illumos/illumos-gate@dec267e7ea
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Matthew Ahrens <mahrens@delphix.com>
9424 ztest failure: "unprotected error in call to Lua API (Invalid value type 'f
unction' for key 'error')"
illumos/illumos-gate@fe3ba4d122
Reviewed by: Sebastien Roy <sebastien.roy@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Don Brady <don.brady@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Matthew Ahrens <mahrens@delphix.com>
In the most fragmented real-world cases, this reduces memory used by the
mapping from ~1GB to ~50MB of RAM per 1TB of storage removed. Less
fragmented cases will typically also see around 50-100MB of RAM per 1TB
of storage.
illumos/illumos-gate@cfd63e1b1b
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Tim Chase <tim@chase2k.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Matthew Ahrens <mahrens@delphix.com>
Datasets that are deeply nested (~100 levels) are impractical. We just put
a limit of 50 levels to newly created datasets. Existing datasets should
work without a problem.
illumos/illumos-gate@5ac95da7d6
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Matt Ahrens <matt@delphix.com>
Approved by: Garrett D'Amore <garrett@damore.org>
Author: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com>
Continues what was started in 7801 add more by-dnode routines by fully
converting zvols to avoid unnecessary dnode_hold() calls. This saves a
small amount of CPU time and slightly improves latencies of operations
on zvols.
illumos/illumos-gate@8dfe5547fb
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Rick McNeal <rick.mcneal@nexenta.com>
Approved by: Dan McDonald <danmcd@joyent.com>
Author: Richard Yao <richard.yao@prophetstor.com>
All objects after the last written or freed object are not supposed to
exist after receiving the stream. We should free them accordingly, as if
a freeobjects record for them had been included in the stream.
zfsonlinux/zfs@48fbb9ddbfillumos/illumos-gate@7864b8192b
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Dan McDonald <danmcd@joyent.com>
Author: Paul Dagnelie <pcd@delphix.com>
9464 txg_kick() fails to see that we are quiescing, forcing transactions
to their next stages without leaving them accumulate changes
Ideally we would like txg_kick() to get triggered only when we are sure
that we are not syncing AND not quiescing any txg. This way we can kick
an open TXG to the quiescing state when we are sure that there is nothing
going on and we would benefit from the different states running
concurrently.
illumos/illumos-gate@fa41d87de9
Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed by: Brad Lewis <brad.lewis@delphix.com>
Reviewed by: Andriy Gapon <avg@FreeBSD.org>
Approved by: Dan McDonald <danmcd@joyent.com>
Author: Serapheim Dimitropoulos <serapheim@delphix.com>
Updates to indirect blocks of spacemaps can contribute significantly to
write inflation. Therefore we want to reduce the indirect block size of
spacemaps from 128K to 16K.
illumos/illumos-gate@221813c13b
Reviewed by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Albert Lee <trisk@forkgnu.org>
Reviewed by: Igor Kozhukhov <igor@dilos.org>
Approved by: Dan McDonald <danmcd@joyent.com>
Author: Matthew Ahrens <mahrens@delphix.com>
9426 metaslab size can exceed offset addressable by spacemap
metaslab size can exceed offset addressable by spacemap. The vdev can
address up to 2^63 * SPA_MAXBLOCKSIZE (512). A metaslab can address up to
2^47 * 2^vdev_ashift. Therefore we may need to increase the number of
metaslabs so that the maximum metaslab size is capped at the amount that
can be addressed by the spacemap. This should happen in
vdev_metaslab_set_size().
illumos/illumos-gate@b4bf0cf045
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Matt Ahrens <matt@delphix.com>
Approved by: Dan McDonald <danmcd@joyent.com>
Author: Don Brady <don.brady@delphix.com>
9328 zap code can take advantage of c99
9329 panic in zap_leaf_lookup() due to concurrent zapification
illumos/illumos-gate@bf26014c55
Reviewed by: Steve Gonczi <steve.gonczi@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Brad Lewis <brad.lewis@delphix.com>
Approved by: Dan McDonald <danmcd@joyent.com>
Author: Matthew Ahrens <mahrens@delphix.com>
9403 assertion failed in arc_buf_destroy() when concurrently reading block with checksum error
This assertion (VERIFY) failure was reported when reading a block. Turns out
the problem is that if we get an i/o error (ECKSUM in this case), and there
are multiple concurrent ARC reads of the same block (from different clones),
then the ARC will put multiple buf's on the same ANON hdr, which isn't
supposed to happen, and then causes a panic when we try to arc_buf_destroy()
the buf.
illumos/illumos-gate@fa98e487a9
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Approved by: Matt Ahrens <mahrens@delphix.com>
Author: Matthew Ahrens <mahrens@delphix.com>
9421 zdb should detect and print out the number of "leaked" objects
9422 zfs diff and zdb should explicitly mark objects that are on the deleted queue
illumos/illumos-gate@20b5dafb42
Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Approved by: Matt Ahrens <mahrens@delphix.com>
Author: Paul Dagnelie <pcd@delphix.com>
9102 zfs should be able to initialize storage devices
The first access to a disk block can incur a performance penalty on some
platforms (e.g. AWS's EBS, VMware VMDKs). Therefore it is recommended that
volumes be "thick provisioned", where supported by the platform (VMware).
Thick provisioning is time consuming and often is ignored. If the thick
provision step is omitted, customers will see suboptimal performance until
we have written to all parts of the LUN. ZFS should be able to initialize
any unused storage to remove any first-write penalty that exists.
illumos/illumos-gate@094e47e980
Reviewed by: John Wren Kennedy <john.kennedy@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: George Wilson <george.wilson@delphix.com>
illumos/illummos-gate@df477c0afa
Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Paul Dagnelie <pcd@delphix.com>
This project's goal is to make read-heavy channel programs and zfs(1m)
administrative commands faster by caching all the metadata that they will
need in the dbuf layer. This will prevent the data from being evicted, so
that any future call to i.e. zfs get all won't have to go to disk (very
much).
illumos/illumos-gate@adb52d9262
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Thomas Caputi <tcaputi@datto.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Matthew Ahrens <mahrens@delphix.com>
We should use zfs_dbgmsg instead of spa_dbgmsg. Or at least,
metaslab_condense() should call zfs_dbgmsg because it's important and rare
enough to always log. It's possible that the message in zio_dva_allocate()
would be too high-frequency for zfs_dbgmsg.
illumos/illumos-gate@21f7c81cc1
Reviewed by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Richard Elling <Richard.Elling@RichardElling.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Matthew Ahrens <mahrens@delphix.com>
Currently vdev_label_sync and vdev_uberblock_sync take a zio_t and assume
that its io_private is a pointer to the good_writes count. They should
instead accept this argument explicitly.
illumos/illumos-gate@a3b5583021
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Matthew Ahrens <mahrens@delphix.com>
Mirrors are supposed to provide redundancy in the face of whole-disk failure
and silent damage (e.g. some data on disk is not right, but ZFS hasn't
detected the whole device as being broken). However, the current device
removal implementation bypasses some of the mirror's redundancy.
illumos/illumos-gate@3a4b1be953
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Prashanth Sreenivasa <pks@delphix.com>
Reviewed by: Sara Hartse <sara.hartse@delphix.com>
Reviewed by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Tim Chase <tim@chase2k.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Matthew Ahrens <mahrens@delphix.com>
On high-end systems running async sequential write workloads, especially
NUMA systems with flash or NVMe storage, one significant performance
bottleneck is selecting a metaslab to do allocations from. This process
can be parallelized, providing significant performance increases for
these workloads.
illumos/illumos-gate@f78cdc34af
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com>
Reviewed by: Alexander Motin <mav@FreeBSD.org>
Approved by: Gordon Ross <gwr@nexenta.com>
Author: Paul Dagnelie <pcd@delphix.com>
The current space map encoding has the following disadvantages:
[1] Assuming 512 sector size each entry can represent at most 16MB for a segment.
This makes the encoding very inefficient for large regions of space.
[2] As vdev-wide space maps have started to be used by new features (i.e.
device removal, zpool checkpoint) we've started imposing limits in the
vdevs that can be used with them based on the maximum addressable offset
(currently 64PB for a top-level vdev).
The new remains backwards compatible with the old one. The introduced
two-word entry format, besides extending the limits imposed by the single-entry
layout, also includes a vdev field and some extra padding after its prefix.
The extra padding after the prefix should is reserved for future usage (e.g.
new prefixes for future encodings or new fields for flags). The new vdev field
not only makes the space maps more self-descriptive, but also opens the doors
for pool-wide space maps.
One final important note is that the number of bits used for vdevs is reduced
to 24 bits for blkptrs. That was decided as we don't know of any setups that
use more than 16M vdevs for the time being and
we wanted to fit the vdev field in the space map. In addition that gives us
some extra bits in dva_t.
illumos/illumos-gate@17f11284b4
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <gwilson@zfsmail.com>
Approved by: Gordon Ross <gwr@nexenta.com>
Author: Serapheim Dimitropoulos <serapheim@delphix.com>
illumos/illumos-gate@b6bf6e1540
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Prashanth Sreenivasa <pks@delphix.com>
Approved by: Matt Ahrens <mahrens@delphix.com>
Author: Pavel Zakharov <pavel.zakharov@delphix.com>
(r334844). Most of the changes involve moving some code around to
reduce conflicts with future merges. One of the missing changes
included a notification on scrub cancellation.
Approved by: mav
Sponsored by: iXsystems Inc
quatactl(2) mechanism. (Read-only at this point, however.)
In particular, this is to allow rpc.rquotad query quotas
for NFS mounts, allowing users to see their quotas on the
hosts using the datasets.
The changes specifically:
* Add new RPC entry points for querying quotas.
* Changes the library routines to allow non-UFS quotas.
* Changes rquotad to check for quotas on mounted filesystems,
rather than being limited to entries in /etc/fstab
* Lastly, adds a VFS entry-point for ZFS to query quotas.
Note that this makes one unavoidable behavioural change: if quotas
are enabled, then they can be queried, as opposed to the current
method of checking for quotas being specified in fstab. (With
ZFS, if there are user or group quotas, they're used, always.)
Reviewed by: delphij, mav
Approved by: mav
Sponsored by: iXsystems Inc
Differential Revision: https://reviews.freebsd.org/D15886
d4a72f2386
During scans (scrubs or resilvers), it sorts the blocks in each transaction
group by block offset; the result can be a significant improvement. (On my
test system just now, which I put some effort to introduce fragmentation into
the pool since I set it up yesterday, a scrub went from 1h2m to 33.5m with the
changes.) I've seen similar rations on production systems.
Approved by: Alexander Motin
Obtained from: ZFS On Linux
Relnotes: Yes (improved scrub performance, with tunables)
Differential Revision: https://reviews.freebsd.org/D15562
When we're at our vnode limit, getnewvnode will call into the vnode LRU
cache to free up vnodes. If the vnode we try to recycle is a ZFS vnode we
end up, eventually, in zfs_rmnode. If the ZFS vnode we're recycling
represents something with extended attributes, zfs_rmnode will call
zfs_zget which will attempt to allocate another vnode. If the next vnode we
try to recycle is also a ZFS vnode representing something with extended
attributes we can recurse further. This ends up being unbounded and can end
up overflowing the stack.
