After committing, I noticed elf2aout commit missed the relnotes
yes. It's unlikely to be interesting, since it's just part of sparc64
removal and quite niche, but it was installed on all FreeBSD machines.
Remove the long obsolete elf2aout utility. Should any ports need to
know when this left the tree, use 1300077 as the revision so we
avoid multiple bumps for the sparc64 removal.
Reviewed by: brooks@, emaste@
Differential Revision: https://reviews.freebsd.org/D23527
Only sparc64 used this, so we will be removing it from FreeBSD 13. Add
the usual deprecation notice in a MFC-able way.
Reviewed by: emaste, rgrimes
Differential Revision: https://reviews.freebsd.org/D23526
It was only built on sparc64. Since it wasn't a general tool on other
architectures, no need to keep it around for another release.
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D23524
I was overly agressive about removing the entire comment. It was still
valid, except the part about being only for some architectures.
Reviewed by: emaste
Differenial Revision: https://reviews.freebsd.org/D23523
The set_empty_value test has a cleanup function, but is not called.
Fix it
Reviewed by: 0mp
Approved by: kp
Differential Revision: https://reviews.freebsd.org/D23498
Use of binutils is being incrementally reduced. The specific binutils
are listed in the WITH_BINUTILS and WITHOUT_BINUTILS descriptions; there
is no need to list the specific tools again in the descriptions for the
_BOOTSTRAP options.
MFC after: 1 week
Currently the Xen console is always attached with priority CN_REMOTE
(highest), which means that when booting with a single console the Xen
console will take preference over the VGA for example, and that's not
intended unless the user has also selected to use a serial console.
Fix this by lowering the priority of the Xen console to NORMAL unless
the user has selected to use a serial console. This keeps the usual
FreeBSD behavior of outputting to the internal consoles (ie: VGA) when
booted as a Xen dom0.
MFC after: 3 days
Sponsored by: Citrix Systems R&D
This change adds a new libkvm function, kvm_kerndisp(), that can be used to
retrieve the kernel displacement, that is the difference between the kernel's
base virtual address at run time and the kernel base virtual address specified
in the kernel image file.
This will be used by kgdb, to properly relocate kernel symbols, when needed.
Reviewed by: jhb
Differential Revision: https://reviews.freebsd.org/D23285
Add CTLFLAG_NEEDGIANT flag (modelled after D_NEEDGIANT) that will be used to
mark sysctls that still require locking Giant.
Rewrite sysctl_handle_string() to use internal locking instead of locking
Giant.
Mark SYSCTL_STRING, SYSCTL_OPAQUE and their variants as MPSAFE.
Add infrastructure support for enforcing proper use of CTLFLAG_NEEDGIANT
and CTLFLAG_MPSAFE flags with SYSCTL_PROC and SYSCTL_NODE, not enabled yet.
Reviewed by: kib (mentor)
Approved by: kib (mentor)
Differential Revision: https://reviews.freebsd.org/D23378
It's faster and more reliable to wait_for_pids than to sleep 1.
cem@ suggested just to remove auditd_stop() and use the rc.subr default
stop action (SIGTERM instead of audit -t), which has a built-in
wait_for_pids. That may be a better solution.
Discussed with: cem
Reviewed by: asomers
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D23223
UMA_ZFLAG_CACHEONLY was essentially the same thing as UMA_ZONE_VM, but
with a more confusing name. Remove the flag, make UMA_ZONE_VM an
inherit flag, and replace all references.
Reviewed by: markj
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D23516
We somewhat blindly copy the srr1 from the new context to the trap frame,
but disable FPU and VSX unconditionally, relying on the trap to re-enable
them. This works because the FPU manages the VSX extended FP registers,
which is governed by the PCB_FPFREGS flag. However, with altivec, we
would blindly disable PSL_VEC, without touching PCB_VEC. Handle this case
by disabling altivec in both srr1 and pcb_flags, if the mcontext doesn't
have _MC_AV_VALID set.
Reported by: pkubaj
This means that extra virtual interfaces (VIs) created with
hw.cxgbe.num_vis are no longer required to use netmap. Use this
tunable to enable native netmap support on the main interface:
hw.cxgbe.native_netmap="3"
There is no change in default behavior.
Suggested by: jch@
MFC after: 2 weeks
Sponsored by: Chelsio Communications
In legacy VirtIO drivers, the header must be PCI endianness (little) and the
device-specific region is encoded in the native endian of the guest.
This patch makes the access (read/write) to VirtIO header using the little
endian order. Other read and write access are native endianness. This also
sets the device's IO region as big endian if on big endian machine.
