Since lots of work has been done on bhyve since 2014, increase the version
to 13.0 to match 13-CURRENT, and update the release date.
Reviewed by: grehan
Differential Revision: https://reviews.freebsd.org/D27147
Read CPUID leaf 0x8000008 to determine max supported phys address and
create BAR region right below it, reserving 1/4 of the supported guest
physical address space to the 64bit BARs mappings.
PR: 250802 (although the issue from PR is not fixed by the change)
Noted and reviewed by: grehan
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D27095
If bhyve is used to emulate 512e access in guest OS, then discard addresses should be properly aligned.
Otherwise ioctl DIOCGDELETE fails for 512b requires on devices with 4K sector size.
see g_dev_ioctl() in sys/geom/geom_dev.c
Submitted by: Vitaliy Gusev <gusev.vitaliy@gmail.com>
MFC after: 1 week
Sponsored by: vStack.com
Differential Revision: https://reviews.freebsd.org/D27075
"smbios.system.family" as " ".
This presents challenges for both humans and tools when trying to parse output
that uses those results.
The new values reported are now:
smbios.system.family="Virtual Machine"
smbios.system.maker="FreeBSD"
PR: 250728
Approved by: grehan@FreeBSD.org
Sponsored by: Netflix
bhyve sometimes segfaults when using an e1000 NIC with a Windows guest.
We are only updating our tdba and cached host mapping when the low address
register is written and when tx is set enabled, but not when the high address
or length registers are written. It is observed that Windows 10 is occasionally
enabling tx first then writing the registers in the order low, high, len. This
leaves us with a bogus base address and mapping, which causes a segfault later
when we try to copy from a descriptor that has unpredictable garbage in a
pointer.
Updating the address and mapping when any of those registers change seems to fix
that particular issue.
Reviewed by: mav, grehan (bhyve)
MFC after: 1 week
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D26798
VirtFS allows sharing an arbitrary directory tree between bhyve virtual
machine and the host. Current implementation has a fairly complete support
for 9P2000.L protocol, except for the extended attribute support. It has
been verified to work with the qemu-kvm hypervisor.
Reviewed by: rgrimes, emaste, jhb, trasz
Approved by: trasz (mentor)
MFC after: 1 month
Relnotes: yes
Sponsored by: Conclusive Engineering (development), vStack.com (funding)
Differential Revision: https://reviews.freebsd.org/D10335
'ident' was replaced with 'ata_ident' in revision r363596.
Submitted by: Vitaliy Gusev <gusev.vitaliy_gmail.com>
Reviewed by: Darius Mihai
Differential Revision: https://reviews.freebsd.org/D26263
The language id of String Descriptors in usb mouse is
0x0904, while the spec require 0x0409 (English - United States)
Submitted by: Wanpeng Qian
Reviewed by: grehan
Approved by: grehan (#bhyve)
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D26472
The NVMe emulation code did not explicitly initialize queue head and
tail pointers on queue creation. As these pointers are part of
calloc()'ed memory, this only becomes a problem if the queues are
deleted and then recreated.
This error can manifest with messages about completions not matching a
command.
Some operating systems believe bhyve's emulated NVMe drive is failing
based on certain values in the SMART / Health Information log page being
zero. Fix is to set the reported temperature and available spare values
to reasonable defaults.
Submitted by: wanpengqian@gmail.com
Reviewed by: grehan
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24202
Allow the serial number, firmware revision, model number and nominal media
rotation rate (nmrr) parameters to be set from the command line.
Note that setting the nmrr value can be used to indicate the AHCI
device is an SSD.
Submitted by: Wanpeng Qian
Reviewed by: jhb, grehan (#bhyve)
Approved by: jhb, grehan
MFC after: 3 weeks
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D24174
This fixes a coredump with NetBSD guests when XHCI is configured.
On seeing the AC64 flag clear, the NetBSD XHCI driver was only writing
to the lower 32-bits of 64-bit physical address registers. The emulation
relies on a write to the hi 32-bits to calculate a host virtual address
for internal use, and has always supported 64-bit addressing.
All other guests were seen to write to both the lo- and hi- address
registers, regardless of the AC64 setting.
Discussed with: Leon Dang (author)
Tested with: Ubuntu 16/18/20, Windows10, OpenBSD UEFI guests.
MFC after: 2 weeks.
Allow guests to set the RTC bit in the ACPI PM control register.
This eliminates an annoying (and harmless) Linux kernel boot message.
PR: 244721
Submitted by: Jose Luis Duran
MFC after: 1 week
The NVMe specification requires unused entries in the Identify, Active
Namespace ID data to be zero. Fix is bzero the provided page, similar to
what is done for the Namespace Descriptors list.
