Free allocated per-CPU structures in the pcpu_fini and finalize methods.
While here, add debug trace entries to these methods.
Reviewed by: jkoshy, andrew
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D41269
Free allocated per-CPU structures in the pcpu_fini and finalize methods.
While here, add debug trace entries to these methods.
Reviewed by: jkoshy, andrew
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D41268
The driver belabors the point about unsupported SFPs, printing multiple
times on link up. Limit it to once.
Reviewed by: markj
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D39785
This feature masks TSO capability when a link comes up at 10 or 100mbit
due to errata on the chips. This behavior matches previous versions of
FreeBSD as well as NetBSD and Linux.
A tunable, hw.em.unsupported_tso may be set if the admin desires to
disabling automasking and configure TSO settings manually.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D41170
Adds support for detection of the S3X NVMe controller found in the
13" MacBook Pro 2017 without Touch Bar (MacBook14,1)
It is known to be used in following MacBooks:
- Retina MacBook 2016 (MacBook9,1)
- 13" MacBook Pro 2016 without Touch Bar (MacBook13,1)
- 13" MacBook Pro 2016 with Touch Bar (MacBook13,2)
Also disable IPV6 checksum offload.
Spell hw->mac.type < e1000_82543 as e1000_82542. Confusingly, chips
like 82540 and 82541 come later and do not have these issues. There
is no functional change here, as the enum was defined in such a way
it worked correctly. But this reads literally.
MFC after: 1 week
Currently for the MFS, firmware and VDSO template assembly files we pass
the path to include with .incbin unquoted and use __XSTRING within the
assembly file to stringify it. However, __XSTRING doesn't just perform a
single level of expansion, it performs the normal full expansion of the
macro, and so if the path itself happens to tokenise to something that
includes a defined macro in it that will itself be substituted. For
example, with #define MACRO 1, a path like /path/containing/MACRO/in/it
will expand to /path/containing/1/in/it and then, when stringified, end
up as "/path/containing/1/in/it", not the intended string. Normally,
macros have names that start or end witih underscores and are unlikely
to appear in a tokenised path (even if technically they could), but now
that we've switched to GNU C as of commit ec41a96daa ("sys: Switch the
kernel's C standard from C99 to GNU99.") there are a few new macros
defined which don't start or end with underscores: unix, which is always
defined to 1, and i386, which is defined to 1 on i386. The former
probably doesn't appear in user paths in practice, but the latter has
been seen to and is likely quite common in the wild.
Fix this by defining the macro pre-quoted instead of using __XSTRING.
Note that technically we don't need to do this for vdso_wrap.S today as
all the paths passed to it are safe file names with no user-controlled
prefix but we should do it anyway for consistency and robustness against
future changes.
This allows make tinderbox to pass when built with source and object
directories inside ~/path-with-unix, which would otherwise expand to
~/path-with-1 and break.
PR: 272744
Fixes: ec41a96daa ("sys: Switch the kernel's C standard from C99 to GNU99.")
Explicitly set ipcss/ipcse/ipcso for IPv6 per intel SDM as indicated in
inline comments.
Fix and consolidate 82543/82547 hwcsum exemption.
While here rearrange and expand some commentary.
Ringing the doorbell before making the BPF call can result in the
mbuf being freed before the BPF call.
Reviewed-by: markj
MFC-after: 3 days
Differential Revision: https://reviews.freebsd.org/D41189
The ofw_reg_to_paddr() in this file is the powerpc OF_decode_addr()
formerly added in 812403402e. However,
the latter function in turn was based on the sparc64 counterpart I
previously added in 2b2250b149.
The reference to puc(9) is wrong; the page does not exist, and drivers
belong to section 4. Change the reference to puc(4), which does exist.
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
While at it, correct the string for 300 series ones, these also are
already xHCI 3.1.
Fixes: d171d2f2 Add AHCI/XHCI device IDs found on AMD Ryzen+B350 system
* em(4) obey administrative ifcaps for using hwcsum offload
* em(4) obey administrative ifcaps for hw vlan receive tagging
* em(4) add additional TSO6 ifcap, but disabled by default as is TSO4
* lem(4) obey administrative ifcaps for using hwcsum offload
* lem(4) add support for hw vlan receive tagging
* lem(4) Add ifcaps for TSO offload experimentation, but disabled by
default due to errata and possibly missing txrx code.
* lem(4) disable HWCSUM ifcaps by default on 82547 due to errata around
full duplex links. It may still be administratively enabled.
