The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.
Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix
Most of these arguments were unused. Device models which do need
access to the vmctx in one of these methods can obtain it from the
pi_vmctx member of the pci_devinst argument instead.
Reviewed by: corvink, markj
Differential Revision: https://reviews.freebsd.org/D38096
Replace the existing ad-hoc configuration via various global variables
with a small database of key-value pairs. The database supports
heirarchical keys using a MIB-like syntax to name the path to a given
key. Values are always stored as strings. The API used to manage
configuation values does include wrappers to handling boolean values.
Other values use non-string types require parsing by consumers.
The configuration values are stored in a tree using nvlists. Leaf
nodes hold string values. Configuration values are permitted to
reference other configuration values using '%(name)'. This permits
constructing template configurations.
All existing command line arguments now set configuration values. For
devices, the "-s" option parses its option argument to generate a list
of key-value pairs for the given device.
A new '-o' command line option permits setting an individual
configuration variable. The key name is always given as a full path
of dot-separated components.
A new '-k' command line option parses a simple configuration file.
This configuration file holds a flat list of 'key=value' lines where
the 'key' is the full path of a configuration variable. Lines
starting with a '#' are comments.
In general, bhyve starts by parsing command line options in sequence
and applying those settings to configuration values. Once this is
complete, bhyve then begins initializing its state based on the
configuration values. This means that subsequent configuration
options or files may override or supplement previously given settings.
A special 'config.dump' configuration value can be set to true to help
debug configuration issues. When this value is set, bhyve will print
out the configuration variables as a flat list of 'key=value' lines.
Most command line argments map to a single configuration variable,
e.g. '-w' sets the 'x86.strictmsr' value to false. A few command
line arguments have less obvious effects:
- Multiple '-p' options append their values (as a comma-seperated
list) to "vcpu.N.cpuset" values (where N is a decimal vcpu number).
- For '-s' options, a pci.<bus>.<slot>.<function> node is created.
The first argument to '-s' (the device type) is used as the value of
a "device" variable. Additional comma-separated arguments are then
parsed into 'key=value' pairs and used to set additional variables
under the device node. A PCI device emulation driver can provide
its own hook to override the parsing of the additonal '-s' arguments
after the device type.
After the configuration phase as completed, the init_pci hook
then walks the "pci.<bus>.<slot>.<func>" nodes. It uses the
"device" value to find the device model to use. The device
model's init routine is passed a reference to its nvlist node
in the configuration tree which it can query for specific
variables.
The result is that a lot of the string parsing is removed from
the device models and centralized. In addition, adding a new
variable just requires teaching the model to look for the new
variable.
- For '-l' options, a similar model is used where the string is
parsed into values that are later read during initialization.
One key note here is that the serial ports use the commonly
used lowercase names from existing documentation and examples
(e.g. "lpc.com1") instead of the uppercase names previously
used internally in bhyve.
Reviewed by: grehan
MFC after: 3 months
Differential Revision: https://reviews.freebsd.org/D26035
Add printf() wrapper to use CR/CRLF terminators depending on whether
stdio is mapped to a tty open in raw mode.
Try to use the wrapper everywhere.
For now we leave the custom DPRINTF/WPRINTF defined by device
models, but we may remove them in the future.
Reviewed by: grehan, jhb
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D22657
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
No functional change intended.
the virtio backends.
- Add a new ioctl to export the count of pins on the I/O APIC from vmm
to the hypervisor.
- Use pins on the I/O APIC >= 16 for PCI interrupts leaving 0-15 for
ISA interrupts.
- Populate the MP Table with I/O interrupt entries for any PCI INTx
interrupts.
- Create a _PRT table under the PCI root bridge in ACPI to route any
PCI INTx interrupts appropriately.
- Track which INTx interrupts are in use per-slot so that functions
that share a slot attempt to distribute their INTx interrupts across
the four available pins.
- Implicitly mask INTx interrupts if either MSI or MSI-X is enabled
and when the INTx DIS bit is set in a function's PCI command register.
Either assert or deassert the associated I/O APIC pin when the
state of one of those conditions changes.
- Add INTx support to the virtio backends.
- Always advertise the MSI capability in the virtio backends.
