device_set_desc should be called only if driver probes successfully.
Approved by: mw(mentor)
Reviewed by: mw, kd
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D35998
Changes since 1.26.6.0 are listed here. This list comes from the
Release Notes for "Chelsio Unified Wire 3.17.0.0 for Linux" dated
2022-07-29.
Fixes
-----
BASE:
- Enabled all MA parity interrupt bits.
- Use config file value to override number of rx channel. nrxch=1 was not
handled in the firmware.
- Replaced read only registers with new registers EDC_H_BIST_USER_WDATA0,
EDC_H_BIST_USER_WDATA1 and EDC_H_BIST_CMD_LEN to dump the uP memory parity
error status registers.
- 10G simplex module support enabled.
Obtained from: Chelsio Communications
MFC after: 1 month
Sponsored by: Chelsio Communications
Add a descrition to the tunefs(8) -j (journal enablement) flag
that explains what soft updates journaling does, the tradeoffs
to using it, and the limitations that it imposes.
Requested by: Graham Perrin
PR: 261944
Sponsored by: The FreeBSD Foundation
With clang 15, the following -Werror warning is produced:
sys/riscv/riscv/db_trace.c:56:23: error: a function declaration without a prototype is deprecated in all versions of C [-Werror,-Wstrict-prototypes]
db_md_list_watchpoints()
^
void
This is because db_md_list_watchpoints() is declared with a (void)
argument list, but defined with an empty argument list. Make the
definition match the declaration.
MFC after: 3 days
With clang 15, the following -Werror warnings are produced:
sys/powerpc/booke/mp_cpudep.c:54:20: error: a function declaration without a prototype is deprecated in all versions of C [-Werror,-Wstrict-prototypes]
cpudep_ap_bootstrap()
^
void
sys/powerpc/booke/mp_cpudep.c:97:16: error: a function declaration without a prototype is deprecated in all versions of C [-Werror,-Wstrict-prototypes]
cpudep_ap_setup()
^
void
This is because cpudep_ap_bootstrap() and cpudep_ap_setup() are declared
with (void) argument lists, but defined with empty argument lists. Make
the definitions match the declarations.
MFC after: 3 days
With clang 15, the following -Werror warning is produced:
sys/powerpc/aim/moea64_native.c:306:22: error: a function declaration without a prototype is deprecated in all versions of C [-Werror,-Wstrict-prototypes]
moea64_install_native()
^
void
This is because moea64_install_native() is declared with a (void)
argument list, but defined with an empty argument list. Make the
definition match the declaration.
MFC after: 3 days
With clang 15, the following -Werror warning is produced:
sys/powerpc/aim/mmu_radix.c:5409:22: error: variable 'freed' set but not used [-Werror,-Wunused-but-set-variable]
int allfree, field, freed, idx;
^
The 'freed' variable is only used when PV_STATS is defined. Ensure it is
only declared and set in that case.
MFC after: 3 days
With clang 15, the following -Werror warnings are produced:
sys/powerpc/aim/mmu_radix.c:786:20: error: a function declaration without a prototype is deprecated in all versions of C [-Werror,-Wstrict-prototypes]
mmu_radix_tlbie_all()
^
void
sys/powerpc/aim/mmu_radix.c:3615:15: error: a function declaration without a prototype is deprecated in all versions of C [-Werror,-Wstrict-prototypes]
mmu_radix_init()
^
void
sys/powerpc/aim/mmu_radix.c:6081:20: error: a function declaration without a prototype is deprecated in all versions of C [-Werror,-Wstrict-prototypes]
mmu_radix_scan_init()
^
void
This is because mmu_radix_tlbie_all(), mmu_radix_init(), and
mmu_radix_scan_init() are declared with (void) argument lists, but
defined with empty argument lists. Make the definitions match the
declarations.
MFC after: 3 days
With clang 15, the following -Werror warnings are produced:
sys/powerpc/aim/mmu_oea64.c:1947:12: error: a function declaration without a prototype is deprecated in all versions of C [-Werror,-Wstrict-prototypes]
moea64_init()
^
void
sys/powerpc/aim/mmu_oea64.c:3257:17: error: a function declaration without a prototype is deprecated in all versions of C [-Werror,-Wstrict-prototypes]
moea64_scan_init()
^
void
This is because moea64_init() and moea64_scan_init() are declared with
(void) argument lists, but defined with empty argument lists. Make the
definitions match the declarations.
MFC after: 3 days
With clang 15, the following -Werror warning is produced:
sys/powerpc/aim/aim_machdep.c:750:14: error: a function declaration without a prototype is deprecated in all versions of C [-Werror,-Wstrict-prototypes]
mpc745x_sleep()
^
void
This is because mpc745x_sleep() is declared with a (void) argument list,
but defined with an empty argument list. Make the definition match the
declaration.