Reviewed by: markj (previous version)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D30072
Add CAM_NVME_STATUS_ERROR error code. Flag all NVME commands that
completed with an error status as CAM_NVME_STATUS_ERROR (a new value)
instaead of CAM_REQ_CMP_ERR. This indicates to the upper layers of CAM
that the 'cpl' field for nvmeio CCBs is valid and can be examined for
error recovery, if desired.
No functional change. nda will still see these as errors, call
ndaerror() to get the error recovery action, etc. cam_periph_error will
select the same case as before (even w/o the change, though the change
makes it explicit).
Sponsored by: Netflix
Reviewed by: chuck, mav, jhb
Differential Revision: https://reviews.freebsd.org/D41085
* em(4) obey administrative ifcaps for using hwcsum offload
* em(4) obey administrative ifcaps for hw vlan receive tagging
* em(4) add additional TSO6 ifcap, but disabled by default as is TSO4
* lem(4) obey administrative ifcaps for using hwcsum offload
* lem(4) add support for hw vlan receive tagging
* lem(4) Add ifcaps for TSO offload experimentation, but disabled by
default due to errata and possibly missing txrx code.
* lem(4) disable HWCSUM ifcaps by default on 82547 due to errata around
full duplex links. It may still be administratively enabled.
Reviewed by: markj (previous version)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D30072
Always set TXD_CMD_IP for 82544
Otherwise set TXD_CMD_IP for IPv4, not IPv6
Reviewed by: markj (previous version)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D30072
In some cases driver may ask FW about link state before FW finishes
configuration of a (Q)SFP+ transceiver. If first attempt of using Get Link
Status AQC after loading driver or handling a reset fails, then re-try
periodically for 5 seconds.
Signed-off-by: Krzysztof Galazka <krzysztof.galazka@intel.com>
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Tested by: jeffrey.e.pieper@intel.com
Approved by: erj@
MFC after: 2 days
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D40899
rid was stack garbage, so the bus_alloc_resource_any() call could fail
and fall through to the SMCCC version check even if a bridge had a
memory resource.
Debugging help: jrtc27
Reviewed by: jrtc27
Fixes: c9a05c0722 Add a PCI driver that follows the Arm DEN0115 spec
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D41025
Use autonegotiated link speed value while updating link status
to iflib.
This patch is part of change made in NetBSD kernel
by Masanobu Saitoh, NetBSD maintainer.
Differential Revision: https://reviews.freebsd.org/D19176
Approved by: erj
The default per-queue packet rate of 8000 will cause packet loss when
forwarding at 2.5G with a single stream, as is common when using e.g.
iperf3 to test a platform.
Bump this to 20000 (the "low latency" value in the Linux driver) which
avoids packet loss for this type of test.
Future work will use adaptive interrupt rate in a similar fashion
to the ixgbe driver.
Sponsored by: Rubicon Communications, LLC ("Netgate")
Reviewed by: erj, kp
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D40904
It points to non-existent documentation. The wiki page still contains a
useful overview, so keep this link.
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Rename isp_rd_2400_nvram to isp_rd_2xxx_flash.
Cleanup some leftovers.
Hide all output regarding FLT parsing behind ISP_LOGDEBUG0.
Thanks to imp@ and mav@ for reviewing and commenting.
PR: 271062
Reviewed by: imp, mav
Sponsored by: Technical University of Munich
Pull Request: https://github.com/freebsd/freebsd-src/pull/726
The ISP26xx based HBAs are left as is for now with static NVRAM addressing.
Those HBAs are known as 83xx (2031 and 8031 for real) and need special handling.
This is left for further investigation for now.
Cosmetics:
- rename functions and defines as they are no longer specific to 28xx
- set reasonable log levels
- sort FLT and NVRAM functions (in the order they are used)
Tested and approved to work on real hardware with:
- Qlogic ISP 2532 (QLogic QLE2562 8Gb 2Port FC Adapter)
- Qlogic ISP 2722 (QLogic QLE2690 16Gb FC Adapter)
- Qlogic ISP 2812 (QLogic QLE2772 32Gbit 2Port FC Adapter)
PR: 271062
Reviewed by: imp, mav
Sponsored by: Technical University of Munich
Pull Request: https://github.com/freebsd/freebsd-src/pull/726
The FLT is like a TOC for the flash area and contains entries for every flash
region with start/end address, size and flags.
Start using NVRAM addresses from FLT instead of hardcoded ones for ISP28xx
based HBAs.
The FLT should be available on earlier HBAs too, probably since ISP24xx based.
This needs further investigation and testing.
