Add a counter for the LBAs, Ranges and hardware commands so that we
can provide additional color to the statistics we provide to vendors.
Sponsored by: Netflix, Inc
This driver was marked as gone in 12. We're at 13 now. Remove it.
Data from nycbug's dmesg cache shows only one potential user,
suggesting it never was used much. However, even though this device
has been obsolete for 15 years at least, sys/joystick.h is included in
a number of graphics packages still, so that remains. A full exprun
is needed before that can be removed.
RelNotes: yes
Differential Revision: https://reviews.freebsd.org/D17629
At least one NVMe drive has a bug that makeing the Command Time Out
PCIe feature unreliable. The workaround is to disable this
feature. The driver wouldn't deal correctly with a timeout anyway.
Only do this for drives that are known bad.
Sponsored by: Netflix, Inc
Differential Revision: https://reviews.freebsd.org/D17708
modify l3 pte after we loaded old value and before we stored new value.
o Preset A(accessed), D(dirty) bits for kernel mappings.
Reported by: kib
Reviewed by: markj
Discussed with: jhb
Sponsored by: DARPA, AFRL
I held the mistaken belief this was completely unused. While the
driver is unused and likely not relevant for a long time,
sys/joystick.h lives on in maybe half a dozen ports, even though
hardware to use it hasn't been widely used in maybe 15 years.
interface into two groups. Filters can be used to match traffic
and distribute it across a group.
hw.cxgbe.nm_split_rss
Sponsored by: Chelsio Communications
Flags prevent open(2) and *at(2) vfs syscalls name lookup from
escaping the starting directory. Supposedly the interface is similar
to the same proposed Linux flags.
Reviewed by: jilles (code, previous version of manpages), 0mp (manpages)
Discussed with: allanjude, emaste, jonathan
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D17547
The AML is even stupider than always returning 0. It will only return
non-zero for an OS that reports itself as "Windows 2015", at least
on the Threadripper board's AML that I've examined.
Those AMLs also suggest we may need this quirk for AMI0030 as well.
There may be other cases where we need to override the _STA in a
generic way, so we should consider writing code to do that.
subset of a VI's RSS indirection table.
This makes it possible to make groups out of rx queues and steer
different kinds of traffic to different groups. For example, an
interface with 8 rx queues could have all non-TCP traffic delivered to
queues 0-3 and all TCP traffic to queues 4-7.
Note that it is already possible for filters to steer traffic to a
particular queue or to distribute it using the full indirection table
(much like normal rx does).
Sponsored by: Chelsio Communications
The current deprecated list is: ae, bm, cs, de, dme, ed, ep, ex, fe,
pcn, sf, sn, tl, tx, txp, vx, wb, xe
The list as refined as part of FCP-0101. Per the FCP, devices may be
removed from the deprecation list if enough users are found or they are
converted to iflib.
FCP: https://github.com/freebsd/fcp/blob/master/fcp-0101.md
Previously, it used a hand-rolled round-robin iterator. This meant that
the minskip logic in r338507 didn't apply to UMA allocations, and also
meant that we would call vm_wait() for individual domains rather than
permitting an allocation from any domain with sufficient free pages.
Discussed with: jeff
Tested by: pho
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D17420
After r335924 rip6_input() needs inp validation to avoid
working on FREED inps.
Apply the relevant bits from r335497,r335501 (rip_input() change)
to the IPv6 counterpart.
PR: 232194
Reviewed by: rgrimes, ae (,hps)
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D17594
We checked the destination address, but replaced the source address. This was
fixed in OpenBSD as part of their NAT rework, which we don't want to import
right now.
CID: 1009561
MFC after: 3 weeks
There's no point in the NULL check for ifp, because we'll already have
dereferenced it by then. Moreover, the event will always have a valid ifp.
Replace the late check with an early assertion.
CID: 1357338
Use bypass to catch any NFS VOP dispatch and route it through the
wrapper which does sigdeferstop() and then dispatches original
VOP. NFS does not need a bypass below it, which is not supported.
