slots to probe. Problems have been reported in this area, lets hope this
bandaid helps.
!! Owners of EISA-equipped Alpha machines are requested to at least
!! boot-test a 6-BETA build and report back to the Alpha list. Thanks!
Approved by: re (scottl)
Suggested by: ticso
as they both interact with the tty code (!MPSAFE) and may sleep if the
tty buffer is full (per comment).
Modify all consumers of uprintf() and tprintf() to hold Giant around
calls into these functions. In most cases, this means adding an
acquisition of Giant immediately around the function. In some cases
(nfs_timer()), it means acquiring Giant higher up in the callout.
With these changes, UFS no longer panics on SMP when either blocks are
exhausted or inodes are exhausted under load due to races in the tty
code when running without Giant.
NB: Some reduction in calls to uprintf() in the svr4 code is probably
desirable.
NB: In the case of nfs_timer(), calling uprintf() while holding a mutex,
or even in a callout at all, is a bad idea, and will generate warnings
and potential upset. This needs to be fixed, but was a problem before
this change.
NB: uprintf()/tprintf() sleeping is generally a bad ideas, as is having
non-MPSAFE tty code.
MFC after: 1 week
This kernel config briefly describes some of the major MAC policies
available on FreeBSD. The hope is that this will raise the awareness
about MAC and get more people interested.
Discussed with: scottl
constraint is actually only allowed for register operands. Instead, use
separate input and output memory constraints.
Education from: alc
Reviewed by: alc
Tested on: i386, alpha
MFC after: 1 week
it to __MINSIGSTKSZ. Define MINSIGSTKSZ in <sys/signal.h>.
This is done in order to use MINSIGSTKSZ for the macro PTHREAD_STACK_MIN
in <pthread.h> (soon <limits.h>) without having to include the whole
<sys/signal.h> header.
Discussed with: bde
variables rather than void * variables. This makes it easier and simpler
to get asm constraints and volatile keywords correct.
MFC after: 3 days
Tested on: i386, alpha, sparc64
Compiled on: ia64, powerpc, amd64
Kernel toolchain busted on: arm
syscalls.master for the master list and the Alpha/OSF1 compat ABI to be
consistent with all the other compat ABIs where 'make sysent' already
works.
MFC after: 3 days
address, writting non-canonical address can cause kernel a panic,
by restricting base values to 0..VM_MAXUSER_ADDRESS, ensuring
only canonical values get written to the registers.
Reviewed by: peter, Josepha Koshy < joseph.koshy at gmail dot com >
Approved by: re (scottl)
further changes and fixes in the future:
- Use aliases via macros rather than duplicated inlines wherever possible.
- Move all the aliases to the bottom of these files and the inline
functions to the top.
- Add various comments.
- On alpha, drop atomic_{load_acq,store_rel}_{8,char,16,short}().
- On i386 and amd64, don't duplicate the extern declarations for functions
in the two non-inline cases (KLD_MODULE and compiler doesn't do inlines),
instead, consolidate those two cases.
- Some whitespace fixes.
Approved by: re (scottl)
It can be used to panic the kernel by giving too big value.
Fix it by moving allocation and size verification into kern_getfsstat().
This even simplifies kern_getfsstat() consumers, but destroys symmetry -
memory is allocated inside kern_getfsstat(), but has to be freed by the
caller.
Found by: FreeBSD Kernel Stress Test Suite: http://www.holm.cc/stress/
Reported by: Peter Holm <peter@holm.cc>
vm_page's machine-dependent fields. Use this function in
vm_pageq_add_new_page() so that the vm_page's machine-dependent and
machine-independent fields are initialized at the same time.
Remove code from pmap_init() for initializing the vm_page's
machine-dependent fields.
Remove stale comments from pmap_init().
Eliminate the Boolean variable pmap_initialized from the alpha, amd64,
i386, and ia64 pmap implementations. Its use is no longer required
because of the above changes and earlier changes that result in physical
memory that is being mapped at initialization time being mapped without
pv entries.
Tested by: cognet, kensmith, marcel
- Implement sampling modes and logging support in hwpmc(4).
- Separate MI and MD parts of hwpmc(4) and allow sharing of
PMC implementations across different architectures.
Add support for P4 (EMT64) style PMCs to the amd64 code.
- New pmcstat(8) options: -E (exit time counts) -W (counts
every context switch), -R (print log file).
- pmc(3) API changes, improve our ability to keep ABI compatibility
in the future. Add more 'alias' names for commonly used events.
- bug fixes & documentation.
audit event identifier associated with each system call, which will
be stored by makesyscalls.sh in the sy_auevent field of struct sysent.
For now, default the audit identifier on all system calls to AUE_NULL,
but in the near future, other BSM event identifiers will be used. The
mapping of system calls to event identifiers is many:one due to
multiple system calls that map to the same end functionality across
compatibility wrappers, ABI wrappers, etc.
