If you look at the SMBIOS specification, we'll find something is
missing. In particular at offset 0Dh is supposed to be the OEM-defined
field. This should go between security and height. It is not legal to
actually skip this and will lead to other folks not properly
interpreting later parts of the table.
https://www.illumos.org/issues/14312
Reviewed by: jhb
Submitted by: Robert Mustacchi <rm@fingolfin.org>
Obtained from: ilumos
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D33682
The first time we start bhyve with a passthru device everything is fine
as on boot we do enable BARs. If a driver (unload) inside bhyve disables
the BAR(s) as some Linux drivers do, we need to make sure we re-enable
them on next bhyve start.
If we are trying to mmap a disabled BAR for MSI-X (PCIOCBARMMAP)
the kernel will give us an EBUSY.
While we were re-enabling the BAR(s) in the current code loop
cfginit() was writing the changes out too late to the real hardware.
Move the call to init_msix_table() after the register on the real
hardware was updated. That way the kernel will be happy and the
mmap will succeed and bhyve will start.
Also simplify the code given the last argument to init_msix_table()
is unused we do not need to do checks for each bar. [1]
MFC after: 3 days
PR: 260148
Pointed out by: markj [1]
Sponsored by: The FreeBSD Foundation
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D33628
If a "raw" IPv6 address (denoted by a leading '[') is used as a target
address, then 'arg' is incremented by one to skip over the '['.
However, this meant that at the end of the function the wrong address
was passed to free(). With malloc junking enabled and given suitably
small strings, malloc() would happily overwrite the correct number of
bytes with junk, but off by one byte overwriting the byte after the
allocation.
This manifested as the first byte of the 'HeaderDigest' key being
overwritten causing the key name on the wire to be sent as
'\x5eaderDigest' which the target rejected.
Reported by: Jithesh Arakkan @ Chelsio
Found with: ASAN (via WITH_ASAN=yes)
Sponsored by: Chelsio Communications
clang complains about the downcasts from struct connection to struct
ctld_connection as the alignment of struct ctld_connection is higher
on 32-bit platforms. However, the warning is in this case harmless as
the downcasts are on objects originally allocated as instances of
struct ctld_connection with suitable alignment.
Reported by: npn, gjb
Fixes: 6378393308 Add an internal libiscsiutil library.
Sponsored by: Chelsio Communications
This will be used in future changes to support large text requests
spanning multiple PDUs.
Provide wrapper functions keys_load/save_pdu that operate use a PDU's
data buffer.
Reviewed by: mav
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D33547
Move some of the code duplicated between ctld(8) and iscsid(8) into a
libiscsiutil library.
Sharing the low-level PDU code did require having a
'struct connection' base class with a method table to permit separate
initiator vs target behavior (e.g. in handling proxy PDUs).
Reviewed by: mav, emaste
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D33544
And put pkg and its keys in it.
It's easier for small image to depend on this package rather than the
larger utilities one.
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33458
There is no reason that this shouldn't be there.
Change the dependency of caroot from utilities to openssl as it's
the only command that it uses not in runtime.
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33458
This allow one to install it without having to install FreeBSD-utilities.
While here put some newsyslog.d file in their own package.
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33456
This allow one to not install syslogd and use syslog-ng or any other
syslog daemon.
While here put some syslog.d file in their own package.
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33455
While here put the periodic files for some utilities in their own
packages.
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33454
And put the mtree binary and files in it.
Useful to create small mfsroot using /etc/rc.d/var without
having to install FreeBSD-utilities.
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33442
And put the tcp-wrapper utilities in it.
Reviewed by: emaste
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33439
Move some needed binaries/libs from FreeBSD-utilities to FreeBSD_runtime.
This is everything needed to boot to multiuser with FreeBSD-rc installed.
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33435
YP is less and less used, split them to users have the choice to not
install them.
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33441
Various tools can have alternate versions elsewhere, eg: the GNU
mailutils port (a dependency of emacs*) brings /usr/local/bin/mail.
Match the preset PATH in /etc/crontab for deterministic path searches
even when run manually with a different environment.
PR: 259265
Reported by: iandstanley@gmail.com
Implement a -v option to usbconfig(8), as a shortcut for the most
frequently needed commands dump_device_desc, dump_curr_config_desc,
and show_ifdrv.
While here, implement a real -h option that has been promised by the
man page.
Use <sysexits.h> to declare the utility return codes.
Reviewed by: hselasky
Differential Revision: https://reviews.freebsd.org/D33586
MFC after: 2 weeks
* in usage(), clearly mark -i interface as optional
* both, -u busnum and -a devaddr are optional as well
* various minor man page fixes
* clearly mark those two commands that actually use -i ifaceidx
* remove unused bitfield tag got_iface
* fix indentation level according to review comment
Differential Revision: https://reviews.freebsd.org/D33579/
Reviewed by: hselasky
MFC after: 2 weeks
This makes option handling consistent with other utilities as well as
Posix rules. By that, it's no longer important whether option name and
its argument are separated by a space or not, so -d5.3 works the same
as -d 5.3.
Also, recognize either /dev/ugen or ugen as prefix to the -d argument.
Note that this removes the undocumented feature that allowed to
specify multiple -d n.m options interleaved with commands referring to
that particular device in a single run.
If one install FreeBSD on multiple disks (say 13 and CURRENT) the first created
pool will always be used.
Prompt the user for a new pool name if we detect that the default or supplied one
already exists.
Reviewed by: imp
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33331
If one install FreeBSD on the same machine multiple times in a row or
on different harddrive they have a lot of 'FreeBSD' efi boot entries added.
With this patch we now do :
- If there is no 'FreeBSD' entry we add one like before
- If there is one or more entries we ask the user if they want to delete
them all and add a new one
- If they say yes we do that
- If they say no we prompt them an inputbox so they can enter a different
entry name if they want, it defaults to 'FreeBSD'
Reviewed by: bapt, imp
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33330
Register a "block resize" callback to be notified of changes to the
backing storage for the Namespace. Use this to generate an Asynchronous
Event Notification, Namespace Attributes Changed when the guest OS
provides an Asynchronous Event Request.
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D32953
Remove reference to PCMCIA. The issue is more generic than that. Also,
it does apply to FreeBSD, so no need to hedge about some OSes. The index
won't change if no other interfaces are created after the card is
removed, so note that it may change, not will change.
Suggested by: phk
Reviewed by: gleb
Sponsored by: Netflix
libbsdialog 0.0.1 provides:
* bsddialog_conf.auto_minwidth:
* menurows is variable with autosize (properly defines max menurows)
Then tzsetup can use BSDDIALOG_AUTOSIZE keeping the dialog behavior:
min 24 cols, max 16 menurows
Differential revision: https://reviews.freebsd.org/D33397
When an EVFILT_VNODE filter event is triggered, reset it.
This fixes the issue where a virtio-blk resize event would cause the
mevent thread to consume 100% of the cpu.
Reviewed by: jhb
Differential Revision: https://reviews.freebsd.org/D33326
OVMF creates two separate .fd files, a _CODE.fd file containing
the UEFI code, and a _VARS.fd file containing a template of an
empty UEFI variable store.
OVMF decides to write variables to the memory range just below the
boot rom code if it detects a CFI flash device. So here we add
just the barest facsimile of CFI command handling to bootrom.c
that is needed to placate OVMF.