The vop offset in the vop_vector is added since otherwise it is
impossible to get vop_op_t from the internal table, and I did not
wanted to create the layered fs only to wrap NFS VOPs.
VFS_OP()s wrap is straightforward.
Requested and reviewed by: mjg (previous version)
Tested by: pho
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D17658
check hash to the superblock. If a check hash fails when an attempt
is made to mount a filesystem, the mount fails with EINVAL (Invalid
argument). This avoids a class of filesystem panics related to
corrupted superblocks. The hash is done using crc32c.
Check hases are added only to UFS2 and not to UFS1 as UFS1 is primarily
used in embedded systems with small memories and low-powered processors
which need as light-weight a filesystem as possible.
Reviewed by: kib
Tested by: Peter Holm
Sponsored by: Netflix
That commit is causing kernel panics in em(4), so this will be reverted
until those are fixed.
Reported by: ae@, pho@, et al
Sponsored by: Intel Corporation
Before this change we had two flavours of vm_domainset iterators: "page"
and "malloc". The latter was only used for kmem_*() and hard-coded its
behaviour based on kernel_object's policy. Moreover, its use contained
a race similar to that fixed by r338755 since the kernel_object's
iterator was being run without the object lock.
In some cases it is useful to be able to explicitly specify a policy
(domainset) or policy+iterator (domainset_ref) when performing memory
allocations. To that end, refactor the vm_dominset_* KPI to permit
this, and get rid of the "malloc" domainset_iter KPI in the process.
Reviewed by: jeff (previous version)
Tested by: pho (part of a larger patch)
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D17417
This change is similar to r339646. The callback that checks for appearing
and disappearing of tunnel ingress address can be called during VNET
teardown. To prevent access to already freed memory, add check to the
callback and epoch_wait() call to be sure that callback has finished its
work.
MFC after: 20 days
allowed.
ipsec_srcaddr() callback can be called during VNET teardown, since
ingress address checking subsystem isn't VNET specific. And thus
callback can make access to already freed memory. To prevent this,
use V_ipsec_idhtbl pointer as indicator of VNET readiness. And make
epoch_wait() after resetting it to NULL in vnet_ipsec_uninit() to
be sure that ipsec_srcaddr() is finished its work.
Reported by: kp
MFC after: 20 days
Changelist:
- Move large parts of VALE code to a new file and header netmap_bdg.[ch].
This is useful to reuse the code within upcoming projects.
- Improvements and bug fixes to pipes and monitors.
- Introduce nm_os_onattach(), nm_os_onenter() and nm_os_onexit() to
handle differences between FreeBSD and Linux.
- Introduce some new helper functions to handle more host rings and fake
rings (netmap_all_rings(), netmap_real_rings(), ...)
- Added new sysctl to enable/disable hw checksum in emulated netmap mode.
- nm_inject: add support for NS_MOREFRAG
Approved by: gnn (mentor)
Differential Revision: https://reviews.freebsd.org/D17364
The taskqgroup_detach function does not check if task is already enqueued when
detaching it. This may lead to kernel panic if enqueued task starts after
context state lock is destroyed. Ensure that the already enqueued admin tasks
are executed before detaching them.
The issue was discovered during validation of D16429. Unloading of if_ixlv
followed by immediate removal of VFs with iovctl -D may lead to panic on
NODEBUG kernel.
As well, check if iflib is in detach before enqueueing new admin or iov
tasks, to prevent new tasks from executing while the taskqgroup tasks
are being drained.
Submitted by: Krzysztof Galazka <krzysztof.galazka@intel.com>
Reviewed by: shurd@, erj@
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D17404
The BMan softc must exist when dtsec devices are created, else a NULL
pointer is dereferenced. QMan likely as well. Until now, we have relied on
order within the fdt parsing to attach correctly, but this obviously is not
foolproof. Mark these as BUS_PASS_SUPPORTDEV so they're probed and attached
explicitly before dtsec devices.
The bits that explicitly request cidx updates do not work reliably with
all possible WRs that can be sent over the queue. The F_FW_WR_EQUIQ
requests that still remain may also have to be replaced with explicit
credit flush WRs in the future.
