entries are stabilized, repeatedly verifies the same entry. Check each
entry in turn.
Reviewed by: kib (code only), alc
Tested by: pho
MFC after: 7 days
Differential Revision: https://reviews.freebsd.org/D22405
Due to ELFv1 specific code in _ctx_start.S and makecontext.c, userspace
context switching was completely broken on ELFv2.
With this change, we now pass the libthr test suite.
Approved by: jhibbits (mentor)
Differential Revision: https://reviews.freebsd.org/D22421
It's still disabled by default, but now it can be enabled with config(5) and
it will be build in LINT.
Reviewed by: imp
MFC after: 1 week
Sponsored by: Axcient
Differential Revision: https://reviews.freebsd.org/D22383
The full release notes can be found on Github:
https://github.com/facebook/zstd/releases/tag/v1.4.4
Notable changes in this release include improved decompression speed (about
10%). See the Github release notes for more details.
MFC after: I'm not going to, but feel free
Relnotes: yes
save_vec_int() for SPE saves off only the high word of the register, leaving
the low word as "garbage", but really containing whatever was in the kernel
register at the time. This leaks into core dumps, and in a near future
commit also into ptrace. Instead, save the GPR in the low word in
save_vec_nodrop(), which is used only for core dumps and ptrace.
Modern gcc errors that "'vec[0]' is used uninitialized in this function"
without us telling it that vec is clobbered. Neither clang nor gcc 4.2.1
error on the existing construct.
Submitted by: bdragon
The adjustments are inspired by the Linux stack, which has had a
functionally equivalent implementation for more than a decade now.
Submitted by: Richard Scheffenegger
Reviewed by: Cheng Cui
Differential Revision: https://reviews.freebsd.org/D18982
This patch addresses a very common case of frequent application stalls,
where TCP runs idle and looses the state of the network.
Submitted by: Richard Scheffenegger
Reviewed by: Cheng Cui
Differential Revision: https://reviews.freebsd.org/D18954
RISC-V inherited this code from arm64, so implement the fix from r354712.
See the revision for the full description.
Submitted by: kevans (arm64 version)
This CVE has already been announced in FreeBSD SA-19:26.mcu.
Mitigation for TAA involves either turning off TSX or turning on the
VERW mitigation used for MDS. Some CPUs will also be self-mitigating
for TAA and require no software workaround.
Control knobs are:
machdep.mitigations.taa.enable:
0 - no software mitigation is enabled
1 - attempt to disable TSX
2 - use the VERW mitigation
3 - automatically select the mitigation based on processor
features.
machdep.mitigations.taa.state:
inactive - no mitigation is active/enabled
TSX disable - TSX is disabled in the bare metal CPU as well as
- any virtualized CPUs
VERW - VERW instruction clears CPU buffers
not vulnerable - The CPU has identified itself as not being
vulnerable
Nothing in the base FreeBSD system uses TSX. However, the instructions
are straight-forward to add to custom applications and require no kernel
support, so the mitigation is provided for users with untrusted
applications and tenants.
Reviewed by: emaste, imp, kib, scottph
Sponsored by: Intel
Differential Revision: 22374
Burn bridges and replace the last two calls of defrouter_select() with
defrouter_select_fib(). That allows us to retire defrouter_select()
and make it more clear in the calling code that it applies to all FIBs.
Sponsored by: Netflix
Pull in the TAILQ_HEAD() as it is not needed outside nd6_rtr.c.
Rename the TAILQ_HEAD() struct and the nd_defrouter variable from
"nd_" to "nd6_" as they are not part of the RFC 3542 API which uses "ND_".
Ideally I'd like to also rename the struct nd_defrouter {} to "nd6_*"
but given that is used externally there is more work to do.
No functional changes.
MFC after: 3 weeks
Sponsored by: Netflix
knobs and indicators for code that mitigates functional and security issues
in the architecture/platform. Controls for regular operational policy should
still go into places security, hw, kern, etc.