Submitted by: D Scott Phillips <d.scott.phillips@intel.com>
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D19976
MFC After: 1 week
Add an idletime user group that allows non-root users to run processes
with idle scheduling priority. Privileges are granted by a MAC policy in
the mac_priority module. For this purpose, the kernel privilege
PRIV_SCHED_IDPRIO was added to sys/priv.h (kernel module ABI change).
Deprecate the system wide sysctl(8) knob
security.bsd.unprivileged_idprio which lets any user run idle priority
processes, regardless of context. While the knob is still working, it is
marked as deprecated in the description and in the man pages.
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D33338
While here:
- Cluster flags without arguments together.
- Simplify the synopsis of the -a flag. There is no need to distinguish
between address and hostname there.
- Add a missing argument to the -a flag in the description section.
- Fix some typos.
MFC after: 3 days
This is a MAC policy module that grants scheduling privileges based on
group membership. Users or processes in the group realtime (gid 47) are
allowed to run threads and processes with realtime scheduling priority.
For timing-sensitive, low-latency software like audio/jack, running with
realtime priority helps to avoid stutter and gaps.
PR: 239125
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D33191
In addition to filtering by stack and state, allow filtering
by the congestion control module used. Choose the command line
options to be consistent with the ones of sockstat.
MFC after: 1 week
Sponsored by: Netflix, Inc.
NVMe conformance tests for the Format command failed if the
backing-storage for the bhyve device was a file instead of a Zvol. The
tests (and the specification) expect a Format to destroy all previously
written data. The bhyve NVMe emulation implements this by trimming /
deallocating all data from the backing-storage.
The blockif_candelete() function indicated the file did not support
deallocation (i.e. fpathconf(..., _PC_DEALLOC_PRESENT) returned FALSE)
even though the kernel supported file hole punching. This occurs on
builds with Capsicum enabled because blockif did not allow the
fpathconf(2) right.
Fix is to add CAP_FPATHCONF to the cap_rights_init(3) call.
PR: 260081
Reviewed by: allanjude, markj, jhb
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D33203
Length of some string buffers was insufficient for cases of more that
99 targets per HBA or slots per enclosure. Some others are tuned just
for better alignment. While there also fix output formatting issues.
MFC after: 1 week
Sponsored by: iXsystems, Inc.
The inclusion of 0a0f748641 broke the build with the -DNO_ROOT option.
Specifically, that commit adds some relative paths (with `..`) to METALOG
that make other tools using that log, fail afterwards (tar, makefs...).
It's been argued[1] if this is really something mtree(8) should handle more
graciously. In the meantime, fix the breakage but changing the order in which
the links are created: first in the parent directory, then in the
architecture-specific one.
We keep the architecture-specific directories an the links to the parent
directories. This is something that we might want to change in the future.
This commit is based on a concept patch by avg@.
[1] https://lists.freebsd.org/archives/dev-commits-src-all/2021-November/index.html
Reported by: bapt@, emaste@
Approved by: avg@
Fixes: 0a0f748641
Differential Revision: https://reviews.freebsd.org/D33126
It's required to specify a default boot option in order to make
petitboot's autoboot feature work.
Tested on Raptor Blackbird
Reviewed by: imp, luporl
MFC after: 2 days
Sponsored by: Instituto de Pesquisas Eldorado (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D32838
Reads of the MSI-X capabilites aren't emulated by passthru devices
yet. The guest will read the host MSI-X capabilites which could
cause issues.
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D32686
Sponsored by: Beckhoff Automation GmbH & Co. KG
On startup all virtual BARs are registered.
Additionally, the encoding bit in the virtual cmd register is set.
After that, the passthru emulation overwrites the virtual cmd register with
the physical one.
This could lead to a mismatch between registered BARs and the encoding
bits in the cmd register.
Instead of writing the physical to the virtual cmd register,
write the virtual to the physical cmd register to solve this issue.
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D32687
Sponsored by: Beckhoff Automation GmbH & Co. KG
OVMF always uses 0xC0000000 as base address for 32 bit PCI MMIO space.
For that reason, we should use that address too.
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D31051
Sponsored by: Beckhoff Automation GmbH & Co. KG
OVMF will fail, if large 64 bit BARs are used. GCD-Map doesn't cover
64 bit addresses of BARs.
OVMF assumes that 64 bit addresses of BARS are located on next 32 GB
boundary behind Top of High RAM.
This patch moves 64 bit BARs on next 32 GB boundary behind Top of High
RAM to match OVMF assumptions.
Differential Revision: https://reviews.freebsd.org/D27970
Sponsored by: Beckhoff Automation GmbH & Co. KG
yocalebo_gmail.com submitted a patch for mountd.c that
fixes the case where a username starts with a digit.
Without this patch, the username that starts with a
digit is misinterpreted as a numeric uid.
With this patch, any string that does not entirely
convert to a decimal number via strtoul() is considered
a user/group name.
Submitted by: yocalebo_gmail.com
Reviewed by: rmacklem
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D32993
Allocating a BAR will call baraddr which maps the framebuffer. No need
to allocate it explicitly on init.
Reviewed by: grehan
Sponsored by: Beckhoff Autmation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D32596
Tell the guest whether a BAR uses prefetched memory or not for
passthru devices by using the same lobits as the physical device.
Reviewed by: grehan
Sponsored by: Beckhoff Autmation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D32685
This reverts commit 020f411255.
Because now ASLR is enabled by default for 64-bit architectures
and the purpose of the installation menu is to allow choosing
additional 'mitigation'/'hardening' options that are originally
disabled, remove the ASLR knob from bsdinstall.
Discussed with: emaste
Obtained from: Semihalf
Sponsored by: Stormshield
In accordance with a SHOULD in RFC 4861, rtsol and rtsold wait a
random time between zero and one (aka MAX_RTR_SOLICITATION_DELAY)
seconds before sending a Router Solicitation, in order to avoid
network congestion if many hosts come online at once. (The
question of how many hosts would be required to cause congestion
by each sending a single packet on a Gbps+ network is left to the
reader.)
The new option -i disables this wait and instructs rtsol and rtsold
to send the Router Solicitation immediately.
Reviewed by: bz, kp (earlier version)
MFC after: 1 week
Relnotes: yes
Sponsored by: https://www.patreon.com/cperciva
Differential Revision: https://reviews.freebsd.org/D32956
This reverts commit a30e8044aa.
WITHOUT_OPENSSL build is a subset of WITHOUT_CRYPT build. It was
incorrect to label this patch as fixing WITHOUT_CRYPT when in fact
it fixes WITHOUT_OPENSSL. The build failure will be addressed in a
fix for WITHOUT_OPENSSL build.
MFC after: 1 week
Global options are defined in usr.sbin/wpa/Makefile.inc. Those in
usr.sbin/wpa/src/crypto/Makefile are duplicates of those found above.
Remove them.
MFC after: 1 week
This is a follow-up to 2697622687,
which fixed 2 out of 3 broken uses of the mirrorselect script.
Reviewed by: emaste
Approved by: emaste (src)
MFC after: 7 days
Differential Revision: https://reviews.freebsd.org/D32927
The exports file format allows export to a network using an explicit
mask or prefix length (CIDR). It also allows a network with just
a dotted address, in which case the historical mask was used.
Deprecate this usage, and warn when it is used. Document that this
is deprecated.