In order to avoid this, restructure zfs_rmnode to simply add the extended
attribute directory's object ID to the unlinked set, thus not requiring the
allocation of a vnode. We then schedule a task that calls zfs_unlinked_drain
which will do the work of properly marking the vnodes for unlinking.
zfs_unlinked_drain is also called on mount so these will be cleaned up
there.
Reviewed by: avg, mav
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D15342
Even though there do appear to be more artificial frames, with 12, stack
traces no longer list at all. Revert until a better, more stable value can
be determined.
The 64-bit atomics defined for i386 are currently only available in
the kernel space.
Found by: cy@
MFC after: 1 week
Sponsored by: Mellanox Technologies
While at it add missing _acq_ and _rel_ variants for 64-bit atomic
operations under i386.
Reviewed by: kib @
MFC after: 1 week
Sponsored by: Mellanox Technologies
It turns out that sendfile_swapin() has an optimization where it may
insert pointers to bogus_page into the page array that it passes to
VOP_GETPAGES. That happens to work with buffer cache, because it
extensively uses bogus_page internally, so it has the necessary checks.
However, ZFS did not expect bogus_page as VOP_GETPAGES(9) does not
document such a (ab)use of bogus_page.
So, this commit adds checks and handling of bogus_page.
I expect that use of bogus_page with VOP_GETPAGES will get documented
sooner rather than later.
Reported by: Andrew Reilly <areilly@bigpond.net.au>, delphij
Tested by: Andrew Reilly <areilly@bigpond.net.au>
Requested by: many
MFC after: 1 week
Creating a pool with a temporary name fails when we also specify custom
dataset properties: this is because we mistakenly call
zfs_set_prop_nvlist() on the "real" pool name which, as expected,
cannot be found because the SPA is present in the namespace with the
temporary name.
Fix this by specifying the correct pool name when setting the dataset
properties.
Author: loli10K <ezomori.nozomu@gmail.com>
Reviewed-by: Prakash Surya <prakash.surya@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Obtained from: ZFS on Linux, zfsonlinux/zfs@4ceb8dd6fd
MFC after: 1 week
unwind_frame() may be instrumented by FBT, leading to recursion into
dtrace_probe(). Manually inline unwind_frame() as we do with stack
unwinding code for other architectures.
Submitted by: Domagoj Stolfa
Reviewed by: manu
MFC after: 1 week
Sponsored by: DARPA / AFRL
Differential Revision: https://reviews.freebsd.org/D15359
- Add macros to allow preinitialization of cap_rights_t.
- Convert most commonly used code paths to use preinitialized cap_rights_t.
A 3.6% speedup in fstat was measured with this change.
Reported by: mjg
Reviewed by: oshogbo
Approved by: sbruno
MFC after: 1 month
by doing most of the work in a new function prison_add_vfs in kern_jail.c
Now a jail-enabled filesystem need only mark itself with VFCF_JAIL, and
the rest is taken care of. This includes adding a jail parameter like
allow.mount.foofs, and a sysctl like security.jail.mount_foofs_allowed.
Both of these used to be a static list of known filesystems, with
predefined permission bits.
Reviewed by: kib
Differential Revision: D14681
While here predict false.
Note the code is wrong (regardless of this change). Dereference of the
pointer can race with module unload. A fix would set the probe to a
nop stub instead of NULL.
Each malloc/free was testing dtrace_malloc_enabled and forcing
extra reads from the malloc type struct to see if perhaps a
dtmalloc probe was on.
Treat it like lockstat and sdt: have a global bolean.
When the compressed ARC feature was added in commit d3c2ae1
the method of reference counting in the ARC was modified. As
part of this accounting change the arc_buf_add_ref() function
was removed entirely.
This would have be fine but the arc_buf_add_ref() function
served a second undocumented purpose of updating the ARC access
information when taking a hold on a dbuf. Without this logic
in place a cached dbuf would not migrate its associated
arc_buf_hdr_t to the MFU list. This would negatively impact
the ARC hit rate, particularly on systems with a small ARC.
This change reinstates the missing call to arc_access() from
dbuf_hold() by implementing a new arc_buf_access() function.
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Tim Chase <tim@chase2k.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
The change adds -t <name> option to zpool create and -t option to zpool
import in its form with an old name and a new name. This allows to
import (or create) a pool under a name that's different from its real,
permanent name without affecting that name. This is useful when working
with VM images or images of other physical systems if they happen to
have a ZFS pool with the same name as the host system.
The changes come from ZoL with some small tweaks.
The porting has been done by julian.
The change is being submitted to OpenZFS:
https://github.com/openzfs/openzfs/pull/600
Submitted by: julian
Reviewed by: smh
MFC after: 2 weeks
Sponsored by: Panzura (porting)
Differential Revision: https://reviews.freebsd.org/D14972
Page daemon output is now regulated by a PID controller with a setpoint
of v_free_target. Moreover, the page daemon now wakes up regularly
rather than waiting for a wakeup from another thread. This means that
the free page count is unlikely to drop below the old
zfs_arc_free_target value, and as a result the ARC was not readily
freeing pages under memory pressure. Address the immediate problem by
updating zfs_arc_free_target to match the page daemon's new behaviour.
Reported and tested by: truckman
Discussed with: jeff
X-MFC with: r329882
Differential Revision: https://reviews.freebsd.org/D14994
This helps catch cases where an instrumented function is called while
in probe context.
Submitted by: Domagoj Stolfa <domagoj.stolfa@gmail.com>
MFC after: 2 weeks
Sponsored by: DARPA/AFRL
Differential Revision: https://reviews.freebsd.org/D14863
Device removal code does not set spa_indirect_vdevs_loaded for pools
that never experienced device removal. At least one visual consequence
of it is completely blocked speculative prefetcher. This patch sets
the variable in such situations.
9280 Assertion failure while running removal_with_ganging test with 4K devices
illumos/illumos-gate@243952c7ee
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Approved by: Garrett D'Amore <garrett@damore.org>
Author: Matt Ahrens <Matt.Ahrens@delphix.com>
9188 increase size of dbuf cache to reduce indirect block decompression
illumos/illumos-gate@268bbb2a2f
With compressed ARC (6950) we use up to 25% of our CPU to decompress indirect
blocks, under a workload of random cached reads. To reduce this decompression
cost, we would like to increase the size of the dbuf cache so that more
indirect blocks can be stored uncompressed.
If we are caching entire large files of recordsize=8K, the indirect blocks
use 1/64th as much memory as the data blocks (assuming they have the same
compression ratio). We suggest making the dbuf cache be 1/32nd of all memory,
so that in this scenario we should be able to keep all the indirect blocks
decompressed in the dbuf cache. (We want it to be more than the 1/64th that
the indirect blocks would use because we need to cache other stuff in the
dbuf cache as well.)
In real world workloads, this won't help as dramatically as the example
above, but we think it's still worth it because the risk of decreasing
performance is low. The potential negative performance impact is that we
will be slightly reducing the size of the ARC (by ~3%).
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Prashanth Sreenivasa <pks@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Sanjay Nadkarni <sanjay.nadkarni@nexenta.com>
Reviewed by: Allan Jude <allanjude@freebsd.org>
Reviewed by: Igor Kozhukhov <igor@dilos.org>
Approved by: Garrett D'Amore <garrett@damore.org>
Author: George Wilson <george.wilson@delphix.com>
9321 arc_loan_compressed_buf() can increment arc_loaned_bytes by the wrong value
illumos/illumos-gate@9be12bd737
arc_loan_compressed_buf() increments arc_loaned_bytes by psize unconditionally
In the case of zfs_compressed_arc_enabled=0, when the buf is returned via
arc_return_buf(), if ARC_BUF_COMPRESSED(buf) is false, then arc_loaned_bytes
is decremented by lsize, not psize.
Switch to using arc_buf_size(buf), instead of psize, which will return
psize or lsize, depending on the result of ARC_BUF_COMPRESSED(buf).
Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Garrett D'Amore <garrett@damore.org>
Author: Allan Jude <allanjude@freebsd.org>
9235 rename zpool_rewind_policy_t to zpool_load_policy_t
illumos/illumos-gate@5dafeea3eb
We want to be able to pass various settings during import/open of a pool,
which are not only related to rewind. Instead of adding a new policy and
duplicate a bunch of code, we should just rename rewind_policy to a more
generic term like load_policy.
For instance, we'd like to set spa->spa_import_flags from the nvlist,
rather from a flags parameter passed to spa_import as in some cases we want
those flags not only for the import case, but also for the open case. One
such flag could be ZFS_IMPORT_MISSING_LOG (as used in zdb) which would
allow zfs to open a pool when logs are missing.
Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Pavel Zakharov <pavel.zakharov@delphix.com>
9191 dump vdev tree to zfs_dbgmsg when spa load fails due to missing log devices
illumos/illumos-gate@ccef24b493
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Matt Ahrens <matt@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Pavel Zakharov <pavel.zakharov@delphix.com>
9187 racing condition between vdev label and spa_last_synced_txg in vdev_validate
illumos/illumos-gate@d1de72cfa2
ztest failed with uncorrectable IO error despite having the fix for #7163.
Both sides of the mirror have CANT_OPEN_BAD_LABEL, which also distinguishes
it from that issue.
Definitely seems like a racing condition between the vdev_validate and spa_sync:
1. Thread A (spa_sync): vdev label is updated to latest txg
2. Thread B (vdev_validate): vdev label's txg is compared to spa_last_synced_txg and is ahead.
3. Thread A (spa_sync): spa_last_synced_txg is updated to latest txg.
Solution: do not check txg in vdev_validate unless config lock is held.
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Matt Ahrens <matthew.ahrens@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Pavel Zakharov <pavel.zakharov@delphix.com>
illumos/illumos-gate@8671400134
The idea of Storage Pool Checkpoint (aka zpool checkpoint) deals with
exactly that. It can be thought of as a “pool-wide snapshot” (or a
variation of extreme rewind that doesn’t corrupt your data). It remembers
the entire state of the pool at the point that it was taken and the user
can revert back to it later or discard it. Its generic use case is an
administrator that is about to perform a set of destructive actions to ZFS
as part of a critical procedure. She takes a checkpoint of the pool before
performing the actions, then rewinds back to it if one of them fails or puts
the pool into an unexpected state. Otherwise, she discards it. With the
assumption that no one else is making modifications to ZFS, she basically
wraps all these actions into a “high-level transaction”.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com>
It's not sufficient nor required to use the vnode interlock when
checking if we are going to drop the last use count as the code in
vputx() uses refcount (atomic) operations for both checking and
decrementing the use code. Apply the same method to vn_rele_async().
While here, remove vn_rele_inactive(), a wrapper around vrele() that
didn't add any value.
Also, the change required making vfs_refcount_release_if_not_last()
public. I've made vfs_refcount_acquire_if_not_zero() public as well.
They are in sys/refcount.h now. While making the move I've dropped the
vfs_ prefix.