The machdep root node is inherently architecture dependent, but mitigations
tend to be architecture dependent as well. Some cases like Spectre do cross
architectural boundaries, but the mitigation code for them tends to be
architecture dependent anyways, and multiple architectures won't be active
in the same image of the kernel.
Many mitigation knobs already exist in the system, and they will be moved
with compat naming in the future. Going forward, mitigations should collect
in machdep.mitigations.
Reviewed by: imp, brooks, rwatson, emaste, jhb
Sponsored by: Intel
Adjust the logic in htable_unlink_entry() to the one in
htable_link_entry() saving a block indent and making it more clear
in which case we do not do any work.
No functional change.
MFC after: 3 weeks
Sponsored by: Netflix
I've noticed that sometimes with enabled DMAR initial write from device
to this address is somehow getting delayed, triggering assertion due to
zero default being invalid.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
- Deduce allowed address range for bus_dma(9) from the hardware version.
Different versions (CPU generations) have different documented limits.
- Remove difference between address ranges for src/dst and crc. At least
docs for few recent generations of CPUs do not mention anything like that,
while older are already limited with above limits.
- Remove address assertions from arguments. While I do not think the
addresses out of allowed ranges should realistically happen there due to
the platforms physical address limitations, there is now bus_dma(9) to
make sure of that, preferably via IOMMU.
- Since crc now has the same address range as src/dst, remove crc_dmamap,
reusing dst2_dmamap instead.
Discussed with: cem
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
After r354748-354750 all uses of the IP6_EXTHDR_CHECK() and
IP6_EXTHDR_GET() macros are gone from the kernel. IP6_EXTHDR_GET0()
was unused. Remove the macros and update the documentation.
Sponsored by: Netflix
While r354748 removed almost all IP6_EXTHDR_CHECK() calls, these
are not part of the PULLDOWN_TESTS.
Equally convert these IP6_EXTHDR_CHECK()s here to m_pullup() and remove
the extra check and m_pullup() in tcp_input() under isipv6 given
tcp6_input() has done exactly that pullup already.
MFC after: 8 weeks
Sponsored by: Netflix
In a few places we have IP6_EXTHDR_GET() left in upper layer protocols.
The IP6_EXTHDR_GET() macro might perform an m_pulldown() in case the data
fragment is not contiguous.
Convert these last remaining instances into m_pullup()s instead.
In CARP, for example, we will a few lines later call m_pullup() anyway,
the IPsec code coming from OpenBSD would otherwise have done the m_pullup()
and are copying the data a bit later anyway, so pulling it in seems no
better or worse.
Note: this leaves very few m_pulldown() cases behind in the tree and we
might want to consider removing them as well to make mbuf management
easier again on a path to variable size mbufs, especially given
m_pulldown() still has an issue not re-checking M_WRITEABLE().
Reviewed by: gallatin
MFC after: 8 weeks
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D22335
Remove the KAME introduced PULLDOWN_TESTs which did not even
have a compile-time option in sys/conf to turn them on for a
custom kernel build. They made the code a lot harder to read
or more complicated in a few cases.
Convert the IP6_EXTHDR_CHECK() calls into FreeBSD looking code.
Rather than throwing the packet away if it would not fit the
KAME mbuf expectations, convert the macros to m_pullup() calls.
Do not do any extra manual conditional checks upfront as to
whether the m_len would suffice (*), simply let m_pullup() do
its work (incl. an early check).
Remove extra m_pullup() calls where earlier in the function or
the only caller has already done the pullup.
Discussed with: rwatson (*)
Reviewed by: ae
MFC after: 8 weeks
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D22334
In order to allow software with multiple (different) options
for lex and yacc add extra per-file options to the calls.
This is especially useful when one .l file needs -Pprefix.
