The header exports the following:
- Definition of struct tcb.
- Helpers to get/set the tcb for the current thread.
- TLS_TCB_SIZE (size of TCB)
- TLS_TCB_ALIGN (alignment of TCB)
- TLS_VARIANT_I or TLS_VARIANT_II
- TLS_DTV_OFFSET (bias of pointers in dtv[])
- TLS_TP_OFFSET (bias of "thread pointer" relative to TCB)
Note that TLS_TP_OFFSET does not account for if the unbiased thread
pointer points to the start of the TCB (arm and x86) or the end of the
TCB (MIPS, PowerPC, and RISC-V).
Note also that for amd64, the struct tcb does not include the unused
tcb_spare field included in the current structure in libthr. libthr
does not use this field, and the existing calls in libc and rtld that
allocate a TCB for amd64 assume it is the size of 3 Elf_Addr's (and
thus do not allocate room for tcb_spare).
A <sys/_tls_variant_i.h> header is used by architectures using
Variant I TLS which uses a common struct tcb.
Reviewed by: kib (older version of x86/tls.h), jrtc27
Sponsored by: The University of Cambridge, Google Inc.
Differential Revision: https://reviews.freebsd.org/D33351
After a round of cleanups in late 2020, all definitions are
functionally identical.
This removes a rotted __aligned(8) on arm. It was added in
b7112ead32 and was intended to align the
args member so that 64-bit types (off_t, etc) could be safely read on
armeb compiled with clang. With the removal of armev, this is no
longer needed (armv7 requires that 32-bit aligned reads of 64-bit
values be supported and we enable such support on armv6). As further
evidence this is unnecessary, cleanups to struct syscall_args have
resulted in args being 32-bit aligned on 32-bit systems. The sole
effect is to bloat the struct by 4 bytes.
Reviewed by: kib, jhb, imp
Differential Revision: https://reviews.freebsd.org/D33308
This definition enables callers to estimate remaining space on the
kstack, and take action on it. Notably, it enables optimizations in the
GEOM and netgraph subsystems to directly dispatch work items when there
is sufficient stack space, rather than queuing them for a worker thread.
Implement it for riscv, arm, and mips. Remove the #ifdefs, so it will
not go unimplemented elsewhere.
PR: 259157
Reviewed by: mav, kib, markj (previous version)
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D32580
in_cksum() and related routines are implemented separately for each
platform, but only i386 and arm have optimized versions. Other
platforms' copies of in_cksum.c are identical except for style
differences and support for big-endian CPUs.
Deduplicate the implementations for the rest of the platforms. This
will make it easier to implement in_cksum() for unmapped mbufs. On arm
and i386, define HAVE_MD_IN_CKSUM to mean that the MI implementation is
not to be compiled.
No functional change intended.
Reviewed by: kp, glebius
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D33095
The minidump code is written assuming that certain global state will not
change, and rightly so, since it executes from a kernel debugger
context. In order to support taking minidumps of a live system, we
should allow copies of relevant global state that is likely to change to
be passed as parameters to the minidumpsys() function.
This patch does the work of parameterizing this function, by adding a
struct minidumpstate argument. For now, this struct allows for copies of
the kernel message buffer, and the bitset that tracks which pages should
be dumped (vm_page_dump). Follow-up changes will actually make use of
these arguments.
Notably, dump_avail[] does not need a snapshot, since it is not expected
to change after system initialization.
The existing minidumpsys() definitions are renamed, and a thin MI
wrapper is added to kern_dump.c, which handles the construction of
the state struct. Thus, calling minidumpsys() remains as simple as
before.
Reviewed by: kib, markj, jhb
Sponsored by: Juniper Networks, Inc.
Sponsored by: Klara, Inc.
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D31989
The implementation of the progress bar is simple, but duplicated for
most minidump implementations. Extract the common bits to kern_dump.c.
Ensure that the bar is reset with each subsequent dump; this was only
done on some platforms previously.
Reviewed by: markj
MFC after: 2 weeks
Sponsored by: Juniper Networks, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D31885
This reverts commit b684d812fc.
It causes an issue on a pfsense routing workload where memory
fragmentation prevents the necessary consecutive pages from being
readily available.
Reported by: pfsense (mjg, scottl)
Approved by: ian
MFC after: 1 day
Differential Revision: https://reviews.freebsd.org/D31244
Move the common kernel function signatures from machine/reg.h to a new
sys/reg.h. This is in preperation for adding PT_GETREGSET to ptrace(2).
Reviewed by: imp, markj
Sponsored by: DARPA, AFRL (original work)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19830
These ones were unambiguous cases where the Foundation was the only
listed copyright holder (in the associated license block).
Sponsored by: The FreeBSD Foundation
which is the place to put MD asserts about allocated pages.
On amd64, verify that allocated page does not belong to the kernel
(text, data) or early allocated pages.
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D31121
See 3f6867ef63 for additional context.
It is also needed for OpenZFS performance and stability.
