The Li macro is deprecated. Also, the Cm macro should be used here
instead for consistency with the rest of the manual and style.mdoc(5).
Fixes: e47fe3183e bhyve: add ROM emulation
MFC after: 1 month
The security/520-pfdenied script only reports blocked packets from the
main ruleset or any blocklistd(8) anchor.
Add an option to periodic.conf(5) to make it possible to specify
additional anchors to report.
PR: 262446
Reviewed by: kp
For backward compatibility, the memory size will be interpreted in MB if
it's smaller than1 MB and has no suffix. Nowadays, the -m switch accepts
more than just MB. Respect it in the usage message.
Differential Revision: https://reviews.freebsd.org/D34506
Reviewed by: grehan
Sponsored by: Beckhoff Automation GmbH & Co. KG
MFC after: 1 month
Some PCI devices especially GPUs require a ROM to work properly.
The ROM is executed by boot firmware to initialize the device.
To add a ROM to a device use the new ROM option for passthru device
(e.g. -s passthru,0/2/0,rom=<path>/<to>/<rom>).
It's necessary that the ROM is executed by the boot firmware.
It won't be executed by any OS.
Additionally, the boot firmware should be configured to execute the
ROM file.
For that reason, it's only possible to use a ROM when using
OVMF with enabled bus enumeration.
Differential Revision: https://reviews.freebsd.org/D33129
Sponsored by: Beckhoff Automation GmbH & Co. KG
MFC after: 1 month
Export functions for reading and writing the pci config space from passthru
device to be used by other devices.
This is required for lpc devices to set their vendor/device ids to their
physical values.
Otherwise, GPU passthrough for integrated Intel GPUs won't work properly.
Differential Revision: https://reviews.freebsd.org/D33769
Reviewed by: markj
Sponsored by: Beckhoff Automation GmbH & Co. KG
MFC after: 1 month
Even today it is possible to specify pinning for a vCPU higher than
the configured number of CPUs but lower than VM_MAXCPU without raising
an error.
Reviewed by: grehan
Differential Revision: https://reviews.freebsd.org/D34492
Use basl_ncpu instead of VM_MAXCPU in MADT_SIZE. Since several of the
offsets are no longer compile time constants, unroll the loop
generating ACPI tables.
Reviewed by: grehan
Differential Revision: https://reviews.freebsd.org/D34490
With the initial import of 386BSD 0.1 in 1993, the daily execution of
/etc/news.expire was introduced (see commit 1bf9d5d951).
In 1997, this was brought into periodic resulting in daily/330.news
(see commit 28dce04d19). But as far as I see, /etc/news.expire has
never existed.
PR: 256238
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D30631
Make gctl_add_param() API public, allowing more precise control over
parameter flags. Previously it was impossible to properly declare
write-only ASCII parameters, used for result reporting, they were
declared as read-write binary instead, that was not nice.
MFC after: 1 month
Use seperate nvlist entries for the romfile and the varfile.
While here, don't leak varfd in bootrom_loadrom().
Reviewed by: jhb, markj
Differential Revision: https://reviews.freebsd.org/D33433
Improve the installer: wlanconfig allows user to enter WiFi details
if no networks found, useful to connect to a hidden SSID.
PR: 246192
Reported by: emaste
Approved by: bapt (mentor)
Differential Revision: https://reviews.freebsd.org/D34149
Retrieves that path for a device. Different methods to enumerat the path
are supported, called locators.
Sponsored by: Netflix
Reviewed by: jhb
Differential Revision: https://reviews.freebsd.org/D32747
During distributeworld we call distribute on subdirectories, which in
turn calls installconfig. However, this recursive installconfig call
appends the distribution name (in these cases, "base") to DESTDIR. For
install(1) this works fine as its -D argument comes from the top-level
Makefile.inc1, which passes the original DESTDIR, thereby resulting in
the METALOG entry having the distribution name as a prefix representing
its true installed path relative to the root, but for the hand-rolled
entries they do not use install(1) and thus do not have access to what
the original DESTDIR was, resulting in the METALOG missing this prefix.
Thus, pass down the name of the distribution via a new variable DISTBASE
(chosen as Makefile.inc1 already uses that to convey this exact same
information to etc's distrib-dirs during distributeworld) and prepend
this to the handful of manually-generated METALOG entries. For the
installworld case this variable will be empty and so this behaves as
before.
Note that we need to be careful to avoid double slashes in the METALOG;
distributeworld uses find | awk to split the single METALOG up into
multiple dist.meta files, and this relies on the paths in the METALOG
having the exact prefix ./dist (or ./dist/usr/lib/debug).
Reviewed by: brooks, emaste
Differential Revision: https://reviews.freebsd.org/D33997
libopts uses generated format string tables that contain embedded NULs.
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D34386
The OID "kern.iscsi.login_timeout" references an integer and
not a string.
Sponsored by: NetApp, Inc.
Differential Revision: https://reviews.freebsd.org/D34380
The result of read() was stored in an unsigned variable, so the
test for a negative value would never work.
While I'm here, print a better error message for an empty file,
omitting the misleading errno message.
Reported by: Coverity
MFC after: 1 week
Sponsored by: Dell EMC Isilon
Since commit 04e9edb544, rtsold has leaked the memory for the
argument vector of every script it runs.
Reported by: Coverity
Reviewed by: markj
Fixes: 04e9edb544
MFC after: 1 week
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D34355
Set errno to EINVAL if the name overflows the buffer, as was done
before commit ecce515d54.
Reviewed by: dab, markj
Fixes: ecce515d54
MFC after: 1 week
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D34354
Add per-Session configurable ping (SCSI NOP) and login timeouts.
Remove the torn down, old iSCSI session quickly, when performing a reconnect.
Reviewed By: trasz
Sponsored by: NetApp, Inc.
Differential Revision: https://reviews.freebsd.org/D34198
Advertise Namespace Attribute Notices events in the Optional
Asynchronous Events Supported (OAES) field of the Identify Controller
data structure. Additionally, rename the enums and macros to clarify
these are AEN's related to Notices and not generic information.