MFC after: 2 days
Sponsored by: Chelsio Communications
All platforms except powerpc use the same values and powerpc shares a
majority of them.
Go ahead and declare AT_NOTELF, AT_UID, and AT_EUID in favor of the
unused AT_DCACHEBSIZE, AT_ICACHEBSIZE, and AT_UCACHEBSIZE for powerpc.
Reviewed by: jhb, imp
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D17397
Join non-special lines together until we hit a line containing a '}'
character. This allows the function declaration body to be split
across multiple lines without backslash continuation characters.
Continue to join lines ending with backslashes to allow gradual
migration and to support out-of-tree syscall vectors
Reviewed by: emaste, kib
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D17488
The restruct qualifier is intended to aid code generation in the
compiler, but the only access to storage through these pointers is via
structs using copyin/copyout and the like which can not be written in C
or C++ and thus the compiler gains nothing from the qualifiers.
As such, the qualifiers add no value in current usage.
Reviewed by: kib
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D17574
- Add a blank line before a block comment to match other block comments
in the same function.
- Sort the prototype for sbsndptr_adv and fix whitespace between return
type and function name.
Reviewed by: gallatin, bz
Differential Revision: https://reviews.freebsd.org/D17474
Currently the compiler picks up the definition in machine/cpufunc.h.
Add compiler memory barriers to read* and write*. The Linux x86
implementation of these functions uses inline asm with "memory" clobber.
The Linux x86 implementation of read_relaxed* and write_relaxed* uses the
same inline asm without "memory" clobber.
Implement ioread* and iowrite* in terms of read* and write* so they also
have memory barriers.
Qualify the addr parameter in write* as volatile.
Like Linux, define macros with the same name as the inline functions.
Only define 64-bit versions on 64-bit architectures because generally
32-bit architectures can't do atomic 64-bit loads and stores.
Regroup the functions a bit and add brief comments explaining what they do:
- __raw_read*, __raw_write*: atomic, no barriers, no byte swapping
- read_relaxed*, write_relaxed*: atomic, no barriers, little-endian
- read*, write*: atomic, with barriers, little-endian
Add a comment that says our implementation of ioread* and iowrite*
only handles MMIO and does not support port IO.
Reviewed by: hselasky
MFC after: 3 days
This provides a chicken switch for anyone negatively impacted by
enabling NUMA in the amd64 GENERIC kernel configuration. With
NUMA disabled at boot-time, information about the NUMA topology
is not exposed to the rest of the kernel, and all of physical
memory is viewed as coming from a single domain.
This method still has some performance overhead relative to disabling
NUMA support at compile time.
PR: 231460
Reviewed by: alc, gallatin, kib
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D17439
I committed some patches out of order and didn't build-test one of them.
Reported by: Jenkins, O. Hartmann <ohartmann@walstatt.org>
X-MFC with: r339601
On NUMA systems, we would not swap in processes unless all domains
had some free pages. This is too conservative in general. Instead,
permit swapins so long as at least one domain has free pages, and add
a kernel stack NUMA policy which ensures that we will try to allocate
kernel stack pages from any domain.
Reported and tested by: pho, Jan Bramkamp <crest@bultmann.eu>
Reviewed by: alc, kib
Discussed with: jeff
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D17304
vmem uses UMA cache zones to implement the quantum cache. Since
uma_zalloc() returns 0 (NULL) to signal an allocation failure, UMA
should not be used to cache resource 0. Fix this by ensuring that 0 is
never cached in UMA in the first place, and by modifying vmem_alloc()
to fall back to a search of the free lists if the cache is depleted,
rather than blocking in qc_import().
Reported by and discussed with: Brett Gutstein <bgutstein@rice.edu>
Reviewed by: alc
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D17483
This should have been a part of r338470. No functional changes
intended.
Reported by: gallatin
Reviewed by: gallatin, Johannes Lundberg <johalun0@gmail.com>
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D17109
cache, then we put new bucket on generic bucket cache. However, code didn't
honor UMA_ZONE_NOBUCKETCACHE flag, so potentially we could start a cache
on a zone that clearly forbids that. Fix this.