Reviewed by: mjg
MFC after: 2 weeks
Sponsored by: Panzura
Differential Revision: https://reviews.freebsd.org/D14869
These have been supplanted by the MI signal information codes in
<sys/signal.h> since 7.0. The FPE_*_TRAP ones were deprecated even
earlier in 1999.
PR: 226579 (exp-run)
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D14637
vdev_dbgmsg_print_tree printed vdev_id of uint64_t type with %u format
specifier. That caused subsequent parameters to be incorrectly read
from the stack and lead to a crash when a wrong value was interpreted as
a string pointer.
This should be upstreamed.
Reported by: pho
MFC after: 3 days
illumos/illumos-gate@edc8ef7d92
Reviewed by: C Fraire <cfraire@me.com>
Reviewed by: Andy Fiddaman <omnios@citrus-it.co.uk>
Approved by: Joshua M. Clulow <josh@sysmgr.org>
Author: Toomas Soome <tsoome@me.com>
In pursuit of improving performance on multi-core systems, we should
implements fanned out counters and use them to improve the performance of
some of the arc statistics. These stats are updated extremely frequently,
and can consume a significant amount of CPU time.
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Dan McDonald <danmcd@joyent.com>
Author: Paul Dagnelie <pcd@delphix.com>
assym is only to be included by other .s files, and should never
actually be assembled by itself.
Reviewed by: imp, bdrewery (earlier)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D14180
illumos/illumos-gate@5f5913bb835f5913bb83https://www.illumos.org/issues/9164
This issue has been reported by Alan Somers as
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=225877
dmu_objset_refresh_ownership() first disowns a dataset (and releases
it) and then owns it again. There is an assert that the new dataset
object is the same as the old dataset object. When running ZFS Test
Suite on FreeBSD we see this panic from zpool_upgrade_007_pos test:
panic: solaris assert: newds == os->os_dsl_dataset (0xfffff80045f4c000
== 0xfffff80021ab4800)
I see that the old dataset has dsl_dataset_evict_async() pending in
ds_dbu.dbu_tqent and its ds_dbuf is NULL.
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Don Brady <don.brady@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Andriy Gapon <avg@FreeBSD.org>
PR: 225877
Reported by: asomers
MFC after: 1 week
Update the ZFS TRIM code to ensure it respects VTOC8 partition headers as
documented by the ZFS On-Disk Specification section 1.3
Before this a zpool create on a VTOC8 partitioned device would overwrite the
partition metadata.
Reported by: marius
Reviewed by: marius agv
MFC after: 1 week
Sponsored by: Multiplay
illumos/illumos-gate@e9bacc6d1ae9bacc6d1ahttps://www.illumos.org/issues/8984
Consider a directory configured as:
drwx-ws---+ 2 henson cpp 3 Jan 23 12:35 dropbox/
user:henson:rwxpdDaARWcC--:f-i----:allow
owner@:--------------:f-i----:allow
group@:--------------:f-i----:allow
everyone@:--------------:f-i----:allow
owner@:rwxpdDaARWcC--:-di----:allow
group:cpp:-wx-----------:-------:allow
owner@:rwxpdDaARWcC--:-------:allow
A new file created in this directory ends up looking like:
rw-r--r-+ 1 astudent cpp 0 Jan 23 12:39 testfile
user:henson:rw-pdDaARWcC--:------I:allow
owner@:--------------:------I:allow
group@:--------------:------I:allow
everyone@:--------------:------I:allow
owner@:rw-p--aARWcCos:-------:allow
group@:r-----a-R-c--s:-------:allow
everyone@:r-----a-R-c--s:-------:allow
with extraneous group@ and everyone@ entries allowing read access that
shouldn't exist.
Per Albert Lee on the zfs mailing list:
"aclinherit=passthrough/passthrough-x should still
ignore the requested mode when an inheritable ACE for owner@ group@,
or everyone@ is present in the parent directory.
It appears there was an oversight in my fix for
https://www.illumos.org/issues/6764 which made calling zfs_acl_chmod
from zfs_acl_inherit unconditional. I think the parent ACL check for
aclinherit=passthrough needs to be reintroduced in zfs_acl_inherit."
We have a large number of faculty who use dropbox directories like the example
to have students submit projects. All of these directories are now allowing
Reviewed by: Sam Zaydel <szaydel@racktopsystems.com>
Reviewed by: Paul B. Henson <henson@acm.org>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Approved by: Matthew Ahrens <mahrens@delphix.com>
Author: Dominik Hassler <hadfl@omniosce.org>
PR: 216886
MFC after: 2 weeks
Those operations, zfsctl_snapdir_readdir and zfsctl_snapdir_getattr,
access the filesystem's objset and it can be unstable during operations
like receive and rollback.
MFC after: 2 weeks
It gets called by dmu_buf_init_user, which is inline but not static. So it
needs global linkage itself.
Reported by: GCC-6
MFC after: 17 days
X-MFC-With: 329722
This change is designed to account for yet another difference between
illumos and FreeBSD VFS. In FreeBSD a filesystem driver is supposed to
clean up mnt_data in its VFS_UNMOUNT method because it's the last call
into the driver before a struct mount object is destroyed. The VFS
drains all references to the object before destroying it, but for the
driver it's already as good as gone.
In contrast, illumos VFS provides another method, VFS_FREEVFS, that is
called when all references are drained. So, the driver can keep its
data after VFS_UNMOUNT and clean it up in VFS_FREEVFS after all
references are gone. This is what ZFS does on illumos.
So there a reference to a filesystem is sufficient to guarantee that the
ZFS specific data, aka zfsvfs_t, stays around (even if the filesystem
gets unmounted). In FreeBSD we need to vfs_busy the filesystem to get
the same guarantee. vfs_ref guarantees only that the struct mount is
kept.
The following rules should be observed in getzfsvfs / getzfsvfs_impl on
FreeBSD:
- if we need access to zfsvfs_t then we must use vfs_busy
- if only we need to access struct mount (aka vfs_t), then vfs_ref is
enough
- when illumos code actually needs only the vfs_t, they still can pass
the zfsvfs_t and get the vfs_t from it; that can work in FreeBSD if
the filesystem is busied, but when it's just referenced then we have
to pass the vfs_t explicitly
- we cannot call vfs_busy while holding a dataset because that creates a
LOR with dp_config_rwlock
As a result:
- getzfsvfs_impl now only references the filesystem, same as in illumos,
but unlike illumos it has to return the vfs_t
- the consumers are updated to account for the change
- getzfsvfs busies the filesystem (and drops the reference from
getzfsvfs_impl)
Also, zfs_unmount_snap() now gets a busied a filesystem, references it
and then unbusies it essentially reverting actions done in getzfsvfs.
This is needed because the code may perform some checks that require the
zfsvfs_t. So, those are done before the unbusying.
MFC after: 2 weeks
vrele() acquires the vnode lock only if the hold count drops to zero.
In other scenarios it needs only the interlock. So,
zfsctl_snapdir_lookup() can race with vfs_mount_destroy() -> vrele()
such that the lookup adds a new reference and then vrele() drops the
mountpoint's reference and only then we check the reference count.
It would be just one in this case.
In fact, the assert should have been removed in r323483 when the code
learned how to deal with the uncovered vnode.
PR: 225795
MFC after: 4 days
X-MFC with: r329556
9080 recursive enter of vdev_indirect_rwlock from vdev_indirect_remap()
illumos/illumos-gate@bdfded42e6
A scenario came up where a callback executed by vdev_indirect_remap() on a vdev, calls
vdev_indirect_remap() on the same vdev and tries to reacquire vdev_indirect_rwlock that
was already acquired from the first call to vdev_indirect_remap(). The specific scenario,
is that we want to remap a block pointer that is snapshoted but its dataset's remap_deadlist
is not cached. So in order to add it we issue a read through a vdev_indirect_remap() on the
same vdev, which brings up the aforementioned issue.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Hans Rosenfeld <rosenfeld@grumpf.hope-2000.org>
Author: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com>
9079 race condition in starting and ending condesing thread for indirect vdevs
illumos/illumos-gate@667ec66f1b
The timeline of the race condition is the following:
[1] Thread A is about to finish condesing the first vdev in spa_condense_indirect_thread(),
so it calls the spa_condense_indirect_complete_sync() sync task which sets the
spa_condensing_indirect field to NULL. Waiting for the sync task to finish, thread A
sleeps until the txg is done. When this happens, thread A will acquire spa_async_lock
and set spa_condense_thread to NULL.
[2] While thread A waits for the txg to finish, thread B which is running spa_sync() checks
whether it should condense the second vdev in vdev_indirect_should_condense() by checking
the spa_condensing_indirect field which was set to NULL by spa_condense_indirect_thread()
from thread A. So it goes on and tries to spawn a new condensing thread in
spa_condense_indirect_start_sync() and the aforementioned assertions fails because thread A
has not set spa_condense_thread to NULL (which is basically the last thing it does before
returning).
The main issue here is that we rely on both spa_condensing_indirect and spa_condense_thread to
signify whether a condensing thread is running. Ideally we would only use one throughout the
codebase. In addition, for managing spa_condense_thread we currently use spa_async_lock which
basically tights condensing to scrubing when it comes to pausing and resuming those actions
during spa export.
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Approved by: Hans Rosenfeld <rosenfeld@grumpf.hope-2000.org>
Author: Serapheim Dimitropoulos <serapheim@delphix.com>
9075 Improve ZFS pool import/load process and corrupted pool recovery
illumos/illumos-gate@6f7938128a
Some work has been done lately to improve the debugability of the ZFS pool
load (and import) process. This includes:
https://www.illumos.org/issues/7638: Refactor spa_load_impl into several functions
https://www.illumos.org/issues/8961: SPA load/import should tell us why it failed
https://www.illumos.org/issues/7277: zdb should be able to print zfs_dbgmsg's
To iterate on top of that, there's a few changes that were made to make the
import process more resilient and crash free. One of the first tasks during the
pool load process is to parse a config provided from userland that describes
what devices the pool is composed of. A vdev tree is generated from that config,
and then all the vdevs are opened.
The Meta Object Set (MOS) of the pool is accessed, and several metadata objects
that are necessary to load the pool are read. The exact configuration of the
pool is also stored inside the MOS. Since the configuration provided from
userland is external and might not accurately describe the vdev tree
of the pool at the txg that is being loaded, it cannot be relied upon to safely
operate the pool. For that reason, the configuration in the MOS is read early
on. In the past, the two configurations were compared together and if there was
a mismatch then the load process was aborted and an error was returned.
The latter was a good way to ensure a pool does not get corrupted, however it
made the pool load process needlessly fragile in cases where the vdev
configuration changed or the userland configuration was outdated. Since the MOS
is stored in 3 copies, the configuration provided by userland doesn't have to be
perfect in order to read its contents. Hence, a new approach has been adopted:
The pool is first opened with the untrusted userland configuration just so that
the real configuration can be read from the MOS. The trusted MOS configuration
is then used to generate a new vdev tree and the pool is re-opened.