Reviewed by: imp
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D22337
Change the FreeBSD ELF ABIs to use this new hook to copyout ELF auxv
instead of doing it in the sv_fixup hook. In particular, this new
hook allows the stack space to be allocated at the same time the auxv
values are copied out to userland. This allows us to avoid wasting
space for unused auxv entries as well as not having to recalculate
where the auxv vector is by walking back up over the argv and
environment vectors.
Reviewed by: brooks, emaste
Tested on: amd64 (amd64 and i386 binaries), i386, mips, mips64
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D22355
We need to ensure that installdirs-FOO runs before installfiles-FOO since
otherwise the directory may not exist when we attempt to install the target.
This was randomly causing failures in our Jenkins instance when installing
drti.o in cddl/lib/drti.
Reviewed By: brooks
Differential Revision: https://reviews.freebsd.org/D22382
Since st_birthtime doesn't exists on Linux (unless you use statx(2)), we
instead populate it with the st_ctime value.
Reviewed By: emaste
Differential Revision: https://reviews.freebsd.org/D22386
By using '__' instead of '.' as the separator we can also support systems
that use dash as /bin/sh (it's the default shell on Ubuntu/Debian). Dash
will unset any environment variables that use a non alphanumeric+undedscore
character and therefore submakes will fail to import the COMPILER_*
variables if we use '.' as the separator.
Reviewed By: emaste
Differential Revision: https://reviews.freebsd.org/D22381
We are taking the same actions in both cases of the branch inside the block.
Simplify that code as the extra branch is not needed.
MFC after: 3 weeks
Sponsored by: Netflix
Remove function prototypes which are not needed (no use before function
definition for these file static functions).
MFC after: 3 weeks
Sponsored by: Netflix
[InstCombine] Disable some portions of foldGEPICmp for GEPs that
return a vector of pointers. Fix other portions.
llvm-svn: 370114
This should fix instances of 'Assertion failed: (isa<X>(Val) &&
"cast<Ty>() argument of incompatible type!"), function cast, file
/usr/src/contrib/llvm/include/llvm/Support/Casting.h, line 255', when
building openjdk8 for aarch64 and armv7.
Reported by: jbeich
PR: 236566
MFC after: 3 days
Summary:
This is a more optimal way of doing atomic_compset_masked() than the
fallback in sys/_atomic_subword.h. There's also an override for
_atomic_fcmpset_masked_word(), which may or may not be necessary, and is
unused for powerpc.
Reviewed by: kevans, kib
Differential Revision: https://reviews.freebsd.org/D22359
SBI version 0.2 introduces functions for obtaining the details of the
SBI implementation, such as version and implemntation ID. Print this
info at startup when it is available.
Reviewed by: jhb, kp
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D22327
The Supervisor Binary Interface (SBI) specification v0.2 is a backwards
incompatible update to the SBI call interface for kernels running in
supervisor mode. The goal of this update was to make it easier for new
and optional functionality to be added to the SBI.
SBI functions are now called by passing an "extension ID" and a
"function ID" which are passed in a7 and a6 respectively. SBI calls
will also return an error and value in the following struct:
struct sbi_ret {
long error;
long value;
}
This version introduces several new functions under the "base"
extension. It is expected that all SBI implementations >= 0.2 will
support this base set of functions, as they implement some essential
services such as obtaining the SBI version, CPU implementation info, and
extension probing.
Existing SBI functions have been designated as "legacy". For the time
being they will remain implemented, but it is expected that in the
future their functionality will be duplicated or replaced by new SBI
extensions. Each legacy function has been assigned its own extension ID,
and for now we simply probe and assert for their existence.
Compatibility with legacy SBI implementations (such as BBL) is
maintained by checking the output of sbi_get_spec_version(). This
function is guaranteed to succeed by the new spec, but will return an
error in legacy implementations. We use this as an indicator of whether
or not we can rely on the new SBI base extensions.
For further info on the Supervisor Binary Interface, see:
https://github.com/riscv/riscv-sbi-doc/blob/master/riscv-sbi.adoc
Reviewed by: kp, jhb
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D22326