PR: 271062
Reviewed by: imp, mav
Sponsored by: Technical University of Munich
Pull Request: https://github.com/freebsd/freebsd-src/pull/726
Use correct NVRAM address for ISP28xx based HBAs to read NVRAM contents.
WWPN/WWNN and framesize are correctly read from NVRAM now.
PR: 271062
Reviewed by: imp, mav
Sponsored by: Technical University of Munich
Pull Request: https://github.com/freebsd/freebsd-src/pull/726
This covers the following HBAs:
ISP2812-based 64/32G Fibre Channel to PCIe Controller:
QLE2770 Single Port 32GFC PCIe Gen4 x8 Adapter
QLE2772 Dual Port 32GFC PCIe Gen4 x8 Adapter
QLE2870 Single Port 64GFC PCIe Gen4 x8 Adapter
QLE2872 Dual Port 64GFC PCIe Gen4 x8 Adapter
ISP2814-based 64/32G Fibre Channel to PCIe Controller:
QLE2774 Quad Port 32GFC PCIe Gen4 x16 Adapter
QLE2874 Quad Port 64GFC PCIe Gen4 x16 Adapter
While here, add required bits to support 64GB FC.
Default framesize is set to 2048 for ISP28xx based HBAs for now.
PR: 271062
Reviewed by: imp, mav
Sponsored by: Technical University of Munich
Pull Request: https://github.com/freebsd/freebsd-src/pull/726
In most cases, usage does not return, so mark them as __dead2. For the
cases where they do return, they have not been marked __dead2.
Reviewed by: imp
Pull Request: https://github.com/freebsd/freebsd-src/pull/735
Refactor to eliminate duplicated rate and delay tables, with minor style
tweaks for changed lines. Remove an obsolete comment about needing to
convert from microseconds to ticks (that's done elsewhere). Remove
traiing whitespace in kbdcontrol.c.
Except for the new warning, no change in behavior
Sponsored by: DSS GmbH
Reviewed by: imp [minor style tweaks as well]
Pull Request: https://github.com/freebsd/pull/683
Differential Revision: https://reviews.freebsd.org/D38818
To enable faster debug of customer issues Intel wants an end user to
gather information about PHY configuration and status to debug link and
connection issues in the field. For this reason the end user should
have possibility of obtaining PHYs registers values at runtime during
debugging.
Differential Revision: https://reviews.freebsd.org/D40354
Approved by: erj
Simply speaking, being started the drm-kmod driver should create sysfs helpers,
which is «drm» class devices, with the unit number 0, 128 and, perhaps 64.
If a drm helper created by vgapci driver with the corresponding unit number
exists then the drm-kmod driver initialize it by the device_initialize() lkpi
method, otherwise drm-kmod driver create new «drm» device.
For hw, where two or more different GPU installed, it's not guaranteed that
the order of loading GPU drivers will be the same as the vgapci devices numbered.
I.e., on hw where vgapci0 is Nvidia GPU and vgapci1 is Intel GPU, when drm-kmod
loaded first it will use drm0 helper of vgapci0 device.
There is no problem for drm-kmod driver unless we do not traverse device
tree, as needed for https://reviews.freebsd.org/D38545.
drm-kmod is ok for this change as it has fallback to create corresponding
drm device.
Reviewed by:
Differential Revision: https://reviews.freebsd.org/D38546
- Add new DB_DEFINE_TABLE and DB_DECLARE_TABLE macros to define new
command tables. DB_DECLARE_TABLE is intended for use in headers
similar to MALLOC_DECLARE and SYSCTL_DECL.
DB_DEFINE_TABLE takes three arguments, the name of the parent table,
the command name, and the name of the table itself, e.g.
DB_DEFINE_TABLE(show, foo, show_foo) defines a new "show foo" table.
- DB_TABLE_COMMAND, DB_TABLE_COMMAND_FLAGS, DB_TABLE_ALIAS, and
DB_ALIAS_FLAGS allow new commands and aliases to be defined. These
are similar to the existing DB_COMMAND, etc. except that they take
an initial argument giving the name of the parent table, e.g.:
DB_TABLE_COMMAND(show_foo, bar, db_show_foo_bar)
defines a new "show foo bar" command.
This provides a cleaner interface than the ad-hoc use of internal
macros like _DB_SET that was required previously (e.g. in cxgbe(4)).
This retires DB_FUNC macro as well as the internal _DB_FUNC macro.
Reviewed by: melifaro, kib, markj
Differential Revision: https://reviews.freebsd.org/D40819
Add support for LAN port found on Thinkpad Hybrid USB-C with USB-A dock.