Reported by: andy@omniosce.org
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D34331
UI fix not related to the real fetching process, use 'nfiles'
(instead of 'total files size') to compute main bar percentage
if an error occurs:
- fix: main bar greater than 100%, if an error occurs before fetching
- fix: main bar less than 100%, if an error occurs during fetching
- add: last mixedgauge, at least one dialog if a total failure occurs
PR: 164094, 169748
Approved by: bapt (mentor)
Review: https://reviews.freebsd.org/D33978
This is a small program that when invoked will create start and stop
boottrace entries via sysctl, and execute the desired command. Having
this as an executable -- as opposed to some shell script invoking
sysctl(8) -- allows the total resource usage recorded by the trace
entries to include the child process.
Reviewed by: 0mp, trasz (older version)
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D31929
The nvlist for a checkpoint request will now look like:
{ cmd="checkpoint", suspend="true/false", filename="afilename" }
Reviewed by: jhb
Suggested by: jhb
Differential Revision: https://reviews.freebsd.org/D34237
This addresses one nit and one bug in the BE creation feature of
freebsd-update:
The nit addressed is that it currently only names the BEs after the
userland version, but the kernel version may be higher. After this
change, we request both and pass them through sort(1) to choose the
highest. This is especially helpful if a freebsd-update patch touched
one but not the other.
The bug fixed is that roots updated that are not located at '/', e.g.,
by using -b or -j, will no longer create boot environments
automatically. There's a very low chance these will actually change the
BE in any meaningful way, anyways. It could make sense in the future
to allow an argument-override to create the BE anyways if someone comes
up with a non-standard setup, e.g., where a jail is an important part of
their boot environment on an appliance or some such setup.
Half of this patch is submitted by delphij@, the other half kevans@.
PR: 261446
MFC after: 3 days
Reviewed by: delphij, emaste, Dave Fullard <dave_fullard.ca>
Differential Revision: https://reviews.freebsd.org/D34257
In GNU ld and ld.lld, -dc is used with -r to allocate space to COMMON
symbols. It is presumably to work around legacy code which cannot
handle COMMON symbols in relocatable output. ld.lld may remove -dc or
make it a no-op for the 15.0.0 release.
As of 7420b323a0 crunch/crunchide does not require -dc, as the symbol
hiding technique no longer relied on making symbols local.
In addition -fno-common is now the default in Clang and GCC, so -dc
serves no purpose as the compiler does not generate COMMON symbols
anyway.
See https://maskray.me/blog/2022-02-06-all-about-common-symbols for more
detail on common symbols.
Reviewed by: emaste
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D34215
tcpsso is a command line tool to apply a socket option to an
existing TCP endpoint, which is identified by the inp_gencnt.
tcpsso can be used, for example, to switch the congestion control
module or the TCP stack.
Reviewed by: rrs, rscheff, debdrup, pau amma
Relnotes: yes
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D34139
Switch to using an nvlist with nvlist_send()/nvlist_recv() to
communicate from bhyvectl(8) to bhyve(8).
The idea is that a bhyve process receives a command with with a set of
arguments. The nvlist here is structured to reflect that premise.
For example, to snapshot the vm, the expected nvlist looks like:
{ cmd=START_CHECKPOINT, filename="filename" }
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D33977
This fixes the following warnings from clang 14:
usr.sbin/kbdmap/kbdmap.c:241:16: error: 'sscanf' may overflow; destination buffer in argument 5 has size 20, but the corresponding specifier may require size 21 [-Werror,-Wfortify-source]
&a, &b, buf);
^
usr.sbin/kbdmap/kbdmap.c:615:8: error: 'sscanf' may overflow; destination buffer in argument 3 has size 64, but the corresponding specifier may require size 65 [-Werror,-Wfortify-source]
keym, lng, desc);
^
usr.sbin/kbdmap/kbdmap.c:615:14: error: 'sscanf' may overflow; destination buffer in argument 4 has size 64, but the corresponding specifier may require size 65 [-Werror,-Wfortify-source]
keym, lng, desc);
^
usr.sbin/kbdmap/kbdmap.c:615:19: error: 'sscanf' may overflow; destination buffer in argument 5 has size 256, but the corresponding specifier may require size 257 [-Werror,-Wfortify-source]
keym, lng, desc);
^
In each case, the buffer being sscanf'd into is one byte too small.
MFC after: 3 days
This fixes the following warning from clang 14:
usr.sbin/bootparamd/bootparamd/bootparamd.c:204:32: error: 'fscanf' may
overflow; destination buffer in argument 3 has size 255, but the
corresponding specifier may require size 256 [-Werror,-Wfortify-source]
The MAX_MACHINE_NAME macro indicates the maximum number of bytes in a
machine name, but it does not include the NUL terminator required for
scanf.
MFC after: 3 days
To support the Arm Statistical Profiling Extension (SPE) ACPI 6.3 added
a place to hold the SPE interrupt. Add to acpidump to show when printing
the Arm Generic Interrupt data.
Sponsored by: The FreeBSD Foundation
This fixes a -Waddress-of-packed-member warning about a possibly
unaligned pointer from GCC 9 when calling convert_label().
__packed has to be removed from struct exfat_dirent as well to fix an
alignment warning when casting from a struct exfat_dirent pointer to a
struct exfat_de_label pointer.
Reviewed by: cem
Differential Revision: https://reviews.freebsd.org/D32144
Section 4.1.2.1 of the virtio spec states that the transitional PCI
device id for a scsi device is 0x1004.
Fix suggested by reporter.
PR: 259961
Reported by: me@nanaya.pro
Reviewed by: imp, jhb
Fixes: f9c005a17f ("Add bhyve virtio-scsi storage backend support.")
Differential Revision: https://reviews.freebsd.org/D34103
If the NVMe Controller doesn't support Namespace Management, it should
return "Invalid Namespace or Format" when the Host request Identify
Namespace with the global NSID value.
Fixes UNH IOL 16.0 Test 9.1, Case 6
Reviewed by: imp, allanjude
Tested by: jason@tubnor.net
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D33578
NVMe Controllers which do not support Endurance Groups must return an
error when the Endurance Group Event Aggregate Log Change Notices bit is
set in Set Features, Asynchronous Event Configuration.
Fixes UNH IOL Test 3.12, Case 8
Tested by: jason@tubnor.net
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D33577
The function which checks for a valid LBA range mistakenly named an
input value as NLB ("Number of Logical Blocks") instead of "number of
blocks". The NVMe specification defines NLB as a zero-based value (i.e.