Fixes UNH Tests 2.6 and 2.9
Tested by: Jason Tubnor
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24901
Dataset Management range specifications may have a zero length (a.k.a.
an empty range definition). Handle the case of all ranges being empty by
completing with Success (DSM commands are advisory only). For
Deallocate, skip empty range definitions when sending TRIM's to the
backing storage.
Fixes UNH Test 2.2.4
Reviewed by: imp
Tested by: Jason Tubnor
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24900
If the Predictable Latency Mode is not supported, NVMe Controllers must
return Invalid Field in Command status for the Get Features command
with IDs:
- Predictable Latency Mode Config
- Predictable Latency Mode Window
Fixes UNH Tests 3.6
Tested by: Jason Tubnor
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24899
This adds support for NVMe Get Features, Interrupt Vector Config
parameter error checking done by the UNH compliance tests.
Fixes UNH Tests 1.6.8 and 5.5.6
Tested by: Jason Tubnor
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24898
This commit updates the Identify Controller data to advertise the
Controller supports a single firmware slot and that firmware slot 1 is
read-only. Additionally, it returns an "Invalid Firmware Slot" error
when the host issues any Firmware Commit command (a.k.a. Firmware
Activate).
Fixes UNH Test 5.5.3
Tested by: Jason Tubnor
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24897
This adds support to bhyve's NVMe device emulation for processing Async
Event Requests but not returning them (i.e. Async Event Notifications).
Fixes UNH Test 5.5.2
Tested by: Jason Tubnor
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24896
Add checks that the combination of Starting LBA and Number of Logical
Blocks in a command will not exceed the range of the underlying storage.
Note that because NVMe specifices the Starting LBA as a uint64_t, care
must be taken when converting it and the block count to avoid an integer
overflow.
Fixes UNH Tests 2.2.3, 2.3.2, and 2.4.2
Tested by: Jason Tubnor
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24895
SMART data in NVMe includes statistics for number of read and write
commands issued as well as the number of "data units" read and written.
NVMe defines "data unit" as thousands of 512 byte blocks (e.g. 1 data
unit is 1-1,000 512 byte blocks, 3 data units are 2,001-3,000 512 byte
blocks).
This patch implements counters for:
- Data Units Read
- Data Units Written
- Host Read Commands
- Host Write Commands
and exposes the values when the guest reads the SMART/Health Log Page.
Fixes UNH Test 1.3.8
Tested by: Jason Tubnor
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24894
For NVMe emulation, validate the Data Set Management LBA ranges do not
exceed the capacity of the backing storage. If they do, return an "LBA
Out of Range" error.
Fixes UNH Test 2.2.3
Tested by: Jason Tubnor
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24893
NVMe controllers advertise their Max Data Transfer Size (MDTS) to limit
the number of page descriptors in an I/O request. Take advantage of this
and size the struct pci_nvme_ioreq accordingly.
Ensuring these values match both future-proofs the code and allows
removing some complexity which only exists to handle this possibility.
Tested by: Jason Tubnor
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24891
Split the NVM I/O function (i.e. nvme_opc_write_read) into separate
functions - one for RAM based backing-store and another for disk based
backing-store for easier maintenance. No functional changes.
Tested by: Jason Tubnor
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24890
The Format NVM command mainly allows the host to specify the block size
and protection information used for the Namespace. As the bhyve
implementation simply maps the capabilities of the backing storage
through to the guest, there isn't anything to implement. But a side
effect of the format is the NVMe Controller shall not return any data
previously written (i.e. erase previously written data). This patch
implements this later behavior to provide a compliant implementation.
Fixes UNH Test 1.6
Tested by: Jason Tubnor
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24889
Create a generic Get/Set Features by saving off the contents of CDW11
from the Set command and returning the saved value in the completion of
the Get command. Implementation allows providing optional implementation
for both Set and Get.
Add infrastructure to determine which feature ID's are namespace
specific and flag violations of this category of error.
Also adds the feature specific behavior of Set Features, Number of
Queues to only allow this command once per Controller reset.
Fixes UNH Tests 1.2, 5.4, and 5.5.6
Tested by: Jason Tubnor
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24887
Fix the logic in nvme_opc_get_log_page to calculate the number of DWORDS
(uint32_t) instead of WORDS (uint16_t) for the byte length. And only
return the allowed number of Log Page bytes as determined by the user
request and actual size of the requested log page.