Reviewed by: markj
Instead, a failing entry is skipped.
This change consist of two logical changes.
A failure to vget or lookup an entry is considered to be a result of a
concurrent removal, which is the only reasonable explanation given that
the filesystem is busied. So, the entry would be silently skipped.
In the case of a failure to get attributes of an entry for an NFSv3
request, the entry would be silently skipped. There can be legitimate
reasons for the failure, but NFSv3 does not provide any means to report
the error, so we have two options: either fail the whole request or
ignore the failed entry. Traditionally, the old NFS server used the
latter option, so the code is reverted to it. Making the whole
directory unreadable because of a single entry seems to be unpractical.
Additionally, some bits of code are slightly re-arranged to account for
the new control flow and to honor style(9).
Reviewed by: rmacklem
Sponsored by: Panzura
Differential Revision: https://reviews.freebsd.org/D15424
We should only unmask interrupts when creating a new thread and leave the
other exceptions in teh same state as before creating the thread.
Reported by: jhibbits
Reviewed by: jhibbits
MFC after: 1 month
Sponsored by: https://reviews.freebsd.org/D17497
The change is based on public documents listed below as well as Linux
changes and the code developed by Kostik.
The documents:
- Intel® C620 Series Chipset Platform Controller Hub Datasheet
- Intel® 100 Series and Intel® C230 Series Chipset Family Platform
Controller Hub (PCH) Datasheet - Volume 2 of 2
Interesting Linux commits:
- 9424693035
- 2a7a0e9bf7
The peculiarity of the new chipsets is that the watchdog resources are
configured in PCI registers of SMBus controller and Power Management
function as opposed to the LPC bridge. I took a simplistic approach of
querying the resources from the respective PCI devices. ichwd is still
a device on isa bus. The PCI devices are found by their slot and
function defined in the datasheets as siblings of the upstream LPC
bridge.
There are some shortcuts and missing features.
First of all, I have not implemented the functionality required to clear
the no-reboot bit. That would require writing to a special PCI
configuration register of a hidden / invisible PCI device after which
the device would start responding to accesses to other registers. The
no-reboot bit was not set on my test hardware, so I decided to leave its
handling for the later time.
Also, I did not try to handle the case where the watchdog resources are
not configured by the hardware as well as the case where ACPI defined
operational region conflicts with the watchdog resources. My test
system did not have either of those problem, so, again, I decided to
leave those cases until later.
See this Linux commit for some details of the ACPI problem:
a7ae81952c
Finally, I have added only the PCI ID found on my test system. I think
that more IDs can be added as the change gets tested.
Tested on Dell PowerEdge R740.
PR: 222079
Reviewed by: mav, kib
MFC after: 3 weeks
Relnotes: maybe
Sponsored by: Panzura
Differential Revision: https://reviews.freebsd.org/D17585
Further investigation of issues with 32-bit DMA on PowerNV revealed that
its window is hardcoded by OPAL (at least in skiboot version 5.4.9) and
cannot be changed by the OS.
Thus, now jhb suggestion of limiting the range in PCI DMA tag seems
the best way to deal with it.
Reviewed by: jhibbits, nwhitehorn, sbruno
Approved by: jhibbits(mentor)
Differential Revision: https://reviews.freebsd.org/D17601
SX-locks, during if_purgeaddrs(), by not allowing to hold the epoch
read lock over typical network IOCTL code paths. This is a regression
issue after r334305.
Reviewed by: ae (network)
Differential revision: https://reviews.freebsd.org/D17647
MFC after: 1 week
Sponsored by: Mellanox Technologies
the current fixed values, which enables use of rates above 1 Mbps.
Improved the detection of HXD chips, and the status flag handling as
well.
Submitted by: Gabor Simon <gabor.simon75@gmail.com>
PR: 225932
Differential revision: https://reviews.freebsd.org/D16639
MFC after: 1 week
Sponsored by: Mellanox Technologies
If power exceed the slot limit, or slot limit is unknown the ConnectX-6
firmware will shutdown its port.
