If an error such as an invalid record or one whose decryption fails is
detected on a socket that has received a RST then ktls_drop() could
ignore the error since INP_DROPPED could already be set. In this case
soreceive_generic hangs since it does not return from a KTLS socket
with pending encrypted data unless there is an error (so_error) (this
behavior is to ensure that soreceive_generic doesn't return a
premature EOF when there is pending data still being decrypted).
Note that this was a bug prior to
69542f2682 as tcp_usr_abort would also
have ignored the error in this case.
Reviewed by: gallatin
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D37775
The command to generate termcap.small doesn't use any pipes, so this
option is not needed. Using it also breaks cross-building on hosts
where /bin/sh does not support pipefail such as Linux hosts where
/bin/sh is dash.
Reviewed by: sobomax, imp
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D37865
This reverts commit 92f0cf77db.
This change was incorrect, at least because it uses ovpn_kpeer's tree
for multipbe RB_TREEs.
This is a performance change, not a functional one, so we can revert
this until it can be fixed.
Reported by: Gert Doering <gert@greenie.muc.de>
Sponsored by: Rubicon Communications, LLC ("Netgate")
To quote from a comment above vput_final:
<quote>
* XXX Some filesystems pass in an exclusively locked vnode and strongly depend
* on the lock being held all the way until VOP_INACTIVE. This in particular
* happens with UFS which adds half-constructed vnodes to the hash, where they
* can be found by other code.
</quote>
As is there is no mechanism which allows filesystems to denote that a
vnode is fully initialized, consequently problems like the above are
only found the hard way(tm).
Add rudimentary support for state transitions, which in particular allow
to assert the vnode is not legally unlocked until its fate is decided
(either construction finishes or vgone is called to abort it).
The new field lands in a 1-byte hole, thus it does not grow the struct.
Bump __FreeBSD_version to 1400077
Reviewed by: kib (previous version)
Tested by: pho
Differential Revision: https://reviews.freebsd.org/D37759
While here prefix with v for better consistency with the vnode stuff.
Reviewed by: kib (previous version)
Differential Revision: https://reviews.freebsd.org/D37759
Also add a test to ensure that it is working correctly.
Submitted by: ota_j.email.ne.jp
Reviewed by: mckusick
Differential Revision: https://reviews.freebsd.org/D34012
Correct the format in sysctl net.inet.tcp.bb.disable_all and
sysctl net.inet.tcp.bb.log_auto_all.
Correct the format and the description in
net.inet.tcp.bb.log_auto_mode.
Reviewed by: rscheff, tuexen
MFC after: 1 week
Sponsored by: NetApp, Inc.
Differential Revision: https://reviews.freebsd.org/D37776
In source_hwaddr(), the configured ifname is compared against all
interfaces. However, in main(), the string 'netmap:' is prepended to the
interface string if no explicit type is given. Therefore the ifname will
not match any system interface and the source MAC address is always
empty.
Check for the leading 'netmap:' string and skip past it to match against
system interfaces. Note that 'tap:' and 'pcap:' devices strip the type
string from the ifname in main() so no further work is needed.
MFC after: 7 days
Submitted by: Brian Poole <brian90013@gmail.com>
netmap_monitor_stop() called nm_monitor_none() after the head of
the zero-copy monitors had been reset, thus thinking that there
was nothing left to do.
MFC after: 7 days
Netmap users on FreeBSD are not supposed to import code from the
github netmap repository anymore. They should use the code that
is available in the src repo. We can therefore drop the compatibility
code.
MFC after: 7 days
in seqcount_mutex_t case with removal of extraneous mutex lock/unlock
calls and addition of missing critical section.
While here strip one inline wrap layer to reduce code size.
Fixes startup lockup of i915kms after update to drm-kmod v5.12
Reviewed by: hselasky, bz
MFC after: 1week
Differential Revision: https://reviews.freebsd.org/D37699
for all devices except Kensington Slimblade Trackball as it brokes
some other devices like Contour Rollermouse Red
Add a quirk for it as well.