When the pool is opened with an untrusted configuration, writes are disabled
to avoid accidentally damaging it. During reads, some sanity checks are
performed on block pointers to see if each DVA points to a known vdev;
when the configuration is untrusted, instead of panicking the system if those
checks fail we simply avoid issuing reads to the invalid DVAs.
This new two-step pool load process now allows rewinding pools accross
vdev tree changes such as device replacement, addition, etc. Loading a pool
from an external config file in a clustering environment also becomes much
safer now since the pool will import even if the config is outdated and didn't,
for instance, register a recent device addition.
With this code in place, it became relatively easy to implement a
long-sought-after feature: the ability to import a pool with missing top level
(i.e. non-redundant) devices. Note that since this almost guarantees some loss
Of data, this feature is for now restricted to a read-only import.
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Andrew Stormont <andyjstormont@gmail.com>
Approved by: Hans Rosenfeld <rosenfeld@grumpf.hope-2000.org>
Author: Pavel Zakharov <pavel.zakharov@delphix.com>
illumos/illumos-gate@add927f8c8
Reported on the ZFSonLinux https://github.com/zfsonlinux/zfs/issues/4843,
fixed by https://github.com/zfsonlinux/zfs/pull/6339:
If we are in the middle of an incremental zfs receive, the child .../%recv
will exist. If you concurrently run zfs promote .../%recv, it will "work",
but then zfs gets confused. For example, there's no obvious way to destroy
the containing filesystem (because it is now a clone of its invisible child).
Attempting to do this promote should be an error. We could fix this by
having zfs_ioc_promote() check if zc_name contains a %, similar to
zfs_ioc_rename().
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Dan McDonald <danmcd@joyent.com>
Author: loli10K <ezomori.nozomu@gmail.com>
illumos/illumos-gate@f4c1745bd6
Illumos 4080 allows "zpool clear" to work on readonly pools: i don't think
this is the intended behaviour, we shouldn't be allowed to clear readonly
pools. Probably.
A fix is already in the ZFS on Linux repository to addess this issue:
92e43c1718
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Dan McDonald <danmcd@joyent.com>
Author: loli10K <ezomori.nozomu@gmail.com>
8408 dsl_props_set_sync_impl() does not handle nested nvlists correctly
illumos/illumos-gate@85723e5eec
When iterating over the input nvlist in dsl_props_set_sync_impl() when we
don't preserve the nvpair name before looking up ZPROP_VALUE, so when we
later go to process it nvpair_name() is always "value" instead of the actual
property name.
This results in a couple of bugs in the recv code:
- received properties are not restored correctly when failing to receive
an incremental send stream
- received properties are not completely replaced by the new ones when
successfully receiving an incremental send stream
This was discovered on ZFS on Linux (fixed in
5f1346c299)
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Dan McDonald <danmcd@joyent.com>
Author: loli10K <ezomori.nozomu@gmail.com>
illumos/illumos-gate@46ac8fdfc5
Reviewed by: Yuri Pankov <yuripv@yuripv.net>
Reviewed by: Andy Fiddaman <omnios@citrus-it.co.uk>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Dan McDonald <danmcd@joyent.com>
Author: Toomas Soome <tsoome@me.com>
illumos/illumos-gate@e144c4e6c9
Currently `zdb` consistently fails to examine non-idle pools as it fails
during the `spa_load()` process. The main problem seems to be that
`spa_load_verify()` fails as can be seen below:
$ sudo zdb -d -G dcenter
zdb: can't open 'dcenter': I/O error
ZFS_DBGMSG(zdb):
spa_open_common: opening dcenter
spa_load(dcenter): LOADING
disk vdev '/dev/dsk/c4t11d0s0': best uberblock found for spa dcenter. txg 40824950
spa_load(dcenter): using uberblock with txg=40824950
spa_load(dcenter): UNLOADING
spa_load(dcenter): RELOADING
spa_load(dcenter): LOADING
disk vdev '/dev/dsk/c3t10d0s0': best uberblock found for spa dcenter. txg 40824952
spa_load(dcenter): using uberblock with txg=40824952
spa_load(dcenter): FAILED: spa_load_verify failed [error=5]
spa_load(dcenter): UNLOADING
This change makes `spa_load_verify()` a dryrun when ran from `zdb`. This is
done by creating a global flag in zfs and then setting it in `zdb`.
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Andy Stormont <astormont@racktopsystems.com>
Approved by: Dan McDonald <danmcd@joyent.com>
Author: Pavel Zakharov <pavel.zakharov@delphix.com>
illumos/illumos-gate@3ee8c80c74
When we fail to open or import a storage pool, we typically don't get any
additional diagnostic information, just "no pool found" or "can not import".
While there may be no additional user-consumable information, we should at
least make this situation easier to debug/diagnose for developers and support.
For example, we could start by using `zfs_dbgmsg()` to log each thing that we
try when importing, and which things failed. E.g. "tried uberblock of txg X
from label Y of device Z". Also, we could log each of the stages that we go
through in `spa_load_impl()`.
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Andrew Stormont <andyjstormont@gmail.com>
Approved by: Dan McDonald <danmcd@joyent.com>
Author: Pavel Zakharov <pavel.zakharov@delphix.com>
illumos/illumos-gate@1fd3785ff6
spa_load_impl has grown out of proportions. It is currently over 700
lines long and makes it very hard to follow or debug the import process
even for experienced ZFS developers. The objective is to split it up
in a series of well commented functions.
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Andrew Stormont <andyjstormont@gmail.com>
Approved by: Dan McDonald <danmcd@joyent.com>
Author: Pavel Zakharov <pavel.zakharov@delphix.com>
illumos/illumos-gate@36a64e6284
To prevent kmem_cache reaping from blocking other system resources, turn
kmem_cache_reap_now() (which blocks) into kmem_cache_reap_soon(). Callers
to kmem_cache_reap_soon() should use kmem_cache_reap_active(), which
exploits #9017's new taskq_empty().
Reviewed by: Bryan Cantrill <bryan@joyent.com>
Reviewed by: Dan McDonald <danmcd@joyent.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Yuri Pankov <yuripv@yuripv.net>
Author: Tim Kordas <tim.kordas@joyent.com>
FreeBSD does not use taskqueue for kmem caches reaping, so this change
is less dramatic then it is on Illumos, just limiting reaping to 1 time
per second. It may possibly be improved later, if needed.
illumos/illumos-gate@f06dce2c1f
Reviewed by: Sebastien Roy <sebastien.roy@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Gordon Ross <gordon.w.ross@gmail.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Andrew Stormont <astormont@racktopsystems.com>
illumos/illumos-gate@0fb055e81f
At present it is possible to boot from a root pool that is on RAIDZ but not
one that is on RAIDZ2 or RAIDZ3. This is because, at the time the pool
version is checked to ensure support for dual/triple parity, the uberblock
has not yet been loaded into the SPA and therefore the code determines that
the pool version is too old and returns ENOTSUP.
Reviewed by: Igor Kozhukhov <igor@dilos.org>
Reviewed by: Andriy Gapon <avg@FreeBSD.org>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Andy Stormont <astormont@racktopsystems.com>
Reviewed by: Toomas Soome <tsoome@me.com>
Approved by: Gordon Ross <gwr@nexenta.com>
Author: Andy Fiddaman <omnios@citrus-it.co.uk>
FreeBSD already had this fixed, so this is just a diff reduction.
illumos/illumos-gate@5cabbc6b49https://www.illumos.org/issues/7614:
This project allows top-level vdevs to be removed from the storage pool with
“zpool remove”, reducing the total amount of storage in the pool. This
operation copies all allocated regions of the device to be removed onto other
devices, recording the mapping from old to new location. After the removal is
complete, read and free operations to the removed (now “indirect”) vdev must
be remapped and performed at the new location on disk. The indirect mapping
table is kept in memory whenever the pool is loaded, so there is minimal
performance overhead when doing operations on the indirect vdev.
The size of the in-memory mapping table will be reduced when its entries
become “obsolete” because they are no longer used by any block pointers in
the pool. An entry becomes obsolete when all the blocks that use it are
freed. An entry can also become obsolete when all the snapshots that
reference it are deleted, and the block pointers that reference it have been
“remapped” in all filesystems/zvols (and clones). Whenever an indirect block
is written, all the block pointers in it will be “remapped” to their new
(concrete) locations if possible. This process can be accelerated by using
the “zfs remap” command to proactively rewrite all indirect blocks that
reference indirect (removed) vdevs.
Note that when a device is removed, we do not verify the checksum of the data
that is copied. This makes the process much faster, but if it were used on
redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy
the wrong data, when we have the correct data on e.g. the other side of the
mirror. Therefore, mirror and raidz devices can not be removed.
Reviewed by: Alex Reece <alex@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Richard Laager <rlaager@wiktel.com>
Reviewed by: Tim Chase <tim@chase2k.com>
Approved by: Garrett D'Amore <garrett@damore.org>
Author: Prashanth Sreenivasa <pks@delphix.com>
illumos/illumos-gate@95643f75d295643f75d2https://www.illumos.org/issues/8520
lzc_rollback_to() should support rolling back to a clone's origin.
The current checks in zfs_ioc_rollback() would not allow that because the
origin snapshot belongs to a different filesystem.
The overly restrictive check was introduced in 7600, but it was not a
regression as none of the existing tools provided a way to rollback to the
origin.
https://www.illumos.org/issues/7198
EINVAL is returned when a dataset does not have any snapshots, so there is
nothing to roll back to.
Although the code in zfs_do_rollback checks for that condition in advance, it's
still possible that the snapshot(s) gets removed after the check and before the
rollback sync task is executed.
At the moment zfs command would crash when that happens.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Dan McDonald <danmcd@joyent.com>
Author: Andriy Gapon <avg@FreeBSD.org>
MFC after: 2 weeks
illumos/illumos-gate@f864f99efef864f99efehttps://www.illumos.org/issues/8997
When dmu_tx_assign is called from zil_lwb_write_issue, it's possible
for either ERESTART or EIO to be returned.
If ERESTART is returned, this will cause an assertion to fail directly
in zil_lwb_write_issue, where the code assumes the return value is
EIO if dmu_tx_assign returns a non-zero value. This can occur if the
SPA is suspended when dmu_tx_assign is called, and most often occurs
when running zloop.
If EIO is returned, this can cause assertions to fail elsewhere in the
ZIL code. For example, zil_commit_waiter_timeout contains the
following logic:
lwb_t *nlwb = zil_lwb_write_issue(zilog, lwb);
ASSERT3S(lwb->lwb_state, !=, LWB_STATE_OPENED);
In this case, if dmu_tx_assign returned EIO from within
zil_lwb_write_issue, the lwb variable passed in will not be issued
to disk. Thus, it's lwb_state field will remain LWB_STATE_OPENED and
this assertion will fail. zil_commit_waiter_timeout assumes that after
it calls zil_lwb_write_issue, the lwb will be issued to disk, and
doesn't handle the case where this is not true; i.e. it doesn't handle
the case where dmu_tx_assign returns EIO.
