load its own firmware. Instead the
firmware must be installed at the appropriate time by the VideoCore
coprocessor.
Submitted by: Robert Crowston <crowston_protonmail.com>
Differential Revision: https://reviews.freebsd.org/D25261
The Raspberry Pi GPIO config and state messages incorrectly return with
the tag length set to 0. We then check this value to have the response
flag set. Work around this by setting the response flag when setting the
GPIO config or state and this value is zero.
Sponsored by: Innovate UK
Use the new Raspberry Pi firmware driver in the cpufreq driver. It is
intended all drivers that need to interact with the firmware will move to
use the firmware driver, this is the first.
Reviewed by: manu
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D25609
It will be needed by other eaarly drivers.
While here make the dependency of the mailbox formal with MODULE_DEPEND.
Reviewed by: manu
Sponsored by: Innovate UK
The firmware driver uses the mailbox driver to communicate with the
firmware. Make this a more formal dependency.
Reviewed by: manu
Sponsored by: Innovate UK
This will be needed before a future GPIO controller driver is added
as the later enables regulators that leave the SDHCI controller disabled.
Reviewed by: manu
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D25834
Module name (unlike of the of driver name) must be system wide unique.
Reported by: Mark Millard(bcm_pci), andrew(mvebu_gpio)
MFC with: r362954, r362385
Communicating with the Raspberry Pi firmware is currently handled by each
driver calling into the mbox driver, however the device tree is structured
such that they should be calling into a firmware driver.
Add a driver for this node with an interface to communicate to the firmware
via the mbox interface.
There is a sysctl to get the firmware revision. This is a unix date so can
be parsed with:
root@generic:~ # date -j -f '%s' sysctl -n dev.bcm2835_firmware.0.revision
Tue Nov 19 16:40:28 UTC 2019
Reviewed by: manu
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D25572
This adds support for the Broadcom bcm2711 PCI express controller, found
on the Raspberry Pi 4 (aka the bcm2838 SoC). The driver has only been
developed against the soldered-on VIA XHCI controller and not tested
with other end points.
Submitted by: Robert Crowston <crowston_protonmail.com>
Differential Revision: https://reviews.freebsd.org/D25068
The Raspbery Pi computers do not properly implement PSCI. The canonical
way to reset them is to set a watchdog timer and allow it to expire.
Submitted by: Robert Crowston <crowston_protonmail.com>
Differential Revision: https://reviews.freebsd.org/D25268
The submitter notes that the bcm2835_cpufreq driver really just needs the
rpi4 compat string added to it; powerd subsequently works and the dev.cpu.0
sysctl values look sane and can be successfully manipulated.
Submitted by: James Mintram <me@jamesrm.com>
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D25349
r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly marked).
Use it in preparation for a general review of all nodes.
This is non-functional change that adds annotations to SYSCTL_NODE and
SYSCTL_PROC nodes using one of the soon-to-be-required flags.
Mark all obvious cases as MPSAFE. All entries that haven't been marked
as MPSAFE before are by default marked as NEEDGIANT
Approved by: kib (mentor, blanket)
Commented by: kib, gallatin, melifaro
Differential Revision: https://reviews.freebsd.org/D23718
Raspberry Pi are all over the board, and the reality is that there's no harm
in including all of the definitions by default but plenty of harm in the
current situation. This change is safe because we match a definition by root
/compatible in the FDT, so there will be no false-positives because of it.
The main array of definitions grows, but it's only walked exactly once to
determine which we need to use.
As far as I can tell, these are an artifact of times when linker sets
couldn't be empty, otherwise the kernel build would fail due to unresolved
symbols. hselasky fixed this in r268138, and I've audited the kbd portions
to make sure nothing would blow up due to the empty linker set and
successfully compiled+ran a kernel with no keyboard support at all.
Kill them off now since they're no longer required.
MFC after: 1 week
I've opted for just duplicating the two entries needed for this, rather than
writing any other mechanism for maintaining two root compat entries to map
to one config, for simplicity. We'll eventually declare these legacy DTB
unsupported, but let's not do that yet while there's no real burden.
We use armv7/GENERIC for the RPI2 images. The original RPI2 is actually a
32-bit BCM2836, but v1.2 was upgraded to the 64-bit BCM2837. The project
continues to provide the RPI2 image as armv7, as it's the lowest common
denominator of the two. Historically, we've just kind of implicitly
acknowledged this by including some bcm2837 bits on a SOC_BCM2836 kernel
config -- this worked until r354875 added code that actually cared.
Acknowledge formally that BCM2837 is valid in arm32.
This name is inconsistent with the other BCM* SOC on !arm64 for two reasons:
1. It's a pre-existing option on arm64, and
2. the naming convention on arm/ should've arguably changed to include BRCM
#1 seems to be a convincing enough argument to maintain the existing name
for it.