Reported by: Atte Peltomäki <koston_AT_iki_DOT_fi>
PR: 267922
MFC after: 2 weeks
for all devices except Kensington Slimblade Trackball as it brokes
some other devices like Contour Rollermouse Red
Add a quirk for it as well.
Reported by: Atte Peltomäki <koston_AT_iki_DOT_fi>
PR: 267922
MFC after: 2 weeks
While there, move all error checks into the common place at the start,
and eliminate the 'out' label.
PR: 268528
Analyzed and tested by: Mark Millard <marklmi@yahoo.com>
Reviewed by: mckusick
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D37866
Unlike NFSv3, the NFSv4 server follows mount points
within the file system tree below the NFSv4 root directory.
If there is a file system mounted within this subtree
that returns EOPNOTSUPP for VOP_VPTOFH(), the NFSv4 server
would return an error for the mount point entry.
This resulted in an "I/O error" report from the Linux NFSv4
client. It also put an error code in the Readdir reply
that is not defined in the NFSv4 RFCs.
For the FreeBSD NFSv4 client, the entry with the error would
be ignored, which I think is reasonable behaviour for a
mounted file system that can never be exported.
This patch changes the NFSv4 server behaviour to ignore the
mount point entry and not send it in the Readdir reply.
It also changes the behaviour of Lookup for the entry so
that it replies ENOENT for the mount point directory, so
that it is consistent with no entry in the Readdir reply.
With these two changes, the Linux client behaviour is the
same as the FreeBSD client behaviour. It also avoids
putting an unknown error on the wire to the client.
MFC after: 1 week
This new default-enabled rc will generate a /etc/machine-id file if it
does not exist, and pre-fill it with a newly generated UUID of version 4
[2].
The file is generated in /var/db/machine-id and symlinked to
/etc/machine-id to allow for read-only root partitions.
This file is amongst other things used by libraries like GLib.
Bump FreeBSD version 1400076 to be able to easily add support for older
version of FreeBSD via a package.
[1] Linux machine-id(5): https://www.man7.org/linux/man-pages/man5/machine-id.5.html
[2] f176fe8e7f
Approved by: bapt
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D37722
Re-assign the sc local (syscall number) before moving args for SYS_syscall.
Correct the audit and kdtrace hooks invocations.
Fixes: 140ceb5d95
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
It indicates to a debugger that the thread is stopped at the
kernel->user exit path.
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D37590
and TDB_COREDUMPRQ to TDB_COREDUMPREQ
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D37590
Change the range test in iommu_gas_match_one from '< ubound' to '<=
ubound', and pass a smaller-by-one ubound parameter to it, to avoid
overflow in ubound calculation.
Reported by: andrew
Reviewed by: andrew (previous version)
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D37764
Introduce new prompt format characters:
- '\[' starts the sequence of non-printing chatacters
- '\]' ends the sequence of non-printing characters
Within these sequences, the following characters are now supported:
- '\a' emits ASCII BEL (0x07, 007) character
- '\e' emits ASCII ESC (0x1b, 033) character
- '\r' emits ASCII CR (0x0d, 015) character
- '\n' emits ASCII CRLF sequence
These can be used to embed ANSI sequences into prompt strings.
Example in .shrc:
PS1="\[\e[7m\]\u@\h\[\e[0m\]:\w \\$ "
This tries to maintain some degree of compatibility with GNU bash,
that uses GNU readline library (which behaves slightly different from
BSD editline): It has two "non-printing boundary" characters:
- RL_PROMPT_START_IGNORE (\001)
- RL_PROMPT_END_IGNORE (\002)
while BSD editline only has one (when using EL_PROMPT_ESC setting), so
for this purpose, ASCII \001 was chosen and both \[ and \] emits
this character.
And while here, enlarge PROMPTLEN from 128 to 192 characters.
Reviewed by: jilles
Approved by: jilles
Differential Revision: https://reviews.freebsd.org/D37701
Since a NFSERR_NOFILEHANDLE reply from an NFSv4 server
usually means that the file system is not exported on
the server, change the console log message to indicate
that.
MFC after: 1 week