Inform the user via debug message.
MFC after: 3 days
Approved by: hselasky (mentor), kib (mentor)
Sponsored by: Mellanox Technologies
Instead of finding the exact size to fit in we can just shift the target
by -8 + tail. Doing a blind write to a previously rep stosq'ed area comes
with a penalty so do it conditionally.
Sample win on EPYC when zeroing a 257 sized buffer (tail = 1) aligned to
16 bytes:
before: 44782846 ops/s
after: 46118614 ops/s
Idea stolen from NetBSD.
Sponsored by: The FreeBSD Foundation
The Device Specific Method (_DSM) is on optional object that defines
device specific controls. This will be useful for our power management
controller in upcoming patches. More information can be found in ACPI
spec 6.2 section 9.1.1
https://www.uefi.org/sites/default/files/resources/ACPI_6_2.pdf
This patch had a minor modification changing ENOMEM to AE_NO_MEMORY
after it got review and approval but before committing.
Test Plan: Tested in my s0ix branch
Reviewed by: kib
Approved by: emaste (mentor)
Differential Revision: https://reviews.freebsd.org/D17121
This driver has been obsolete since the FreeBSD 4.x. It should have
been removed then since the sym(4) driver had subsumed it. The driver
was commented out of GENERIC in 2000.
RelNotes: Yes
scsi_low was a common set of routines to do the SCSI bus sequencing
for the ncv, nsp and stg drivers. Those have been removed, so it's no
longer needed since nothing else in the tree uses it and nothing
likely ever will (it's for super-low-end 8-bit parallel SCSI cards).
stg(4) is marked as gone in 12. Remove it. There are no sightings of
it in the nycbug dmesg database. It was for an obscure SCSI card that
sold mostly in Japan, and was especially popilar among pc98 hackers in
the 4.x time frame. It was also only enabled on i386.
Relnote: Yes
nsp(4) is marked as gone in 12. Remove it. There are no sightings of
it in the nycbug dmesg database. It was for an obscure SCSI card that
sold mostly in Japan, and was especially popilar among pc98 hackers in
the 4.x time frame. It was also only enabled on i386.
Relnote: Yes
ncv(4) is marked as gone in 12. Remove it. There are no sightings of
it in the nycbug dmesg database. It was for an obscure SCSI card that
sold mostly in Japan, and was especially popilar among pc98 hackers in
the 4.x time frame..
Relnote: Yes
The buslogic scsi driver has been tagged as gone in 12 for some time
now. Remove it. The nycbug dmesg database shows only one sighting in 6
for this driver. It was very popular in the early days of the project,
but that popularity seems to have died by 2004 when the nycbug
database started up.
Relnotes: yes
Remove the advanssy drivers (both adv and adw). They were tagged as
gone in 12 a while qgo. The nycbug dmesg database shows this was last
seen in 6 and there were only a few adv sightings then (none for adw).
Relnotes: yes
aic was marked to be gone in 12 a while ago. Go ahead and remove it.
nycbug's dmesg database shows this was last seen in 6 and one more
time in 4.x. It never was popular, and what popularity it had was over
before the nycbug databse got going in 2004.
Relnotes: yes
We tagged aha as gone in 12 a while ago. Proceed with its removal.
Data from nycbug's database shows the last sighting of this driver in
6, with the prior one in 4.x show its popularity had died prior to
4.x.
Relnotes: yes
Remove mse and all support for bus and inport devices from the tree.
Data from nycbug's dmesg database shows the last sighting of this
driver was in 4.10 on only one machine.
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D17628
This driver was marked as gone in 12. We're at 13 now. Remove it.
Data from nycbug's dmesg cache shows only one potential user,
suggesting it never was used much.
RelNotes: yes
Differential Revision: https://reviews.freebsd.org/D17629
We're planning on removing adv, adw, aha, aic, bt, ncv, nsp, and stg
soon. They have been tagged for removal in 12. At least get them out
of GENERIC.