MFC after: 1 month
Reviewed by: rmacklem, bcr, #manpages
Differential Revision: https://reviews.freebsd.org/D32713
powerd_flags is mentioned in rc.conf(5) and can be set there and pass to
powerd.
PR: 258320
MFC after: 3 days
Reported by: Michael <michael.hmich@gmail.com>
It was a hack only needed for trpt, which can just define it locally.
This makes it possible to fix up systat which also includes the file.
Sponsored by: Rubicon Communications, LLC ("Netgate")
devinfo(8) manpage contains reference to pnpinfo(8) which existed at the
time. Remove it.
PR: 232587
MFC: 3 days
Reported by: Graham Perrin <grahamperrin@gmail.com>
PASN requires CRYPT and when built WITHOUT_CRYPT buildworld
fails. Only enable PASN when MK_CRYPT is enabled (default).
PR: 259517
Reported by: emaste
Fixes: c1d255d3ff
MFC after: 1 week
The limit of 384 maxusers for auto configuration was only imposed on
32-bit systems. Document that maxusers scales above 384 based on memory
for 64-bit systems.
PR: 204938
MFC after: 3 days
Reported by: David Höppner <0xffea@gmail.com>
I dropped the + 1 from the other two instances in each file but failed
to do so for this one, resulting in a more egregious buffer overread
than the one I was fixing (since the read character ended up in the
output if there was space).
Reported by: Jenkins
Fixes: 34fb1c133c ("Fix intra-object buffer overread for labeled msdosfs volumes")
Volume labels, like directory entries, are padded with spaces and so
have no NUL terminator. Whilst the MIN for the dsize argument to strlcpy
ensures that the copy does not overflow the destination, strlcpy is
defined to return the number of characters in the source string,
regardless of the provided dsize, and so keeps reading until it finds a
NUL, which likely exists somewhere within the following fields, but On
CHERI with the subobject bounds enabled in the compiler this buffer
overread will be detected and trap with a bounds violation.
Found by: CHERI
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D32579
r366466 (9c7bd4f198) fixed a subtle bug by stripping the trailing
'\n' appended to the output of popen("cd %s && pwd -P", p->srcdir).
Replace this cumbersome implementation with a single realpath(3) call
which avoids spawning a shell, reading from the stream with fgets(3),
and final strdup(3).
Reviewed by: arichardson, kevans
Approved by: imp
Differential Revision: https://reviews.freebsd.org/D26734
This key is Declarative and should always be sent even if the
initiator did not send it's own limit. This is similar to the fix in
fc79cf4fea but for the target side. However, unlike that fix,
failure to send the key simply results in reduced performance.
PR: 259439
Reviewed by: mav, emaste
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D32651
Previously we updated the conection's conn_max_recv_data_segment_length
only when we received a response containing MaxRecvDataSegmentLength
from the target. If the target did not send MaxRecvDataSegmentLength
then we left conn_max_recv_data_segment_length at the default (i.e.,
8192). A target could then send more data than that defult (up to our
advertised maximum), and we would drop the connection.
RFC 7143 specifies that MaxRecvDataSegmentLength is Declarative, not
negotiated. Just set conn_max_recv_data_segment_length to our
advertised value in login_negotiate().
PR: 259355
Reviewed by: mav
MFC after: 1 week
Fixes: a15fbc904a ("Alike to r312190 decouple iSCSI...")
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D32605
There is a workaround in acpidump for an old IBM laptop. This is being
hit on a modern arm64 system causing acpidump to use the wrong field
when reading a later address.
As the laptop has a 32-bit CPU the only FreeBSD support for it is i386.
As such limit the workaround to that architecture.
Reviewed by: emaste, jkim, jhb (all earlier version)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D32573
Bump the firmware version to 14.0 and set the firmware release date
to today.
Reviewed by: jhb, bz, imp
Differential Revision: https://reviews.freebsd.org/D32534
Note, this breaks compatibility with snapshots generated by older builds
of bhyve(8).
Fixes: 7fa2335347 ("bhyve: Map the MSI-X table unconditionally for passthrough")
Reported by: Greg V <greg@unrelenting.technology>
Reviewed by: grehan, bz
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D32523
In some cases when passing /dev/dspX.vpY as mixer devices, m->ci.longname and
m->ci.hw_info will be empty. Don't print any brackets and parentheses
in this case.
Differential Revision: https://reviews.freebsd.org/D32500
Submitted by: christos@
Sponsored by: NVIDIA Networking
Bhyve could emulate wrong PCI registers.
In the best case, the guest reads wrong registers and the device driver would
report some errors.
In the worst case, the guest writes to wrong PCI registers and could brick
hardware when using PCI passthrough.
According to Intels specification, low bits of CFGADR should be
ignored. Some OS like linux may rely on it. Otherwise, bhyve could
emulate a wrong PCI register.
E.g.
If linux would like to read 2 bytes from offset 0x02, following would
happen.
linux:
outl 0x80000002 at CFGADR
inw at CFGDAT + 2
bhyve:
cfgoff = 0x80000002 & 0xFF = 0x02
coff = cfgoff + (port - CFGDAT) = 0x02 + 0x02 = 0x04
Bhyve would emulate the register at offset 0x04 not 0x02.
Reviewed By: #bhyve, grehan
Differential Revision: https://reviews.freebsd.org/D31819
Sponsored by: Beckhoff Automation GmbH & Co. KG
Let's make it clear to users that -k is for configuration files.
Also, point to bhyve_config(5) in the paragraph describing the flag.
Reviewed by: jhb
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D32467
It is possible for the PBA to reside in the same page as the MSI-X
table. And, while devices are not supposed to do this, at least some
Intel wifi devices place registers in a page shared with the MSI-X
table. To handle the first case we currently map the PBA page using
/dev/mem, and the second case is not handled.
Kill two birds with one stone: map the MSI-X table BAR using the
PCIOCBARMMAP ioctl instead of /dev/mem, and map the entire table so that
accesses beyond the bounds of the table can be emulated. Regions of the
BAR not containing the table are left unmapped.
Reviewed by: bz, grehan, jhb
MFC after: 3 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D32359
My current style is to copy C for "/* NOTREACHED */" instead of spelling
out "Not reached". Make this one nominal change in this one file and the
others later.
While here, word-smith "Preload" into "Pre-load" as I believe that to
be more grammatically correct in this instance.
Also while here, fix a comment capitalization error.
Lastly, bump copyright for above changes.
Add two options, -i and -e, for filtering prometheus metrics.
Each option takes a regular expression as an argument. The provided
regex will be tested against the prometheus metric name.
The -i option includes metrics matching the given regex.
The -e option excludes metrics matching the given regex.
Sponsored by: Modirum MDPay
Sponsored by: Klara Inc.
Reviewed by: 0mp, debdrup
Differential Revision: https://reviews.freebsd.org/D32269
RPCINFO on macOS behaves different compared to other linux clients and
doesn't provide request address in rpcb structure of the
RPCBPROC_GETADDRLIST call which doesn't seem to be forbidden.
In this case RPCBIND uses RPC call's source address and picks a
closest corresponding local address. If there are no addresses in the
same subnet as the source address, return of RPCBIND may vary
depending on the order of addresses returned in getifaddrs. If a link
local precedes global address it may be returned even if the request
comes from neither a link local nor from link local in a different
scope, which will prevent services like nfs from working in tpc6
scenario on macOS clients. Issue can be seen only on FreeBSD rpcbind
port due to changes in workflow of addrmerge call.
