Further updates based on ways Peter Holm found to corrupt UFS
superblocks in ways that could cause kernel hangs or crashes.
No legitimate superblocks should fail as a result of these changes.
Reported by: Peter Holm
Tested by: Peter Holm
Sponsored by: The FreeBSD Foundation
- Record the physical address for doorbell page region
For supporting RDMA device with multiple user contexts with their
individual doorbell pages, record the start address of doorbell page
region for use by the RDMA driver to allocate user context doorbell IDs.
- Handle vport sharing between devices
For outgoing packets, the PF requires the VF to configure the vport with
corresponding protection domain and doorbell ID for the kernel or user
context. The vport can't be shared between different contexts.
Implement the logic to exclusively take over the vport by either the
Ethernet device or RDMA device.
- Add functions for allocating doorbell page from GDMA
The RDMA device needs to allocate doorbell pages for each user context.
Implement those functions and expose them for use by the RDMA driver.
- Export Work Queue functions for use by RDMA driver
RDMA device may need to create Ethernet device queues for use by Queue
Pair type RAW. This allows a user-mode context accesses Ethernet hardware
queues. Export the supporting functions for use by the RDMA driver.
- Define max values for SGL entries
The number of maximum SGl entries should be computed from the maximum
WQE size for the intended queue type and the corresponding OOB data
size. This guarantees the hardware queue can successfully queue requests
up to the queue depth exposed to the upper layer.
- Define and process GDMA response code GDMA_STATUS_MORE_ENTRIES
When doing memory registration, the PF may respond with
GDMA_STATUS_MORE_ENTRIES to indicate a follow request is needed. This is
not an error and should be processed as expected.
- Define data structures for protection domain and memory registration
The MANA hardware support protection domain and memory registration for use
in RDMA environment. Add those definitions and expose them for use by the
RDMA driver.
MFC after: 2 weeks
Sponsored by: Microsoft
Commit 40ada74ee1 modified the NFSv4.1/4.2 client so
that it would issue a DestroySession to the server when
all session slots are marked bad. Once this is done,
the Sequence operation should get a NFSERR_BADSESSION
reply from the server.
Without this patch, the code was setting ND_HASSLOTID
when, in fact, there was no slot marked in use by
nfsv4_sequencelookup(). This would result in the
code freeing a slot not in use. The effect of this
was minimal, since the session was already destroyed.
This patch fixes the code so that it does not set
ND_HASSLOTID for this case.
MFC after: 2 weeks
The NFSv4.1/4.2 client does recovery when it receives a
NFSERR_BADSESSION reply from the server. If the server has
not rebooted, this is often caused by multiple clients using
the same /etc/hostid and, as such, not being recognized as
different clients by the server.
This trivial patch adds a console message to suggest that
client's /etc/hostid's need to be checked for uniqueness.
MFC after: 2 weeks
None of tools working with login classes change umask(1)
and we had no ways to specify non-default umask for a service
not touching its startup script. This change makes in possible.
Some file-sharing services that create new files may benefit from it.
Differential: https://reviews.freebsd.org/D36309
MFC-after: 3 days
Improve RB_REMOVE by reading the fields of the removed node only once,
and by not writing to the removed node.
Reviewed by: kib
Discussed with: markj
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D36288
The NFSv4.1/4.2 server generates a console message that indicates
that there is no session. I was until recently perplexed w.r.t. how
this could occur. It turns out that the common cause is multiple NFS
clients with the same /etc/hostid.
The host uuid is used by the FreeBSD NFSv4.1/4.2 client as a unique
identifier for the client. If multiple clients use the same host uuid,
this indicates to the NFSv4.1/4.2 server that they are the same client
and confusion occurs.
This trivial patch modifies the console message to suggest that the
client's /etc/hostid needs to be checked for uniqueness.
Reviewed by: asomers
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D36377
When the NFSv4.1/4.2 client is handling a server error
of NFSERR_BADSESSION, it retries RPCs with a new session.
Without this patch, the nd_slotid was not being updated
for the new session.
This would result in a bogus console message like
"Wrong session srvslot=X slot=Y" and then it would
free the incorrect slot, often generating a
"freeing free slot!!" console message as well.
This patch fixes the problem.
Note that FreeBSD NFSv4.1/4.2 servers only
generate a NFSERR_BADSESSION error after a reboot
or after a client does a DestroySession operation.
PR: 260011
MFC after: 1 week
Make Ethernet rule addition behave just like L3 rules, in that we now
allow ongoing transaction to be interrupted, rather than rejecting a new
one.
The result of that is that we can no longer end up in a state where a
transaction failed, but was not rolled back, blocking us from setting
new rules.
It's safe to assume there's no pending epoch callback for cleanup here,
because we've explicitly called it before hitting pf_begin_eth().
Sponsored by: Rubicon Communications, LLC ("Netgate")
Enabling other driver code found that the bssid in
struct ieee80211_bss_conf is not an array but expected to be
a const pointer (const, != NULL checks).
Adjust accordingly in the header and in the LinuxKPI compat code.
There initialization now needs to be a static array always present
as we need a value before we will have a BSS (node in scan_to_auth)
as the mac80211 driver (*handlers) are expecting the pointer to be
not NULL (copying without checks).
This is a pre-req to enable d3 (CONFIG_PM[_SLEEP]) in the future.