MFC after: 3 days
Relnotes: yes
si_addr is the address of the instruction executing at the time the
signal was sent. Populate this field with srr0, which, though not
always the case, is most often the instruction that triggered the fault.
debugf() is unnecessary for the TLB printing functions, as they're only
intended to be used from ddb. Instead, make them full DDB 'show'
commands, so now it can be written as 'show tlb1' and 'show tlb0'
instead of calling the function, hoping DEBUG has been defined.
Currently, icmp_error() function copies FIB number from original packet
into generated ICMP response but not mbuf_tags(9) chain.
This prevents us from easily matching ICMP responses corresponding
to tagged original packets by means of packet filter such as ipfw(8).
For example, ICMP "time-exceeded in-transit" packets usually generated
in response to traceroute probes lose tags attached to original packets.
This change adds new sysctl net.inet.icmp.error_keeptags
that defaults to 0 to avoid extra overhead when this feature not needed.
Set net.inet.icmp.error_keeptags=1 to make icmp_error() copy mbuf_tags
from original packet to generated ICMP response.
PR: 215874
MFC after: 1 month
* use CK_LIST and FNV hash to keep chains of softc;
* read access to softc is protected by epoch();
* write access is protected by ipsec_ioctl_sx. Changing of softc fields
is allowed only when softc is unlinked from CK_LIST chains.
* linking/unlinking of softc is allowed only when ipsec_ioctl_sx is
exclusive locked.
* the plain LIST of all softc is replaced by hash table that uses ingress
address of tunnels as a key.
* added support for appearing/disappearing of ingress address handling.
Now it is allowed configure non-local ingress IP address, and thus the
problem with if_ipsec(4) configuration that happens on boot, when
ingress address is not yet configured, is solved.
MFC after: 1 month
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D17190
* register handler for ingress address appearing/disappearing;
* add new srcaddr hash table for fast softc lookup by srcaddr;
* when srcaddr disappears, clear IFF_DRV_RUNNING flag from interface,
and set it otherwise;
MFC after: 1 month
Sponsored by: Yandex LLC
* register handler for ingress address appearing/disappearing;
* add new srcaddr hash table for fast softc lookup by srcaddr;
* when srcaddr disappears, clear IFF_DRV_RUNNING flag from interface,
and set it otherwise;
MFC after: 1 month
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D17214
* register handler for ingress address appearing/disappearing;
* add new srcaddr hash table for fast softc lookup by srcaddr;
* when srcaddr disappears, clear IFF_DRV_RUNNING flag from interface,
and set it otherwise;
* remove the note about ingress address from BUGS section.
MFC after: 1 month
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D17134
appearing and disappearing on the host system.
Such handling is need, because tunneling interfaces must use addresses,
that are configured on the host as ingress addresses for tunnels.
Otherwise the system can send spoofed packets with source address, that
belongs to foreign host.
The KPI uses ifaddr_event_ext event to implement addresses tracking.
Tunneling interfaces register event handlers and then they are
notified by the kernel, when an address disappears or appears.
ifaddr_event_compat() handler from if.c replaced by srcaddr_change_event()
in the ip_encap.c
MFC after: 1 month
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D17134
vlan_lladdr_fn() is called from taskqueue, which means there's no vnet context
set. We can end up trying to send ARP messages (through the iflladdr_event
event), which requires a vnet context.
PR: 227654
MFC after: 3 days
This allows use differen values configured by user for sysctl variable
net.inet.ip.fw.dyn_rst_lifetime.
Obtained from: Yandex LLC
MFC after: 3 weeks
Sponsored by: Yandex LLC
to switch the output method in run-time. Also document some sysctl
variables that can by changed for NAT64 module.
NAT64 had compile time option IPFIREWALL_NAT64_DIRECT_OUTPUT to use
if_output directly from nat64 module. By default is used netisr based
output method. Now both methods can be used, but they require different
handling by rules.
Obtained from: Yandex LLC
MFC after: 3 weeks
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D16647
This allows the memory mapped I/O virtio driver to attach when we boot
with ACPI tables, for example in some cases with QEMU emulating arm64.