Reviewed by: ian (arm), imp
Differential Revision: https://reviews.freebsd.org/D31244
The syscall number is stored in the same register as the syscall return
on amd64 (and possibly other architectures) and so it is impossible to
recover in the signal handler after the call has returned. This small
tweak delivers it in the `si_value` field of the signal, which is
sufficient to catch capability violations and emulate them with a call
to a more-privileged process in the signal handler.
This reapplies 3a522ba1bc with a fix for
the static assertion failure on i386.
Approved by: markj (mentor)
Reviewed by: kib, bcr (manpages)
Differential Revision: https://reviews.freebsd.org/D29185
The syscall number is stored in the same register as the syscall return
on amd64 (and possibly other architectures) and so it is impossible to
recover in the signal handler after the call has returned. This small
tweak delivers it in the `si_value` field of the signal, which is
sufficient to catch capability violations and emulate them with a call
to a more-privileged process in the signal handler.
Approved by: markj (mentor)
Reviewed by: kib, bcr (manpages)
Differential Revision: https://reviews.freebsd.org/D29185
Remove any attempt to use _arm_memcpy and _arm_bzero. It was used by some
xscale platforms to provide functions to use the DMA engine for big
zeroing/copying work, but those platforms are long gone, and it's unlikely
anything else will use those.
Many of these typedefs are the same across all architectures or can
be set based on an architecture-independent compiler-provided macro
(e.g. __SIZEOF_SIZE_T__). These macros have been available since GCC 4.6
and Clang sometime before 3.0 (godbolt.org does not have any older clang
versions installed).
I originally considered using the compiler-provided `__FOO_TYPE__` directly.
However, in order to do so we have to check that those match the previous
typedef exactly (not just that they have the same size) since any change
would be an ABI break. For example, changing `long` to `long long` results
in different C++ name mangling. Additionally, Clang and GCC disagree on
the underlying type for some of (u)int*_fast_t types, so this change
only moves the definitions that are identical across all architectures
and does not touch those types.
This de-deduplication will allow us to have a smaller diff downstream in
CheriBSD: we only have to only change the (u)intptr_t definition in
sys/_types.h in CheriBSD instead of having to change machine/_types.h for
all CHERI-enabled architectures (currently RISC-V, AArch64 and MIPS).
Reviewed By: imp, kib
Differential Revision: https://reviews.freebsd.org/D29895
The remote protocol allows for implementations to report more specific
reasons for the break in execution back to the client [1]. This is
entirely optional, so it is only implemented for amd64, arm64, and i386
at the moment.
[1] https://sourceware.org/gdb/current/onlinedocs/gdb/Stop-Reply-Packets.html
Reviewed by: jhb
MFC after: 3 weeks
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
NetApp PR: 51
Differential Revision: https://reviews.freebsd.org/D29174
Implement wrappers around the existing debug_monitor interface, to be
consumed by MI kernel debugger code.
For now, the various db_printf() calls in this code remain. In the
future, they could be converted to printf() or removed altogether, to
properly decouple the DDB and GDB options.
Reviewed by: jhb, kib, markj
MFC after: 3 weeks
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D29155
This change serves two purposes.
First, we take advantage of the compiler provided endian definitions to
eliminate some long-standing duplication between the different versions
of this header. __BYTE_ORDER__ has been defined since GCC 4.6, so there
is no need to rely on platform defaults or e.g. __MIPSEB__ to determine
endianness. A new common sub-header is added, but there should be no
changes to the visibility of these definitions.
Second, this eliminates the hand-rolled __bswapNN() routines, again in
favor of the compiler builtins. This was done already for x86 in
e6ff6154d2. The benefit here is that we no longer have to maintain our
own implementations on each arch, and can instead rely on the compiler
to emit appropriate instructions or libcalls, as available. This should
result in equivalent or better code generation. Notably 32-bit arm will
start using the `rev` instruction for these routines, which is available
on armv6+.
PR: 236920
Reviewed by: arichardson, imp
Tested by: bdragon (BE powerpc)
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D29012
e4b8deb222 removed the last in-tree uses of PCPU_INC(). Its
potential benefit is also practically nonexistent. Non-x86
platforms already implement it as PCPU_ADD(..., 1), and according
to [0] there are no recent x86 processors for which the 'inc'
instruction provides a performance benefit over the equivalent
memory-operand form of the 'add' instruction. The only remaining
benefit of 'inc' is smaller instruction size, which in this case
is inconsequential given the limited number of per-CPU data consumers.
[0]: https://www.agner.org/optimize/instruction_tables.pdf
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D29308
This imposes a fairly severe limitation on space available for mmap that
was not noticed prior to commit. Unfixed mmap will only map from
[data + MAXSIZE, end of user VA space], bringing the amount of usable space
down way too low for non-trivial link jobs (for instance).
Reported by: mmel
The fix in bd03acedb8 worked for 32-bit
ops, and for 64-bit ops for bit arguments of 0 - 95, but then was broken
for operations on the high 32 bits after that.
Reviewed by: markj, mmel
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D27897
An 8MB max stack size is quite limiting in today's world, and in-fact is
the *default* stack size for almost every other arch (including mips).
Raise the default to 4MB (should be pretty reasonable) and the max to 64MB.
