If you want QLogic to look at a potential f/w problem for FC cards, you really
have to provide them info in the format they expect. This involves dumping
a lot of hardware registers (> 300 16 bit registers) and a lot of SRAM
(> 128KB minimum). Thus all of this code is #ifdef protected which will
become an option so that the memory allocation of where to dump the crash
image is pretty expensive. It's worth it if you have a reproducible problem
because they have some tools that can tell them, given the f/w version,
the precise state of everything.
MFC after: 1 week
Appologies for making this one bulk commit, but I have tested all these
changes together and don't want to break anything by trying to disentangle
it.
o Make debugging a sysctl/tunable
o Remove flags word from yenta chip info, it is unused
o Make 16-bit card I/O range and 32-bit card I/O range tunables
o Start the rename of pccbb to cbb to match NetBSD by misc renames.
o Kill the now bogus list of softcs to create kthread. Instead, just
create the kthread in the attach routine.
o Remove sc_ from some structure names. It isn't needed.
o Refine chipset lookup code.
o Match generic PCI <-> CardBus bridges. We specifically don't generically
match PCI PCMCIA bridges because they are not, with one exception, yenta
devices.
o Add some comments about the why we need to have a function table ala
OLDCARD
o The PCI interrupt routing by using the ExCA registers is needed for
for all bridges, per the spec, not just TI ones.
o Collapse TOPIC95 and TOPIC95B.
o Using the ToPIC 97 and 100 datasheets, try to support these bridges better,
but more work is needed.
o Generally clarify some XXX comments and add them in a few places where
things didn't look right to me.
o Move interrupt generating register access until after we establish an ISR.
o Add support for YV and XV cards. X and Y are numbers to be determined
later (but maybe never).
o factor powerup code for 16-bit and 32-bit cards.
o When a card supports more than one voltage, prefer the lowest supported
volage. Windows does this, and MS's design guides imply this is the
right thing to do.
o Document race between kthread_exit(0) and kldunload's unmapping of pages
that John Baldwin and I discovered.
o Debounce the CSC interrupt a little better.
o When a 16-bit card is inserted when we don't have a pccard child,
warn about it better. Ditto for 32-bit card.
o Ack ALL the interrupt bits that we get, not just 0x1.
o maybe a couple minor style nits corrected.
reaquiring it. In the same vein, don't bother dropping the thread cred
when goinf ot userland. We are guaranteed to nned it when we come back,
(which we are guaranteed to do).
Reviewed by: jhb@freebsd.org, bde@freebsd.org (slightly different version)
the structure definitions come from NetBSD to make it easier to share card
definitions. The driver only acts as a shim between the pci bus and the
sio driver. Later pci parallel ports could also be supported through this
driver. Support for most single and multiport pci serial cards should be
as simple as adding its definition to pucdata.c
Tested with the following pci cards:
Moxa Industio CP-114, 4 port RS-232,RS-422/485
Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports
Netmos NM9835 PCI-2S-550, 2 port RS-232
- clobbering of jsp's $Id$ by FreeBSD's old $Id$.
- long lines in recent KSE changes (procfs_ctl.c).
- other style bugs in KSE changes (most related to an shadowed variable
in procfs_status.c -- the td in the outer scope is obfuscated by
PFS_FILL_ARGS).
Approved by: des
- clobbering of jsp's $Id$ by FreeBSD's old $Id$.
- lost Berkeley id in procfs_dbregs.c
- long lines in recent KSE changes.
- various gratuitous differences between procfs_*regs.c.
patch from a year ago: give file flags their own type. This does not
(yet) change the type used by system calls or library functions.
The underlying type was chosen to match what is returned by stat().
- Remove change for my local configuration that slipped in with
the last commit; I am having problems booting when multiple SCSI
disks are attached, so I will change this part as soon as I find
a solution, anyway.
- Remove two constants that were needed in conjuction with the
NetBSD disklabel header. Use the FreeBSD equivalents.
To boot from NetBSD/sparc64 partitions, define LABELOFFSET to
be 128.
- Do not use the complete open firmware path to filter out cdrom drives.
No path containing "cdrom" is detected as a disk now.
- Simplify some code.
be compiled. Old tty ioctls are still used (possibly ifdef'ed) in at
least the following programs in the src tree:
atc des ee fontedit gdb gdbserver lock ntp perl5 tcsh telnet top vttest
rp.c:
Unremoved used variables so that the support for old ioctls actually
compiles.