MFC after: 1 month
that was added using "new rule format". And then, when the kernel
returns rule with this flag, ipfw(8) can correctly show it.
Reported by: lev
MFC after: 3 weeks
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D17373
supported all the "old" chips it did, so we should have killed it in
4, but 12 will do. It's a bit outside of the normal deprecation
process, but given the extreme age, it's obsolete status for 8 major
releases and the fact that I couldn't find any users who posted dmesgs
with ncr0: in them after 2000 or 3.4. It may be too late for 12 (this
change will be merged, but maybe not the next one to remove it), but
it will be removed in 13 with the first round of other drivers tagged
to be gone in 12.
MFC after: 3 days
handler receives the type of event IFADDR_EVENT_ADD/IFADDR_EVENT_DEL,
and the pointer to ifaddr. Also ifaddr_event now is implemented using
ifaddr_event_ext handler.
MFC after: 3 weeks
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D17100
SADB_ACQUIRE requests are send by kernel, when security policy doesn't
have corresponding security association for outbound packet. IKE daemon
usually registers its handler for such messages and when the kernel asks
for SA it can handle this request. Now such requests will contain
additional fields that can help IKE daemon to create SA. And IKE now
can create SAs using only information from SADB_ACQUIRE request, this
is useful when many if_ipsec(4) interfaces are in use and IKE doesn track
security policies that was installed by kernel.
Obtained from: Yandex LLC
MFC after: 3 weeks
Sponsored by: Yandex LLC
This driver was already 99% identical to the ofw_pcib_pci driver, except for
the attachment. Since ofw_pcib_pci is already a subclass of pcib, this
creates a private declaration of that class, to use for the base class for
this driver.
At some point in the future, ofw_pcib_pci_driver should probably be exported
to a header, so we're not tracking the softc struct contents, but for now,
since there's only this one other driver, it's not a pressing issue.
r279252 inverted the logic in moea64_scan_init, such that instead of
terminating when reaching a dead page, it terminates when reaching a live
page, ostensibly preserving exactly one page of KVA.
In the FDT based probe, check for "arm,armv8-timer" before "arm,armv7-timer".
This gets the description right when the timer node has both entries in
compatible list.
There seems to be a race in CI, such that dtrace_asm.S might be assembled
before the genassym is completed. This causes a build failure when PSL_EE
doesn't exist, and is read as 0. Get around this by explicitly specifying
the bits in the mask instead.
The Signal Processing Engine (SPE) found in Freescale e500 cores (and
others) offloads IEEE-754 compliance (NaN, Inf handling, overflow,
underflow) to software, most likely as a means of simplifying the APU
silicon. Some software, like AbiWord, needs full IEEE-754 compliance,
including NaN handling. Implement the necessary bits to enable it.
Differential Revision: https://reviews.freebsd.org/D17446
The knob allows to select the flushing mode or turn it off/on. The
idea, as well as the list of the ignored syscall errors, were taken
from https://www.openwall.com/lists/kernel-hardening/2018/10/11/10 .
I was not able to measure statistically significant difference between
flush enabled vs disabled using syscall_timing getuid.
Reviewed by: bwidawsk
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D17536
libc/gmon's mcount was ANSIfied in r124180, with libkern following over
a decade later, in r325988, but some minor discrepancies remained.
Update libc/gmon's mexitcount to an ANSI C function definition, and use
(void) for libkern-only functions that take no arguments.
Reported by: bde
Prior to this revision, we allocated sufficient context space for 'level'
but never actually set the compress level parameter, so we would always get
the default '3'.
Reviewed by: markj, vangyzen
MFC after: 12 hours
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D17144
If multiple threads enter fortuna_pre_read contemporaneously, such as via
read(2) or getrandom(2), they could race to check how long it has been since
the last update due to a TOCTOU problem with 'now'.