Submitted by: neel (7)
Reviewed by: neel
MFC after: 2 weeks
to a virtual machine then we implicitly create COM1 and COM2 ISA devices.
Prior to this change the only way of attaching a COM port to the virtual
machine was by presenting it as a PCI device that is mapped at the legacy
I/O address 0x3F8 or 0x2F8.
There were some issues with the original approach:
- It did not work at all with UEFI because UEFI will reprogram the PCI device
BARs and remap the COM1/COM2 ports at non-legacy addresses.
- OpenBSD GENERIC kernel does not create a /dev/console because it expects
the uart device at the legacy 0x3F8/0x2F8 address to be an ISA device.
- It was functional with a FreeBSD guest but caused the console to appear
on /dev/ttyu2 which was not intuitive.
The uart emulation is now independent of the bus on which it resides. Thus it
is possible to have uart devices on the PCI bus in addition to the legacy
COM1/COM2 devices behind the LPC bus.
The command line option to attach ISA COM1/COM2 ports to a virtual machine is
"-s <bus>,lpc -l com1,stdio".
The command line option to create a PCI-attached uart device is:
"-s <bus>,uart[,stdio]"
The command line option to create PCI-attached COM1/COM2 device is:
"-S <bus>,uart[,stdio]". This style of creating COM ports is deprecated.
Discussed with: grehan
Reviewed by: grehan
Submitted by: Tycho Nightingale (tycho.nightingale@pluribusnetworks.com)
M share/examples/bhyve/vmrun.sh
AM usr.sbin/bhyve/legacy_irq.c
AM usr.sbin/bhyve/legacy_irq.h
M usr.sbin/bhyve/Makefile
AM usr.sbin/bhyve/uart_emul.c
M usr.sbin/bhyve/bhyverun.c
AM usr.sbin/bhyve/uart_emul.h
M usr.sbin/bhyve/pci_uart.c
M usr.sbin/bhyve/pci_emul.c
M usr.sbin/bhyve/inout.c
M usr.sbin/bhyve/pci_emul.h
M usr.sbin/bhyve/inout.h
AM usr.sbin/bhyve/pci_lpc.c
AM usr.sbin/bhyve/pci_lpc.h
fill up to the uart's rx fifo size, and leave any remaining input
for when the rx fifo is read. This allows cut'n'paste of long lines
to be done into the bhyve console without truncation.
Also, introduce a mutex since the file input will run in the mevent
thread context and may corrupt state accessed by a vCPU thread.
Reviewed by: neel
Approved by: NetApp
bhyve is intended to be a generic hypervisor, and not FreeBSD-specific.
(renaming internal routines will come later)
Reviewed by: neel
Obtained from: NetApp
- New memory region interface. An RB tree holds the regions,
with a last-found per-vCPU cache to deal with the common case
of repeated guest accesses to MMIO registers in the same page.
- Support memory-mapped BARs in PCI emulation.
mem.c/h - memory region interface
instruction_emul.c/h - remove old region interface.
Use gpa from EPT exit to avoid a tablewalk to
determine operand address. Determine operand size
and use when calling through to region handler.
fbsdrun.c - call into region interface on paging
exit. Distinguish between instruction emul error
and region not found
pci_emul.c/h - implement new BAR callback api.
Split BAR alloc routine into routines that
require/don't require the BAR phys address.
ioapic.c
pci_passthru.c
pci_virtio_block.c
pci_virtio_net.c
pci_uart.c - update to new BAR callback i/f
Reviewed by: neel
Obtained from: NetApp
be activated as part of the slot config options.
The syntax is:
-s <slotnum>,uart[,stdio]
The stdio parameter instructs the code to perform i/o using
stdin/stdout. It can only be used for one instance.
To allow legacy i/o ports/irqs to be used, a new variant of
the slot command, -S, is introduced. When used to specify a
slot, the device will use legacy resources if it supports
them; otherwise it will be treated the same as the '-s' option.
Specifying the -S option with the uart will first use the 0x3f8/irq 4
config, and the second -S will use 0x2F8/irq 3.
Interrupt delivery is awaiting the arrival of the i/o apic code,
but this works fine in uart(4)'s polled mode.
This code was written by Cynthia Lu @ MIT while an intern at NetApp,
with further work from neel@ and grehan@.
Obtained from: NetApp