Submitted by: Dmitry Ovsyannikov (Dmitry.Ovsyannikov@dell.com)
Reviewers: dab
Differential Revision: https://reviews.freebsd.org/D31491
Sponsored by: Dell EMC
MFC to: stable/12, stable/13
MFC after: 1 week
Make freebsd-update(8) support jails by adding the -j flag which takes
a jail jid or name as an argument. This takes advantage of the recently
added -j support to freebsd-version(8) in order to get the version of
the installed userland.
Reviewed by: dteske, kevans
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D25711
Restore ability for our syslogd to collect pre-RFC3164 formatted
messages from remote hosts that was broken with r326573.
For example, the line from Cisco SCE8000 splitted for readability:
1130: 03:37:57: %USER-6-PORT_OPERSTATUS_CHANGE_TRAP: CPU#000 trap:link
down EntityAdminState: 4 EntityAlarmStatus: 32
Such line was collected and stored before mentioned change
but silently dropped after that. Now syslogd saves it again.
Note that parsing of RFC5424 format not changed.
MFC after: 1 month
mlx* are only useful for users who have a Mellanox card.
Create a package for it so users that don't have this card can
avoid having this program.
Differential Revision: https://reviews.freebsd.org/D31795
cxgbetool is only useful for users who have a Chelsio card.
Create a package for it so users that don't have this card can
avoid having this program.
Differential Revision: https://reviews.freebsd.org/D31793
RSN Preauthentication allows a station autnetnicate to an AP that
it is not associated with yet while associated with a different AP.
This allows athentication to multiple APs simulteneously.
Tested by: philip
MFC after: 2 months
Enable WiFi 6 MBO (Multi Band Operation). MBO is a prereq to 802.11ax.
MBO allows the efficient use of multiple frequency bands (channels).
To facilitate MBO, WNM (Wireless Network Monitoring) is a prerequisite.
It is required to build.
Tested by: philip
MFC after: 2 months
If the UCL ctld parser encountered a port that used the CTL
ioctl device, it fell into a special case that had an erroneous
early return. This caused all configuration in the target
following the port attribute to be skipped. Fix this by replacing
the return with a continue so that the rest of the config is
parsed correctly.
Sponsored by: Dell EMC Isilon
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D31703
Reviewed by: bapt
Though not all include file search directories are presently needed,
add them to the search list. This is required for the next update to
wpa.
No functional change intended.
MFC after: 1 week
LK_EXCLUSIVE must be passed always, some consumers need the ability to
specify LK_NOWAIT
Reviewed by: mckusick
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D31464
Allow user to specify the IP address available for gdb debugger.
Reviewed by: jhb, grehan, rgrimes, bcr (man pages)
Differential Revision: https://reviews.freebsd.org/D29607
Entirely variables that should be static, save for one 'no previous
declaration' in mkskel.sh.
Reviewed by: arichardson, imp
Differential Revision: https://reviews.freebsd.org/D31610
- One (1) constify
- One (1) argument is unused
- One (1) local shadows a global
- Various globals that should be static
Reviewed by: arichardson, imp
Differential Revision: https://reviews.freebsd.org/D31608
rtsold works fine for point to point interfaces in manual mode but will
not auto-probe them.
Reviewed by: markj
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D31517
This removes the dependency on /dev/io.
PR: 251046
Reviewed by: jhb
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D31308
Upstream OpenSSL (and the KTLS backport) have switched to an opt-in
option (SSL_OP_ENABLE_KTLS) in place of opt-out modes
(SSL_MODE_NO_KTLS_TX and SSL_MODE_NO_KTLS_RX) for controlling kernel
TLS.
Reviewed by: rmacklem
Sponsored by: Netflix
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D31445
bhyve can also make use of fspacectl(2) to implement BOP_DELETE with
hole-punching. Since it is not desirable to do zero-filling for large
DEALLOCATE/UNMAP range, candelete is not set if pathconf(2) indicates
that the underlying file system does not support native
VOP_DEALLOCATE(9).
Sponsored by: The FreeBSD Foundation
Reviewed by: grehan
Differential Revision: https://reviews.freebsd.org/D28880
Setting CONFSNAME directly is a little more complicated for downstream
consumers, as any additional CONFS that are added here will inherit the
group name by default. This is perhaps arguably a design flaw in CONFS
because inheriting NAME will never give a good result when additional
files are added, but this is a low-effort change.
While we're here, pull FreeBSD.conf.${branch} out into a PKGCONF
variable so one can just drop a new repo config in entirely with a new
naming scheme. CONFSNAME gets set based on chopping anything off after
".conf", so that, e.g.:
- FooBSD.conf => FooBSD.conf
- FooBSD.conf.internal => FooBSD.conf
Reviewed by: bapt, manu
Differential Revision: https://reviews.freebsd.org/D28767
While pkg(7) add only handles a single 'add' argument, pkg-add(8) fully
handles multiple arguments.
Stop rejecting it, just turn off local-bootstrap mode and proceed to
remote bootstrap if we need it.
While we're here, check if the first argument to pkg add is even a pkg
package. If it's not, also do remote bootstrap instead. Future work
could improve this altogether by picking out a pkg package out of many
and local bootstrap then pass the rest through to the newly installed
pkg.
Reviewed by: bapt, manu (earlier version)
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D28766
If you want communications with the outside world and tell bhyve to
create an interfaces then it should be usable as well.
Rather than relying on the sysctl net.link.tap.up_on_open automatically
try to IFF_UP the opened tap device.
MFC after: 10 days
Reviewed by: markj, grehan
Differential Revision: https://reviews.freebsd.org/D31342
Previously we would display "OK, Swapped" for swapped disks,
instead of the usual disk size.
Reviewed By: allanjude
Differential Revision: https://reviews.freebsd.org/D31219
This builds on recently introduced NO_NEW_PRIVS flag to implement
unprivileged chroot, enabled by `security.bsd.unprivileged_chroot`.
It allows non-root processes to chroot(2), provided they have the
NO_NEW_PRIVS flag set.
The chroot(8) utility gets a new flag, -n, which sets NO_NEW_PRIVS
before chrooting.
Reviewed By: kib
Sponsored By: EPSRC
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D30130
Updated freebsd-update to allow it to create boot environments using
bectl should the system support it. The bectl utility was updated in
r352211 (490e13c140) to support a 'check' to determine if the system
supports boot environments. If UFS is used, the bectl check will fail
then no attempt will be made to create the boot environment.
If freebsd-update is run inside a jail, no attempt will be made to
create a boot environment.
The boot environment function will create a new environment using the
format: current FreeBSD kernel version and date/timestamp, example:
12.0-RELEASE-p10_2019-10-03_185233
This functionality can be disabled by setting 'CreateBootEnv' in
freebsd-update.conf to 'no'.
Discussed with: allanjude
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D21892
Since bsd.prog.mk includes bsd.obj.mk, and thus bsd.subdir.mk, we must
ensure all our bsd.subdir.mk-affecting variables are set before
including bsd.prog.mk. Since sbin's various Makefile.arch files add to
SUBDIR this results in those not taking effect, and presumably we also
end up not having buildworld as parallel as it should be due to the fact
that SUBDIR_PARALLEL was not being set before including bsd.prog.mk.
