When using 16k or 64k pages atop will shift the address by more than
the needed amount for a tlbi instruction. Replace this with a new macro
to shift the address by 12 and use PAGE_SIZE in the for loop to let the
code work with any page size.
Reviewed by: alc, markj
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D34516
Adding it in order to make easier using powerpcspe images under qemu
Reviewed by: jhibbits
Sponsored by: Instituto de Pesquisas Eldorado (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D34554
To allow for a future 16k or 64k page size we need to tell libkvm which
is being used. Add a flag field in unused space in minidumphdr and use
it to signal between the different options.
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D34548
When moving from the l1 index to l0 index we need to use the l1 shift
value not the l0 shift value. With 4k pages they are identical, however
with 16k pages we only have 2 l0 entries so the shift value is incorrect.
Reviewed by: alc, markj
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D34517
/usr/freebsd-dist is used used by various programs as the location for
FreeBSD distribution files. In-tree programs following this convention
are bsdinstall(8) and release(7).
Reviewed by: Pau Amma <pauamma@gundo.com>
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D34552
Currently RSC offloading is enabled by default.
With this new change rsc will be disabled by default.
By using sysctl we can enable and disable it.
Reviewed by: whu
Signed-off-by: Souradeep Chakrabarti <schakrabarti@microsoft.com>
Fixes: a491581f3f Enable vSwitch RSC support in hn netvsc driver
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D34507
Allow filtering based on the source or destination IP/IPv6 address in
the Ethernet layer rules.
Reviewed by: pauamma_gundo.com (man), debdrup (man)
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D34482
Use nanotime instread of binuptime.
This change is for old and legacy platforms and does not impact any armv7 and later.
Might be MFCed to 13.0 once armv6 support is finally dropped in 14.0
Sponsored by: Stormshield
Reviewed by: mw
Obtained from: Semihalf
Differential revision: https://reviews.freebsd.org/D33719
Use of the Lookup+Open RPC is currently disabled,
due to a problem detected during testing. This
patch fixes this problem. The problem was that
nfscl_postop_attr() does not parse the attributes
if nd_repstat != 0. It also would parse the
return status for the operation, where the
Lookup+Open code had already parsed it.
The first change in the patch does not make any
semantics change, but makes the code identical
to what is done later in the function, so that
it is apparent that the semantics should be the
same in both places.
Lookup+Open remains disabled while further
testing is being done, so this patch has no
effect at this time.
By rc.conf(5), setting rc_startmsgs="NO" should silence start messages.
Fix a few rc scripts by using startmsg.
PR: 255207
Reported by: Jose Luis Duran <jlduran@gmail.com>
Reviewed by: imp, 0mp
Approved by: imp (src)
Differential Revision: https://reviews.freebsd.org/D34514
startmsg is a new rc.subr(8) function function to be used instead of
echo(1) when for boot messages. It replaces the often forgotten
check_startmsgs && echo ...
with
startmsg ...
No functional change intended.
I adjusted the commit message and did some final clean-ups of the patch
before committing.
PR: 255207
Reported by: Jose Luis Duran <jlduran@gmail.com>
Reviewed by: imp, 0mp
Approved by: imp (src)
Differential Revision: https://reviews.freebsd.org/D34514
FreeBSD 14.0 is going to ship with a new implementation of the mixer(8)
command. Unfortunately, in order to support new features like mute, the
command-line interface of the new implementation is not backwards
compatible.
Update all the remaining documentation and scripts in the src tree
to use the new syntax.
While here, document in usbhidaction.1 that the mute functionality is
now supported.
Reviewed by: christos, debdrup, hselasky
Approved by: hselasky (src)
Fixes: 903873ce15 Implement and use new mixer(3) library for FreeBSD.
Differential Revision: https://reviews.freebsd.org/D34545
When there are multiple devices sharing the same USB vendor and product ID,
the wrong device may be selected. Fix this by also matching the bus and
device address, ugen<X>.<Y> .