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Andriy Gapon <avg@FreeBSD.org>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Prakash Surya <prakash.surya@delphix.com>
MFC after: 3 weeks
illumos/illumos-gate@a6c1eb3c08a6c1eb3c08https://www.illumos.org/issues/8731
annotate_ecksum() asserts that nui64s, calculated as nui64s = size / sizeof
(uint64_t), is not greater than UINT16_MAX.
This restriction is needed because histograms of incorrectly set and cleared
bits have 16 bit counters and if the buffer consists of too many 64-bit words,
then a counter can potentially overflow producing an incorrect result.
When the largest buffer size was 128KB the greatest value of nui64s was 16K,
well within the limit.
But now we have support for large buffers and for buffer sizes of 512KB and
above the restriction is violated.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Dan McDonald <danmcd@joyent.com>
Author: Andriy Gapon <avg@FreeBSD.org>
MFC after: 2 weeks
illumos/illumos-gate@3f7978d02b3f7978d02bhttps://www.illumos.org/issues/8081
zdb(8) is full of minor problems that generate compiler warnings. On FreeBSD,
which uses -WError, the only way to build it is to disable all compiler
warnings. This makes it much harder to detect newly introduced bugs. We should
cleanup all the warnings.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Alan Somers <asomers@gmail.com>
illumos/illumos-gate@5f10ef697f5f10ef697fhttps://www.illumos.org/issues/6396
LVM = SVM = Solaris Volume Manager
dead code and not using with ZFS based platform.
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Reviewed by: Toomas Soome <tsoome@me.com>
Approved by: Hans Rosenfeld <rosenfeld@grumpf.hope-2000.org>
Author: Yuri Pankov <yuri.pankov@nexenta.com>
illumos/illumos-gate@7855d95b307855d95b30https://www.illumos.org/issues/7446
Since we support whole-disk configuration for boot pool, we also will need
whole disk support with UEFI boot and for this, zpool create should create efi-
system partition.
I have borrowed the idea from oracle solaris, and introducing zpool create -
B switch to provide an way to specify that boot partition should be created.
However, there is still an question, how big should the system partition be.
For time being, I have set default size 256MB (thats minimum size for FAT32
with 4k blocks). To support custom size, the set on creation "bootsize"
property is created and so the custom size can be set as: zpool create B -
o bootsize=34MB rpool c0t0d0
After pool is created, the "bootsize" property is read only. When -B switch is
not used, the bootsize defaults to 0 and is shown in zpool get output with
value ''. Older zfs/zpool implementations are ignoring this property.
https://www.illumos.org/rb/r/219/
Reviewed by: Andrew Stormont <andyjstormont@gmail.com>
Reviewed by: Yuri Pankov <yuri.pankov@gmail.com>
Approved by: Dan McDonald <danmcd@kebe.com>
Author: Toomas Soome <tsoome@me.com>
This commit makes no sense for FreeBSD, that is why I blocked the option,
but it should be good to stay closer to upstream.
illumos/illumos-gate@48bbca816848bbca8168https://www.illumos.org/issues/7812
This change removes all gendered language that did not refer specifically
to an individual person or pet. The convention taken was to use
variations on "they" when referring to users and/or human beings, while
using "it" when referring to code, functions, and/or libraries.
Additionally, we took the liberty to fix up any whitespace issues that
were found in any files that were already being modified.
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Steve Gonczi <steve.gonczi@delphix.com>
Reviewed by: Chris Williamson <chris.williamson@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Igor Kozhukhov <igor@dilos.org>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Reviewed by: Robert Mustacchi <rm@joyent.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Daniel Hoffman <dj.hoffman@delphix.com>
Since r323578 we may remove the last reference to a covered vnode with
vrele() instead of vput(). So, v_usecount may be decremented before
the vnode is locked and zfsctl_snapdir_lookup may "catch" the vnode
with v_usecount of zero and v_holdcnt of one.
PR: 225795
Reported by: asomers
MFC after: 1 week
ZFS caches blocks it reads in its ARC, so in general the optional
pages are not as useful as with filesystems that read the data
directly into the target pages. But still the optional pages
are useful to reduce the number of page faults and associated
VM / VFS / ZFS calls.
Another case that gets optimized (as a side effect) is paging in
from a hole. ZFS DMU does not currently provide a convenient
API to check for a hole. Instead it creates a temporary zero-filled
block and allows accessing it as if it were a normal data block.
Getting multiple pages one by one from a hole results in repeated
creation and destruction of the temporary block (and an associated
ARC header).
Tested with fsx using various supported blocks sizes from 512 bytes
to 128 KB and additionally 1 MB.
Please note that in illumos and ZoL they do not do the range-locking in
the page-in path. This is because ZFS has a double-caching problem
between ARC and page cache and that requires zfs_read() and zfs_write()
to consult pages in the page cache. So, in those functions they first
lock a range and then lock pages corresponding to the range. While in
the page-in (and maybe page-out) path they first lock the pages and then
would lock the range. So, they would have a deadlock.
I believe that FreeBSD does not have that problem, because the page-in
deals only with invalid pages while zfs_read() and zfs_write() need to
access only valid pages. They do not wait on a busy page unless it's
already valid.
Reviewed by: kib
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D14263
illumos/illumos-gate@d6e1c446d7d6e1c446d7https://www.illumos.org/issues/8857
I had an OS panic on one of our servers:
ffffff01809128c0 vpanic()
ffffff01809128e0 mutex_panic+0x58(fffffffffb94c904, ffffff597dde7f80)
ffffff0180912950 mutex_vector_enter+0x347(ffffff597dde7f80)
ffffff01809129b0 zio_remove_child+0x50(ffffff597dde7c58, ffffff32bd901ac0,
ffffff3373370908)
ffffff0180912a40 zio_done+0x390(ffffff32bd901ac0)
ffffff0180912a70 zio_execute+0x78(ffffff32bd901ac0)
ffffff0180912b30 taskq_thread+0x2d0(ffffff33bae44140)
ffffff0180912b40 thread_start+8()
It panicked here:
http://src.illumos.org/source/xref/illumos-gate/usr/src/uts/common/fs/zfs/
zio.c#430
pio->io_lock is DEAD, thus a panic. Further analysis shows the "pio"
(parent zio of "cio") has already been destroyed.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Andriy Gapon <avg@FreeBSD.org>
Reviewed by: Youzhong Yang <youzhong@gmail.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: George Wilson <george.wilson@delphix.com>
PR: 223803
Tested by: shiva.bhanujan@quorum.com
MFC after: 2 weeks
zfsctl_common_pathconf will report all the same variables that regular ZFS
volumes report. zfsctl_common_getacl will report an ACL equivalent to 555,
except that you can't read xattrs or edit attributes.
Fixes a bug where "ls .zfs" will occasionally print something like:
ls: .zfs/.: Operation not supported
PR: 225793
Reviewed by: avg
MFC after: 3 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D14365
global to per-domain state. Protect reservations with the free lock
from the domain that they belong to. Refactor to make vm domains more
of a first class object.
Reviewed by: markj, kib, gallatin
Tested by: pho
Sponsored by: Netflix, Dell/EMC Isilon
Differential Revision: https://reviews.freebsd.org/D14000
We did that in the case of success to prevent the use of stale cached
data, but it makes even less sense to keep the cached data when we fail.
Ideally, we should call vgone() on the vnode in the case of zfs_rezget
failure, but the current lock order prevents us from doing that.
The change also rearranges the order of unlinked check and the size
change check.
While there, add missing SET_ERROR in one of the error paths.
MFC after: 2 weeks
illumos/illumos-gate@5cb8d943bchttps://www.illumos.org/issues/8835:
Sequential reads not aligned to block size are not detected by ZFS
prefetcher as sequential, killing prefetch and severely hurting
performance. It is caused by dmu_zfetch() in case of misaligned
sequential accesses being called with overlap of one block.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Allan Jude <allanjude@freebsd.org>
Approved by: Gordon Ross <gwr@nexenta.com>
Author: Alexander Motin <mav@FreeBSD.org>
illumos/illumos-gate@4ae5f5f06chttps://www.illumos.org/issues/8652:
Clang and GCC prefer to use unsigned ints to store enums. With Clang, that
causes tautological comparison warnings when comparing a zfs_prop_t or
zpool_prop_t variable to the macro ZPROP_INVAL. It's likely that error
handling code is being silently removed as a result.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Igor Kozhukhov <igor@dilos.org>
Approved by: Gordon Ross <gwr@nexenta.com>
Author: Alan Somers <asomers@gmail.com>
illumos/illumos-gate@301fd1d6f2
Reviewed by: Alek Pinchuk <pinchuk.alek@gmail.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Gordon Ross <gwr@nexenta.com>
Author: Sean Eric Fagan <sef@ixsystems.com>
illumos/illumos-gate@01a059ee0chttps://www.illumos.org/issues/8856:
arc_cksum_is_equal() calls zio_push_transform() that requires abd_t*
(second arg), but a void* is passed.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Gordon Ross <gwr@nexenta.com>
Author: Roman Strashkin <roman.strashkin@nexenta.com>
8930 zfs_zinactive: do not remove the node if the filesystem is readonly
illumos/illumos-gate@93c618e0f4https://www.illumos.org/issues/8930:
We normally remove an unlinked node when its last user goes away and the
node becomes inactive. However, we should not do that if the filesystem
is mounted read-only including the case where it has its readonly
property set. The node will remain on the unlinked queue, so it will
not be leaked.
One particular scenario is when we receive an incremental stream into a
mounted read-only filesystem and that stream contains an unlinked file
(still on the unlinked queue). If that file is opened before the
receive and some time later after the receive it becomes inactive we
would remove it and, thus, modify the read-only filesystem. As a
result, the filesystem would diverge from its source and further
incremental receives would not be possible (without forcing a rollback).
Another related scenario, that may or may not be possible depending on an
OS / VFS policy, is when an open file is unlinked, then the filesystem is
remounted read-only, and then the file is closed.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Gordon Ross <gwr@nexenta.com>
Author: Andriy Gapon <avg@FreeBSD.org>
illumos/illumos-gate@94ddd0900ahttps://www.illumos.org/issues/8909:
There's a race condition that exists if `zil_free_lwb` races with either
`zil_commit_waiter_timeout` and/or `zil_lwb_flush_vdevs_done`.
Here's an example panic due to this bug:
> ::status
debugging crash dump vmcore.0 (64-bit) from ip-10-110-205-40
operating system: 5.11 dlpx-5.2.2.0_2017-12-04-17-28-32b6ba51fb (i86pc)
image uuid: 4af0edfb-e58e-6ed8-cafc-d3e9167c7513
panic message:
BAD TRAP: type=e (#pf Page fault) rp=ffffff0010555970 addr=60 occurred in mo
dule "zfs" due to a NULL pointer dereference
dump content: kernel pages only
> $c
zio_shrink+0x12()
zil_lwb_write_issue+0x30d(ffffff03dcd15cc0, ffffff03e0730e20)
zil_commit_waiter_timeout+0xa2(ffffff03dcd15cc0, ffffff03d97ffcf8)
zil_commit_waiter+0xf3(ffffff03dcd15cc0, ffffff03d97ffcf8)
zil_commit+0x80(ffffff03dcd15cc0, 9a9)
zfs_write+0xc34(ffffff03dc38b140, ffffff0010555e60, 40, ffffff03e00fb758, 0)
fop_write+0x5b(ffffff03dc38b140, ffffff0010555e60, 40, ffffff03e00fb758, 0)
write+0x250(42, fffffd7ff4832000, 2000)
sys_syscall+0x177()
If there's an outstanding lwb that's in `zil_commit_waiter_timeout`
waiting to timeout, waiting on it's waiter's CV, we must be sure not to
call `zil_free_lwb`. If we end up calling `zil_free_lwb`, then that LWB
may be freed and can result in a use-after-free situation where the
stale lwb pointer stored in the `zil_commit_waiter_t` structure of the
thread waiting on the waiter's CV is used.