While here fix a small typo
- s/UBS/USB/
Sponsored by: Technical University of Munich
Reviewed by: markj
MFC after: 2 weeks
Pull Request: https://github.com/freebsd/freebsd-src/pull/791
Bug Fixes:
* Initialize statistics before the interface is available
* Fix driver unload crash
Minor Changes:
* Mechanically convert ena(4) to DrvAPI
* Remove usage of IFF_KNOWSEPOCH
MFC after: 2 weeks
Sponsored by: Amazon, Inc.
When ena_detach is called, we first call ether_ifdetach(),
which destroys internal addresses of ifp. One such address
is ifp->if_addr->ifa_addr. Then during ena_destroy_device(),
if_link_state_change() is called, eventually trying to access
ifp->if_addr->ifa_addr->sa_family. This causes an access
to garbage memory and crashes the kernel.
Ticket [1] was opened to the FreeBSD community to add null
check in the code of if_link_state_change().
A fix was submitted in commit [2], however it was noted
that it is our driver's responsibilty to not call
if_link_state_change() after calling ether_ifdetach().
This commit makes sure if_link_state_change() is not called
after ether_ifdetach().
[1]: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=270813
[2]: https://reviews.freebsd.org/D39614
Fixes: 32f63fa7f9 ("Split ENA reset routine into restore and destroy stages")
MFC after: 2 weeks
Sponsored by: Amazon, Inc.
In [1], the FBSD community exposed a bug in the fbsd/ena driver.
Bug description:
----------------
Current function call order is as follows:
1. ena_attach()
1.1. ena_setup_ifnet()
1.1.1. Registration of ena_get_counter()
1.1.2. ether_ifattach(ifp, adapter->mac_addr);
1.2. Statistics allocation and initialization.
At point 1.1.2, when ether_ifattach() returns, the interface is available,
and stats can be read before they are allocated, leading to kernel panic.
Also fixed a potential memory leak by freeing the stats since they were
not freed in case the following calls failed.
Fix:
----
This commit moves the statistics allocation and initialization to happen
before ena_setup_ifnet()
[1] https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=268934
Fixes: 9b8d05b8ac ("Add support for Amazon Elastic Network Adapter (ENA) NIC")
Fixes: 30217e2dff ("Rework counting of hardware statistics in ENA driver")
MFC after: 2 weeks
Sponsored by: Amazon, Inc.
- Increase verbosity to direct i/o code path (iores != 0)
- Fix pin inversion configuration
- Allow forcing the use of indirect access channel via hint.gpio.0.flags=2
- Document the PREFER_INDIRECT_CHANNEL tunable in nctgpio(4)
Reviewed by: imp
Pull Request: https://github.com/freebsd/freebsd-src/pull/719
Add some extra files for building the driver as part of the kernel.
Change some #defines to match those used when building as a module.
PR: 268354
Signed-off-by: Mark O'Donovan <shiftee@posteo.net>
Reviewed by: imp
Pull Request: https://github.com/freebsd/freebsd-src/pull/779
I do not know why this is here but it blocks compilation.
Removing it makes the builtin option the same as the module build
Signed-off-by: Mark O'Donovan <shiftee@posteo.net>
Reviewed by: imp
Pull Request: https://github.com/freebsd/freebsd-src/pull/779
internal_ram_wr() only takes 3 args when ECORE_CONFIG_DIRECT_HWFN
is defined
Signed-off-by: Mark O'Donovan <shiftee@posteo.net>
Reviewed by: imp
Pull Request: https://github.com/freebsd/freebsd-src/pull/779
SRIOV is being enabled in ecore.h but by then
the qlnx_os.h header has been processed and not
included the relevant headers
Signed-off-by: Mark O'Donovan <shiftee@posteo.net>
Reviewed by: imp
Pull Request: https://github.com/freebsd/freebsd-src/pull/779
Older Chromebooks have issues in their embedded controller (EC) firmware
which need working around in atkbd and atkbdc. On these systems, rather
than use a standard EC, Google used their own arm-based EC. For a while,
its firmware incorrectly implemented the i8042, requiring workaroundsd
in the driver.
Implement a heuristic recommended by MrChromebox <mrchromebox@gmail.com>
to detect them: If the bios.version starts with Google_, or the maker is
either Google or GOOGLE, assume that it's a chromebook with the affected
bios. While this isn't strictly true, the number of updated systems
without the bug is very small and this will exclude all the non-Google
coreboot user that use a standard EC. There's no simple way to test the
hardware to see if it's implemented with the buggy EC.