PR: 205178
Submitted by: Andre Silva <afscoelho@gmail.com>
Reported by: Kenneth Salerno <kennethsalerno@yahoo.com>
Reviewed by: bryanv, bdragon, luporl, alfredo
Approved by: jhibbits (mentor)
Differential Revision: https://reviews.freebsd.org/D23401
While cause codes higher than 16 are reserved, the exception code
field of the register is defined to be all bits but the upper-most
bit.
Reviewed by: mhorne
MFC after: 1 week
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D23510
While here, remove a local variable to avoid the CSR read in non-debug
kernels.
Reviewed by: mhorne
MFC after: 1 week
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D23511
In practice this discarded all characters entered at the DDB prompt.
Reviewed by: br
MFC after: 1 week
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D23509
libssp_nonshared.a defines one symbol, __stack_chk_fail_local. This
is used only on i386 and powerpc; other archs emit calls directly to
__stack_chk_fail. Simplify linking on other archs by omitting it.
PR: 242941 [exp-run]
This fixes continuing from debug.kdb.enter=1 after enabling the use of
compressed instructions since the compiler can emit the two byte
c.ebreak instead of the 4 byte ebreak.
Reviewed by: br
MFC after: 1 week
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D23507
PPC64 ELFv2 acts like a "normal" platform in that it no longer needs
function descriptors. So, ensure we are only enabling them on ELFv1.
Additionally, ELFv2 requires that the ELF header have a nonzero e_flags,
so ensure that the synthesized ELF header in dt_link.c is setting it.
Reviewed by: jhibbits, markj
Approved by: gnn
Differential Revision: https://reviews.freebsd.org/D22403
I believe this is left over from when dtrace was being ported and
developed out-of-tree. Now it just ensures that dtrace.ko and a non-SMP
kernel have incompatible KBIs.
PR: 243711
Sponsored by: The FreeBSD Foundation
This reverts r177661. The change is no longer very useful since
out-of-tree KLDs will be built to target SMP kernels anyway. Moveover
it breaks the KBI in !SMP builds since cpuset_t's layout depends on the
value of MAXCPU, and several kernel interfaces, notably
smp_rendezvous_cpus(), take a cpuset_t as a parameter.
PR: 243711
Reviewed by: jhb, kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D23512
In FreeBSD's O_SEARCH implementation, O_SEARCH in conjunction with O_RDWR or
O_WRONLY is explicitly rejected. In this case, O_RDWR was not necessary
anyways as the file will get created with or without it.
This was submitted upstream as misc/54940 and committed in rev 1.8 of the
file.
Submitted by: Bora Özarslan <borako.ozarslan@gmail.com>
Submitted by: Yang Wang <2333@outlook.jp>
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19917
This appears to have been introduced in r173763. Also fix the confusing
indentation that probably led to the bug in the first place.
PR: 243759
Diagnosed by: martin@lispworks.com
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
sendfile(2) optionally takes a set of headers that get prepended to the
file data. If the request length is less than that of the headers,
sendfile may not allocate an sfio structure, in which case its pointer
is null and we should be careful not to dereference. This was
introduced in r356902.
Reported by: syzkaller
Sponsored by: The FreeBSD Foundation
file could reasonably be NULL here if we we're using stdin. Albeit less
likely in normal usage, one could actually hit either of these warnings on
stdin.
ubmitted by: sigsys@gmail.com
MFC after: 3 days
This change adds 2 new SYSCTLs, to retrieve the original and relocated KERNBASE
values. This provides an easy, architecture independent way to calculate the
running kernel displacement (current/load address minus original base address).
The initial goal for this change is to add a new libkvm function that returns
the kernel displacement, both for live kernels and crashdumps. This would in
turn be used by kgdb to find out how to relocate kernel symbols (if needed).
Reviewed by: jhb
Differential Revision: https://reviews.freebsd.org/D23284
vdev_read_pad2() does read VDEV_PAD_SIZE of data, and will copy size bytes
of it, hence, we need buffer of VDEV_PAD_SIZE bytes.
Issue introduced in r357497.
Reported by: se
Prior to processing environment variable set in the crontab file as those
should be of higher precedent, pull in the user or login class environment.
This is another supporting feature for allowing one to configure system-wide
settings that may affect both regular cron jobs as well as services.
This is the final part of D21481.
Submitted by: Andrew Gierth <andrew_tao173.riddles.org.uk>
As mentioned in r357562, this gives the user a single place to configure
environment variables that need to be used for various services -- the
"daemon" class -- for, e.g., configuring a system-wide HTTP proxy.
This is a part of D21481.
Submitted by: Andrew Gierth <andrew_tao173.riddles.org.uk>