A similar situation can occur if an lwb is issued to disk, and thus in
the `LWB_STATE_ISSUED` state, and `zil_free_lwb` is called while the
disk is servicing that lwb. In this situation, the lwb will be freed by
`zil_free_lwb`, which will result in a use-after-free situation when the
lwb's zio completes, and `zil_lwb_flush_vdevs_done` is called.
This race condition is prevented in `zil_close` by calling `zil_commit`
before `zil_free_lwb` is called, which will ensure all outstanding (i.e.
all lwb's in the `LWB_STATE_OPEN` and/or `LWB_STATE_ISSUED` states)
reach the `LWB_STATE_DONE` state before the lwb's are freed
(`zil_commit` will not return untill all the lwb's are
`LWB_STATE_DONE`).
Further, this race condition is prevented in `zil_sync` by only calling
`zil_free_lwb` for lwb's that do not have their `lwb_buf` pointer set.
All lwb's not in the `LWB_STATE_DONE` state will have a non-null value
for this pointer; the pointer is only cleared in
`zil_lwb_flush_vdevs_done`, at which point the lwb's state will be
changed to `LWB_STATE_DONE`.
This race is present in `zil_suspend`, leading to this bug.
At first glance, it would appear as though this would not be true
because `zil_suspend` will call `zil_commit`, just like `zil_close`, but
the problem is that `zil_suspend` will set the zilog's `zl_suspend`
field prior to calling `zil_commit`. Further, in `zil_commit`, if
`zl_suspend` is set, `zil_commit` will take a special branch of logic
and use `txg_wait_synced` instead of performing the normal `zil_commit`
logic.
This call to `txg_wait_synced` might be good enough for the data to
reach disk safely before it returns, but it does not ensure that all
outstanding lwb's reach the `LWB_STATE_DONE` state before it returns.
This is because, if there's an lwb "stuck" in
`zil_commit_waiter_timeout`, waiting for it's lwb to timeout, it will
maintain a non-null value for it's `lwb_buf` field and thus `zil_sync`
will not free that lwb. Thus, even though the lwb's data is already on
disk, the lwb will be left lingering, waiting on the CV, and will
eventually timeout and be issued to disk even though the write is
unnesseary.
So, after `zil_commit` is called from `zil_suspend`, we incorrectly
assume that there are not outstanding lwb's, and proceed to free all
lwb's found on the zilog's lwb list. As a result, we free the lwb that
will later be used `zil_commit_waiter_timeout`.
Reviewed by: John Kennedy <jwk404@gmail.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Brad Lewis <brad.lewis@delphix.com>
Reviewed by: Igor Kozhukhov <igor@dilos.org>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Prakash Surya <prakash.surya@delphix.com>
illumos/illumos-gate@cf07d3da99https://www.illumos.org/issues/8603:
To help make the ZIL's code more understandable, it was suggested that
the zilog_t's "zl_writer_lock" field should be renamed to "zl_issuer_lock".
Reviewed by: C Fraire <cfraire@me.com>
Approved by: Dan McDonald <danmcd@joyent.com>
Author: Prakash Surya <prakash.surya@delphix.com>
illumos/illumos-gate@a3b2868063https://www.illumos.org/issues/8677
We want to be able to run channel programs outside of synching context.
This would greatly improve performance of channel program that just gather
information, as we won't have to wait for synching context anymore.
This feature should introduce the following:
- A new command line flag in "zfs program" to specify our intention to
run in open context.
- A new flag/option within the channel program ioctl which selects the
context.
- Appropriate error handling whenever we try a channel program in
open-context that contains zfs.sync* expressions.
- Documentation for the new feature in the manual pages.
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Chris Williamson <chris.williamson@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Serapheim Dimitropoulos <serapheim@delphix.com>
Nowadays we do not pass zfs_cmd_t directly through the ioctl interface.
Instead a small zfs_iocparm_t object is passed and the command is
explicitly copied in and out. So, the check has become irrelevant.
MFC after: 3 weeks
Sponsored by: Panzura
These return the jail ID and jail name for the traced process,
respectively, and are analogous to "zonename" on Solaris/illumos.
"zonename" is now aliased to "jailname".
Also add some stress tests for the new variables.
Submitted by: Domagoj Stolfa <domagoj.stolfa@gmail.com>
Reviewed by: dteske (previous version)
MFC after: 2 weeks
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D13877
rather than kmem arena size to determine available memory.
Initialize the UMA limit to LONG_MAX to avoid spurious wakeups on boot before
the real limit is set.
PR: 224330 (partial), 224080
Reviewed by: markj, avg
Sponsored by: Netflix / Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D13494
r326987 enabled two #if 0'd-out EMLINK checks in zfs_link_create() for
link overflow. However, one of the checks (when the vnode adding a link
is a directory such as for mkdir) always returned even if the link did not
overflow. Change this to only return early if it needs to report an
EMLINK error.
Reported by: db, shurd
Sponsored by: Chelsio Communications
On the one hand, FIFOs should respect other variables not supported by
the fifofs vnode operation (such as _PC_NAME_MAX, _PC_LINK_MAX, etc.).
These values are fs-specific and must come from a fs-specific method.
On the other hand, filesystems that support FIFOs are required to
support _PC_PIPE_BUF on directory vnodes that can contain FIFOs.
Given this latter requirement, once the fs-specific VOP_PATHCONF
method supports _PC_PIPE_BUF for directories, it is also suitable for
FIFOs permitting a single VOP_PATHCONF method to be used for both
FIFOs and non-FIFOs.
To that end, retire all of the FIFO-specific pathconf methods from
filesystems and change FIFO-specific vnode operation switches to use
the existing fs-specific VOP_PATHCONF method. For fifofs, set it's
VOP_PATHCONF to VOP_PANIC since it should no longer be used.
While here, move _PC_PIPE_BUF handling out of vop_stdpathconf() so that
only filesystems supporting FIFOs will report a value. In addition,
only report a valid _PC_PIPE_BUF for directories and FIFOs.
Discussed with: bde
Reviewed by: kib (part of a larger patch)
MFC after: 1 month
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D12572
Having all filesystems fall through to default values isn't always correct
and these values can vary for different filesystem implementations. Most
of these changes just use the existing default values with a few exceptions:
- Don't report CHOWN_RESTRICTED for ZFS since it doesn't do the exact
permissions check this claims for chown().
- Use NANDFS_NAME_LEN for NAME_MAX for nandfs.
- Don't report a LINK_MAX of 0 on smbfs. Now fail with EINVAL to
indicate hard links aren't supported.
Requested by: bde (though perhaps not this exact implementation)
Reviewed by: kib (earlier version)
MFC after: 1 month
Sponsored by: Chelsio Communications
- Define a ZFS_LINK_MAX as the ZFS version of LINK_MAX which is set to
UINT64_MAX to match the on-disk format.
- Enable the currently #if 0'd code to check for link overflows and
return EMLINK.
- Don't clamp the link count reported in stat() to LINK_MAX as that is
still the 16-bit limit, but report the full link counts. Also,
avoid possibly overflowing the reported link count to 0 when adjusting
the link count to account for ".snapshot".
- Update the LINK_MAX reported by pathconf() to report ZFS_LINK_MAX
rather than LINK_MAX (but clamped to LONG_MAX for 32-bit systems).
Reviewed by: avg (earlier version)
Sponsored by: Chelsio Communications
dtrace_gethrtime() may be called outside of probe context, and in
particular, from the DTRACEIOC_BUFSNAP handler.
Disable interrupts rather than using sched_pin() to help ensure that
we don't call any external functions when in probe context.
PR: 218452
MFC after: 1 week
Otherwise a poorly timed lowmem event may attempt to acquire a destroyed
lock. Unregister the handler before destroying the ARC reclaim thread.
Reported by: gjb
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D13480
The DTrace fasttrap entry points expect a struct reg containing the
register values of the calling thread. Perform the conversion in
fasttrap rather than in the trap handler: this reduces the number of
ifdefs and avoids wasting stack space for traps that don't involve
DTrace.
MFC after: 2 weeks
Default WARNS to 0 still, since there's still some warnings on other
architectures.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D13301
"panic: vdev_geom_close_locked: cp->private is NULL"
This panic will result if ZFS fails to open a device due to either of the
following reasons:
1) The device's sector size is greater than 8KB.
2) ZFS wants to open the device RW, but it can't be opened for writing.
The solution is to change the initialization order to ensure that the
assertion will be satisfied.
PR: 221066
Reported by: David NewHamlet <wheelcomplex@gmail.com>
Reviewed by: avg
MFC after: 3 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D13278
"panic: vdev_geom_close_locked: cp->private is NULL"
This panic will result if ZFS fails to open a device due to either of the
following reasons:
1) The device's sector size is greater than 8KB.
2) ZFS wants to open the device RW, but it can't be opened for writing.
The solution is to change the initialization order to ensure that the
assertion will be satisfied.
PR: 221066
Reported by: David NewHamlet <wheelcomplex@gmail.com>
Reviewed by: avg
MFC after: 3 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D13278
We may create probes in the nascent child process, so we first need to
ensure that any inherited tracepoints are first removed. Otherwise the
probe sites will not be in the state expected by fasttrap, and it won't
be able to enable the probes.
MFC after: 2 weeks
The problem happens when the writes have offsets and sizes aligned with
a filesystem's recordsize (maximum block size). In this scenario
dmu_tx_assign() would fail because of being over the quota, but the uio
would already be modified in the code path where we copy data from the
uio into a borrowed ARC buffer. That makes an appearance of a partial
write, so zfs_write() would return success and the uio would be modified
consistently with writing a single block.
That bug can result in a data loss because the writes over the quota
would appear to succeed while the actual data is being discarded.
This commit fixes the bug by ensuring that the uio is not changed until
after all error checks are done. To achieve that the code now uses
uiocopy() + uioskip() as in the original illumos design. We can do that
now that uiocopy() has been updated in r326067 to use
vn_io_fault_uiomove().
Reported by: mav
Analyzed by: mav
Reviewed by: mav
Pointyhat to: avg (myself)
MFC after: 1 week
X-MFC after: r326067
X-Erratum: wanted
uiocopy() is currently unused, its purpose is copy data from a uio
without modifying the uio. It was in use before the vn_io_fault support
was added to ZFS, at which point our code diverged from the illumos code
a little bit. Because ZFS is the only (potential) user of the function
we are free to modify it to better suit ZFS needs.
