The I/OAT HW reset process may sleep, so it is invalid to perform a
channel reset from the software interrupt thread.
Sponsored by: EMC / Isilon Storage Division
supported, use full-width aliases MSRs for writes. This fixes the
"[pmc,X] negative increment" assertion on the context switch when
clipped counter value is sign-extended.
Add definitions for the MSR IA32_PERF_CAPABILITIES needed to detect
the feature.
PR: 207068
Submitted by: joss.upton@yahoo.com
MFC after: 2 weeks
nvme(4) issues a SET_NUM_QUEUES command during device
initialization to ensure enough I/O queues exists for each
of the MSI-X vectors we have allocated. The SET_NUM_QUEUES
command is then issued again during nvme_ctrlr_start(), to
ensure that is properly set after any controller reset.
At least one NVMe drive exists which fails this second
SET_NUM_QUEUES command during device initialization. So
change nvme_ctrlr_start() to only issue its SET_NUM_QUEUES
command when it is coming out of a reset - avoiding the
duplicate SET_NUM_QUEUES during device initialization.
Reported by: gallatin
MFC after: 3 days
Sponsored by: Intel
xn_ifp is allocated in create_netdev with if_alloc(IFT_ETHER).
According to the current arrangement it can't be NULL.
Coverity ID: 1349805
Submitted by: Wei Liu <wei.liu2@citrix.com>
Reviewed by: royger
Sponsored by: Citrix Systems R&D
Differential revision: https://reviews.freebsd.org/D5252
The variable error is assigned to 0 before entering the switch.
Assigning error to 0 before break pointless rewrites the real error
value that should be returned.
Coverity ID: 1304974
Submitted by: Wei Liu <wei.liu2@citrix.com>
Reviewed by: royger
Sponsored by: Citrix Systems R&D
Differential revision: https://reviews.freebsd.org/D5250
Replace the hw.ntb.enable_writecombine tunable with
hw.ntb.default_mw_pat. It can be set with several specific numerical
values to select a caching type. Any bogus value is treated as
Uncacheable (UC).
The ntb_mw_set_wc() KPI has removed the restriction that the selected
mode must be one of UC, WC, or WB.
Sponsored by: EMC / Isilon Storage Division
The IOCTL is used by 'ifconfig -v' to show SFP+/QSFP+ information
including inventory information and dianostics (temperature, light
levels, voltage etc).
Reviewed by: gnn,melifaro
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D5240
made writeable by the root user. Userspace audio daemons can add or
update an entry in /dev/sndstat by doing a single system write call to
any /dev/sndstat file descriptor handle. When the audio daemon closes the
file handle or is killed the entry disappears.
While at it, cleanup the sound status code a bit:
- keep the device list sorted to avoid sorting the list every time a
/dev/sndstat read request is made.
- factor out locking into a pair of locking macros.
- use the sound status lock to protect all per file handle states,
when generating the output for /dev/sndstat and when removing or
adding sound status devices. This way sndstat_acquire() and
sndstat_release() become superfluous and can be removed.
Reviewed by: mav @
Differential Revision: https://reviews.freebsd.org/D5191
Currently, there is no easy way to know in advance how many entries a list parsed by
ofw_bus_parse_xref_list_alloc() in sys/dev/ofw/ofw_bus_subr.c has.
This patch:
* teaches the existing function about handling idx == -1 and returning how big
the set is; then renames it as _internal;
* create a new function that asserts idx != -1, so the old API is maintained;
* add a new function that returns just the list length.
Submitted by: Stanislav Galabov <sgalabov@gmail.com>
Differential Revision: https://reviews.freebsd.org/D5043
when its result is immediately ignored, i.e. for kernel processes
forked from the user process. Do not test for non-null before freeing
string.
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Major changes:
- Add i219/i219(2) hardware support. (Found on Skylake generation and newer
chipsets.)
- Further to the last Skylake support diff, this one also includes support for
the Lewisburg chipset (i219(3)).
- Add a workaround to an igb hardware errata.
All 1G server products need to have IPv6 extension header parsing turned off.
This should be listed in the specification updates for current 1G server
products, e.g. for i350 it's errata #37 in this document:
http://www.intel.com/content/dam/www/public/us/en/documents/specification-updates/ethernet-controller-i350-spec-update.pdf
- Avoton (i354) PHY errata workaround added
And a bunch of minor fixes, as well as #defines for things that the current
em(4)/igb(4) drivers don't implement.
Differential Revision: https://reviews.freebsd.org/D3162
Reviewed by: sbruno, marius, gnn
Approved by: gnn
MFC after: 2 weeks
Sponsored by: Intel Corporation
We will eventually convert them to use busdma.
Submitted by: Jun Su <junsu microsoft com>
Reviewed by: adrian, sephe, Dexuan Cui <decui microsoft com>
Approved by: adrian (mentor)
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D5087
And convert rndis non-hot path spinlock to mutex.