Sponsored by: Netflix
Reviewed by: jon@thesoo.org, MrChromebox
Differential Revision: https://reviews.freebsd.org/D40789
The DMA scatter/gather list for mrsas passthrough ioctl commands is
stored in a SGL at the end of the DCMD frame. Given the SGL member at
the end of the DCMD frame it seems likely this S/G list is formatted
as a fixed-width structure such as the type mrsas_sge64 and not as a
iovec which contains a kernel pointer and length that vary with the
native architecture size.
Reviewed by: imp
Obtained from: CheriBSD
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D40727
On Purism coreboot systems the quirks mode in atkbdc prevents built in
Keyboard from being used. Add quirk to prevent that.
MFC After: 2 weeks
PR: 271737
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D40405
- Replace a magic number with CTS_NVME_VALID_SPEC.
- Set the transport and protocol versions the same as for XPT_PATH_INQ.
Probably we shouldn't bother with setting the version in the 'spec'
member of ccb_trans_settings_nvme at all and use the transport
and/or protocol version field instead.
Reviewed by: chuck, imp
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D40616
The ichsmb driver does not actually handle SMBALERT, other than by logging the
first 16 occurences of the ICH_HST_STA_SMBALERT_STS_SMBALERT status
flag. Because the SMBALERT is not acknowledged by the host, clearing it in the
host status register does not appear to work as long as some slave device is
pulling the SMBALERT line low, at least for C2000 chips. As a result, if a slave
device does pull SMBALERT low the interrupt handler will always loop its maximum
of 16 times attempting to clear all status register flags and device_printf the
status register. The result is the kernel message buffer is littered with these
device_printfs at every interrupt.
To remedy the problem, the ICH_HST_STA_SMBALERT_STS flag is zeroed in the read
host status register value, just as with ICH_HST_STA_INUSE_STS and
ICH_HST_STA_HOST_BUSY. This allows the loop to break when no other flags that
must be handled are set in the host status register. Additionally, because the
SMBALERT is not actually handled the SMBALERT logging is omitted as it has no
actual function at this time.
Reviewed by: imp
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D39966
If MOD_LOAD fails, then MOD_UNLOAD will be called to unwind module
state, but wg_module_init() will have already deinitialized everything
it needs to in a manner that renders it unsafe to call MOD_UNLOAD
after (e.g., freed zone not reset to NULL, wg_osd_jail_slot not reset
to 0). Let's simply stop trying to handle freeing everything in
wg_module_init() to simplify it; let the subsequent MOD_UNLOAD deal with
it, and let's make that robust against partially-constructed state.
jhb@ notes that MOD_UNLOAD being called if MOD_LOAD fails is kind of an
anomaly that doesn't match other paradigms in the kernel; e.g., if
device_attach() fails, we don't invoke device_detach(). It's likely
that a future commit will revert this and instead stop calling
MOD_UNLOAD if MOD_LOAD fails, expecting modules to clean up after
themselves in MOD_LOAD upon failure. Some other modules already do this
and may see similar problems to the wg module (see: carp). The proper
fix is decidedly a bit too invasive to do this close to 14 branching,
and it requires auditing all kmods (base + ports) for potential leaks.
PR: 272089
Reviewed by: emaste
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D40708
Previously we'd jump to the `free_crypto` label, but never set `ret` to
a failure value -- it would retain success from the call just prior.
Set ret up properly.
This is part of D40708, but not the main point of the change.
We kept le(4) in the pre-12.0 purge because it was needed for Qemu/MIPS
(virtio networking didn't work) but the MIPS port has been removed.
Reviewed by: emaste
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D40683
This update contains a rewrite of the VPD parser based on the
definition of the structure of the VPD data (ident, R/O resource
data, optional R/W data, end tag).
The parser it replaces was based on a state machine, with the tags
and the parsed data controlling the state changes. The flexibility
of this parser is actually not required, and it has caused kernel
panics when operating on malformed data.
Analysis of the VPD code to make it more robust lead me to believe
that it was easier to write a "strict" parser than to restrict the
flexible state machine to detect and reject non-well-formed data.
A number of restrictions had already been added, but they make the
state machine ever more complex and harder to understand.
This updated parser has been verified to return identical parsed data
as the current implementation for the example VPD data given in the
PCI standard and in some actual PCIe VPD data.
It is strict in the sense that it detects and rejects any deviation
from a well-formed VPD structure.