Not tested at runtime by: bde
ACPI_NO_SEMAPHORES, ASR_MEASURE_PERFORMANCE, AST_DEBUG, ATAPI_DEBUG,
ATA_DEBUG, BKTR_ALLOC_PAGES, BROOKTREE_ALLOC_PAGES, CAPABILITIES,
COMPAT_SUNOS, CV_DEBUG, MAXFILES, METEOR_TEST_VIDEO, NDEVFSINO,
NDEVFSOVERFLOW, NETGRAPH_BRIDGE, NETSMB, NETSMBCRYPTO, PFIL_HOOKS,
SIMOS, SMBFS, VESA_DEBUG, VGA_DEBUG.
Start using #! to comment out negative options and ## to comment out
broken options.
atapi-all.c:
Fixed rotted bits that were hiding under ATAPI_DEBUG.
atapi-cd.c:
#include "opt_ata.h" so that ACD_DEBUG is actually visible.
ata/atapi-tape.c
#include "opt_ata.h" so that AST_DEBUG is actually visible.
In order of importance:
+ each cluster now uses private data structures (filtering and
local address tables) so you can treat them as fully independent
switches. This part of the work was supported by:
Cisco Systems, Inc. - NSITE lab, RTP, NC.
+ cleaned up the handling of configuration, so the system will behave
much better when real or pseudo devices are dynamically attached
or detached. It should also not panic anymore on systems with large
number of devices, closing a few existings PRs on the topic.
+ while at it, add support for VLAN. This means that a FreeBSD box
can now work as a real VLAN switch, with trunk interfaces etc.
As an example:
ifconfig vlan0 vlan 3 vlandev dc0
ifconfig vlan1 vlan 4 vlandev dc0
net.link.ether.bridge_cfg="vlan0:3,dc1:3,vlan1:4,dc1:4"
uses dc0 as a trunk interface, and dc1 and dc3 as ports on vlans 3 and 4
You get the idea...
NOTA BENE: by default bridge_cfg is initialised to "" so even if
you enable bridging, no packets will be bridged until you set the
list of interfaces on which you want this to happen.
+ large restructuring of the code, moving private vars and types from
bridge.h to bridge.c.
+ added a lot of comments to the code to explain how to use it.
This escaped because DEVICE_POLLING is disabled in LINT being
not compatible with SMP. In fact, it is only a runtime problem,
so if we could recognize that we are building a LINT kernel
we could as well disable the check for SMP being defined.
Reported-by: Joe Clarke
boot sequence.
The new pmap.c is based on NetBSD's newer pmap.c (for the mpc6xx processors)
which is 70% faster than the older code that the original pmap.c was based
on. It has also been based on the framework established by jake's initial
sparc64 pmap.c.
There is no change to how far the kernel gets (it makes it to the mountroot
prompt in psim) but the new pmap code is a lot cleaner.
Obtained from: NetBSD (pmap code)
break scheduling because negative priorities were most fixed up by
converting kg_pri_user back to the correct type.
Fixed some style bugs in previous commit (non-terminated sentence fragments
and regressions in comments).
SMP we'd like as much feedback as possible from users about possible
locking problems as early as possible.
To negate most of the performance impact I've also enabled
WITNESS_SKIPSPIN. I've done this as we've been running WITNESS
over the spinlock code for a while without incident and it goes a
long way to making the performance problems of WITNESS much more
bearable.
Users who should be running current should know about turning WITNESS
off for performance reasons.
That said and done, WITNESS could/should be made into a tuneable,
but we'll leave that as an excersize to those that want to disable
it without a kernel recompile.
descriptors. This simplifies code for jumbo frames.
- Cleaned up coding conventions to make code more unix-like.
- Cleaned up code in if_em_fxhw.c and if_em_phy.c.
Added relevant comments.
MFC after: 1 week
support for managing both streaming caches on psycho pairs).
Use explicit bus space accesses instead of mapping the device memory into
kva.
Move DVMA allocation to the map creation/dma memory allocation functions.
disable interrupts completely, and stxa_sync(), which performs a store
immediately followed by a membar #Sync with interrupts disabled (this
is needed for writes to diagnostic registers).
slower, and may be impeding adoption of -CURRENT by developers. We
recommend turning on WITNESS by default on crash boxes, and when doing
locking development. It will probably get turned on by default for a week
or two following any major locking commits, also.
Approved by: all and sundry (jhb, phk, ...)
feature bit on newer Athlon CPUs if the BIOS has forgotten to enable
it.
This patch was constructed using some info made available by John
Clemens at http://www.deater.net/john/PavilionN5430.html
Reviewed by: -audit
MFC after: 3 weeks
More cleanups of the RAID1 failure mode code.
Add functionality that writes the changed RAID config setup
back to the disks (in controller BIOS specific format), so
that a reboot will make the BIOS pick up the changed config.
1) We shouldn't continue when we get a RX complete because we ack it
and the TX complete.
2) Fix a couple of spl leaks
(why splbio is needed in ISR, I cannot understand).
MFC after: 3 days
Also, add some 'const's to supress warnings. (Submitted back to NetBSD).
