r238211:
Support TARGET_ARCH=armv6 and TARGET_ARCH=armv6eb
This adds a new TARGET_ARCH for building on ARM
processors that support the ARMv6K multiprocessor
extensions. In particular, these processors have
better support for TLS and mutex operations.
This mostly touches a lot of Makefiles to extend
existing patterns for inferring CPUARCH from ARCH.
It also configures:
* GCC to default to arm1176jz-s
* GCC to predefine __FreeBSD_ARCH_armv6__
* gas to default to ARM_ARCH_V6K
* uname -p to return 'armv6'
* make so that MACHINE_ARCH defaults to 'armv6'
It also changes a number of headers to use
the compiler __ARM_ARCH_XXX__ macros to configure
processor-specific support routines.
Submitted by: Tim Kientzle <kientzle@freebsd.org>
This makes our naming scheme more closely match other systems and the
expectations of much third-party software. MIPS builds which are little-endian
should require and exhibit no changes. Big-endian TARGET_ARCHes must be
changed:
From: To:
mipseb mips
mipsn32eb mipsn32
mips64eb mips64
An entry has been added to UPDATING and some foot-shooting protection (complete
with warnings which should become errors in the near future) to the top-level
base system Makefile.
This (almost) gives us the address space back (at the bottom) that we lost
at the top.
Region 0 has traditionally been reserved for IA-32 emulation, which has not
been of great interest. By starting 64-bit processes at the 4G boundary we
at least preserve some of the advantages:
1. Any invalid pointer cast (from int to pointer and back) will still
always fail and not only when more than 4GB of memory is in use.
2. Memory sharing between 64-bit and 32-bit processes is still possibly
by using addresses < 4G.
x86 CPU support, better support for powerpc64, some new directives, and
many other things. Bump __FreeBSD_version, and add a note to UPDATING.
Thanks to the many people that have helped to test this.
Obtained from: projects/binutils-2.17
These changes are needed to fix n32 compile after the recent change of
mips n32 MACHINE_ARCH to mipsn32eb/mipsn32el.
Reviewed by: imp, bz (earlier version)
Implement MACHINE_ARCH=mips64e[lb] to build N64 images. This replaces
MACHINE_ARCH=mipse[lb] TARGET_ABI=n64.
MACHINE_ARCH=mipsn32e[lb] has been added, but currently requires
WITHOUT_CDDL due to atomic issues in libzfs. I've not investigated
this much, but implemented this to preserve as much of the TARGET_ABI
functionality that I could. Since its presence doesn't affect the
working cases, I've kept it in for now.
Added mips64e[lb] to make universe, so more kernels build.
And I think this (finally) closes the curtain on the tbemd tree.
it exists in order to allow arch-specific overrides. This fixes the
binutils (and world) build on powerpc64 after recent TBEMD merges.
Reviewed by: imp
TARGET_BIG_ENDIAN is now completely dead, except where it was
originally supposed to be used (internally in the toolchain building).
TARGET_ARCH has changed in three cases:
(1) Little endian mips has changed to mipsel.
(2) Big endian mips has changed to mipseb.
(3) Big endian arm has changed to armeb.
Some additional changes are needed to make 'make universe' work on arm
and mips after this change, so those are commented out for now.
UPDATING information will be forthcoming. Any remaining rough edges
will be hammered out in -current.
This is done by prepending the file to elfxx-ia64, not appending it.
Additionally, reduce diffs between Makefile.amd64 and Makefile.ia64;
instead of echo'ing defines in Makefiles, just add the needed define to
elf-fbsd-brand.c directly, as it is only used for amd64 and ia64.
tc-sparc-fixed.c entirely, since the fix has been integrated into
contrib/binutils/gas/config/tc-sparc.c by upstream. Define TARGET_OS
in addition to the other TARGET_XXX defines.
a variety of bugs in binutils related to handling of 64-bit PPC ELF,
provides a GCC configuration for 64-bit PowerPC on FreeBSD, and
associated build systems tweaks.
Obtained from: projects/ppc64
of of 4 causes _end to be word aligned, which will be returned by sbrk.
malloc(3), when compiled for n32, expects sbrk to return an 8-byte aligned
value.