MFC with: 0a0f748641
Reviewed by: olivier
Differential Revision: https://reviews.freebsd.org/D31125
These were all incorrectly labeled as 2-clause BSD licenses by a
semi-automated process, when in fact they are 3-clause.
Discussed with: pfg, imp
MFC after: 2 weeks
Sponsored by: Axcient
Only ESRT and PROP tables are handled at the moment.
Submitted by: Pavel Balaev <pavel.balaev@3mdeb.com>
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D30104
Building and installing architecture-specific man pages only raises a number of
problems:
* The https://www.freebsd.org/cgi/man.cgi is incomplete. As an
example, it does not show results for pae(4). The reason for this is
that the cgi interface runs on FreeBSD amd64.
* In FreeBSD amd64 some manual pages have broken X-refs. See hptrr(4)
for an example.
* Also, we have broken links in our Release Notes. This is a
consequence of the first point. See
https://www.freebsd.org/releases/13.0R/hardware/#proc-i386.
Make MAN_ARCH default to 'all' so we build all the man pages for all the
architectures. The difference in disk space is negligible. Also link
architecture-specific man pages to their own section while keeping their own
namespace.
PR: 212290
Reported by: mj@bsdops.com
Approved by: ceri@, wosch@
MFC after: 4 weeks
Portsnap uses patches opportunistically to reduce download bandwidth: It
attempts to fetch patches which could be useful, and then makes use of
whichever patches it actually gets. (This solves the otherwise O(n^2)
issue for the server to build patches between every pair of versions.)
During the process of applying patches, portsnap prints lines of the
form "Skipping XXX-YYY (123 of 4567).\r", where the \r serves to allow
each of these (potentially many) lines to overwrite the previous one
on the console. Unfortunately, XXX and YYY here are SHA256 hashes,
resulting in these lines wrapping on reasonable-width consoles.
Replace the hashes with abbreviations of the form "0123...cdef"
(cutting 64 characters down to 11) in order to keep lines to a
reasonable length.
The rather ugly shell code here is used to avoid forking additional
processes; it would be much cleaner using sed(1), but in my testing
the sed-based alternative increases CPU time consumption by 50%.
Requested by: des
The UEFI driver included with Rocky Linux 8.4 uncovered an existing bug
in the NVMe emulation's construction of iovec's.
By default, NVMe data transfer operations use a scatter-gather list in
which all entries point to a fixed size memory region. For example, if
the Memory Page Size is 4KiB, a 2MiB IO requires 512 entries. Lists
themselves are also fixed size (default is 512 entries).
Because the list size is fixed, the last entry is special. If the IO
requires more than 512 entries, the last entry in the list contains the
address of the next list of entries. But if the IO requires exactly 512
entries, the last entry points to data.
The NVMe emulation missed this logic and unconditionally treated the
last entry as a pointer to the next list. Fix is to check if the
remaining data is greater than the page size before using the last entry
as a pointer to the next list.
PR: 256422
Reported by: dave@syix.com
Tested by: jason@tubnor.net
MFC after: 5 days
Relnotes: yes
Reviewed by: imp, grehan
Differential Revision: https://reviews.freebsd.org/D30897
After 34766aa8cb we are mounting and
unmounting devfs elsewhere already.
Reviewed by: nwhitehorn
MFC after: 1 week
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D30877
While here only compile both of them if WITH_ISCSI is set (this is the default).
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D30755
Sponsored by: Diablotin Systems
And move all the nfs related commands there.
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D30754
Sponsored by: Diablotin Systems
It can still be enabled as usual in /etc/periodic.conf
PR: 256253
Reported by: delphij
Submitted by: Miroslav Lachman <000.fbsd@quip.cz>
MFC after: 2 weeks
Old certctl commands still work for compatability, but are deprecated.
Approved by: secteam (gordon)
Differential Revision: https://reviews.freebsd.org/D30807
The "config" line in config files has been obsolete since FreeBSD 4.x
when we moved to having the boot loader pass in the root device. Remove
it.
MFC After: 1 week
Sponsored by: Netflix
When we introduced libpfctl in bnsmpd this was done incorrectly, and a
GETRULE call was replaced by pfctl_add_rule().
Change it to pfctl_get_rule().
Reviewed by: donner
MFC after: 3 days
Sponsored by: Rubicon Communications, LLC ("Netgate")
Apparently some large-file systems out there, such as my powerpc64le
Linux box, define daddr_t as a 32-bit type, which is sad and stymies
cross-building disk images. Cast daddr_t to off_t before doing
arithmetic that overflows.
Reviewed by: arichardson, jrtc27, imp
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D27458
Since 2d82b47 syslogd can't be built with `WITHOUT_INET` or
`WITHOUT_INET6` build variables set, because `iovlist_truncate` is not
defined but used.
This change wraps the problematic `iovlist_truncate` call within ifdef
directive. It's compiled out in this situation...
Pull Request: https://github.com/freebsd/freebsd-src/pull/475
Reviewed by: imp@ (commit message slightly tweaked)
Register a resize callback with the blockif interface. When the
callback fires, update the size of the disk and notify the guest via a
configuration change interrupt.
Reviewed by: grehan, markj
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D30506
This allows device models to assert VirtIO interrupts for reasons
other than publishing changes to a VirtIO ring such as configuration
changes.
Reviewed by: grehan, markj
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D30505
Allow clients of blockif to register a resize callback handler. When
a callback is registered, register an EVFILT_VNODE kevent watching the
backing store for a change in the file's attributes. If the size has
changed when the kevent fires, invoke the clients' callback.
Currently resize detection is limited to backing stores that support
EVFILT_VNODE kevents such as regular files.
Reviewed by: grehan, markj
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D30504
This allows registering an event to watch for changes to a file's
attributes. This is a bit imperfect as it would be nice to have a way
to determine if an fd can use EVFILT_VNODE successfully. mevent's
current structure does not permit that and a failure to register a
single kevent impacts several other kevents.
Reviewed by: grehan, markj
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D30503
Change mevent_add*() to synchronously add the new kevent. This
permits reporting event registration failures to the caller and avoids
failing the registration of other, unrelated events queued up in the
same batch.
Reviewed by: grehan, markj
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D30502
Last an(4) devices have been End Of Life and End Of Sale in 2007.
Time to remove this driver.
Differential Revision: https://reviews.freebsd.org/D30680
Reviewed by: imp (earlier version), emaste (earlier version)
Sponsored by: Diablotin Systems
This will be used to inject keyboard/mouse input events into a guest.
The command line syntax is:
-s <slot>,virtio-input,/dev/input/eventX
Reviewed by: jhb (bhyve), grehan
Obtained from: Corvin Köhne <C.Koehne@beckhoff.com>
MFC after: 3 weeks
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D30020
This check was too aggressive: it is fine if SizeOfHeaders is exactly
equal to the size of the DOS stub + PE header + section table. Despite
being wrong this code typically worked for most EFI binaries because
SizeOfHeaders is rounded up to a multiple of FileAlignment, which is
often large (e.g., 512 bytes for the FreeBSD loader) so most binaries
made it through.
Reviewed by: imp@
Sponsored by: Netflix
Pull Request: https://github.com/freebsd/freebsd-src/pull/445
Incorrectly linked built-in wpa functions resulted in overwriting
sm->ctx->set_rekey_offload with garbage. It was initialized correctly
however it changed after wpa_supplicant became a daemon.