PR: 272018
Approved by: kib
MFC after: 4 weeks
Differential Revision: https://reviews.freebsd.org/D34268
When running VM on ARM64 Hyper-V, we have seen netvsc/hn driver hit
assert on reading duplicated network completion packets over vmbus
channel or one of the tx channels stalls completely. This seems to
caused by processor reordering the instructions when vmbus driver
reading or updating its channel ring buffer indexes.
Fix this by using load acquire and store release instructions to
enforce the order of these memory accesses.
PR: 271764
Reported by: Souradeep Chakrabarti <schakrabarti@microsoft.com>
Reviewed by: Souradeep Chakrabarti <schakrabarti@microsoft.com>
Tested by: whu
Sponsored by: Microsoft
Previously every file that included mpi3mr_app.h but did not use
mpi3mr_mgmt_info reported error: 'mpi3mr_mgmt_info' defined but not
used.
Fixes: 2d1d418e1e ("mpi3mr: 3rd Generation Tri-Mode NVMe/SAS/SATA...")
Reported by: amd64-gcc12 Cirrus-CI job
Sponsored by: The FreeBSD Foundation
This is required for pci_alloc_msix() to work and to thus use
MSI-X interrupts for PCI-e hotplug.
Reported by: cperciva
Reviewed by: cperciva
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D40581
The Emulex OneConnect NIC driver hasn't seen any commits other than ioctl
bug fixes (some severe) and sweeping commits since 2016. There is no
indication of new parts since 2014 or earlier. As such, deprecate the
driver with the aim of removing it prior to FreeBSD 15.
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D40531
Replace direct stores to userspace addresses (never safe and broken on
modern CPUs) with a copyout. Use a static assert on the size to ensure
we don't overflow the field.
Reviewed by: markj, jhb
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D40519
This is Broadcom's mpi3mr driver for FreeBSD version 8.6.0.2.0.
The mpi3mr driver supports Broadcom SAS4116-based cards in the 9600
series: 9670W-16i, 9670-24i, 9660-16i, 9620-16i, 9600-24i, 9600-16i,
9600W-16e, 9600-16e, 9600-8i8e.
Initially only available as a module and on amd64/arm64, since that's
how it has been tested to date. Future commits will add it to the kernel
build and may expand the architectures it is supported on.
Co-authored-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com>
Feedback-by: ken (prior versions)
Reviewed-by: imp
RelNotes: yes
Differential-Revision: https://reviews.freebsd.org/D36771
Differential-Revision: https://reviews.freebsd.org/D36772
Use a goto to clarify the control flow when there is no process
descriptor. This wins back a level of indentation.
No functional change intended.
Reviewed by: jkoshy
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D40518
Split out the functional logic from the syscall handler into a helper
function. This keeps it separate from the syscall control-flow logic,
resulting in better readability overall. It also wins back a level of
indentation.
Reviewed by: jkoshy
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D40294
Split out the functional logic from the syscall handler into a helper
function. This keeps it separate from the syscall control-flow logic,
resulting in better readability overall. It also wins back a level of
indentation.
Reviewed by: jkoshy
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D40293
Split out the large chunk of functional logic from the syscall handler
into a helper function. This keeps it separate from the syscall
control-flow logic, resulting in better readability overall. It also
wins back a level of indentation.
Flip the return values of the pmc_can_allocate_row() and
pmc_can_allocate_rowindex() functions to boolean types, like their
naming implies. We weren't actually using the error codes they were
returning.
While here, make some small style cleanups. No functional change
intended.
Reviewed by: jkoshy
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D40292
Begin splitting out the large chunks of functional logic from the
syscall handler into separate helper functions. This keeps it separate
from the syscall control-flow logic, resulting in better readability
overall. It also wins back a level of indentation.
For this and the similar changes to follow, try to keep copyin() and
copyout() calls outside of the helper functions. The changes are
intended to have no functional impact, but do address style issues.
Reviewed by: jkoshy
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D40291
Move the functionality into a separate helper function. All other
actions in pmc_hook_handler() already have this.
While here make some small style improvements. Restructure one for loop.
Reviewed by: jkoshy
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D40333
Everything else I found worthy of adjustment.