Approved by: rrs (mentor)
o) Add TARGET_ABI to the MIPS toolchain build process. This sets the default
ABI to one of o32, n32 or n64. If it is not set, o32 is assumed as that is
the current default.
o) Set the default GCC cpu type to any specified TARGET_CPUTYPE. This is
necessary to have a working "cc" if e.g. mips64 is specified, as binutils
will refuse to link objects using different ISAs in some cases.
o) Add support for n32 and n64 ABIs to binutils and GCC.
o) Add additional required libgcc2 stubs for n32 and n64.
o) Add support for the "mips64r2" architecture to GCC. Add the "octeon"
o) When static linking, wrap default libraries in --start-group and
--end-group. This is required for static linking to work on n64 with the
interdependencies between libraries there. This is what other OSes that
support n64 seem to do, as well.
o) Fix our GCC spec to define __mips64 for 64-bit targets, not __mips64__, the
former being what libgcc, etc., check and the latter seemingly being a
misspelling of a hand merge from a Linux spec.
o) When no TARGET_CPUTYPE is specified at build time, make GCC take the default
ISA from the ABI. Our old defaults were too liberal and assumed that 64-bit
ABIs should default to the MIPS64 ISA and that 32-bit ABIs should default to
the MIPS32 ISA, when we are supporting or will support some systems based on
earlier 32-bit and 64-bit ISAs, most notably MIPS-III.
o) Merge a new opcode file (and support code) from a later version of binutils
and add flags and code necessary to support Octeon-specific instructions.
This should also make merging opcodes for other modern architectures easier.
Reviewed by: imp
r195575 | imp | 2009-07-10 12:24:02 -0600 (Fri, 10 Jul 2009) | 2 lines
quick hack for the problem gonzo is seeing.
r195530 | imp | 2009-07-10 01:18:30 -0600 (Fri, 10 Jul 2009) | 5 lines
Always build all 4 emulators into the mips toolchain.
# I think we have a gcc spec file issue with abi=64 since I have to do other
# hacks to get it mostly kinda right.
source upgrades by falling back to GNU ar(1) as necessary. Option
WITH_BSDAR is gone. Option _WITH_GNUAR to aid in upgrades is *not*
supposed to be set by the user.
Stop bootstrapping BSD ar(1) on the next __FreeBSD_version bump, as
there are no known bugs in it. Bump __FreeBSD_version to anticipate
this and to flag the switch to BSD ar(1), should it be needed for
something.
Input from: obrien, des, kaiw
binutils ar and ranlib to gar and granlib, respectively.
* Introduce a temporary variable WITH_GNUAR as a safety net.
When buildworld with -DWITH_GNUAR, GNU binutils ar and ranlib
will install as default ones and 'BSD' ar will be disabled.
* Bump __FreeBSD_version to reflect the import of 'BSD' ar(1).
Approved by: jkoshy (mentor)
bad code at -O2. Since this is likely caused by the low-level
optimizer, testing TARGET_ARCH rather than MACHINE_ARCH should
handle ia64 cross-compilation as well. With this work-around
in place, we can release using the current GCC and Binutils
code at the default optimization level on ia64.
Approved by: re (kensmith)
that need to be activated specifically for the case of a native linker
actually are enabled. Specifically, this makes ld(1) look for shared
libraries in LD_LIBRARY_PATH in the native case, as documented in the
man page.
PR: gnu/96481
Approved by: re (kensmith)
MFC after: 2 weeks
Only PowerPC supports both 32-bit and 64-bit targets and the
BFD_DEFAULT_TARGET_SIZE is used by the binutils code to reflect
the preferred ABI. We define BFD_DEFAULT_TARGET_SIZE for all
platforms, but based on the build machine. As such 64-bit build
machines defined BFD_DEFAULT_TARGET_SIZE incorrectly for 32-bit
targets, but since this only affects PowerPC it went unnoticed
for a long time.
The fix is to define BFD_DEFAULT_TARGET_SIZE based on the target
architecture.
PR: amd64/102996
MFC after: 1 month
This includes removing all vestiges of the old not-really supported
ability to build cross tools targeting non-FreeBSD systems, such as
m68k Lynx and NetBSD. Move as much duplicated code from platform
Makefiles into the shared Makefiles. Add a simple mechanism for
specifying ELF 'ldscripts'. Also share as many .h files as possible
(now a single bfd.h vs. one per platform).
achieve on ia64, because we need to generate the ELF64/ia64 code and
simply tag elf-fbsd-brand.c at the end of it.
This hasn't actually been tested beyond trivial compilation testing.
A buildworld has been started and it's time I wait for my changes to
loop back to my local repo anyway. I'll get back to this in a couple
of hours...
o BFD_VERSION_DATE now reflects the release date of 2.15,
o BFD_VERSION now has the correct version number.
Previous values reflected 2.14.92 from a week prior to release.
While here, fix a whitespace (tab) nit.
stable ld.so. We need to revisit the rtld-elf/sparc64/rtld_start.S
rev. 1.5 and rtld-elf/sparc64/rtld_machdep.h rev. 1.5, which was
suppose to allow stock Binutils 2.13 (and later) to be used.