The intention behind this change is to remove the differences introduced
earlier in zfs_write().
While here, re-implement uioskip() using uiomove() with
uio_segflg == UIO_NOCOPY.
The story of uioskip is the same as with uiocopy.
Reviewed by: mav
MFC after: 1 week
In general, higher-level code will atomically verify that the process
is not exiting and hold the process. In one case, we were using uwrite()
to copy a probed instruction to a per-thread scratch space block, but
copyout() can be used for this purpose instead; this change effectively
reverts r227291.
MFC after: 1 week
the ARC reclaim thread running longer than needed.
Update the arc::needfree dtrace probe triggered in arc_lowmem() to also report
the value we may want to free.
Submitted by: Nikita Kozlov <nikita.kozlov at blade-group.com>
Reviewed by: avg
Approved by: avg
MFC after: 3 weeks
Sponsored by: blade
Differential Revision: https://reviews.freebsd.org/D12163
illumos/illumos-gate@27295216542729521654https://www.illumos.org/issues/7531
I found that some buffers that could be L2ARC eligible are not flagged
such, leading to some performance impact. As a test I ran the same IO
workload 10 times in a raw. It is a metadata only workload (files
listing). l2arc_noprefetch=0.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Approved by: Dan McDonald <danmcd@joyent.com>
Author: benrubson <ben.rubson@gmail.com>
MFC after: 8 days
illumos/illumos-gate@f37ae9a714f37ae9a714https://www.illumos.org/issues/8713
If we're creating a pool with version >= SPA_VERSION_DSL_SCRUB (v11) we need to
account for additional space needed by the origin dataset which will also be
snapshotted: "poolname"+"/"+"$ORIGIN"+"@"+"$ORIGIN".
Enforce this limit in pool_namecheck().
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Dan McDonald <danmcd@joyent.com>
Author: loli10K <ezomori.nozomu@gmail.com>
MFC after: 1 week
The generic (naive) implementation of posix_fallocate cannot provide the
standard mandated guarantee that overwrites would never fail due to the lack
of free space. The fundamental reason is the copy-on-write architecture
of ZFS. Other features like compression and deduplication can also
increase the size difference between the (pre-)allocated dummy content
and the future content.
So, until ZFS can properly implement the feature it's better to report
that it is unsupported rather than providing an ersatz implementation.
Please note that EINVAL is used to report that the underlying file system
does not support the operation (POSIX.1-2008).
illumos and ZoL seem to do the same.
MFC after: 3 weeks
Sponsored by: Panzura
If vdev_geom_close doesn't close the consumer, then the subsequent call
to vdev_geom_open() would be just a NOP and would always return success.
Thus, at present vdev_reopen() would always succeed for vdev_geom devices
even if the underlying provider is in error state.
The problem was introduced as a result of an optimization in rS308055.
The most significant manifistation of the problem is that
zio_vdev_io_done() --> vdev_probe() --> SPA_ASYNC_PROBE -->
spa_async_probe() --> vdev_reopen()
chain of calls and events becomes a NOP as well.
This chain is invoked when zio_vdev_io_done() detects an "unexpected"
error from the lower level I/O.
Additionally, that call path may race with SPA_ASYNC_REMOVE path because
of the asynchronous nature of them both. So, the SPA_ASYNC_PROBE may
erroneously mark a vdev as being healthy after SPA_ASYNC_REMOVE marked
it as removed.
Reviewed by: asomers, mav
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D12731
Don't check for SPA_MINDEVSIZE in vdev_geom_attach when opening by path.
It's redundant with the check in vdev_open, and failing to attach here
results in the wrong error message being printed. However, still check for
it in some other situations:
* When opening by guids, so we don't get bogged down reading from slow
devices like floppy drives.
* In vdev_geom_read_pool_label for the same reason, because we iterate over
all providers.
* If the caller requests that we verify the guid, because then we'll have to
read from the device before vdev_open verifies the size.
PR: 222227
Reported by: Marie Helene Kvello-Aune <marieheleneka@gmail.com>
Reviewed by: avg, mav
MFC after: 3 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D12531
Unlike spa_async_thread that can get started only from spa_sync()
spa_async_thread_vd can get started from other contexts.
Additionally, spa_async_thread_vd does not really depend on
spa sync being enabled.
The incorrect assert could be triggered by importing a pool in the
read-only mode and then disconnecting one of its disks.
In this case spa_sync_on was false because the pool was read-only
and spa_async_thread_vd was started to handle SPA_ASYNC_REMOVE event.
Note: spa_async_thread_vd() currently exists only in FreeBSD, it was
split out of spa_async_thread() in r253990.
Discussed with: mav
MFC after: 2 weeks
illumos/illumos-gate@4923c69fdd4923c69fdd
FreeBSD note: the manual page is to be updated separately.
https://www.illumos.org/issues/8067
Add an option to zdb to print a literal embedded block pointer supplied on the
command line:
zdb -E [-A] word0:word1:...:word15
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Alex Reece <alex@delphix.com>
Reviewed by: Yuri Pankov <yuri.pankov@gmail.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Matthew Ahrens <mahrens@delphix.com>
MFC after: 3 weeks
Zero, <TYPE>_MIN and <TYPE>_MAX values can result from valid conversions.
They don't necessarily imply any error.
Since we do not have any reliable error signaling from libkern's strto*(),
it's better to always assume success rather than to report an error when
there is none.
Reviewed by: tsoome
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D12565
illumos/illumos-gate@2840dce1a02840dce1a0https://www.illumos.org/issues/8600
ZFS channel programs should be able to create snapshots.
In addition to the base snapshot functionality, this will likely entail adding
extra logic to handle edge cases which were formerly not possible, such as
creating then destroying a snapshot in the same transaction sync.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Brad Lewis <brad.lewis@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Chris Williamson <chris.williamson@delphix.com>
MFC after: 5 weeks
X-MFC after: r324163
illumos/illumos-gate@000cce6b6f000cce6b6fhttps://www.illumos.org/issues/8592
ZFS channel programs should be able to perform a rollback. This logic will
probably look pretty similar to zfs.sync.destroy().
Reviewed by: Chris Williamson <chris.williamson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Brad Lewis <brad.lewis@delphix.com>
MFC after: 5 weeks
X-MFC after: r324163
illumos/illumos-gate@ed992b0aaced992b0aachttps://www.illumos.org/issues/8604
Every time we want to unmount a snapshot (happens during snapshot deletion or
renaming) we unnecessarily iterate through all the mountpoints in the VFS layer
(see zfs_get_vfs).
Ideally we would just put a hold on the snapshot and access its respective VFS
resource directly.
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Andy Stormont <astormont@racktopsystems.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Serapheim Dimitropoulos <serapheim@delphix.com>
FreeBSD note: I added a FreeBSD specific function getzfsvfs_ref() which
is like getzfsvfs() but returns a filesystem referenced, not busied.
We want a busied filesystem in most cases, because we access its private
data and, thus, we need to prevent the filesystem from being unmounted
and its private data destroyed. But in some cases we can either get
away with just a referenced filesystem or we must not busy the
filesystem. Unmounting the filesystem is one of such cases.
MFC after: 5 weeks
X-MFC after: r324163
illumos/illumos-gate@5f39f884e25f39f884e2https://www.illumos.org/issues/8605
zfs.exists() in channel programs doesn't return any result, and should have a
man page entry.
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Chris Williamson <chris.williamson@delphix.com>
MFC after: 5 weeks
X-MFC after: r324163
7431 ZFS Channel Programs
illumos/illumos-gate@dfc115332cdfc115332chttps://www.illumos.org/issues/7431
ZFS channel programs (ZCP) adds support for performing compound ZFS
administrative actions via Lua scripts in a sandboxed environment (with time
and memory limits).
This initial commit includes both base support for running ZCP scripts, and a
small initial library of API calls which support getting properties and
listing, destroying, and promoting datasets.
Testing: in addition to the included unit tests, channel programs have been in
use at Delphix for several months for batch destroying filesystems. The
dsl_destroy_snaps_nvl() call has also been replaced with
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Approved by: Garrett D'Amore <garrett@damore.org>
Author: Chris Williamson <chris.williamson@delphix.com>
8552 ZFS LUA code uses floating point math
illumos/illumos-gate@916c8d8811916c8d8811https://www.illumos.org/issues/8552
In the LUA interpreter used by "zfs program", the lua format() function
accidentally includes support for '%f' and friends, which can cause compilation
problems when building on platforms that don't support floating-point math in
the kernel (e.g. sparc). Support for '%f' friends (%f %e %E %g %G) should be
removed, since there's no way to supply a floating-point value anyway (all
numbers in ZFS LUA are int64_t's).
Reviewed by: Yuri Pankov <yuripv@gmx.com>
Reviewed by: Igor Kozhukhov <igor@dilos.org>
Approved by: Dan McDonald <danmcd@joyent.com>
Author: Matthew Ahrens <mahrens@delphix.com>
8590 memory leak in dsl_destroy_snapshots_nvl()
illumos/illumos-gate@e6ab4525d1e6ab4525d1https://www.illumos.org/issues/8590
In dsl_destroy_snapshots_nvl(), "snaps_normalized" is not freed after it is
added to "arg".
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Steve Gonczi <steve.gonczi@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Dan McDonald <danmcd@joyent.com>
Author: Matthew Ahrens <mahrens@delphix.com>
FreeBSD notes:
- zfs-program.8 manual page is taken almost as is from the vendor repository,
no FreeBSD-ification done
- fixed multiple instances of NULL being used where an integer is expected
- replaced ETIME and ECHRNG with ETIMEDOUT and EDOM respectively
This commit adds a modified version of Lua 5.2.4 under
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/lua, mirroring the
upstream. See README.zfs in that directory for the description of Lua
customizations.
See zfs-program.8 on how to use the new feature.
MFC after: 5 weeks
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D12528
I managed to commit an older version of the change.
Plus, even the latest version was not ready for userland compilation.
Reported by: "O. Hartmann" <ohartmann@walstatt.org>,
cy
MFC after: 1 week
X-MFC with: r324011
FreeBSD notes:
- this MFV reverts FreeBSD commit r314549 to make the merge easier
- at present our emulation of cv_timedwait_hires is rather poor,
so I elected to use cv_timedwait_sbt directly
Please see the differential revision for details.
Unfortunately, I did not get any positive reviews, so there could be
bugs in the FreeBSD-specific piece of the merge.
Hence, the long MFC timeout.
illumos/illumos-gate@1271e4b10d1271e4b10dhttps://www.illumos.org/issues/8585
The current implementation of zil_commit() can introduce significant
latency, beyond what is inherent due to the latency of the underlying
storage. The additional latency comes from two main problems:
1. When there's outstanding ZIL blocks being written (i.e. there's
already a "writer thread" in progress), then any new calls to
zil_commit() will block waiting for the currently oustanding ZIL
blocks to complete. The blocks written for each "writer thread" is
coined a "batch", and there can only ever be a single "batch" being
written at a time. When a batch is being written, any new ZIL
transactions will have to wait for the next batch to be written,
which won't occur until the current batch finishes.