MFC after: 3 days
With clang 15, the following -Werror warning is produced:
sys/netinet/tcp_hpts.c:1114:10: error: variable 'paced_cnt' set but not used [-Werror,-Wunused-but-set-variable]
int32_t paced_cnt = 0;
^
sys/netinet/tcp_hpts.c:1112:11: error: variable 'total_slots_processed' set but not used [-Werror,-Wunused-but-set-variable]
uint64_t total_slots_processed = 0;
^
The 'paced_cnt' variable was in tcp_hpts.c when it was first added, and
the 'total_slots_processed' variable was added in d7955cc0ff, but
both appear to have been debugging aids that have never been used, so
remove them.
MFC after: 3 days
With clang 15, the following -Werror warning is produced:
sys/netinet/tcp_hpts.c:1594:23: error: a function declaration without a prototype is deprecated in all versions of C [-Werror,-Wstrict-prototypes]
tcp_choose_hpts_to_run()
^
void
This is because tcp_choose_hpts_to_run() is declared with a (void)
argument list, but defined with an empty argument list. Make the
definition match the declaration.
MFC after: 3 days
With clang 15, the following -Werror warning is produced:
sys/arm64/arm64/db_trace.c:53:23: error: a function declaration without a prototype is deprecated in all versions of C [-Werror,-Wstrict-prototypes]
db_md_list_watchpoints()
^
void
This is because db_md_list_watchpoints() is declared with a (void)
argument list, but defined with an empty argument list. Make the
definition match the declaration.
MFC after: 3 days
With clang 15, the following -Werror warning is produced:
sys/arm/mv/mv_common.c:414:20: error: a function declaration without a prototype is deprecated in all versions of C [-Werror,-Wstrict-prototypes]
mv_check_soc_family()
^
void
This is because mv_check_soc_family() is declared with a (void) argument
list, but defined with an empty argument list. Make the definition match
the declaration.
MFC after: 3 days
GELI images are created in a different manner than non-GELI
images. Update them to set the label of 'root' on the UFS partition and
use that in fstab. Drop comments about needing to do this, as well as
the 'dev' variable now that it's unused.
Sponsored by: Netflix
Minor changes to the non-geli UFS targets: migrate to using ufs labels
so we don't need to know the name of the device we booted off of. This
doesn't change the GELI test cass just yet since I've not tested them.
ZFS doesn't need these changes since we don't need to encode the device
for it.
Sponsored by: Netflix
For TSF and beacon generation, each STA has to start its local TSF timer
and sends beacon frames when it reaches the state IEEE80211_S_RUN.
The TSF timer will be used for IBSS merge and beacon frame transmission.
The TSF timer is kept in the HAL of wtap(4). It is working by
continuously updating its value on timer interrupt simulated
by callout_reset().
When receiving beacons, the STA will be merged into the IBSS if
- the STA has the same SSID as the beacon sender
- the STA's TSF timer is smaller than the beacon sender's TSF timer.
After the merging process, the younger STA will be in the IBSS
created by the older STA and the younger STA stops sending beacon
frames. So beacon frames will always be sent by the oldest STA
in IBSS.
Sponsored by: Google, Inc. (GSoC 2022)
Reviewed By: lwhsu, adrian
Differential Revision: https://reviews.freebsd.org/D35841
The function removes the range of addresses from GAS. Right now it is
unused.
The initial version of the patch was extracted from the stalled work for
integration of DMAR and bhyve, see D25672. Having the function in the
main tree would allow it to co-evolve with other active changes to the
IOMMU driver.
Requested by: alc
Reviewed by: alc, dougm
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D36001
Run a service-based setup script before running the start command.
Useful for automatic configuration file generation.
Reviewed by: https://reviews.freebsd.org/D36006
Call bus_dmamap_sync() for related dma operations. This is required
on ARM64 architecture.
Tested by: Souradeep Chakrabarti <schakrabarti@microsoft.com>
MFC after: 2 weeks
Sponsored by: Microsoft
This function was added in pre-epoch era ( 9a1b64d5a0 ) to
provide public rtentry access interface & hide rtentry internals.
The implementation is based on the large on-stack copying and
refcounting of the referenced objects (ifa/ifp).
It has become obsolete after epoch & nexthop introduction. Convert
the last remaining user and remove the function itself.
Differential Revision: https://reviews.freebsd.org/D36197
With clang 15, the following -Werror warning is produced:
sys/netinet/tcp_stacks/rack.c:17405:12: error: variable 'outstanding' set but not used [-Werror,-Wunused-but-set-variable]
uint32_t outstanding;
^
The 'outstanding' variable was used later in the rack_output() function,
but refactoring in 35c7bb3407 removed the usage. To avoid too much
code churn, mark the variable unused to supress the warning.
MFC after: 3 days
With clang 15, the following -Werror warning is produced:
sys/netinet/tcp_stacks/rack.c:16148:6: error: variable 'cnt_thru' set but not used [-Werror,-Wunused-but-set-variable]
int cnt_thru = 1;
^
The 'cnt_thru' variable is only used when TCP_ACCOUNTING is defined.