No SIGBUS violations reported by dhw@ were experienced during testing
of the original commit by msyelf or philip@.
Reported by: dhw
Tested by: dhw
MFC after: 2 months
X-MFC with: 25ecdc7d52
The default is to create a zroot that consumes the whole disk because if
used with geli(8) this makes sense.
Without geli(8), I like to keep my data pool separate from my system
pool.
This is different than ZFSBOOT_BOOT_POOL_SIZE which is named bootpool.
Reviewed by: allenjude
Pull Request: https://github.com/freebsd/freebsd-src/pull/53
Differential Revision: https://reviews.freebsd.org/D30588
Also improve temporary file usage in 200.accounting, add an xref to
zstd(1) to newsyslog.conf.5, and clarify in periodic.conf that
"daily accounting" means process accounting and "monthly accounting"
is login accounting.
PR: 253868
Reviewed by: allanjude
Approved by: blackend (mentor)
Differential Revision: https://reviews.freebsd.org/D29267
The pciconf command fails to emit newlines when particular ecap field
values are seen. Fix them up. This has been seen on several systems at
$JOB. The documentation for PCI capabilities says that capability
type 0 should not be used once the spec for PCI capabilities was
published, but that seems more wishful-thinking than reality. pciconf
also chooses not to print fields related to field values that are
zero, but it seems several of these fields are zero on actual
hardware.
Reviewed by: vangyzen, imp, Bret Ketchum (Bret.Ketchum@dell.com)
Sponsored by: Dell EMC Isilon
Submitted by: Robert Herndon (Robert.Herndon@dell.com)
Differential Revision: https://reviews.freebsd.org/D30441
The current WPA build assumes a flat namespace. However the latest sources
from w1.fi now have a duplicate config.c, in two separate subdirectories.
The flat namespace will overwrite config.o with the output from the most
recently modified config.c, of which there are two of them.
This commit resolves this problem by building each component in
wpa's src subdirectory tree into its own .a archive, just as the w1.fi
upstream build as used by the port does. The advantages of this approach
are:
1. Duplicate source file names, i.e. config.c in the wpa_supplicant
direcory and another config.c in src/utils in the next wpa
will result in both compiles writing to the same .o file.
2. This restructure simplifies maintanence. A develper needs only to add
new files as identified by git status in the vendor branch to the
appropriate Makefile within the usr.sbin/wpa tree. This also reduces
time required to prepare a new import and should reduce error.
3. The new wpa build structure more closely represents the build as
performed by the upstream tarball.
This is in preparation for the next wpa update from w1.fi.
Reviewed by: philip
Tested by: philip
MFC after: 2 months
Differential Revision: https://reviews.freebsd.org/D30372
There is a single consumer, the pmc utility, that clearly has knowledge
of which counters it is expecting. Remove this function and have it
use common counter aliases instead.
Reviewed by: gnn
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D30528
Check if the pmu utils are supported rather than carrying a
machine-dependent #ifdef.
Reviewed by: gnn, ray, emaste
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D30526
- Allow firmware downloading for hw_variant #8;
- Enter manufacturer mode for setting of event mask;
- Handle multi-event response on HCI commands for 7260;
This allows to remove kludge with skipping of 0xfc2f opcode.
- Disable patch and exit manufacturer mode on downloading failure;
- Use default firmware if correct firmware file is not found;
Reviewed by: Philippe Michaud-Boudreault <pitwuu_AT_gmail_DOT_com>
MFC after: 1 week
Tested by: arrowd
Differential revision: https://reviews.freebsd.org/D30543
The bsdinstall script target did not have the infrastructure to fetch
distfiles from a remote server the way the interactive installer does
on e.g. bootonly media. Solve this by factoring out the parts of the
installer that deal with fetching missing distributions into a new
install stage called 'fetchmissingdists', which is called by both the
interactive and scripted installer frontends.
In the course of these changes, cleaned up a few other issues with
the fetching of missing distribution files and added a warning if
fetching the MANIFEST file, which is used to verify the integrity of
the distribution files. We should at some point add cryptographic
signatures to MANIFEST so that it can be fetched safely if not present
on the install media (which it is for bootonly media).
Initial patch by: Vinícius Zavam
PR: 255659, 250928
Reviewed by: dteske
MFC after: 4 weeks
Differential Revision: https://reviews.freebsd.org/D27121
Move initialization of the mutex/condition variables required by the
save/restore feature to their own function.
The unix domain socket that facilitates communication between bhyvectl
and bhyve doesn't rely on these variables in order to be functional.
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D30281
When starting, ntpd calls setrlimit(2) to limit maximum size of its
stack. The stack limit chosen by ntpd is 200K, so when stack gap
is enabled, the stack gap is larger than this limit, which results
in ntpd crashing.
Submitted by: Dawid Gorecki <dgr@semihalf.com>
Reviewed by: cy, imp
Obtained from: Semihalf
Sponsored by: Stormshield
Differential Revision: https://reviews.freebsd.org/D29553
kldxref(8) is the only tool that can dump FreeBSD kernel module
metadata, with the -d option. But the command line requirements for that
are inconvenient, since parser requires that argv[1] is a directory
containing whole set of modules to generate xref file.
For -d, allow argv[0] to be a regular file, now it is possible to do e.g.
$ kldxref -d /boot/kernel/ufs.ko
to see only ufs.ko metadata.
Reviewed by: emaste
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D30368
While here, fix all links to older en_US.ISO8859-1 documentation
in the src/ tree.
PR: 255026
Reported by: Michael Büker <freebsd@michael-bueker.de>
Reviewed by: dbaio
Approved by: blackend (mentor), re (gjb)
MFC after: 10 days
Differential Revision: https://reviews.freebsd.org/D30265
The HAVE_ZFS macro was dropped from the Makefile during the OpenZFS
merge, bring it back.
While here, drop unused WARNS setting.
PR: 255616
Reported by: Michael Büker <freebsd@michael-bueker.de>
Submitted by: Michael Büker <freebsd@michael-bueker.de>
Fixes: 9e5787d228
Reviewed by: markj
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D30221
Unlike attended installations, scripted installs did not mount non-ZFS
partitions when ZFS root (via zfsboot) was selected. Since this included
the ESP, the EFI loader was not installed. Copy logic from the
attended-install path to make this work.
PR: 255824, 255081
MFC after: 1 week
Obtained from: Mark Huizer
This is a step towards sending messages (other than suspend/checkpoint)
from bhyvectl to bhyve.
Introduce a new struct, ipc_message - this struct stores the type of
message and a union containing message specific structures for the type
of message being sent.
Reviewed by: grehan
Differential Revision: https://reviews.freebsd.org/D30221
'show adapter' now shows PCIe width and speed, IOC Speed, and the
temperature of the controller.
A new command, 'set ncq', is added.
It enables or disables SATA NCQ in the NVRAM of the card.
Its current setting is added to 'show adapter' as well.
PR: 254841
MFC after: 2 weeks
Relnotes: perhaps
Do not assume that the kernel boot time is invariant. It is not. FreeBSD
uses the formula:
wall_time = boot_time + uptime
where uptime is monotinically increasing and boot_time is adjusted to
get the proper time of day. FreeBSD offers a way to retrieve the uptime
directly, so use that instead of trying to compute it by subtracting
boot_time from wall_time.