- Order local variable declarations per style(9)
- Make use of __unused annotations rather than cast to void
- Remove unnecessary casts
- Add (void) casts to PMC class methods where the return value is
ignored
- A couple instances of reordering statements for clarity
- Prefer bool type where applicable
- unsigned int -> u_int
- Use uintmax_t/%j in printf calls
- Formatting of comments
Reviewed by: jkoshy
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D40517
- Explicitly check the value in conditional statements, per style(9)
- Add braces around more loops and conditionals, wherever it appears
(to me) to aid legibility
- Expand some assignments within if statements
- Fix formatting around list-type FOREACH macros
Reviewed by: jkoshy
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D40515
Handle a few things related to spacing:
- Remove redundant/superfluous blank lines (and add a couple where
helpful)
- Add spacing around binary operators
- Remove spacing after casts and before goto labels
- Adjustments for line width of 80 chars
- Tab/space character issues
Reviewed by: jkoshy
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D40514
We already run nda by default on all the !x86 architectures. Switch the
default to nda. nda created nvd compatibility links by default, so this
should be a nop. If this causes problems for your application, set
hw.nvme.use_nvd=1 in your loader.conf.
Sponsored by: Netflix
Vmbus_synic_setup() is invoked via vmbus_intrhook -> vmbus_doattach
-> smp_rendezvous. On !EARLY_AP_STARTUP (e.g., aarch64), SMP isn't
functional in intrhooks and smp_rendezvous() will just call
vmbus_synic_setup() on the boot processor. There's nothing that will
initialize the pcpu data on every other AP.
To fix it we need to use SI_SUB_SMP for vmbus_doattach(). With this
patch the vmbus interrupt should work on all arm64 cpus on HyperV.
Reported by: kevans
Reviewed by: kevans, whu
Tested by: Souradeep Chakrabarti <schakrabarti@microsoft.com>
Obtained from: Souradeep Chakrabarti <schakrabarti@microsoft.com>
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D40279
While there, also make MODULE_PNP_INFO to reflect that the device
description is provided.
Reported-by: jrtc27
Reviewed-by: jrtc27, imp
Differential Revision: https://reviews.freebsd.org/D40430
In the Hyper-V drivers we need to allocate buffers shared between the
host and guest. This memory has been allocated with bus_dma, however
it doesn't use this correctly, e.g. it is missing calls to
bus_dmamap_sync. Along with this on arm64 we need this memory to be
mapped with the correct memory type that bus_dma may not use.
Switch to contigmalloc to allocate this memory as this will correctly
allocate cacheable memory.
Reviewed by: Souradeep Chakrabarti <schakrabarti@microsoft.com>
Sponsored by: Arm Ltd
Differential Revision: https://reviews.freebsd.org/D40227
gVNIC is a virtual network interface designed specifically for
Google Compute Engine (GCE). It is required to support per-VM Tier_1
networking performance, and for using certain VM shapes on GCE.
The NIC supports TSO, Rx and Tx checksum offloads, and RSS.
It does not currently do hardware LRO, and thus the software-LRO
in the host is used instead. It also supports jumbo frames.
For each queue, the driver negotiates a set of pages with the NIC to
serve as a fixed bounce buffer, this precludes the use of iflib.
Reviewed-by: markj
MFC-after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D39873
Currently the PROCEXEC event only reports a single address, entryaddr,
which is the entry point of the interpreter in the typical dynamic case,
and used solely to calculate the base address of the interpreter. For
PDEs this is fine, since the base address is known from the program
headers, but for PIEs the base address varies at run time based on where
the kernel chooses to load it, and so pmcstat has no way of knowing the
real address ranges for the executable. This was less of an issue in the
past since PIEs were rare, but now they're on by default on 64-bit
architectures it's more of a problem.
To solve this, pass through what was picked for et_dyn_addr by the
kernel, and use that as the offset for the executable's start address
just as is done for everything in the kernel. Since we're changing this
interface, sanitise the way we determine the interpreter's base address
by passing it through directly rather than indirectly via the entry
point and having to subtract off whatever the ELF header's e_entry is
(and anything that wants the entry point in future can still add that
back on as needed; this merely changes the interface to directly provide
the underlying variables involved).
This will be followed up by a bump to the pmc major version.
Reviewed by: jhb
Differential Revision: https://reviews.freebsd.org/D39595
This unifies the user object and kernel module paths in libpmcstat,
allows modules loaded from non-standard locations (e.g. from a user's
home directory when testing) to be found and, since buffer is what all
the warnings here use (they were never updated when buffer_modules were
added to pick based on where the file was found) has the side-effect of
ensuring the messages are correct.
This includes obsoleting the now-superfluous -k option in pmcstat.
This change breaks the hwpmc ABI and will be followed by a bump to the
pmc major version.
Reviewed by: jhb, jkoshy, mhorne
Differential Revision: https://reviews.freebsd.org/D40048
Whilst the former is not breaking, the latter is, and so this will be
followed by a bump to the pmc major version. This will allow the flags
to actually be usable in future, as otherwise we cannot distinguish
uninitialised stack junk from a deliberately-initialised value.