NLB=0x0 represents 1 block, 0x1 is 2 blocks, etc.), but the passed
parameter is a 1's-based value.
Fix is to rename the variable to avoid future confusion.
While in the neighborhood, also check that the starting LBA is less than
the size of the backing storage to avoid an integer overflow.
Reviewed by: imp, allanjude, jhb
Tested by: jason@tubnor.net
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D33575
Implement basic support for the SEL field of Get Features. This returns
information about Namespace Specific features.
Fixes UNH ILO 16.0 Test 1.2, Case 13
Reviewed by: imp, allanjude
Tested by: jason@tubnor.net
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D33574
Compliant v1.4 Controllers must report a Controller Type (CNTRLTYPE).
Also, do not advertise secure erase functionality in the Format NVM
Attributes field of the Identify Controller data structure as the
Controller does not implement secure erase.
Fixes UNH ILO Test 1.1, Case 2
Reviewed by: imp, allanjude
Tested by: jason@tubnor.net
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D33573
This adds the ability for a guest OS to send Set / Get Feature,
Temperature Threshold commands. The implementation assumes a constant
temperature and will generate an Asynchronous Event Notification if the
specified threshold is above/below this value. Although the
specification allows 9 temperature values, this implementation only
implements the Composite Temperature.
While in the neighborhood, move the clear of the CSTS register in the
reset function after all other cleanup. This avoids a race with the
guest thinking the reset is complete (i.e. CSTS.RDY = 0) before the NVMe
emulation is actually complete with the reset.
Fixes UNH IOL 16.0 Test 1.7, cases 1, 2, and 4.
Tested by: jason@tubnor.net
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D33572
Be more conservative and only support the Features mandatory for an I/O
Controller.
Avoids a "hang" in UNH test 1.2.10 associated with Predictable Latency
Mode Configuration and Host Behavior Support features.
Tested by: jason@tubnor.net
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D33571
The NVMe emulation checked if the Asynchronous Event Request Limit
(a.k.a AERL) would be exceeded in pci_nvme_aer_add(), but this function
is only called from nvme_opc_async_event_req() which also checks for
exceeding the AERL.
Reviewed by: imp, allanjude
Tested by: jason@tubnor.net
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D33570
Modify the Get Log Page command to parse the Log Page Offset fields to
support more recent versions of the NVMe specification.
Fixes various tests for UNH Test 1.3.*
Reviewed by: imp, allanjude
Tested by: jason@tubnor.net
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D33568
Return an error if the feature specified in Set Features is Namespace
specific but the Namespace ID uses the Global Namespace tag.
Fixes UNH Test 1.2.7
Reviewed by: imp, allanjude
Tested by: jason@tubnor.net
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D33566
The NVM Format command is unique among the Admin commands in that it
needs to finish asynchronously. For this reason, the emulation code
invented a synthetic completion status (NVME_NO_STATUS) to indicate that
the command was still in progress and the command processing loop should
not generate a completion message. The implementation used the value
0xffff for the synthetic value as this set both the Status Code and
Status Code Type fields to reserved values.
Format initialized the completion status to this value and expected
error cases to override it with a status code/type appropriate to the
situation. The macros used to set the NVMe status are careful not to
modify bit 0 (i.e. the phase bit), which with the synthetic completion
status, causes the phase bit to get out of sync. When running tests in a
guest with illegal NVM Format commands, Admin commands would eventually
hang because it appeared there were no completions due to the incorrect
phase bit value.
Fix is to only set NVME_NO_STATUS if the blockif delete command
succeeds. While in the neighborhood, add a missing break statement when
NVM Format is not supported.
Reviewed by: imp, allanjude
Tested by: jason@tubnor.net
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D33565
- Use Ar macros for arguments
- Stylize the argument synopsis to the -d flag
- Change the width of the list to one of the actual tags in the list
- Stylize "ugen" and "/dev/ugen" with Cm as those are constant strings,
which are usually treated as command modifiers.
- Break long lines to reduce the number of warnings from linters
- Fix examples; the -d flag is now required when specifying the unit and
the address with the "dot notation".
MFC after: 2 weeks
Import bsddialog 0.1 Utility and Library, fully refatorized, API stable,
manuals completed, easier to maintain and improve.
Update deps for new API:
add mixedgauge consts, delete __DECONST and add bsddialog_geterror()
info to avoid silent errors
* tzsetup
* kbdmap
* distextract
Differential Revision: https://reviews.freebsd.org/D34066
When error is called with a message with spaces (and probably multiple
lines) these are passed into dialog unquoted and an error message was
presented, wrap with quotes.
Reviewed by: bapt, allanjude
Sponsored by: Ampere Computing LLC
Sponsored by: Klara Inc.
Differential Revision: https://reviews.freebsd.org/D33918
This is needed to get mediasize of the device after a resize event.
I missed this earlier as I was building WITH_BHYVE_SNAPSHOT, which
disables capsicum.
Reviewed by: khng, markj
Fixes: ae9ea22e14 ("bhyve: get mediasize for character devices when ...")
Differential Revision: https://reviews.freebsd.org/D34013
Notable upstream pull request merges:
#12766 Fix error propagation from lzc_send_redacted
#12805 Updated the lz4 decompressor
#12851 FreeBSD: Provide correct file generation number
#12857 Verify dRAID empty sectors
#12874 FreeBSD: Update argument types for VOP_READDIR
#12896 Reduce number of arc_prune threads
#12934 FreeBSD: Fix zvol_*_open() locking
#12947 lz4: Cherrypick fix for CVE-2021-3520
#12961 FreeBSD: Fix leaked strings in libspl mnttab
#12964 Fix handling of errors from dmu_write_uio_dbuf() on FreeBSD
#12981 Introduce a flag to skip comparing the local mac when raw sending
#12985 Avoid memory allocations in the ARC eviction thread
Obtained from: OpenZFS
OpenZFS commit: 17b2ae0b24
An AHCI controller may be specified with no connected ports. Avoid
dumping core in this case for compatibility with existing VM configs.
Reviewed by: khng, jhb
Fixes: 621b509048 Refactor configuration management in bhyve.
MFC after: 1 week
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D33969
Part two: Append bhyve -K option for specified keyboard layout
with layout setting files every languages.