Submitted by: Jun Su <junsu microsoft com>
Reviewed by: adrian, sephe
Approved by: adrian (mentor)
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D5081
HyperV code was ported from Linux. There is an implementation of
work queue called hv_work_queue. In FreeBSD, taskqueue could be
used for the same purpose. Convert all the consumer of hv_work_queue
to use taskqueue, and remove work queue implementation.
Submitted by: Jun Su <junsu microsoft com>
Reviewed by: adrian, Hongjiang Zhang <honzhan microsoft com>
Approved by: adrian (mentor)
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D4963
It is off by default. This eases more experiment on hn(4).
Reviewed by: adrian, Hongjiang Zhang <honzhan microsoft com>
Approved by: adrian (mentor)
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D5175
This significantly increases LRO aggregation ratio when there are
large amount of connections (improves reception performance a lot).
Reviewed by: adrian
Approved by: adrian (mentor)
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D5167
hn(4) only has one RX ring currently, so default 8 LRO entries
are too small.
Reviewed by: adrian
Approved by: adrian (mentor)
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D5166
We lost half of the chimney sending space, because we mis-used
ffs() on a 64 bits mask, where ffsl() should be used.
While I'm here:
- Use system atomic operation instead.
- Stringent chimney sending index assertion.
Reviewed by: adrian
Approved by: adrian (mentor)
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D5159
It will be shared w/ upcoming ifnet.if_transmit implementaion.
No functional changes.
Reviewed by: adrian
Approved by: adrian (mentor)
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D5158
So that:
- TCP/IP stack will not do unnecessary IP header checksum for TSO
packets.
- Reduce guest load for non-TSO IP packets.
Reviewed by: adrian
Approved by: adrian (mentor)
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D5099
- For non-TSO offloading, we don't need to access mbuf to know
which csum offloading is requested, we can just use the
CSUM_{IP,TCP,UDP} in the csum_flags.
- For TSO offloading, we still can depend on CSUM_{TSO4,TSO6}
in the csum_flags to tell whether the TSO packet is an IPv4
TSO packet or an IPv6 TSO packet.
This streamlines csum offloading handling (remove the two goto)
and allows us the nuke the unnecessary get_transport_proto_type().
Reviewed by: adrian, Hongjiang Zhang <honzhan microsoft com>
Approved by: adrian (mentor)
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D5098
- Record csum features in softc, so we don't need to duplicate the
logic from attach path to ioctl path.
- Protect if_capenable and if_hwassist changes by main lock.
- Prefer turn on/off bits in if_hwassist explicitly instead of using
XOR.
Reviewed by: adrian, Hongjiang Zhang <honzhan microsoft com>
Approved by: adrian (mentor)
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D5085
a mips big-endian board.
This is (hopefully! ish!) a temporary change until a slightly better way
can be found to express this without a config option.
Tested:
* BUFFALO WZR-HP-G300NH 1stGen (by submitter)
Submitted by: Mori Hiroki <yamori813@yahoo.co.jp>
Add #defines for ATA_WRITE_UNCORRECTABLE48 and its features. Update the
decoding in ATACAM to recognize the new values. Also improve command
decoding for a few other commands (SMART, NOP, SET_FEATURES). Bring the
decoding in ata(4) up to parity with ATACAM.
Reviewed by: mav, imp
MFC after: 1 month
Sponsored by: Panasas, Inc.
Differential Revision: https://reviews.freebsd.org/D5181
also for 82598, which doesn't support it.
The legacy code has a check for it, which was missed when the code for dealing with
CSUM_IP6_* was added. Add the same check for FreeBSD 10 and higher.
Differential Revision: https://reviews.freebsd.org/D5192
MD_ROOT_SIZE and embed_mfs.sh were basically retired as part of
https://reviews.freebsd.org/D2903 .
However, when building a kernel with 'options MD_ROOT_SIZE' specified, this
results in a non-working MFS, as within sys/dev/md/md.c we fall within the
wrong # ifdef.
This patch implements the following:
* Allow kernels to be built without the MD_ROOT_SIZE option, which results
in a kernel built as per D2903.
* Allow kernels to be built with the MD_ROOT_SIZE option, which results
in a kernel built similarly to the pre-D2903 way, with the following
differences:
* The MFS is now put in a separate section within the kernel (oldmfs,
so it differs from the mfs section introduced by D2903).
* embed_mfs.sh is changed, so it looks up the oldmfs section within the
kernel, gets its size and offset, sees if the MFS will fit within the
allocated oldmfs section and only if all is well does a dd of the MFS
image into the kernel.
Submitted by: Stanislav Galabov <sgalabov@gmail.com>
Reviewed by: brooks, imp
Differential Revision: https://reviews.freebsd.org/D5093
causes watchdog timeouts when using TSO4 at link speeds below
Gigabit, at least with 82573E. So disable the assist automatically
when at lower speeds.