Tested by: Tomoaki AOKI (junchoon dec.sakura.ne.jp)
Tested by: Berislav Purgar (bpurgar gmail.com)
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Some non-compliant USB devices do not implement the
clear endpoint halt feature. Silently ignore such
failures, when they at least responded correctly
passing up a valid STALL PID packet.
Tested by: Doug Ambrisko <ambrisko@ambrisko.com>
MFC after: 1 week
Sponsored by: NVIDIA Networking
And thus has a limited range of supported baud rates. Also add that
setting BOOT_BOOT0_COMCONSOLE_SPEED=0 will leave it unchanged which
sometimes can give you 115200 if the BIOS initialized things outside of
the normal BIOS baud rates (which many x86 enbedded-targetted boards
do).
Sponsored by: Netflix
Reviewed by: emaste, manu (earlier versions)
Suggestions by: jhb
Differential Revision: https://reviews.freebsd.org/D36300
When ConOut is missing, we used to default to serial. Except we did it
in the worst way possible by just setting the howto bits and not
updating the console setting, which lead to weird behavior where we'd
get some things on the video port, others on serial.
Instead, set console to "efi,comconsole" for this case. Also set
RB_MULTIPLE always (so we get dual consoles from the kernel) and or in
RB_SERIAL when we can't find GOPs that suggest the precense of a video
console. This will put output in the most places and have a sensible
default for 'primary' console.
Sponsored by: Netflix
Reviewed by: emaste, manu
Differential Revision: https://reviews.freebsd.org/D36299
In kernels without MAC, error is not set for sockets whose protocol
layer does not implement the pr_sense hook.
Reported by: Jenkins (powerpc kernel builds)
Fixes: 7c04ca1fad sockets: for stat(2) on a socket don't report hiwat as block size
For true EFI platforms, the EFI BIOS will return version 1 (since no
other version is defined as of this commit). However, for environments
that wish to create an EFI memory mapping table that aren't actually
EFI, we need to know this. Add EFI_MEMORY_DESCRIPTOR_VERSION for this
constant.
Sponsored by: Netflix
o Undocument sockets that are no longer supported, or never were.
o Add AF_HYPERV. Note: PF_HYPERV isn't defined, no typo here.
o Point at ip(4) and ip6(4) instead of unwelcoming "not described here".
Reviewed by: gbe, markj
Differential revision: https://reviews.freebsd.org/D36284
Further updates based on ways Peter Holm found to corrupt UFS
superblocks in ways that could cause kernel hangs or crashes.
No legitimate superblocks should fail as a result of these changes.
Reported by: Peter Holm
Tested by: Peter Holm
Sponsored by: The FreeBSD Foundation
Like the detailed diagnostics produced when a bad superblock
is read, provide similar detailed diagnostics when bad
cylinder groups are read.
Reported by: Peter Holm
Tested by: Peter Holm
Sponsored by: The FreeBSD Foundation
When the NFSv4.1/4.2 client is handling a server error
of NFSERR_BADSESSION, it retries RPCs with a new session.
Without this patch, the nd_slotid was not being updated
for the new session.
This would result in a bogus console message like
"Wrong session srvslot=X slot=Y" and then it would
free the incorrect slot, often generating a
"freeing free slot!!" console message as well.
This patch fixes the problem.
Note that FreeBSD NFSv4.1/4.2 servers only
generate a NFSERR_BADSESSION error after a reboot
or after a client does a DestroySession operation.
PR: 260011
MFC after: 1 week
When a session has been marked defunct by the server
sending a NFSERR_BADSESSION reply to the NFSv4.1/4.2
client, nfsv4_sequencelookup() returns NFSERR_BADSESSION
without actually assigning a session slot.
Without this patch, newnfs_request() would erroneously
free slot 0.
This could result in the slot being reused prematurely,
but most likely just generated a "freeing free slot!!"
console message.
This patch fixes the code to not do the erroneous
freeing of the slot for this case.
PR: 260011
MFC after: 1 week
Notable upstream pull request merges:
#13717 Fix zpool status in case of unloaded keys
#13753 Prevent zevent list from consuming all of kernel memory
#13767 arcstat: fix -p option
#13785 Updates for snapshots_changed property
Obtained from: OpenZFS
OpenZFS commit: a582d52993
The target modifiers (-g, -p, -u) may occur in any position except
between -n and its argument; furthermore, we support both the old
absolute form (without -n) and the modern relative form (with -n).
Sponsored by: Klara, Inc.
To simplify adding new handlers merge the common parts of the functions
used to call into the arm SMCCC firmware.
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D36297
When the IDC flag is set in the cache type register we don't need to
clean the data cache to the point of unification. Previously we
supported this flag being set only when the DIC flags was also set.
Add a new handler for when this is not the case.
Reviewed by: kib
Sponsored by: The FreeBSD Foundation, Ampere (hardware)
Differential Revision: https://reviews.freebsd.org/D36296
When running under a VM we don't have access to the physical counter.
Add support to emulate this instruction by handling the trap in the
kernel. As it is slow only enable when the hw.emulate_phys_counter
tunable is set on boot.
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D35613
Replace the quoted printable code with one that respects RFC2045
Add tests about this parsers and encoders, using examples from the
wikipedia page.
Reviewed by: pstef
Differential Revision: https://reviews.freebsd.org/D36314
In searching for where to insert a new node, RB_INSERT discards the
address of the pointer that will have to be modified, so that it must
find it again from the values of 'parent' and 'comp'. Stop discarding
that address, and so avoid having to recompute it.
Reviewed by: alc
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D36317