Since the cmd option '-k' was used in the meantime
it was changed to '-K'
PR: 246121
Submitted by: koinec@yahoo.co.jp
Reviewed by: grehan@
Differential Revision: https://reviews.freebsd.org/D29473
MFC after: 4 weeks
The tests require SES hardware. Without it, the test cases will be
skipped.
Reviewed by: ken
Differential Revision: https://reviews.freebsd.org/D31809
Sponsored by: Axcient
MFC after: 2 weeks
pthread_create() returns 0 on success or an error number on failure.
Reviewed by: khng, markj
Differential Revision: https://reviews.freebsd.org/D33930
If an emulation uses those functions instead of set_config_value_node
or set_config_value, it allows the config values to get
overwritten. Introducing new functions is much more readable than
if else statements in the emulation code.
Reviewed by: khng
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33770
Weird side of SES specification is that some bits have different
meaning or semantics in status and control pages. This patch fixes
non-zero writes into reserved fields, that caused errors on some
enclosures when trying to control locate/fault LEDs, keeping other
bits unchanged.
MFC after: 2 weeks
Sposonred by: iXsystems, Inc.
Change its return type to void, because its result is ignored in both
call sites. Remove oldcnp argument as well, it is NULL always.
Suggested and reviewed by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D33721
The starting address passed to mprotect was wrong, so in the case where
the last page containing the table is not the last page of the BAR, the
wrong region would be unmapped.
Reported by: Andy Fiddaman <andy@omniosce.org>
Reviewed by: jhb
Fixes: 7fa2335347 ("bhyve: Map the MSI-X table unconditionally for passthrough")
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D33739
The PBA and MSI-X table can reside in different BARs.
Reported by: Andy Fiddaman <andy@omniosce.org>
Reviewed by: jhb
Fixes: 7fa2335347 ("bhyve: Map the MSI-X table unconditionally for passthrough")
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D33739
Bhyve allocates small 64 bit BARs below 4 GB and generates ACPI tables
based on this allocation. If the guest decides to relocate those BARs
above 4 GB, it could lead to mismatching ACPI tables. Especially
when using OVMF with enabled bus enumeration it could cause
issues. OVMF relocates all 64 bit BARs above 4 GB. The guest OS
may be unable to recover from this situation and disables some PCI
devices because their BARs are located outside of the MMIO space
reported by ACPI. Avoid this situation by giving the guest more
space for relocating BARs.
Let's be paranoid. The available space for BARs below 4 GB is 512 MB
large. Use a slop of 512 MB. It'll allow the guest to relocate all
BARs below 4 GB to an address above 4 GB. We could run into issues
when we exceeding the memlimit above 4 GB. However, this space has
a size of 32 GB. Even when using many PCI device with large BARs
like framebuffer or when using multiple PCI busses, it's very
unlikely that we run out of space due to the large slop.
Additionally, this situation will occur on startup and not at runtime
which is much better.
Reviewed by: markj
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33118
At the moment, you only have one single chance to read the fwctl
signature. At boot bhyve is in the state IDENT_WAIT. It's then
possible to switch to IDENT_SEND. After bhyve sends the signature,
it switches to REQ. From now on it's impossible to switch back to
IDENT_SEND to read the signature. For that reason, only a single
driver can read the signature. A guest can't use two drivers to
identify that fwctl is present. It gets even worse when using
OVMF. OVMF uses a library to access fwctl. Therefore, every single
OVMF driver would try to read the signature. Currently, only a
single OVMF driver accesses the fwctl. So, there's no issue with
it yet. However, no OS driver would have a chance to detect fwctl when
using OVMF because it's signature was already consumed by OVMF.
Reviewed by: markj
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D31981
E.g. Framebuffers can require large space and BARs need to be aligned
by their size. If BARs aren't allocated by size, it'll cause much
fragmentation of the MMIO space. Reduce fragmentation by ordering
the BAR allocation on their size to reduce the risk of
OUT_OF_MMIO_SPACE issues.
Reviewed by: markj
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D28278
Some passthru devices only support MSI instead of MSI-X. For those
devices the initialization of MSI-X table will fail. Re-add the
check erroneously removed in f1442847c9.
MFC after: 3 days
X-MFC with: f1442847c9
PR: 260148
Reviewed by: manu, bz
Differential Revision: https://reviews.freebsd.org/D33728
Shortlinks occupy the space of both di_db and di_ib when used. However,
everywhere that wants to read or write a shortlink takes a pointer do
di_db and promptly runs off the end of it into di_ib. This is fine on
most architectures, if a little dodgy. However, on CHERI, the compiler
can optionally restrict the bounds on pointers to subobjects to just
that subobject, in order to mitigate intra-object buffer overflows, and
this is enabled in CheriBSD's pure-capability kernels.
Instead, clean this up by inserting a union such that a new di_shortlink
can be added with the right size and element type, avoiding the need to
cast and allowing the use of the DIP macro to access the field. This
also mirrors how the ext2fs code implements extents support, with the
exact same structure other than having a uint32_t i_data[] instead of a
char di_shortlink[].
Reviewed by: mckusick, jhb
Differential Revision: https://reviews.freebsd.org/D33650
parseDWM() can advance the time to the next week. If the next week is
in the next month, then tm_mon is incremented. However, the increment
was failing to handle the wraparound from December to January, so when
parsing a rule during the last week of the December, the month would
advance to month 12. This triggered an out-of-bounds read of the
mtab[] array in days_pmonth() after parseDWM() returned. To fix,
this change resets the month to January and increment the year when
the month increment wraps.
The default rule for /var/log/weekly.log triggers this during the
last week of December each year.
Reported by: CHERI
Obtained from: CheriBSD
Reviewed by: jhb
Sponsored by: The University of Cambridge, Google Inc.
Differential Revision: <https://reviews.freebsd.org/D33687>
Text requests and responses can span multiple PDUs. In that case, the
sender sets the Continue bit in non-final PDUs and the Final bit in
the last PDU. The receiver responds to non-final PDUs with an empty
text PDU.
To support this, add a more abstract API in libiscsi which accepts and
receives key sets rather than PDUs. These routines internally send or
receive one or more PDUs. Use these new functions to replace the
handling of TextRequest and TextResponse PDUs in discovery sessions in
both ctld and iscsid.