Submitted by: jfv
Approved by: erj
Obtained from: D3162
MFC after: 3 days
Fix ixgbe reporting of flow control autoneg when running under DBG 1
Reviewed by: erj
MFC after: 2 days
Sponsored by: Multiplay
Differential Revision: https://reviews.freebsd.org/D5089
Setup phy and gbic power as per Linux 4.3.13 driver.
This fixes link not detected on X540-AT2 after booting to Linux which turns
the phy power off on detach.
Reviewed by: sbruno
MFC after: 2 days
Sponsored by: Multiplay
Differential Revision: https://reviews.freebsd.org/D5107
Fix the inverted set of interrupts being used as the mask for ixl.
Without this ixl devices fail to detect link state changes.
Reviewed by: erj, sbruno
MFC after: 2 days
Sponsored by: Multiplay
This is the final step required allowing to compile and to run RISC-V
kernel and userland from HEAD.
RISC-V is a completely open ISA that is freely available to academia
and industry.
Thanks to all the people involved! Special thanks to Andrew Turner,
David Chisnall, Ed Maste, Konstantin Belousov, John Baldwin and
Arun Thomas for their help.
Thanks to Robert Watson for organizing this project.
This project sponsored by UK Higher Education Innovation Fund (HEIF5) and
DARPA CTSRD project at the University of Cambridge Computer Laboratory.
FreeBSD/RISC-V project home: https://wiki.freebsd.org/riscv
Reviewed by: andrew, emaste, kib
Relnotes: Yes
Sponsored by: DARPA, AFRL
Sponsored by: HEIF5
Differential Revision: https://reviews.freebsd.org/D4982
The process is not held since the process_exit hook is called after the
exithold. There is no need to hold the process since the hook will
always see it exiting via the process_exit event.
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
The NVMe specification does not define a maximum or optimal delete
size, so technically max delete size is min(full size of namespace,
2^32 - 1 LBAs). A single delete operation for a multi-TB NVMe
namespace though may take much longer to complete than the nvme(4)
I/O timeout period. So choose a sensible default here that is still
suitably large to minimize the number of overall delete operations.
This also fixes possible uint32_t overflow on initial TRIM operation
for zpool create operations for NVMe namespaces with >4G LBAs.
MFC after: 3 days
Sponsored by: Intel
ofw_bus_get_node() must be tested against negative values since
missing parent bus method will result in calling the default method
which simply returns (-1): sys/dev/ofw/ofw_bus_if.m
This was lost in the review process.
Obtained from: Semihalf
Sponsored by: Cavium
Some firmware revisions provide different DTB tree that include
odd MDIO placement in the tree.
This commit adds support for 2 new buses:
- MRML bridge (PCIB subordinate)
- MDIO nexus (MRML subordinate)
This allows for the correct MDIO attachment with both - new and old
firmware.
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D5070
Search for BGX node in DTS in two ways:
1. Try to find it uder root node first
2. If not found under root, find the top level PCI bridge node
and search all nodes below it until appropriate BGX node is found.
Move search code to another function to make the code more clear.
Remove unused variable by the way.
Reviewed by: wma
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D5066
Use driver settable callbacks for handling of:
- core post reset
- reading actual port speed
Typically, OTG enabled EHCI cores wants setting of USBMODE register,
but this register is not defined in EHCI specification and different
cores can have it on different offset.
Also, for cores with TT extension, actual port speed must be determinable.
But again, EHCI specification not covers this so this patch provides
function for two most common variant of speed bits layout.
Reviewed by: hselasky
Differential Revision: https://reviews.freebsd.org/D5088
This fixes some cases where a process could exit without being untracked
by filemon.
Reported by: mjg
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
It only prints the header from filemon_ioctl. Keep the name though to stay
closer to other implementations.
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
to be 64-bit on 32-bit architectures. It is not uncommon for device trees
to use the upper 32-bits to store what effectively is an index into the
parent ranges property. In this case, when running with a 32-bit bus_addr_t
and bus_size_t, we would previously truncate the address, this may then
incorrectly match the wrong range, and return the wrong address.
Tested by: bz (earlier version)
- Use taskqueue instead of swi for event handling.
- Scan the interrupt flags in filter
- Disable ringbuffer interrupt mask in filter to ensure no unnecessary
interrupts.
Submitted by: Jun Su <junsu microsoft com>
Reviewed by: adrian, sephe, Dexuan <decui microsoft com>
Approved by: adrian (mentor)
MFC after: 2 weeks
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D4920
Summary:
Migrate to using the semi-opaque type rman_res_t to specify rman resources. For
now, this is still compatible with u_long.
This is step one in migrating rman to use uintmax_t for resources instead of
u_long.