Submitted by: wsalamon
Obtained from: TrustedBSD Project
such, the segments pointer in the DMA tag will always be NULL. In
bus_dmamap_load(), temporarily point the segments pointer in the
DMA tag to a local variable so that we don't dereference a NULL
pointer. Reset the segments pointer to NULL after calling the
callback function with it.
PR: alpha/30486
MFC after: 1 week
i8253reg.h, and add some defines to control a speaker.
- Move PPI related defines from i386/isa/spkr.c into ppireg.h and use them.
- Move IO_{PPI,TIMER} defines into ppireg.h and timerreg.h respectively.
- Use isa/isareg.h rather than <arch>/isa/isa.h.
Tested on: i386, pc98
in other codes. Add cpu_set_user_tls, use it to tweak user register
and setup user TLS. I ever wanted to merge it into cpu_set_kse_upcall,
but since cpu_set_kse_upcall is also used by M:N threads which may
not need this feature, so I wrote a separated cpu_set_user_tls.
into _bus.h to help with name space polution from including all of bus.h.
In a few days, I'll commit changes to the MI code to take advantage of thse
sepration (after I've made sure that these changes don't break anything in
the main tree, I've tested in my trees, but you never know...).
Suggested by: bde (in 2002 or 2003 I think)
Reviewed in principle by: jhb
critical_enter() and critical_exit() are now solely a mechanism for
deferring kernel preemptions. They no longer have any affect on
interrupts. This means that standalone critical sections are now very
cheap as they are simply unlocked integer increments and decrements for the
common case.
Spin mutexes now use a separate KPI implemented in MD code: spinlock_enter()
and spinlock_exit(). This KPI is responsible for providing whatever MD
guarantees are needed to ensure that a thread holding a spin lock won't
be preempted by any other code that will try to lock the same lock. For
now all archs continue to block interrupts in a "spinlock section" as they
did formerly in all critical sections. Note that I've also taken this
opportunity to push a few things into MD code rather than MI. For example,
critical_fork_exit() no longer exists. Instead, MD code ensures that new
threads have the correct state when they are created. Also, we no longer
try to fixup the idlethreads for APs in MI code. Instead, each arch sets
the initial curthread and adjusts the state of the idle thread it borrows
in order to perform the initial context switch.
This change is largely a big NOP, but the cleaner separation it provides
will allow for more efficient alternative locking schemes in other parts
of the kernel (bare critical sections rather than per-CPU spin mutexes
for per-CPU data for example).
Reviewed by: grehan, cognet, arch@, others
Tested on: i386, alpha, sparc64, powerpc, arm, possibly more
the type of object represented by the handle argument.
- Allow vm_mmap() to map device memory via cdev objects in addition to
vnodes and anonymous memory. Note that mmaping a cdev directly does not
currently perform any MAC checks like mapping a vnode does.
- Unbreak the DRM getbufs ioctl by having it call vm_mmap() directly on the
cdev the ioctl is acting on rather than trying to find a suitable vnode
to map from.
Reviewed by: alc, arch@
FreeBSD based on aue(4) it was picked by OpenBSD, then from OpenBSD ported
to NetBSD and finally NetBSD version merged with original one goes into
FreeBSD.
Obtained from: http://www.gank.org/freebsd/cdce/
NetBSD
OpenBSD
This is mentioned in the Handbook but it is not as obvious to new
users why bpf is needed compared to the other largely self-explanatory
items in GENERIC.
PR: conf/40855
MFC after: 1 week
sys/bus_dma.h instead of being copied in every single arch. This slightly
reorders a flag that was specific to AXP and thus changes the ABI there.
The interface still relies on bus_space definitions found in <machine/bus.h>
so it cannot be included on its own yet, but that will be fixed at a later
date. Add an MD <machine/bus_dma.h> for ever arch for consistency and to
allow for future MD augmentation of the API. sparc64 makes heavy use of
this right now due to its different bus_dma implemenation.
OR the physical address with alpha_XXX_dmamap_or to get the DMA address,
like the name of the variable suggests. However, while we were doing
this correctly in the alpha_XXX_dmamap() macro, the busdma code added
the variable to the physical address instead of or'ing it. Fortunately
and if my math is not entirely wrong, you would need more than 128GB of
RAM and a device able to do DMA in 64bits to experience the bug.
Spotted by: cognet
place.
This moves the dependency on GCC's and other compiler's features into
the central sys/cdefs.h file, while the individual source files can
then refer to #ifdef __COMPILER_FEATURE_FOO where they by now used to
refer to #if __GNUC__ > 3.1415 && __BARC__ <= 42.
By now, GCC and ICC (the Intel compiler) have been actively tested on
IA32 platforms by netchild. Extension to other compilers is supposed
to be possible, of course.