MFC after: 1 week
Sponsored by: NVIDIA Networking
- Use correct macros (e.g., Pa for paths, Ar for arguments, Cm for
command modifiers).
- Pet igor and mandoc -Tlint (e.g., start sentences after a newline).
- Use Ta instead of a tab character in tables.
- Stylize all table headers with Sy consistency.
- Add a missing "vol" variant to the synopsis of "dev.volume".
- Sort dev.recsrc command modifiers consistency.
- Use "Bd -literal" for code blocks in the examples. "Bl -tag" is not
the right macro for that.
Fixes: 903873ce15 Implement and use new mixer(3) library for FreeBSD.
This version provides improvements and fixes mainly to use bsddialog
utility in bsdinstall/scripts. The lib API is not broken so the
previous converted utilities (tzsetup, distextract, etc.) are OK.
Approved by: bapt (mentor)
Differential Revision: https://reviews.freebsd.org/D34458
Traditionally the GEOM's primary channel of information from kernel to
user-space was confxml, fetched by libgeom through kern.geom.confxml
sysctl. It is convenient and informative, representing full state of
GEOM in a single XML document. But problems start to arise on systems
with hundreds of disks, where the full confxml size reaches many
megabytes, taking significant time to first write it and then parse.
This patch introduces alternative solution, allowing to fetch much
smaller XML document, subset of the full confxml, limited to 64KB and
representing only one specified geom and optionally its parents. It
uses existing GEOM control interface, extended with new "getxml" verb.
In case of any error, such as the buffer overflow, it just transparently
falls back to traditional full confxml. This patch uses the new API in
user-space GEOM tools where it is possible.
Reviewed by: imp
MFC after: 2 month
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D34529
The boot time entry doesn't have a tty specified, so don't check it.
While here, make ttystat handle that case.
Approved by: kevans (src)
Differential Revision: https://reviews.freebsd.org/D34524
Preferably bcmp would just alias memcmp but there is build magic which
makes this problematic.
Reviewed by: jhb
Differential Revision: https://reviews.freebsd.org/D28846
The console escape code standard (ECMA-48) specifies color #3 (escape
code 33) as yellow. A brown console color is an artifact of the VGA
palette, which replaces dim (but not bright) yellow with brown.
Reviewed by: adrian, imp
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D34531
clang fails to take advantage of the fact that majority of the struct
gets written to in the routine and decides to bzero the entire thing.
Explicitly zero padding and spare fields, relying on KMSAN to catch
problems should anything pop up later which also needs explicit
zeroing.
fstat on tmpfs (ops/s):
before: 8216636
after: 8508033
If fstat(2) fails the close(2) won't be called, which will leak the
file descriptor.
The idea was borrowed from OpenBSD, where similar patch
was applied for futimens(2).
MFC after: 1 week
For historical reasons console color number 3 may be either yellow (most
consoles) or brown (VGA palette). The console escape code standard
uses "yellow", but teken color name constants appear to be based on the
VGA scheme and use TC_BROWN for color 3. Even so, the palette table
used 50,50,0 as the RGB percentage tuple, resulting in a dim yellow for
framebuffer consoles at the time teken was introduced.
Amusingly, in 19e2ce2d83 the comment on the palette entry was changed
from "brown" to "dark yellow" but the colour itself was changed from
a pure yellow to being somewhat brown.
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Support the "usr" and "os" qualifiers on arm64 events to restrict
event counting to either usermode or the kernel, respectively. If
neither qualifier is given, events are counted in both.
Reviewed by: emaste
Sponsored by: University of Cambridge, Google, Inc.
Differential Revision: https://reviews.freebsd.org/D34527
Accept "bright" or "light" prefix for named colors.
For numeric colors, update error message to specify that values 0 to 15
are allowed, and verify that values are in that range.
Reviewed by: imp, tsoome (both earlier version)
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D34512