Here is an example problematic execution:
Thread A: Thread B:
now_A = getsbinuptime();
now_B = getsbinuptime(); // now_B > now_A
RANDOM_RESEED_LOCK();
if (now - fs_lasttime > SBT_1S/10) {
fs_lasttime = now;
... // reseed
}
RANDOM_RESEED_UNLOCK();
RANDOM_RESEED_LOCK();
if (now_A - fs_lasttime > SBT_1S/10) // now_A - fs_lasttime underflows
fs_lasttime = now_A;
... // reseed again, despite less than 100ms elapsing
}
RANDOM_RESEED_UNLOCK();
To resolve the race, simply check the current time after we win the lock
race.
If getsbinuptime is perceived to be expensive, another option might be to
just accept the race and validate that fs_lasttime isn't "in the future."
(It should be within the last ~2^31 seconds out of ~2^32 seconds
representable duration.)
Reviewed by: delphij, markm
Approved by: secteam (delphij)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D16984
The convention for updating hc_destination[] is to index with a
random_entropy_source. Zero happens to match RANDOM_CACHED, which is
correct for this source (early random data). Spell the zero value as the
enum name instead of the magic constant.
No functional change.
Reviewed by: delphij, markm
Approved by: secteam (delphij)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D16983
When modifying an existing managed mapping, we should find a PV entry
for the old mapping. Verify this.
Before r335784 this would have been implicitly tested by the fact that
we always freed the PV entry for the old mapping.
Reviewed by: alc, kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D17626
In various places, random represents the set of sources as a 32-bit word
bitmask. It assumes all sources fit within this, i.e., the maximum valid
source number is 31.
There was a comment specifying this limitation, but we can actually refuse
to compile if our assumption is violated instead. We still have a few spare
random source slots, but sooner or later someone may need to convert the
masks used from raw 32-bit words to bitset(9) APIs.
This prevents some kinds of developer foot-shooting when adding new random
sources. No functional change.
Reviewed by: delphij, markm
Approved by: secteam (delphij)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D16982
Currently, the 'thread' command (to switch the debugger to another thread)
only accepts decimal-encoded tids. Use the same parsing logic as 'show
thread <arg>' to accept hex-encoded thread pointers in addition to
decimal-encoded tids.
Document the 'thread' command in ddb.4 and expand the 'show thread'
documentation to cover the tid usage.
Reported by: bwidawsk
Reviewed by: bwidawsk (earlier version), kib (earlier version), markj
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D16962
Remove unnecessary use of function-local static variable. 32 bytes is
small enough to live on the stack.
Reviewed by: delphij, markm
Approved by: secteam (delphij)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D16937
FS&K GenerateBlocks function asserts C (counter) != 0. This should also
be true in our implementation.
Reviewed by: delphij, markm
Approved by: secteam (delphij)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D16936
When reseeding, only incorporate actual key material. Do not include e.g.
the derived key schedules or other AES context.
I don't think the extra material was harmful here, just not beneficial.
Reviewed by: delphij, markm
Approved by: secteam (delphij)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D16934
Like the companion API devvn_refthread, leave *ref uninitialized when a
reference was not acquired. Initializing to 1 provides a vaguely
correct-looking but bogus value for broken callers to (mistakenly) pass to
dev_relthread() when refthread fails.
Make it even more clear to consumers that dev_relthread is only valid when
dev_refthread succeeds.
Reviewed by: kib, markj
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D16885
We no longer build the drm/drm2 modules by default. See UPDATING for
which package to install instead. drm and drm2 have been completely
unsupported abandonware for a long time now. Please report issues with
the pkg modules to x11@freebsd.org.
Approved by: FreeBSD Graphics Team
Update messaging for which drm module to install. Add guidance on what
hardware is supported (which should be copied into the release
notes). Note: the in tree drivers are abandonware. There has been no
organized support for them for many years, and the plan is to still
remove them for all but arm once the transition to drm-*kmod is
complete. Also note that WITHOUT_MODULE_DRM and WITHOUT_MODULE_DRM2
should generally be added to src.conf for anybody using the drm-*kmod
ports. That will become default in 13 soon, however.
Approved by: FreeBSD Graphics Team
Relnotes: Yes
MFC After: 3 days
Differential Revision: https://reviews.freebsd.org/D17451