Sponsored by: Netflix
Reviewed by: cy@
Differential Revision: https://reviews.freebsd.org/D30114
To use it comms/iwmbt-firmware port should be updated to 20210315 version.
Submitted by: Philippe Michaud-Boudreault <pitwuu@gmail.com>
Tested by: Helge Oldach <freebsd@oldach.net>
Reviewed by: wulf
PR: 228787
MFC after: 2 weeks
The revision D25604 capsicumize traceroute6. For UDP the send socket was
changed from SOCK_DGRAM to SOCK_RAW and thus the UDP checksum need be
calculated by application itself other than the kernel.
outpacket is filled with zeros by line 707, thus the first round the UDP
checksum is correct. But subsequent rounds outudp->uh_sum will be left
with garbage.
PR: 255507
Reviewed by: ae, markj, tuexen
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D30042
open_memstream(3) is a standard way to obtain the same feature we do get
by using sbuf(9) (aka dynamic size buffer), switching to using it makes
pkg(7) more portable, and reduces its number of dependencies.
Reviewed by: manu
Differential Revision: https://reviews.freebsd.org/D30005
Modify /usr/sbin/pkg to use environment variables specified in pkg.conf.
This allows control over underlying libraries like fetch(3), which can
be configured by setting HTTP_PROXY.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D29820
Allow up to 5 labels to be set on each rule.
This offers more flexibility in using labels. For example, it replaces
the customer 'schedule' keyword used by pfSense to terminate states
according to a schedule.
Reviewed by: glebius
MFC after: 2 weeks
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D29936
This fixes a bug in an earlier change to move tree rotation to
the end of the update where the step to make room for the new
preworld tree was deleting the old "current" tree instead of
the old "preworld" tree.
Reported by: olivier, dhw
Fixes: 0611aec3cf
MFC after: 2 weeks
Fixes segfault with the command `bhyve -s 0,virtio-scsi`, which is used
by some third party software to probe bhyve for virtio-scsi support.
Reviewed by: jhb
MFC after: 1 day
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D29926
A slight mix-up of the flags means this case isn't triggered when it
should be. Now, `pmcstat -s event -t 1234` will print the correct
error message.
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
For an infrequent event, pmcstat may report (u_long)-1 for CPUs where
the counter was never incremented. Just set this to zero, instead.
ev->ev_count is passed as the 'count' argument to pmc_allocate(3), but
this wasn't always the case.
Reviewed by: gnn
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D29887
Run the 'build_tree' function inside of a subshell and trap SIGINT to
return an error to the caller. This allows callers to gracefully
cleanup a partially created tree.
While here, redirect stdout/stderr of the subshell to the log file
instead of applying redirections individually to each command executed
while building the tree.
Reviewed by: imp
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D29844
etcupdate has had a somewhat nasty race condition since its creation
in that its state machine can get very confused if it is interrupted
while building the tree to compare against. This is exacerbated by
the fact that etcupdate doesn't emit any output while building the
tree which can take several seconds (especially in recent years with
the addition of the tree-wide buildconfig/installconfig passes).
To mitigate this, always install a new tree into a temporary directory
created via mktemp as was previously done only for dry-runs via -n.
The existing trees are only rotated and the new tree installed as
/var/db/etcupdate/current after the update command has completed.
Reported by: dim, np (and many others)
Reviewed by: imp
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D29843
This fix mprutil on big endian platforms, as follow up of D25785.
Flash operations are still not working, such as MPI2_FUNCTION_FW_UPLOAD
failing due to timeout.
Firmware version used during tests: 16.00.01.00
Submitted by: Andre Fernando da Silva <andre.silva@eldorado.org.br>
Reviewed by: luporl, Sreekanth Reddy <sreekanth.reddy@broadcom.com> (by e-mail)
Sponsored by: Eldorado Research Institute (eldorado.org.br)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D26040
Use NULL for pointers instead of '0' (though hey are the same thing in
these cases). Ditto for using the zero character '\0' instead of a naked
0 (ditto).
Reviewed by: markj@
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D29847
Apparently new dialog does not like the height of 2 for the
timebox widget, use 0 (minimum size) instead.
Do the same for calendar widget as it does not change the
appearance and to prevent possible future surprises.
Reviewed by: bapt
Differential Revision: https://reviews.freebsd.org/D29720
- Use appropriate mdoc macros
- Document that tcp= is a synonym to rfb= (tcp is used in the examples,
but never mentioned)
- Clarify the IP address specification
MFC after: 2 weeks
- Set width of the list to the longest key word for readability.
- Separate descriptions of amd_hostbridge and hostbridge emulations.
Also, wordsmith their descriptions for consistency with other entries.
- Use Cm instead of Li for command modifiers.
- Do not stylize AMD with Li, there's no need to do it.
- Mention COM3 and COM4 in the definition of lpc.
- Fix a typo in the definition of ahci-hd ("hard drive" instead of
"hard-drive").
MFC after: 2 weeks
Also, remove the macros of the nested list which contained slot,
emulation and conf. This decreases the indention of the -s description.
It was necessary to clean up the slot description.
MFC after: 2 weeks
- Describe "-l help" separately for readability.
- List all the supported comX devices explicitly
- Use Cm instead of Ar for command modifiers (i.e., literal values a
user can specify as an argument to the command).
- Explain where to get more information about the possible values of the
conf argument.
MFC after: 2 weeks
In particular:
- Sort short options to align with style(9)
- Add two missing flags: -G and -r
- Drop unnecessary angle brackets for consistency
- Rename the "vm" argument to vmname for consistency with the manual
page
MFC after: 2 weeks
There is no need to squeeze all the possible options into one synopsis
entry. Let "-l help" and "-s help" be listed separately.
While here, keep -s and its arguments on the same line.
MFC after: 2 weeks
Some people expect jail.conf(5) to have a list of jail parameters.
jail(8) contains a comprehensive list of all parameters to be used during jail
invocation or in jail.conf.
Highlighting where to look for jail parameters seems a reasonable solution.
PR: 244569
Reported by: joneum@
Approved by: 0mp (manpages, mentor)
Reviewed by: debdrup
Differential Revision: https://reviews.freebsd.org/D28701
b51f459a20 resulted in a mismerge
due to having to do a remerge because my tree was over a week out of
date. Changes that were made to fix the build were lost in the remerge
resulting in build errors that were fixed a week ago.
This is necessary for use with supervision, e.g. runit.
I chose -F simply because that is what the folks at LPRng use.
Approved by: pfg, gad, ngie
Differential Revision: https://reviews.freebsd.org/D29566
Without the -w option, Windows guests crash on boot. This is caused by a rdmsr
of MSR_IA32_FEATURE_CONTROL. Windows checks this MSR to determine enabled VMX
features. This MSR isn't emulated in bhyve, so a #GP exception is injected
which causes Windows to crash.
Fix by returning a rdmsr of MSR_IA32_FEATURE_CONTROL with Lock Bit set and
VMX disabled to informWindows that VMX isn't available.
Reviewed by: jhb, grehan (bhyve)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D29665
FreeBSD's version of the config(8) utility is based on 4.3BSD not
4.4BSD. So correct the mentioned paper in the SEE ALSO section.