Going forward, this could feasibly be used to specify architecture-specific
definitions of resource ranges, rather than baking a specific integer type into
the API.
This change has been broken out to facilitate MFC'ing drivers back to 10 without
breaking ABI.
Reviewed By: jhb
Sponsored by: Alex Perez/Inertial Computing
Differential Revision: https://reviews.freebsd.org/D5075
- Start vap(s) (via ieee80211_start_all()) only when initialization
succeeds; stop the first vap otherwise (via ieee80211_stop());
- Do not try to stop a device multiple times
(move (sc->sc_flags & RTWN_RUNNING) check to urtwn_stop_locked()).
Tested by: kevlo
Reviewed by: kevlo
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D5058
Added hw.ix.flow_control which enables the default flow_control of all ix
interfaces to be set in loader.conf.
Added hw.ix.advertise_speed which enables the default advertised_speed of
all ix interfaces to be set in loader.conf.
Made enable_aim device independent based on hw.ix.enable_aim default.
Reviewed by: erj
MFC after: 1 week
Sponsored by: Multiplay
Differential Revision: https://reviews.freebsd.org/D5060
- Avoid main lock contention by trylock for if_start, if that fails,
schedule TX taskqueue for if_start
- Don't do direct sending if the packet to be sent is large, e.g.
TSO packet.
This change gives me stable 9.1Gbps TCP sending performance w/ TSO
over a 10Gbe directly connected network (the performance fluctuated
between 4Gbps and 9Gbps before this commit). It also improves non-
TSO TCP sending performance a lot.
Reviewed by: adrian, royger
Approved by: adrian (mentor)
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D5074
Currently when the OF_getprop() function returns with error,
the caller (OF_getencprop()) still changes the buffer endiannes.
This may destroy the default value passed in the input buffer if
used on a Little Endian platform.
Reviewed by: mmel
Submitted by: Zbigniew Bodek <zbb@semihalf.com>
Obtained from: Semihalf
Sponsored by: Cavium
The page information array could contain up to 32 elements (i.e. 512B).
And on network side w/ TSO, 11+ (176B+) elements, i.e. ~44K TSO packet,
in the page information array is quite common.
This saves us some cpu cycles.
Reviewed by: adrian, delphij
Approved by: adrian (mentor)
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D4992
According to all available information, VMSWITCH always does the
TCP segment checksum verification before sending the segment to
guest.
Reviewed by: adrian, delphij, Hongjiang Zhang <honzhan microsoft com>
Approved by: adrian (mentor)
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D4991
All used fields are setup one by one, so there is no need to zero
out this large struct.
While I'm here, move the stack variable near its usage.
Reviewed by: adrian, delphij, Jun Su <junsu microsoft com>
Approved by: adrian (mentor)
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D4978
While I'm here, move stack variables near their usage.
Reviewed by: adrian, delphij, Jun Su <junsu microsoft com>
Approved by: adrian (mentor)
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D4977
- Avoid unnecessary malloc/free on transmission path.
- busdma(9)-fy transmission path.
- Properly handle IFF_DRV_OACTIVE. This should fix the network
stalls reported by many.
- Properly setup TSO parameters.
- Properly handle bpf(4) tapping. This 5 times the performance
during TCP sending test, when there is one bpf(4) attached.
- Allow size of chimney sending be tuned on a running system.
Default value still needs more test to determine.
Reviewed by: adrian, delphij
Approved by: adrian (mentor)
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D4972
support frameworks (i.e. regulators/phy/tsensors/fuses...).
It provides simple unified consumers interface for manipulations with
on-chip resets.
Reviewed by: ian, imp (paritaly)
support frameworks(i.e. reset/regulators/phy/tsensors/fuses...).
The clock framework significantly simplifies handling of complex clock
structures found in modern SoCs. It provides the unified consumers
interface, holds and manages actual clock topology, frequency and gating.
It's tested on three different ARM boards (Nvidia Tegra TK1, Inforce 6410 and
Odroid XU2) and on one MIPS board (Creator Ci20) by kan@.
The framework is still far from perfect and probably doesn't have stable
interface yet, but we want to start testing it on more real boards and
different architectures.
Reviewed by: ian, kan (earlier version)
The iWARP Connection Manager (CM) on FreeBSD creates a TCP socket to
represent an iWARP endpoint when the connection is over TCP. For
servers the current approach is to invoke create_listen callback for
each iWARP RNIC registered with the CM. This doesn't work too well for
INADDR_ANY because a listen on any TCP socket already notifies all
hardware TOEs/RNICs of the new listener. This patch fixes the server
side of things for FreeBSD. We've tried to keep all these modifications
in the iWARP/TCP specific parts of the OFED infrastructure as much as
possible.
Submitted by: Krishnamraju Eraparaju @ Chelsio (with design inputs from Steve Wise)
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D4801