Note that there is not currently a use case for large Text requests
and those are still always sent as a single PDU. However, discovery
sessions can return a text response listing targets that spans
multiple PDUs, so the new API supports sending and receiving multi-PDU
responses.
Reported by: Jithesh Arakkan @ Chelsio
Reviewed by: mav
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D33548
If you look at the SMBIOS specification, we'll find something is
missing. In particular at offset 0Dh is supposed to be the OEM-defined
field. This should go between security and height. It is not legal to
actually skip this and will lead to other folks not properly
interpreting later parts of the table.
https://www.illumos.org/issues/14312
Reviewed by: jhb
Submitted by: Robert Mustacchi <rm@fingolfin.org>
Obtained from: ilumos
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D33682
The first time we start bhyve with a passthru device everything is fine
as on boot we do enable BARs. If a driver (unload) inside bhyve disables
the BAR(s) as some Linux drivers do, we need to make sure we re-enable
them on next bhyve start.
If we are trying to mmap a disabled BAR for MSI-X (PCIOCBARMMAP)
the kernel will give us an EBUSY.
While we were re-enabling the BAR(s) in the current code loop
cfginit() was writing the changes out too late to the real hardware.
Move the call to init_msix_table() after the register on the real
hardware was updated. That way the kernel will be happy and the
mmap will succeed and bhyve will start.
Also simplify the code given the last argument to init_msix_table()
is unused we do not need to do checks for each bar. [1]
MFC after: 3 days
PR: 260148
Pointed out by: markj [1]
Sponsored by: The FreeBSD Foundation
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D33628
If a "raw" IPv6 address (denoted by a leading '[') is used as a target
address, then 'arg' is incremented by one to skip over the '['.
However, this meant that at the end of the function the wrong address
was passed to free(). With malloc junking enabled and given suitably
small strings, malloc() would happily overwrite the correct number of
bytes with junk, but off by one byte overwriting the byte after the
allocation.
This manifested as the first byte of the 'HeaderDigest' key being
overwritten causing the key name on the wire to be sent as
'\x5eaderDigest' which the target rejected.
Reported by: Jithesh Arakkan @ Chelsio
Found with: ASAN (via WITH_ASAN=yes)
Sponsored by: Chelsio Communications
clang complains about the downcasts from struct connection to struct
ctld_connection as the alignment of struct ctld_connection is higher
on 32-bit platforms. However, the warning is in this case harmless as
the downcasts are on objects originally allocated as instances of
struct ctld_connection with suitable alignment.
Reported by: npn, gjb
Fixes: 6378393308 Add an internal libiscsiutil library.
Sponsored by: Chelsio Communications
This will be used in future changes to support large text requests
spanning multiple PDUs.
Provide wrapper functions keys_load/save_pdu that operate use a PDU's
data buffer.
Reviewed by: mav
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D33547
Move some of the code duplicated between ctld(8) and iscsid(8) into a
libiscsiutil library.
Sharing the low-level PDU code did require having a
'struct connection' base class with a method table to permit separate
initiator vs target behavior (e.g. in handling proxy PDUs).
Reviewed by: mav, emaste
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D33544
And put pkg and its keys in it.
It's easier for small image to depend on this package rather than the
larger utilities one.
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33458
There is no reason that this shouldn't be there.
Change the dependency of caroot from utilities to openssl as it's
the only command that it uses not in runtime.
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33458
This allow one to install it without having to install FreeBSD-utilities.
While here put some newsyslog.d file in their own package.
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33456
This allow one to not install syslogd and use syslog-ng or any other
syslog daemon.
While here put some syslog.d file in their own package.
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33455
While here put the periodic files for some utilities in their own
packages.
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33454
And put the mtree binary and files in it.
Useful to create small mfsroot using /etc/rc.d/var without
having to install FreeBSD-utilities.
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33442
And put the tcp-wrapper utilities in it.
Reviewed by: emaste
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33439
Move some needed binaries/libs from FreeBSD-utilities to FreeBSD_runtime.
This is everything needed to boot to multiuser with FreeBSD-rc installed.
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33435
YP is less and less used, split them to users have the choice to not
install them.
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33441
Various tools can have alternate versions elsewhere, eg: the GNU
mailutils port (a dependency of emacs*) brings /usr/local/bin/mail.
Match the preset PATH in /etc/crontab for deterministic path searches
even when run manually with a different environment.
PR: 259265
Reported by: iandstanley@gmail.com
Implement a -v option to usbconfig(8), as a shortcut for the most
frequently needed commands dump_device_desc, dump_curr_config_desc,
and show_ifdrv.
While here, implement a real -h option that has been promised by the
man page.
Use <sysexits.h> to declare the utility return codes.
Reviewed by: hselasky
Differential Revision: https://reviews.freebsd.org/D33586
MFC after: 2 weeks
* in usage(), clearly mark -i interface as optional
* both, -u busnum and -a devaddr are optional as well
* various minor man page fixes
* clearly mark those two commands that actually use -i ifaceidx
* remove unused bitfield tag got_iface
* fix indentation level according to review comment
Differential Revision: https://reviews.freebsd.org/D33579/
Reviewed by: hselasky
MFC after: 2 weeks
This makes option handling consistent with other utilities as well as
Posix rules. By that, it's no longer important whether option name and
its argument are separated by a space or not, so -d5.3 works the same
as -d 5.3.
Also, recognize either /dev/ugen or ugen as prefix to the -d argument.
Note that this removes the undocumented feature that allowed to
specify multiple -d n.m options interleaved with commands referring to
that particular device in a single run.
If one install FreeBSD on multiple disks (say 13 and CURRENT) the first created
pool will always be used.
Prompt the user for a new pool name if we detect that the default or supplied one
already exists.
Reviewed by: imp
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33331
If one install FreeBSD on the same machine multiple times in a row or
on different harddrive they have a lot of 'FreeBSD' efi boot entries added.
With this patch we now do :
- If there is no 'FreeBSD' entry we add one like before
- If there is one or more entries we ask the user if they want to delete
them all and add a new one
- If they say yes we do that
- If they say no we prompt them an inputbox so they can enter a different
entry name if they want, it defaults to 'FreeBSD'
Reviewed by: bapt, imp
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33330
Register a "block resize" callback to be notified of changes to the
backing storage for the Namespace. Use this to generate an Asynchronous
Event Notification, Namespace Attributes Changed when the guest OS
provides an Asynchronous Event Request.