As a result, the underlying storage may not be used as efficiently
as possible. While "new" threads enter zil_commit() and are blocked
waiting for the next batch, it's possible that the underlying
storage isn't fully utilized by the current batch of ZIL blocks. In
that case, it'd be better to allow these new threads to generate
(and issue) a new ZIL block, such that it could be serviced by the
underlying storage concurrently with the other ZIL blocks that are
being serviced.
2. Any call to zil_commit() must wait for all ZIL blocks in its "batch"
to complete, prior to zil_commit() returning. The size of any given
batch is proportional to the number of ZIL transaction in the queue
at the time that the batch starts processing the queue; which
doesn't occur until the previous batch completes. Thus, if there's a
lot of transactions in the queue, the batch could be composed of
many ZIL blocks, and each call to zil_commit() will have to wait for
all of these writes to complete (even if the thread calling
zil_commit() only cared about one of the transactions in the batch).
Reviewed by: Brad Lewis <brad.lewis@delphix.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Dan McDonald <danmcd@joyent.com>
Author: Prakash Surya <prakash.surya@delphix.com>
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D12355
illumos/illumos-gate@42b141117242b1411172https://www.illumos.org/issues/8648
I'm opening this bug to track integration of the following ZFS on Linux
commit into illumos:
commit f763c3d1df
Author: LOLi <loli10K@users.noreply.github.com>
Date: Mon Aug 21 17:59:48 2017 +0200
Fix range locking in ZIL commit codepath
Since OpenZFS 7578 (1b7c1e5) if we have a ZVOL with logbias=throughput
we will force WR_INDIRECT itxs in zvol_log_write() setting itx->itx_lr
offset and length to the offset and length of the BIO from
zvol_write()->zvol_log_write(): these offset and length are later used
to take a range lock in zillog->zl_get_data function: zvol_get_data().
Now suppose we have a ZVOL with blocksize=8K and push 4K writes to
offset 0: we will only be range-locking 0-4096. This means the
ASSERTion we make in dbuf_unoverride() is no longer valid because now
dmu_sync() is called from zilog's get_data functions holding a partial
lock on the dbuf.
Fix this by taking a range lock on the whole block in zvol_get_data().
Reviewed-by: Chunwei Chen <tuxoko@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Reviewed by: Igor Kozhukhov <igor@dilos.org>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Andriy Gapon <avg@FreeBSD.org>
Reviewed by: Alexander Motin <mav@FreeBSD.org>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: LOLi <loli10K@users.noreply.github.com>
MFC after: 10 days
illumos/illumos-gate@bd9d3f9046bd9d3f9046https://www.illumos.org/issues/8661
The "zil-cw1" dtrace probe was previously removed in 8558, and the "zil-cw2"
probe should have been removed in that patch as well. Unfortunately, the "zil-
cw2" was not removed in 8558, so this bug is to track it's removal.
Reviewed by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Igor Kozhukhov <igor@dilos.org>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Prakash Surya <prakash.surya@delphix.com>
MFC after: 1 week
illumos/illumos-gate@554675eee7554675eee7https://www.illumos.org/issues/8473
Scrubbing is supposed to detect and repair all errors in the pool. However,
it wrongly ignores active spare devices. The problem can easily be
reproduced in OpenZFS at git rev 0ef125d with these commands:
truncate -s 64m /tmp/a /tmp/b /tmp/c
sudo zpool create testpool mirror /tmp/a /tmp/b spare /tmp/c
sudo zpool replace testpool /tmp/a /tmp/c
/bin/dd if=/dev/zero bs=1024k count=63 oseek=1 conv=notrunc of=/tmp/c
sync
sudo zpool scrub testpool
zpool status testpool # Will show 0 errors, which is wrong
sudo zpool offline testpool /tmp/a
sudo zpool scrub testpool
zpool status testpool # Will show errors on /tmp/c,
# which should've already been fixed
FreeBSD head is partially affected: the first scrub will detect some errors, but the second scrub will detect more.
Reviewed by: Andy Stormont <astormont@racktopsystems.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
MFC after: 1 week
Sponsored by: Spectra Logic Corp
It is reported that the default value of 4KB results in a substantial
memory use overhead (at least, on some configurations). Using 1KB seems
to reduce the overhead significantly.
PR: 222377
Reported by: Sean Chittenden <sean@chittenden.org>
MFC after: 1 week
I overlooked the fact that that ZIO_IOCTL_PIPELINE does not include
ZIO_STAGE_VDEV_IO_DONE stage. We do allocate a struct bio for an ioctl
zio (a disk cache flush), but we never freed it.
This change splits bio handling into two groups, one for normal
read/write i/o that passes data around and, thus, needs the abd data
tranform; the other group is for "data-less" i/o such as trim and cache
flush.
PR: 222288
Reported by: Dan Nelson <dnelson@allantgroup.com>
Tested by: Borja Marcos <borjam@sarenet.es>
MFC after: 10 days
illumos/illumos-gate@2bcb5458542bcb545854https://www.illumos.org/issues/8602
When I landed the fix for 8558, I incorrectly added the "dp_early_sync_tasks"
field to the "dsl_pool" structure. This field is used in DelphixOS, but not in
illumos. It was incorrectly pulled into illumos, so this bug is to remove it
from the structure.
Reviewed by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Prakash Surya <prakash.surya@delphix.com>
MFC after: 1 week
As long as mnt_ref is not zero there can be a consumer that might try
to access mnt_vnodecovered. For this reason the covered vnode must not
be freed until mnt_ref goes to zero.
So, move the release of the covered vnode to vfs_mount_destroy.
Reviewed by: kib
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D12329
The zfsonlinux feature large_dnode is not yet supported by the loader.
Reviewed by: avg, allanjude
Differential Revision: https://reviews.freebsd.org/D12288
The uncovered vnode is possible because there is no guarantee that
its hold count would go to zero (and it would be inactivated and reclaimed)
immediately after a covering filesystem is unmounted.
So, such a vnode should be expected and it is possible to re-use it
without any trouble.
MFC after: 3 weeks
Sponsored by: Panzura
The only consumer of zfs_get_vfs, zfs_unmount_snap, does not need
the filesystem to be busy, it just need a reference that it can pass
to dounmount.
Also, previously the code was racy as it unbusied the filesystem
before taking a reference on it.
Now the code should be simpler and safer.
MFC after: 2 weeks
Sponsored by: Panzura
illumos/illumos-gate@37e84ab74e37e84ab74ehttps://www.illumos.org/issues/8569
C [C99] has peculiar rules for inline functions that are different from the
C++ rules. Unlike C++ where inline is "fire and forget", in C a programmer
must pay attention to the function's storage class / visibility. The main
problem is with the case where a compiler decides to not inline a call to the
function declared as inline.
Some relevant links:
- http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.faqs/ka15831.html
- http://www.drdobbs.com/the-new-c-inline-functions/184401540
The summary is that either the inline functions should be declared 'static
inline' or one of the compilation units (.c files) must provide a callable
externally visible function definition. In the former case, the compiler would
automatically create a local non-inlined function instance in every compilation
unit where it's needed. In the latter case the single external definition is
used to satisfy any non-inlined calls in all compilation units. As things
stand right now, we can get an undefined reference error under certain
combinations of compilers and compiler options. For example, this is what I
get on FreeBSD when compiling with clang 4.0.0 and -O1:
In function `abd_free': /usr/src/sys/cddl/contrib/opensolaris/uts/common/fs/zfs/abd.c:385:
undefined reference to `abd_is_linear'
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Andriy Gapon <avg@FreeBSD.org>
MFC after: 1 week
illumos/illumos-gate@216d7723a1216d7723a1https://www.illumos.org/issues/8558
On a system with more than 80K ZFS filesystems, we've seen cases where
lwp_create() will start to fail by returning EAGAIN. The problem being,
for each of those 80K ZFS filesystems, a taskq will be created for each
dataset as part of the ZIL for each dataset.
For each of these taskq's, a kernel thread will be created which results
in 24KB being allocated for each thread. With enough of these 24KB
allocations, we eventually exhaust the memory region set aside for these
allocations. Currently, segkpsize is set to a value of 2GB, which means
we can only support about 80K filesystems; 2GB / 24KB = ~80K.
The lwp_create() failure comes into play due to the fact that LWP
creation also allocates 24KB from this same region of memory. Thus, if
we've exhausted this region of memory due to the number of ZIL taskq's,
there won't be any memory avaible to allow the call to lwp_create() to
succeed.
FreeBSD note: I haven't created sysctl-s for the new ZIL clean
parameters. Let's add them if anyone requires to tune them.
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Sebastien Roy <sebastien.roy@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Prakash Surya <prakash.surya@delphix.com>
MFC after: 3 weeks
illumos/illumos-gate@1702cce7511702cce751
FreeBSD note: rather than merging the zpool.8 update I copied the zpool
scrub section from the illumos zpool.1m to FreeBSD zpool.8 almost
verbatim. Now that the illumos page uses the mdoc format, it was an
easier option. Perhaps the change is not in perfect compliance with the
FreeBSD style, but I think that it is acceptible.
https://www.illumos.org/issues/8414
This issue tracks the port of scrub pause from ZoL: https://github.com/zfsonlinux/zfs/pull/6167
Currently, there is no way to pause a scrub. Pausing may be useful when
the pool is busy with other I/O to preserve bandwidth.
Description
This patch adds the ability to pause and resume scrubbing. This is achieved
by maintaining a persistent on-disk scrub state. While the state is 'paused'
we do not scrub any more blocks. We do however perform regular scan
housekeeping such as freeing async destroyed and deadlist blocks while paused.
Motivation and Context
Scrub pausing can be an I/O intensive operation and people have been asking
for the ability to pause a scrub for a while. This allows one to preserve scrub
progress while freeing up bandwidth for other I/O.
Reviewed by: George Melikov <mail@gmelikov.ru>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Brad Lewis <brad.lewis@delphix.com>
Reviewed by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Approved by: Dan McDonald <danmcd@joyent.com>
Author: Alek Pinchuk <apinchuk@datto.com>
MFC after: 2 weeks
Turn on the required options in the ERL config file, and ensure
that the fbt module is listed as a dependency for mips in
the modules/dtrace/dtraceall/dtraceall.c file.
PR: 220346
Reviewed by: gnn, markj
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D12227
"zfs mount -o" passes a list of mount options directly to nmount(2) after
sanity checking them. In particular, zfs(8) will refuse to mount an already
existing file system unless "remount" is specified in the option list.
However, the "remount" option only exists in Illumos. FreeBSD's equivalent is
"update".
PR: 221985
Reviewed by: avg
MFC after: 3 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D12233
The default value for arc_no_grow_shift may not be optimal when using
several GiB ARC. Expose it via sysctl allows users to tune it easily.
Also expose arc_grow_retry via sysctl for the same reason. The default value of
60s might, in case of intensive load, be too long.
Submitted by: Nikita Kozlov <nikita.kozlov@blade-group.com>
Reviewed by: mav, manu, bapt
MFC after: 2 weeks
Sponsored by: blade
Differential Revision: https://reviews.freebsd.org/D12144