NetBSD made a similar move back in 2015 and raised MAXDSIZ to 1856 at the
same time, so let's just roll that in as well. They later lowered it, but
eventually raised it back to 1856 in order to build rust.
This was noticed while looking at qemu-bsd-user's default stack sizes and
growth behavior (or lack thereof).
Reviewed by: ian
Differential Revision: https://reviews.freebsd.org/D27218
This can be handy if gdb's stack unwinder fails, for example because of
a bug in kgdb's trap frame unwinder.
PR: 251463
Submitted by: Dmitry Salychev <dsl@mcusim.org>
MFC after: 1 week
MPIDR represents physical locality of given core and it should be used as
the only viable/robust connection between cpuid (which have zero relation to
cores topology) and external description (for example in FDT). It can be
used for determining which interrupt is associated to given per-CPU PMU
or by scheduler for determining big/little core or cluster topology.
MFC after: 3 weeks
Modern ARM systems do not have an FPA unit but GDB reserves register
indices for FPA registers and expects the stub to know their sizes.
PR: 251022
Submitted by: Dmitry Salychev <dsl@mcusim.org>
MFC after: 2 weeks
The arm configs that required it have been removed from the tree.
Removing this option makes the callout code easier to read and
discourages developers from adding new configs without eventtimer
drivers.
Reviewed by: ian, imp, mav
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27270
in sync with (most) other architectures. No functional changes.
Reviewed by: manu
Tested by: mmel
MFC after: 2 weeks
Sponsored by: EPSRC
Differential Revision: https://reviews.freebsd.org/D26604
On Ampere Altra systems, the sparse population of RAM within the
physical address space causes the vm_page_dump bitmap to be much
larger than necessary, increasing the size from ~8 Mib to > 2 Gib
(and overflowing `int` for the size).
Changing the page dump bitmap also changes the minidump file
format, so changes are also necessary in libkvm.
Reviewed by: jhb
Approved by: scottl (implicit)
MFC after: 1 week
Sponsored by: Ampere Computing, Inc.
Differential Revision: https://reviews.freebsd.org/D26131
These definitions were repeated by all architectures, with small
variations. Consolidate the common definitons in machine
independent code and use bitset(9) macros for manipulation. Many
opportunities for deduplication remain in the machine dependent
minidump logic. The only intended functional change is increasing
the bit index type to vm_pindex_t, allowing the indexing of pages
with address of 8 TiB and greater.
Reviewed by: kib, markj
Approved by: scottl (implicit)
MFC after: 1 week
Sponsored by: Ampere Computing, Inc.
Differential Revision: https://reviews.freebsd.org/D26129
One problem with the bus_space_read_N() and bus_space_write_N() family of
functions is that they provide no protection against exceptions which can
occur when no physical hardware or device responds to the read or write
cycles. In such a situation, the system typically would panic due to a
kernel-mode bus error. The bus_space_peek_N() and bus_space_poke_N() family
of functions provide a mechanism to handle these exceptions gracefully
without the risk of crashing the system.
Typical example is access to PCI(e) configuration space in bus enumeration
function on badly implemented PCI(e) root complexes (RK3399 or Neoverse
N1 N1SDP and/or access to PCI(e) register when device is in deep sleep state.
This commit adds a real implementation for arm64 only. The remaining
architectures have bus_space_peek()/bus_space_poke() emulated by using
bus_space_read()/bus_space_write() (without exception handling).
MFC after: 1 month
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D25371
This allows privileged userspace processes to find information about the
physical page backing a given mapping. It is useful in applications
such as DPDK which perform some of their own memory management.
Reviewed by: kib, jhb (previous version)
MFC after: 2 weeks
Sponsored by: Juniper Networks, Inc.
Sponsored by: Klara Inc.
Differential Revision: https://reviews.freebsd.org/D26237
Big endian and armv4 mean that we are now down to only two supported
variants. A future change will use MACHINE_ARCH in assembly which
does not support C-style string concatentation and thus needs
MACHINE_ARCH defined as a single string.
Reviewed by: imp
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D25211
The trampoline code used for loading gzipped a.out kernels on arm was
removed in r350436. A portion of this code allowed for DDB to find the
symbol tables when booting without loader(8), and some of this was
untouched in the removal. Remove it now.
Differential Revision: https://reviews.freebsd.org/D24950
The arm_physmem interface found in arm's MD code provides a convenient
set of routines for adding/excluding physical memory regions and
initializing important kernel globals such as Maxmem, realmem,
phys_avail[], and dump_avail[]. It is especially convenient for FDT
systems, since we can use FDT parsing functions and pass the result
directly to one of these physmem routines. This interface is already in
use on arm and arm64, and can be used to simplify this early
initialization on RISC-V as well.
This requires only a couple trivial changes:
- Move arm_physmem_kernel_addr to arm/machdep.c. It is unused on arm64,
and manipulated entirely in arm MD code.
- Convert arm32_btop/arm64_btop to atop. This is equivalently defined
on all architectures.
- Drop the "arm" prefix.
Reviewed by: manu, emaste ("looks reasonable")
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24153