Ensure it is only declared and set in that case.
MFC after: 3 days
With clang 15, the following -Werror warning is produced:
sys/netinet/tcp_stacks/bbr.c:11925:11: error: variable 'rtr_cnt' set but not used [-Werror,-Wunused-but-set-variable]
uint32_t rtr_cnt = 0;
^
The 'rtr_cnt' variable was in bbr.c when it was first added, but it
appears to have been a debugging aid that has never been used, so remove
it.
MFC after: 3 days
With clang 15, the following -Werror warning is produced:
sys/kern/kern_poll.c:374:16: error: a function declaration without a prototype is deprecated in all versions of C [-Werror,-Wstrict-prototypes]
netisr_pollmore()
^
void
This is because netisr_pollmore() is declared with a (void) argument
list, but defined with an empty argument list. Make the definition match
the declaration.
MFC after: 3 days
With clang 15, the following -Werror warning is produced:
sys/dev/drm2/drm_fb_helper.c:86:18: error: a function declaration without a prototype is deprecated in all versions of C [-Werror,-Wstrict-prototypes]
framebuffer_alloc()
^
void
This is because framebuffer_alloc() is declared with a (void) argument
list, but defined with an empty argument list. Make the definition match
the declaration.
MFC after: 3 days
With clang 15, the following -Werror warning is produced:
sys/cddl/dev/dtrace/riscv/dtrace_subr.c:165:17: error: a function declaration without a prototype is deprecated in all versions of C [-Werror,-Wstrict-prototypes]
dtrace_gethrtime()
^
void
This is because dtrace_gethrtime() is declared with a (void) argument
list, but defined with an empty argument list. Make the definition match
the declaration.
MFC after: 3 days
With clang 15, the following -Werror warning is produced:
sys/cddl/dev/dtrace/powerpc/dtrace_subr.c:237:17: error: a function declaration without a prototype is deprecated in all versions of C [-Werror,-Wstrict-prototypes]
dtrace_gethrtime()
^
void
This is because dtrace_gethrtime() is declared with a (void) argument
list, but defined with an empty argument list. Make the definition match
the declaration.
MFC after: 3 days
With clang 15, the following -Werror warning is produced:
sys/cddl/dev/dtrace/arm/dtrace_subr.c:174:17: error: a function declaration without a prototype is deprecated in all versions of C [-Werror,-Wstrict-prototypes]
dtrace_gethrtime()
^
void
This is because dtrace_gethrtime() is declared with a (void) argument
list, but defined with an empty argument list. Make the definition match
the declaration.
MFC after: 3 days
With clang 15, the following -Werror warning is produced:
sys/arm64/rockchip/rk_spi.c:229:6: error: variable 'cnt' set but not used [-Werror,-Wunused-but-set-variable]
int cnt = 0;
^
The 'cnt' variable was in rk_spi.c when it was first added, but it
appears to have been a debugging aid that has never been used, so remove
it.
MFC after: 3 days
The default QEMU config is to have the RTC in UTC. However, if run with
-rtc base=localtime (and wall_cmos_clock is set to match), the driver
fails to account for adjkerntz due to the use of CLOCKF_SETTIME_NO_ADJ.
Copy the same code used by other CLOCKF_SETTIME_NO_ADJ-using drivers
to fix this, namely manually subtracting utc_offset().
Fixes: d63a631e72 ("Add Goldfish RTC device driver for RISC-V")
MFC after: 1 week
Summary:
Code was using the mask value without the shift.
Test Plan: Within FreeBSD/Linux guest, Identify NVMe controller to check the result.
Reviewed by: chuck, imp
MFC after: 2 weeks
Signed-off-by: Wanpeng Qian <wanpengqian@gmail.com>
Differential Revision: https://reviews.freebsd.org/D32659
Summary:
Currently Active Firmware Info is not initialized.
Fix is to initialize the Active Firmware Info to Slot 1.
Test Plan: Within FreeBSD/Linux guests, show the Firmware Logpage to confirm.
Reviewed By: chuck
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D32658
Summary:
Set Number of Power States Supported to indicate 1 power state. Keep the
Power State Descriptor data structures as zero to indicate "Not
reported".
Test Plan:
Within FreeBSD/Linux guests, list the number of power states and check
the Max Power value.
Reviewed By: markj, chuck
MFC after: 2 weeks
Signed-off-by: Wanpeng Qian <wanpengqian@gmail.com>
Differential Revision: https://reviews.freebsd.org/D32657
Summary: This returns whether the given 802.11 frame has the protected bit set.
Test Plan:
* tested in AP/STA mode
* STA mode - local athp/ath10k driver
* AP mode - in tree ath driver
Subscribers: imp, melifaro, glebius
Reviewed by: bz
Approved by: bz
Differential Revision: https://reviews.freebsd.org/D36183