Reviewed by: jhb, mhorne
Differential Revision: https://reviews.freebsd.org/D40049
Since commit ecaecbc7d8, calling
ofw_bus_gen_setup_devinfo() is redundant, as the call to
device_set_ivars() now happens inside simplebus_add_device().
Reviewed by: markj
Approved by: markj (mentor)
Differential Revision: https://reviews.freebsd.org/D40271
This driver update has no corresponding ice_ddp update, and doesn't
contain very many functional changes:
- Some refactoring for future SR-IOV PF support
- Various minor fixes
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Tested by: jeffrey.e.pieper@intel.com
MFC after: 1 week
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D39821
This patch fixes TCP connection hangs for 1 rxq and 1 txq without rxcsum
enabled. Documentation for 10G cards and other drivers suggest enabling
rxcsum for RSS and disabling otherwise. When PCSD bit is not set then
fragment checksum and IP identification are reported in the rx
descriptor. When PCSD bit is set then RSS hash value is reported in the
rx descriptor. RSS and RX IPP checksum are mutually exclusive.
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
PR: 268910
Reviewed by: erj@
Tested by: jeffrey.e.pieper@intel.com
MFC after: 1 week
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D38621
We already do plenty to announce the different CPUs in dmesg. Follow the
ACPI CPU strategy of reporting the first CPU device, but quieting the
rest for non-verbose boot. This cuts down slightly on dmesg output.
Reviewed by: manu, jhb
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D40243
The zone is used solely to provide KVA for mapping BIOs so that we can
pass mapped buffers to VOP_READ and VOP_WRITE. Currently we preallocate
nswbuf/10 bufs for this purpose during boot.
The intent was to limit KVA usage on 32-bit systems, but the
preallocation means that we in fact consumed more KVA than needed unless
one has more than nswbuf/10 (typically 25) vnode-backed MD devices
in existence, which I would argue is the uncommon case.
Meanwhile, all I/O to an MD is handled by a dedicated thread, so we can
instead simply preallocate the KVA region at MD device creation time.
Event: BSDCan 2023
Reviewed by: kib
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D40215
Move static mutex declaration outside function body, to avoid global
variables being declared on the stack, when using SYSINITs.
MFC after: 1 week
Sponsored by: NVIDIA Networking
After removing the -FreeBSD and -NetBSD, we're left with a nuber of
BSD-2-Clause AND BSD-2-Clause, so tidy that up.
Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix
The SPDX folks have obsoleted the BSD-2-Clause-NetBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.
Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix
The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.
Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix
VLAN 0 essentially means "Treat as untagged, but with priority bits",
and is used by some ISPs.
On igb/em interfaces we did not receive packets with VLAN tag 0 unless
vlanhwfilter was disabled.
This can be fixed by explicitly listing VLAN 0 in the hardware VLAN
filter (VFTA). Do this from em_setup_vlan_hw_support(), where we already
(re-)write the VFTA.
Reviewed by: kbowling
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D40046
This reverts commit d1b6271118.
I've received multiple reports of machines failing to boot with
this hardware; back it out for now until we can fix it.
PR: 271147
MFC after: Morning coffee
In many cases this avoids an extra lookup, since the callers always have
pm at hand. We can also eliminate several assertions, mostly for pm !=
NULL. The class methods are an internal interface, and the callers
already handle such a scenario. No functional change intended.
Reviewed by: jkoshy
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D39915
These are preferred over casts to void. No functional change.
Reviewed by: jkoshy
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D39914
Most platforms (non-x86) don't require these methods and implement stub
versions. If we initialize the pmc_mdep structure to always point to the
generic versions, then we can purge the duplicate stubs.
Reviewed by: jkoshy
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D39913
These are unused on all platforms.
Reviewed by: jkoshy, emaste
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D39912
Provide the log type names in their entirely, rather than relying on the
macro to prepend the prefix. This improves their searchability; for
example, if I see PMCLOG_TYPE_PMCALLOCATE in libpmc I will now be able
to find where that is emitted in the kernel with a simple grep.
Reviewed by: jkoshy, emaste
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D39911
It is just wrapper around strlcpy(), but results in more complicated
code. Clean this up to use strlcpy() or snprintf() as appropriate.
Reviewed by: jkoshy
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D39910
This existing helper function is preferable to the hand-rolled
calculation of the kstack bounds.
Make some small style improvements while here. Notably, rename every
instance of "r", the return address, to "ra". Tidy the includes in the
affected files.
Reviewed by: jkoshy
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D39909