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D32953
Remove reference to PCMCIA. The issue is more generic than that. Also,
it does apply to FreeBSD, so no need to hedge about some OSes. The index
won't change if no other interfaces are created after the card is
removed, so note that it may change, not will change.
Suggested by: phk
Reviewed by: gleb
Sponsored by: Netflix
libbsdialog 0.0.1 provides:
* bsddialog_conf.auto_minwidth:
* menurows is variable with autosize (properly defines max menurows)
Then tzsetup can use BSDDIALOG_AUTOSIZE keeping the dialog behavior:
min 24 cols, max 16 menurows
Differential revision: https://reviews.freebsd.org/D33397
When an EVFILT_VNODE filter event is triggered, reset it.
This fixes the issue where a virtio-blk resize event would cause the
mevent thread to consume 100% of the cpu.
Reviewed by: jhb
Differential Revision: https://reviews.freebsd.org/D33326
OVMF creates two separate .fd files, a _CODE.fd file containing
the UEFI code, and a _VARS.fd file containing a template of an
empty UEFI variable store.
OVMF decides to write variables to the memory range just below the
boot rom code if it detects a CFI flash device. So here we add
just the barest facsimile of CFI command handling to bootrom.c
that is needed to placate OVMF.
Submitted by: D Scott Phillips <d.scott.phillips@intel.com>
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D19976
MFC After: 1 week
Add an idletime user group that allows non-root users to run processes
with idle scheduling priority. Privileges are granted by a MAC policy in
the mac_priority module. For this purpose, the kernel privilege
PRIV_SCHED_IDPRIO was added to sys/priv.h (kernel module ABI change).
Deprecate the system wide sysctl(8) knob
security.bsd.unprivileged_idprio which lets any user run idle priority
processes, regardless of context. While the knob is still working, it is
marked as deprecated in the description and in the man pages.
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D33338
While here:
- Cluster flags without arguments together.
- Simplify the synopsis of the -a flag. There is no need to distinguish
between address and hostname there.
- Add a missing argument to the -a flag in the description section.
- Fix some typos.
MFC after: 3 days
This is a MAC policy module that grants scheduling privileges based on
group membership. Users or processes in the group realtime (gid 47) are
allowed to run threads and processes with realtime scheduling priority.
For timing-sensitive, low-latency software like audio/jack, running with
realtime priority helps to avoid stutter and gaps.
PR: 239125
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D33191
In addition to filtering by stack and state, allow filtering
by the congestion control module used. Choose the command line
options to be consistent with the ones of sockstat.
MFC after: 1 week
Sponsored by: Netflix, Inc.
NVMe conformance tests for the Format command failed if the
backing-storage for the bhyve device was a file instead of a Zvol. The
tests (and the specification) expect a Format to destroy all previously
written data. The bhyve NVMe emulation implements this by trimming /
deallocating all data from the backing-storage.
The blockif_candelete() function indicated the file did not support
deallocation (i.e. fpathconf(..., _PC_DEALLOC_PRESENT) returned FALSE)
even though the kernel supported file hole punching. This occurs on
builds with Capsicum enabled because blockif did not allow the
fpathconf(2) right.
Fix is to add CAP_FPATHCONF to the cap_rights_init(3) call.
PR: 260081
Reviewed by: allanjude, markj, jhb
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D33203
Length of some string buffers was insufficient for cases of more that
99 targets per HBA or slots per enclosure. Some others are tuned just
for better alignment. While there also fix output formatting issues.
MFC after: 1 week
Sponsored by: iXsystems, Inc.
The inclusion of 0a0f748641 broke the build with the -DNO_ROOT option.
Specifically, that commit adds some relative paths (with `..`) to METALOG
that make other tools using that log, fail afterwards (tar, makefs...).
It's been argued[1] if this is really something mtree(8) should handle more
graciously. In the meantime, fix the breakage but changing the order in which
the links are created: first in the parent directory, then in the
architecture-specific one.
We keep the architecture-specific directories an the links to the parent
directories. This is something that we might want to change in the future.
This commit is based on a concept patch by avg@.
[1] https://lists.freebsd.org/archives/dev-commits-src-all/2021-November/index.html
Reported by: bapt@, emaste@
Approved by: avg@
Fixes: 0a0f748641
Differential Revision: https://reviews.freebsd.org/D33126
It's required to specify a default boot option in order to make
petitboot's autoboot feature work.
Tested on Raptor Blackbird
Reviewed by: imp, luporl
MFC after: 2 days
Sponsored by: Instituto de Pesquisas Eldorado (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D32838
Reads of the MSI-X capabilites aren't emulated by passthru devices
yet. The guest will read the host MSI-X capabilites which could
cause issues.
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D32686
Sponsored by: Beckhoff Automation GmbH & Co. KG
On startup all virtual BARs are registered.
Additionally, the encoding bit in the virtual cmd register is set.
After that, the passthru emulation overwrites the virtual cmd register with
the physical one.
This could lead to a mismatch between registered BARs and the encoding
bits in the cmd register.
Instead of writing the physical to the virtual cmd register,
write the virtual to the physical cmd register to solve this issue.
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D32687
Sponsored by: Beckhoff Automation GmbH & Co. KG
OVMF always uses 0xC0000000 as base address for 32 bit PCI MMIO space.
For that reason, we should use that address too.
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D31051
Sponsored by: Beckhoff Automation GmbH & Co. KG
OVMF will fail, if large 64 bit BARs are used. GCD-Map doesn't cover
64 bit addresses of BARs.
OVMF assumes that 64 bit addresses of BARS are located on next 32 GB
boundary behind Top of High RAM.
This patch moves 64 bit BARs on next 32 GB boundary behind Top of High
RAM to match OVMF assumptions.
Differential Revision: https://reviews.freebsd.org/D27970
Sponsored by: Beckhoff Automation GmbH & Co. KG
yocalebo_gmail.com submitted a patch for mountd.c that
fixes the case where a username starts with a digit.
Without this patch, the username that starts with a
digit is misinterpreted as a numeric uid.
With this patch, any string that does not entirely
convert to a decimal number via strtoul() is considered
a user/group name.
Submitted by: yocalebo_gmail.com
Reviewed by: rmacklem
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D32993
Allocating a BAR will call baraddr which maps the framebuffer. No need
to allocate it explicitly on init.