The original logs from NetBSD:
----------------------------
revision 1.90
date: 2001/12/03 01:47:12; author: augustss; lines: +4 -4
Handle vendor/product lookup with a common routine.
----------------------------
revision 1.89
date: 2001/12/02 23:25:25; author: augustss; lines: +18 -2
Add a subroutine to search for a vendor/product pair.
----------------------------
Original NetBSD log messages are:
----------------------------
revision 1.23
date: 2001/12/12 15:48:18; author: augustss; lines: +132 -114
Add a scanner quirk for keeping the pipes open between device opening.
Idea from Enami.
----------------------------
revision 1.22
date: 2001/12/03 01:47:13; author: augustss; lines: +8 -16
Handle vendor/product lookup with a common routine.
----------------------------
revision 1.21
date: 2001/12/01 09:42:39; author: enami; lines: +4 -4
Shorten wmesg so that they can be distinguished in ps/top output.
----------------------------
revision 1.12
date: 2001/01/23 14:04:14; author: augustss; lines: +7 -1
Make sure driver attach/detach events are generated in a
consistent manner.
----------------------------
PR:
Submitted by:
Reviewed by:
Approved by:
Obtained from:
MFC after:
Almost all .c files have to include <sys/systm.h> for more than its
declaration of panic(), so little is gained from declaring panic() in
a wrong place. This probably depends on missing garbage collection
of the includes of <sys/systm.h> that were added to get snprintf()
declared for old versions of the ktr macros.
From the NetBSD logs:
revision 1.45
date: 2001/11/29 11:07:12; author: augustss; state: Exp; lines: +12 -2
Plug a memory leak in an error case.
----------------------------
revision 1.43
date: 2001/10/19 15:30:25; author: nathanw; state: Exp; lines: +5 -3
Match printers that report their interface as IEEE 1284 in addition to
bidirectional.
to perform an ownership test in revoke(). This is also required for
MAC hooks so that the vnode lock is held during a call to the MAC
framework. Release the lock before calling VOP_REVOKE().
Discussed with: phk, mckusick
- Collected i486 identification codes in one place like
586 and 686.
- Merged two cases (0x470 and 0x490) for `Enhanced Am486DX4
Write-Back.'
- Replaced `unknown' into `Unknown'.
Submitted by: chi@bd.mbn.or.jp (Chiharu Shibata)
o Modify the system call syntax for extattr_{get,set}_{fd,file}() so
as not to use the scatter gather API (which appeared not to be used
by any consumers, and be less portable), rather, accepts 'data'
and 'nbytes' in the style of other simple read/write interfaces.
This changes the API and ABI.
o Modify system call semantics so that extattr_get_{fd,file}() return
a size_t. When performing a read, the number of bytes read will
be returned, unless the data pointer is NULL, in which case the
number of bytes of data are returned. This changes the API only.
o Modify the VOP_GETEXTATTR() vnode operation to accept a *size_t
argument so as to return the size, if desirable. If set to NULL,
the size will not be returned.
o Update various filesystems (pseodofs, ufs) to DTRT.
These changes should make extended attributes more useful and more
portable. More commits to rebuild the system call files, as well
as update userland utilities to follow.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, NAI Labs
o Call bus_generic_setup_intr and check its return value. Don't setup
func until we successfully get the interrupt from our parent.
o Add comments about some maybe questionable stuff so I can check later
to make sure that it really is that way.
o Don't allow INTR_TYPE_FAST. Since we are sharing the interrupt between
CSC and the functions, they can't be FAST because fast interrupts can't
be shared.
o Add the same workaround for resume that we have in OLDCARD.
o Also, return the error from bus_generic_resume rather than ignoring it.
of I/O in 1.5. It looks like I got it right only for some of the
cases. Instead, allow ISA addresses as a special case. Most PCI
bridges decode this range. I need to investigate PCI bridges better
to know if this is always true or not, but for now assume that it is
since that seems to be the most common case.
# We need to allocate addresses better for the pccard stuff...
Submitted by: phk, mitsunaga-san
- Fix null-pointer dereference introduced when snapshotting
was introduced. This occured because unlike the previous code,
vn_start_write() doesn't always return a non-NULL mp, as
filesystems may not support the VOP_GETWRITEMOUNT() call. For
now, rely on two pointers, so that vn_finished_write() works
properly.
- Fix locking problems on exit, introduced at some past time,
some when snapshots came in, where a vnode might not be
unlocked before being vrele'd in various error situations.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, NAI Labs
sys/time.h:137: integer constant out of range
sys/time.h:137: warning: decimal integer constant is so large that it is unsigned
sys/time.h:153: integer constant out of range
sys/time.h:153: warning: decimal integer constant is so large that it is unsigned