Reported by: imp
Reviewed by: imp
X-MFC-with: 2b59392cb0
Differential Revision: https://reviews.freebsd.org/D29701
The check needs to be in the public routine (gdb_cpu_suspend()), not
in the internal routine called from various places
(_gdb_cpu_suspend()). All the other callers of _gdb_cpu_suspend()
already check gdb_active, and this breaks the use of snapshots when
the debug server is not enabled since gdb_cpu_suspend() tries to lock
an uninitialized mutex.
Reported by: Darius Mihai, Elena Mihailescu
Reviewed by: elenamihailescu22_gmail.com
Fixes: 621b509048
Differential Revision: https://reviews.freebsd.org/D29538
Add the System Management BIOS Baseboard (or Module) Information
a.k.a. Type 2 structure to the SMBIOS emulation.
Reviewed by: rgrimes, bcran, grehan
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D29657
This is intended to be used with memory mapped IO, e.g. from
bus_space_map with no flags, or pmap_mapdev.
Use this new memory type in the map request configured by
resource_init_map_request, and in pciconf.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D29692
Stop using the kernel's struct pf_rule, switch to libpfctl's pfctl_rule.
Now that we use nvlists to communicate with the kernel these structures
can be fully decoupled.
Reviewed by: glebius
MFC after: 4 weeks
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D29644
Rather than int flags we ++, use booleans for all command line args.
No functional change intended.
Reviewed by: markj@
Sponsored by: Netflix, Inc
Differential Revision: https://reviews.freebsd.org/D29621
Due to how we're parsing UUIDs, we were disallowing setting, printing or
deleting any UEFI variable with a '-' in it when you attempted to do that
operation with the exact name (wildcard reporting was unaffected). Fix the
parser to loop over all the dashes in the name and only give up when all
possible matches are exhausted.
Reviewed by: markj@
Sponsored by: Netflix, Inc
Differential Revision: https://reviews.freebsd.org/D29620
Add -q/--quiet flag to the command line. With it, errors are not reported at
all. Instead nothing is printed and the exit code is non-zero.
Reviewed by: markj
Sponsored by: Netflix, Inc
Differential Revision: https://reviews.freebsd.org/D29619
Commit 621b509048 introduced a regression
in legacy virtio-9p config parsing by not initializing *sharename to
NULL. As a result, "sharename != NULL" check in the first iteration fails
and bhyve exits with "virtio-9p: more than one share name given".
Fix by adding NULL back.
Approved by: grehan
With new ZFS prefetcher improvements it is no longer needed to fully
serialize reads to reach decent prediction hit rate. Softer variant
only creates small time window to reduce races instead of completely
blocking following reads while previous is running. It much less
hurts the performance in case of prediction miss.
MFC after: 1 month
By default, makefs(8) has very few spare inodes in its output images,
which is fine for static filesystems, but not so great for VM images
where many more files will be added. Make makefs(8) use the same
default settings as newfs(8) when creating images with free space --
there isn't much point to leaving free space on the image if you
can't put files there. If no free space is requested, use current
behavior of a minimal number of available inodes.
Reviewed by: manu
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D29492
Some architectures - armv7, armv8 and riscv use VM_MEMATTR_DEVICE
when mapping device registers in kernel. Do the same in pciconf.
On armada8k SoC all reads from BARs mapped with hitherto attribute
(VM_MEMATTR_UNCACHEABLE) return 0xff's.
Submitted by: Kornel Duleba <mindal@semihalf.com>
Reviewed by: kib
Obtained from: Semihalf
Sponsored by: Marvell
Differential revision: https://reviews.freebsd.org/D29603
freebsd-update compares the dates on man pages with mandoc.db, and if
any newer pages are found it regenerates mandoc.db.
Previously, if mandoc.db did not already exist the check failed and
freebsd-update then failed to create one. Now, check that mandoc.db
exists before performing the check for newer pages.
Reported by: bdrewery (in D10482)
Reviewed by: gordon
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D29575
Follow-up to the removal of the mcov from kernel.
Noted by: mckusick
Reviewed by: mckusick
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D29563
This allows the xhci tablet device to be recognized and a PCI device
instantiated.
Reviewed by: jhb
Fixes: 621b509048 Refactor configuration management in bhyve.
MFC after: 3 months.
and other equivalent ways to request mcount-based profiling, like
'profile N' in kernel config.
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D29529
An NFSv4 only configuration does not register with
rpcbind(). Without this patch a failure to rpcb_unset()
is reported when the daemon is terminated for this case.
This is harmless noise, but this patch avoids calling
rpcb_unset() for the NFSv4 only case, avoiding the noise.
When called with "-d", it still does the rpcb_unset(),
assuming that the configuration might have been
changed to NFSv4 only and unregistering with
rpcbind() might still be needed.
Reviewed by: freqlabs
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D29449
- Always use distinct sockets for send and recv
- Limit rights on the recv socket
For ICMP6 we were using the same socket for both send and receive, and
we limited rights on the socket such that it's impossible to receive
anything.
PR: 254623
Diagnosed by: Zhenlei Huang <zlei.huang@gmail.com>
Reviewed by: oshogbo
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D29523
The old prototype requires callers to inspect flags of each descriptors
to get the starting position of host-writable iovecs.
vq_getchain() is changed to return a virtio request with the number of
host-readable iovecs and host-writable iovecs instead. Callers can avoid
boilerplate code of getting the start offset of host-writable iovecs.
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
Reviewed by: afedorov
Approved by: philip (mentor)
Differential Revision: https://reviews.freebsd.org/D29433
The previous commit added the handler to parse the command line
options for virtio-scsi devices but forgot to set the correct function
pointer to point to the handler.
Reported by: vangyzen
Reviewed by: vangyzen
Fixes: 621b509048
Differential Revision: https://reviews.freebsd.org/D29438
When lockd is configured with a debug level of > 0 and foreground == 0,
the process is daemonized with a truth noclose argument to daemon().
This doesn't seem to be the desired behavior because that prevents
stdout and stderr from being closed, however, stdout and stderr aren't
used anywhere else. Furthermore, the man pages state that with a higher
debug level it will use the syslog facilities to do so.
Submitted by: Caleb St. John
Discussed with: rmacklem
MFC after: 3 days
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D29415
If the disk parameter "DEFAULT" is set in place of an actual device name,
or no disk is specified for the PARTITIONS parameter, the installer will
follow the logic used in the automatic-partitioning mode, in which it
will either provide a selection dialog for one of several disks if
several are present or automatically select it if there is only one. This
simplifies the creation of fully-automatic installation media for
hardware or VMs with varying disk names.
Suggested by: Egoitz Aurrekoetxea <egoitz@sarenet.es>
MFC after: 3 weeks
Relnotes: yes
There are scenarios where an NFS client will mount an NFSv4 export
without specifying a callback address.
When running nfsdumpstate under this circumstance, the column output is
shifted incorrectly which places the "ClientID" value underneath the
"Clientaddr" column.
This diff is a small cosmetic change that prints a blank in the
"Clientaddr" column and ensures the data for the columns are aligned
appropriately.
Submitted by: Caleb St. John
Reviewed by: sef (previous version)
MFC after: 3 days
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D18958
"device" is already used as the generic PCI-level name of the device
model to use (e.g. "hostbridge"). The result was that parsing
"hostbridge" as an integer failed and the host bridge used a device ID
of 0. The EFI ROM asserts that the device ID of the hostbridge is not
0, so booting with the current EFI ROM was failing during the ROM
boot.
Fixes: 621b509048