Reviewed by: grehan
Sponsored by: Beckhoff Autmation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D32596
Tell the guest whether a BAR uses prefetched memory or not for
passthru devices by using the same lobits as the physical device.
Reviewed by: grehan
Sponsored by: Beckhoff Autmation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D32685
This reverts commit 020f411255.
Because now ASLR is enabled by default for 64-bit architectures
and the purpose of the installation menu is to allow choosing
additional 'mitigation'/'hardening' options that are originally
disabled, remove the ASLR knob from bsdinstall.
Discussed with: emaste
Obtained from: Semihalf
Sponsored by: Stormshield
In accordance with a SHOULD in RFC 4861, rtsol and rtsold wait a
random time between zero and one (aka MAX_RTR_SOLICITATION_DELAY)
seconds before sending a Router Solicitation, in order to avoid
network congestion if many hosts come online at once. (The
question of how many hosts would be required to cause congestion
by each sending a single packet on a Gbps+ network is left to the
reader.)
The new option -i disables this wait and instructs rtsol and rtsold
to send the Router Solicitation immediately.
Reviewed by: bz, kp (earlier version)
MFC after: 1 week
Relnotes: yes
Sponsored by: https://www.patreon.com/cperciva
Differential Revision: https://reviews.freebsd.org/D32956
This reverts commit a30e8044aa.
WITHOUT_OPENSSL build is a subset of WITHOUT_CRYPT build. It was
incorrect to label this patch as fixing WITHOUT_CRYPT when in fact
it fixes WITHOUT_OPENSSL. The build failure will be addressed in a
fix for WITHOUT_OPENSSL build.
MFC after: 1 week
Global options are defined in usr.sbin/wpa/Makefile.inc. Those in
usr.sbin/wpa/src/crypto/Makefile are duplicates of those found above.
Remove them.
MFC after: 1 week
This is a follow-up to 2697622687,
which fixed 2 out of 3 broken uses of the mirrorselect script.
Reviewed by: emaste
Approved by: emaste (src)
MFC after: 7 days
Differential Revision: https://reviews.freebsd.org/D32927
The exports file format allows export to a network using an explicit
mask or prefix length (CIDR). It also allows a network with just
a dotted address, in which case the historical mask was used.
Deprecate this usage, and warn when it is used. Document that this
is deprecated.
MFC after: 1 month
Reviewed by: rmacklem, bcr, #manpages
Differential Revision: https://reviews.freebsd.org/D32713
powerd_flags is mentioned in rc.conf(5) and can be set there and pass to
powerd.
PR: 258320
MFC after: 3 days
Reported by: Michael <michael.hmich@gmail.com>
It was a hack only needed for trpt, which can just define it locally.
This makes it possible to fix up systat which also includes the file.
Sponsored by: Rubicon Communications, LLC ("Netgate")
devinfo(8) manpage contains reference to pnpinfo(8) which existed at the
time. Remove it.
PR: 232587
MFC: 3 days
Reported by: Graham Perrin <grahamperrin@gmail.com>
PASN requires CRYPT and when built WITHOUT_CRYPT buildworld
fails. Only enable PASN when MK_CRYPT is enabled (default).
PR: 259517
Reported by: emaste
Fixes: c1d255d3ff
MFC after: 1 week
The limit of 384 maxusers for auto configuration was only imposed on
32-bit systems. Document that maxusers scales above 384 based on memory
for 64-bit systems.
PR: 204938
MFC after: 3 days
Reported by: David Höppner <0xffea@gmail.com>
I dropped the + 1 from the other two instances in each file but failed
to do so for this one, resulting in a more egregious buffer overread
than the one I was fixing (since the read character ended up in the
output if there was space).
Reported by: Jenkins
Fixes: 34fb1c133c ("Fix intra-object buffer overread for labeled msdosfs volumes")
Volume labels, like directory entries, are padded with spaces and so
have no NUL terminator. Whilst the MIN for the dsize argument to strlcpy
ensures that the copy does not overflow the destination, strlcpy is
defined to return the number of characters in the source string,
regardless of the provided dsize, and so keeps reading until it finds a
NUL, which likely exists somewhere within the following fields, but On
CHERI with the subobject bounds enabled in the compiler this buffer
overread will be detected and trap with a bounds violation.
Found by: CHERI
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D32579
r366466 (9c7bd4f198) fixed a subtle bug by stripping the trailing
'\n' appended to the output of popen("cd %s && pwd -P", p->srcdir).
Replace this cumbersome implementation with a single realpath(3) call
which avoids spawning a shell, reading from the stream with fgets(3),
and final strdup(3).
Reviewed by: arichardson, kevans
Approved by: imp
Differential Revision: https://reviews.freebsd.org/D26734
This key is Declarative and should always be sent even if the
initiator did not send it's own limit. This is similar to the fix in
fc79cf4fea but for the target side. However, unlike that fix,
failure to send the key simply results in reduced performance.
PR: 259439
Reviewed by: mav, emaste
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D32651
Previously we updated the conection's conn_max_recv_data_segment_length
only when we received a response containing MaxRecvDataSegmentLength
from the target. If the target did not send MaxRecvDataSegmentLength
then we left conn_max_recv_data_segment_length at the default (i.e.,
8192). A target could then send more data than that defult (up to our
advertised maximum), and we would drop the connection.
RFC 7143 specifies that MaxRecvDataSegmentLength is Declarative, not
negotiated. Just set conn_max_recv_data_segment_length to our
advertised value in login_negotiate().
PR: 259355
Reviewed by: mav
MFC after: 1 week
Fixes: a15fbc904a ("Alike to r312190 decouple iSCSI...")
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D32605
There is a workaround in acpidump for an old IBM laptop. This is being
hit on a modern arm64 system causing acpidump to use the wrong field
when reading a later address.
As the laptop has a 32-bit CPU the only FreeBSD support for it is i386.
As such limit the workaround to that architecture.
Reviewed by: emaste, jkim, jhb (all earlier version)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D32573
Bump the firmware version to 14.0 and set the firmware release date
to today.
Reviewed by: jhb, bz, imp
Differential Revision: https://reviews.freebsd.org/D32534
Note, this breaks compatibility with snapshots generated by older builds
of bhyve(8).