Fixes UNH Test 1.3
Tested by: Jason Tubnor
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24885
Consolidate the code which writes Completion Queue entries and updates
the CQ doorbell value. While in the neighborhood, convert the "toggle CQ
phase bit" code to use an XOR operation instead of an "if/else" branch.
Tested by: Jason Tubnor
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24882
The NVMe code attempted to ensure thread safety through a combination of
using atomics and a "busy" flag. But this approach leads to unavoidable
race conditions.
Fix is to use per-queue mutex locks to ensure thread safety within the
queue processing code. While in the neighborhood, move all the queue
initialization code to a common function.
Tested by: Jason Tubnor
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D19841
This adds support for the NVMe I/O command Flush. For block-based
devices, submit a DIOCGFLUSH to the backing storage. Otherwise, command
is treated like a NOP and completes with a Successful status.
Tested by: Jason Tubnor
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24880
This refactors the NVMe I/O command processing function to make adding
new commands easier. The main change is to move command specific
processing (i.e. Read/Write) to separate functions for each NVMe I/O
command and leave the common per-command processing in the existing
pci_nvme_handle_io_cmd() function.
While here, add checks for some common errors (invalid Namespace ID,
invalid opcode, LBA out of range).
Add myself to the Copyright holders
Reviewed by: imp
Tested by: Jason Tubnor
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24879
Convert the debug and warning logging macros to be parameterized and
correctly use bhyve's PRINTLN macro.
Reviewed by: imp
Tested by: Jason Tubnor
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24878
The TRB processing loop could potentially call a back-end twice
with the same status transaction. While this was generally benign,
some code paths in the tablet backend weren't set up to handle
this case, resulting in a NULL dereference.
Fix by
- returning a STALL error when an invalid request was seen in the backend
- skipping a call to the backend if the number of packets in a status
transaction was zero (this code fragment was taken from the Intel ACRN
xhci backend)
PR: 246964
Reported by: Ali Abdallah
Discussed with: Leon Dang (author)
Reviewed by: jhb (#bhyve), Leon Dang
Approved by: jhb
Obtained from: Intel ACRN (partially)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D25228
Introduce -D flag that allows for the VM to be destroyed on guest initiated
power-off by the bhyve(8) process itself.
This is quality of life change that allows for simpler deployments without
the need for bhyvectl --destroy.
Requested by: swills
Reviewed by: 0mp (manpages), grehan, kib, swills
Approved by: kib (mentor)
MFC after: 2 weeks
Sponsored by: Mysterious Code Ltd.
Differential Revision: https://reviews.freebsd.org/D25414
If userspace has a newer bhyve than the kernel, it may be able to decode
and emulate some instructions vmm.ko is unaware of. In this scenario,
reset decoder state and try again.
Reviewed by: grehan
Differential Revision: https://reviews.freebsd.org/D24464
- Return 2 x 16-bit registers in the correct byte order
for a 4-byte read that spans the CMD/STATUS register.
This reversal was hiding the capabilities-list, which prevented
the MSI capability from being found for XHCI passthru.
- Reorganize MSI/MSI-x config writes so that a 4-byte write at the
capability offset would have the read-only portion skipped.
This prevented MSI interrupts from being enabled.
Reported and extensively tested by Anatoli (me at anatoli dot ws)
PR: 245392
Reported by: Anatoli (me at anatoli dot ws)
Reviewed by: jhb (bhyve)
Approved by: jhb, bz (mentor)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D24951
Expose the special kernel LAPIC, IOAPIC, and HPET devices to userspace
for use in, e.g., fallback instruction emulation (when userspace has a
newer instruction decode/emulation layer than the kernel vmm(4)).
Plumb the ioctl through libvmmapi and register the memory ranges in
bhyve(8).
Reviewed by: grehan
Differential Revision: https://reviews.freebsd.org/D24525
After r360820, additional parameters are passed through the argument 'opts', and the name of the backend through the argument 'devname'. So, there is no need to skip the backend name from the 'opts' argument.
The backend uses the socket API with the PF_NETGRAPH protocol family, which is provided by the ng_socket(4).
To use the new backend, provide the following bhyve option:
-s X:Y:Z,[virtio-net|e1000],netgraph,socket=[ng_socket name],path=[destination node],hook=[our socket src hook],peerhook=[dst node hook]
Reviewed by: vmaffione, lutz_donnerhacke.de
Approved by: vmaffione (mentor)
Sponsored by: vstack.com
Differential Revision: https://reviews.freebsd.org/D24620
r359704 introduced an 'mtu' option for the virtio-net device emulation.
Update the man page to describe the new option.
Reviewed by: bcr
Differential Revision: https://reviews.freebsd.org/D24723