Submitted by: netchild
Reviewed by: various developers on arch@, some time ago
the semantics in that the returned filename to use is now a kernel
pointer rather than a user space pointer. This required changing the
arguments to the CHECKALT*() macros some and changing the various system
calls that used pathnames to use the kern_foo() functions that can accept
kernel space filename pointers instead of calling the system call
directly.
- Use kern_open(), kern_stat(), kern_lstat(), kern_fstat(), kern_access(),
kern_truncate(), kern_pathconf(), kern_execve(), kern_select(),
kern_setitimer(), kern_getitimer(), kern_statfs(), and kern_fstatfs().
Silence on: alpha@
former is callable from user space and the latter from the kernel one. Make
kernel version take additional argument which tells if the respective call
should check for additional restrictions for sending signals to suid/sugid
applications or not.
Make all emulation layers using non-checked version, since signal numbers in
emulation layers can have different meaning that in native mode and such
protection can cause misbehaviour.
As a result remove LIBTHR from the signals allowed to be delivered to a
suid/sugid application.
Requested (sorta) by: rwatson
MFC after: 2 weeks
uses the i8237 without trying to emulate the PC architecture move
the register definitions for the i8237 chip into the central include
file for the chip, except for the PC98 case which is magic.
Add new isa_dmatc() function which tells us as cheaply as possible
if the terminal count has been reached for a given channel.
copies arguments into the kernel space and one that operates
completely in the kernel space;
o use kernel-only version of execve(2) to kill another stackgap in
linuxlator/i386.
Obtained from: DragonFlyBSD (partially)
MFC after: 2 weeks
the last action of kern_exit(). Instead, it is a MD callout to cleanup
per-process state during exit.
- Add notes of concern to Alpha and ia64 about the possible need to drop
fp state in cpu_thread_exit() rather than in cpu_exit() since it is
per-thread state rather than per-process.
from 4.x kernel config files. User's wishing to upgrade from 4.x to 6
will need to go through 5.x, or grab this script from there. These
scripts will remain in RELENG_5...
on entry and it assumes the responsibility for releasing the page queues
lock if it must sleep.
Remove a bogus comment from pmap_enter_quick().
Using the first change, modify vm_map_pmap_enter() so that the page queues
lock is acquired and released once, rather than each time that a page
is mapped.
In such cases, the busying of the page and the unlocking of the
containing object by vm_map_pmap_enter() and vm_fault_prefault() is
unnecessary overhead. To eliminate this overhead, this change
modifies pmap_enter_quick() so that it expects the object to be locked
on entry and it assumes the responsibility for busying the page and
unlocking the object if it must sleep. Note: alpha, amd64, i386 and
ia64 are the only implementations optimized by this change; arm,
powerpc, and sparc64 still conservatively busy the page and unlock the
object within every pmap_enter_quick() call.
Additionally, this change is the first case where we synchronize
access to the page's PG_BUSY flag and busy field using the containing
object's lock rather than the global page queues lock. (Modifications
to the page's PG_BUSY flag and busy field have asserted both locks for
several weeks, enabling an incremental transition.)
specified register, but a pointer to the in-memory representation of
that value. The reason for this is twofold:
1. Not all registers can be represented by a register_t. In particular
FP registers fall in that category. Passing the new register value
by reference instead of by value makes this point moot.
2. When we receive a G or P packet, both are for writing a register,
the packet will have the register value in target-byte order and
in the memory representation (modulo the fact that bytes are sent
as 2 printable hexadecimal numbers of course). We only need to
decode the packet to have a pointer to the register value.
This change fixes the bug of extracting the register value of the P
packet as a hexadecimal number instead of as a bit array. The quick
(and dirty) fix to bswap the register value in gdb_cpu_setreg() as
it has been added on i386 and amd64 can therefore be removed and has
in fact been that.
Tested on: alpha, amd64, i386, ia64, sparc64
operation (by subtracting the absolute result from 0), don't test
for overflow.
This avoids an arithmetic exception when dividing LONG_MIN by 1:
This is the only case that causes overflow, and the resulting value
is correct under 2's compliment arithmetic.
PR: 72024
Approved by: dwmalone@
Obtained from: NetBSD
MFC after: 4 days
is a PAL ID, while PCPU_GET(cpuid) is a FreeBSD CPU ID. The FreeBSD CPU
ID of the BSP is always zero, so use that to see which CPU should run the
full clock functions.
mp_machdep.c was using UAREA_PAGES to allocate something that isn't a
U area, and that there seems to be an implicit assumption that the PCB
is just past the end of the kernel stack.
Reviewed by: arch@
associated with each processor. This ID is inferred from the index
of the pcs structure in the hwprb.
- Give Alpha CPUs FreeBSD CPU IDs more like other architectures where the
boot processor is always CPU 0 and the other processors are numbered
1 ... N. List active CPUs in the system in cpu_mp_announce() as well.
Silence on: alpha@