Fixes: 7fa2335347 ("bhyve: Map the MSI-X table unconditionally for passthrough")
Reported by: Greg V <greg@unrelenting.technology>
Reviewed by: grehan, bz
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D32523
In some cases when passing /dev/dspX.vpY as mixer devices, m->ci.longname and
m->ci.hw_info will be empty. Don't print any brackets and parentheses
in this case.
Differential Revision: https://reviews.freebsd.org/D32500
Submitted by: christos@
Sponsored by: NVIDIA Networking
Bhyve could emulate wrong PCI registers.
In the best case, the guest reads wrong registers and the device driver would
report some errors.
In the worst case, the guest writes to wrong PCI registers and could brick
hardware when using PCI passthrough.
According to Intels specification, low bits of CFGADR should be
ignored. Some OS like linux may rely on it. Otherwise, bhyve could
emulate a wrong PCI register.
E.g.
If linux would like to read 2 bytes from offset 0x02, following would
happen.
linux:
outl 0x80000002 at CFGADR
inw at CFGDAT + 2
bhyve:
cfgoff = 0x80000002 & 0xFF = 0x02
coff = cfgoff + (port - CFGDAT) = 0x02 + 0x02 = 0x04
Bhyve would emulate the register at offset 0x04 not 0x02.
Reviewed By: #bhyve, grehan
Differential Revision: https://reviews.freebsd.org/D31819
Sponsored by: Beckhoff Automation GmbH & Co. KG
Let's make it clear to users that -k is for configuration files.
Also, point to bhyve_config(5) in the paragraph describing the flag.
Reviewed by: jhb
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D32467
It is possible for the PBA to reside in the same page as the MSI-X
table. And, while devices are not supposed to do this, at least some
Intel wifi devices place registers in a page shared with the MSI-X
table. To handle the first case we currently map the PBA page using
/dev/mem, and the second case is not handled.
Kill two birds with one stone: map the MSI-X table BAR using the
PCIOCBARMMAP ioctl instead of /dev/mem, and map the entire table so that
accesses beyond the bounds of the table can be emulated. Regions of the
BAR not containing the table are left unmapped.
Reviewed by: bz, grehan, jhb
MFC after: 3 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D32359
My current style is to copy C for "/* NOTREACHED */" instead of spelling
out "Not reached". Make this one nominal change in this one file and the
others later.
While here, word-smith "Preload" into "Pre-load" as I believe that to
be more grammatically correct in this instance.
Also while here, fix a comment capitalization error.
Lastly, bump copyright for above changes.
Add two options, -i and -e, for filtering prometheus metrics.
Each option takes a regular expression as an argument. The provided
regex will be tested against the prometheus metric name.
The -i option includes metrics matching the given regex.
The -e option excludes metrics matching the given regex.
Sponsored by: Modirum MDPay
Sponsored by: Klara Inc.
Reviewed by: 0mp, debdrup
Differential Revision: https://reviews.freebsd.org/D32269
RPCINFO on macOS behaves different compared to other linux clients and
doesn't provide request address in rpcb structure of the
RPCBPROC_GETADDRLIST call which doesn't seem to be forbidden.
In this case RPCBIND uses RPC call's source address and picks a
closest corresponding local address. If there are no addresses in the
same subnet as the source address, return of RPCBIND may vary
depending on the order of addresses returned in getifaddrs. If a link
local precedes global address it may be returned even if the request
comes from neither a link local nor from link local in a different
scope, which will prevent services like nfs from working in tpc6
scenario on macOS clients. Issue can be seen only on FreeBSD rpcbind
port due to changes in workflow of addrmerge call.
Submitted by: Dmitry Ovsyannikov (Dmitry.Ovsyannikov@dell.com)
Reviewers: dab
Differential Revision: https://reviews.freebsd.org/D31491
Sponsored by: Dell EMC
MFC to: stable/12, stable/13
MFC after: 1 week
Make freebsd-update(8) support jails by adding the -j flag which takes
a jail jid or name as an argument. This takes advantage of the recently
added -j support to freebsd-version(8) in order to get the version of
the installed userland.
Reviewed by: dteske, kevans
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D25711
Restore ability for our syslogd to collect pre-RFC3164 formatted
messages from remote hosts that was broken with r326573.
For example, the line from Cisco SCE8000 splitted for readability:
1130: 03:37:57: %USER-6-PORT_OPERSTATUS_CHANGE_TRAP: CPU#000 trap:link
down EntityAdminState: 4 EntityAlarmStatus: 32
Such line was collected and stored before mentioned change
but silently dropped after that. Now syslogd saves it again.
Note that parsing of RFC5424 format not changed.
MFC after: 1 month
mlx* are only useful for users who have a Mellanox card.
Create a package for it so users that don't have this card can
avoid having this program.
Differential Revision: https://reviews.freebsd.org/D31795
cxgbetool is only useful for users who have a Chelsio card.
Create a package for it so users that don't have this card can
avoid having this program.
Differential Revision: https://reviews.freebsd.org/D31793
RSN Preauthentication allows a station autnetnicate to an AP that
it is not associated with yet while associated with a different AP.
This allows athentication to multiple APs simulteneously.
Tested by: philip
MFC after: 2 months
Enable WiFi 6 MBO (Multi Band Operation). MBO is a prereq to 802.11ax.
MBO allows the efficient use of multiple frequency bands (channels).
To facilitate MBO, WNM (Wireless Network Monitoring) is a prerequisite.
It is required to build.
Tested by: philip
MFC after: 2 months
If the UCL ctld parser encountered a port that used the CTL
ioctl device, it fell into a special case that had an erroneous
early return. This caused all configuration in the target
following the port attribute to be skipped. Fix this by replacing
the return with a continue so that the rest of the config is
parsed correctly.
Sponsored by: Dell EMC Isilon
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D31703
Reviewed by: bapt
Though not all include file search directories are presently needed,
add them to the search list. This is required for the next update to
wpa.
No functional change intended.
MFC after: 1 week
LK_EXCLUSIVE must be passed always, some consumers need the ability to
specify LK_NOWAIT
Reviewed by: mckusick
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D31464
Allow user to specify the IP address available for gdb debugger.
Reviewed by: jhb, grehan, rgrimes, bcr (man pages)
Differential Revision: https://reviews.freebsd.org/D29607
