Commit Graph

1184 Commits

Author SHA1 Message Date
Poul-Henning Kamp
3389ae9350 Remove ~25 unneeded #include <sys/conf.h>
Remove ~60 unneeded #include <sys/malloc.h>
2000-04-19 14:58:28 +00:00
Poul-Henning Kamp
8177437d85 Complete the bio/buf divorce for all code below devfs::strategy
Exceptions:
        Vinum untouched.  This means that it cannot be compiled.
        Greg Lehey is on the case.

        CCD not converted yet, casts to struct buf (still safe)

        atapi-cd casts to struct buf to examine B_PHYS
2000-04-15 05:54:02 +00:00
Doug Rabson
f7b7769172 * Factor out the object system from new-bus so that it can be used by
non-device code.
* Re-implement the method dispatch to improve efficiency. The new system
  takes about 40ns for a method dispatch on a 300Mhz PII which is only
  10ns slower than a direct function call on the same hardware.

This changes the new-bus ABI slightly so make sure you re-compile any
driver modules which you use.
2000-04-08 14:17:18 +00:00
Doug Rabson
2e215a3dcc Allow MAXDEP dependants, not MAXDEP-1. 2000-04-04 07:48:04 +00:00
Poul-Henning Kamp
c244d2de43 Move B_ERROR flag to b_ioflags and call it BIO_ERROR.
(Much of this done by script)

Move B_ORDERED flag to b_ioflags and call it BIO_ORDERED.

Move b_pblkno and b_iodone_chain to struct bio while we transition, they
will be obsoleted once bio structs chain/stack.

Add bio_queue field for struct bio aware disksort.

Address a lot of stylistic issues brought up by bde.
2000-04-02 15:24:56 +00:00
Kazutaka YOKOTA
d0a99324a3 - Add temporary workaround to fool some "clever" KVM switch products
which think they know the IntelliMouse 4-byte packet and believe,
  wrongly, that any other protocols use 3-byte packets.
- Update a couple of comment lines for A4 Tech mice.
2000-04-02 08:28:21 +00:00
Warner Losh
b6f6dacdd3 Add support for pci modems. ONLY CONTROLLER BASED MODEMS. This
doesn't support winmodems, softmodems, hcf or any other modem that
relies on the host to do any sort of soft control for any aspect of
the modem's function.  There are two modems known to work:
	3COM FaxModem PCI.
	ActionTec 56k VoiceMessaging PCI Modem
and the following modem might work
	Multitech PCI FaxModem	(not sure about this)
and the serial pci cards might work too.  I have neither these
hardware items so I can't add support for them.
2000-04-01 06:14:21 +00:00
Doug Rabson
ca403ff820 Don't use too-large stack buffers.
Submitted by: Nikolai Saoukh <nms@otdel-1.org>
2000-03-31 19:35:41 +00:00
Kazutaka YOKOTA
091323598f - Fix SC_ALT_MOUSE_IMAGE; don't blink the mouse cursor.
- Fix non-destructive, underline text cursor.
2000-03-31 16:05:46 +00:00
Doug Rabson
acd3131b4b Fixes to parse more complex ISA PnP configurations.
Submitted by: Nikolai Saoukh <nms@Brigada-A.Ethereal.RU>
PR:	      kern/17219
2000-03-31 07:12:12 +00:00
Peter Wemm
39f1e703ec Recognize USR3050 "U.S. Robotics 56K FAX INT" fax modem.
PR:		17702
Submitted by:	Scot W. Hetzel <hetzels@westbend.net>
2000-03-31 07:09:08 +00:00
Doug Rabson
1f1624dcee Fix PnP memory range calculations.
Submitted by: Nikolai Saoukh <nms@Brigada-A.Ethereal.RU>
PR:	      kern/16712
2000-03-31 07:07:51 +00:00
Poul-Henning Kamp
56a2308964 Fix floppy driver after my isadma changes. 2000-03-25 21:20:23 +00:00
Poul-Henning Kamp
91266b96c4 Isolate the Timecounter internals in their own two files.
Make the public interface more systematically named.

Remove the alternate method, it doesn't do any good, only ruins performance.

Add counters to profile the usage of the 8 access functions.

Apply the beer-ware to my code.

The weird +/- counts are caused by two repocopies behind the scenes:
	kern/kern_clock.c -> kern/kern_tc.c
	sys/time.h -> sys/timetc.h
(thanks peter!)
2000-03-20 14:09:06 +00:00
Poul-Henning Kamp
b99c307a21 Rename the existing BUF_STRATEGY() to DEV_STRATEGY()
substitute BUF_WRITE(foo) for VOP_BWRITE(foo->b_vp, foo)

substitute BUF_STRATEGY(foo) for VOP_STRATEGY(foo->b_vp, foo)

This patch is machine generated except for the ccd.c and buf.h parts.
2000-03-20 11:29:10 +00:00
Poul-Henning Kamp
21144e3bf1 Remove B_READ, B_WRITE and B_FREEBUF and replace them with a new
field in struct buf: b_iocmd.  The b_iocmd is enforced to have
exactly one bit set.

B_WRITE was bogusly defined as zero giving rise to obvious coding
mistakes.

Also eliminate the redundant struct buf flag B_CALL, it can just
as efficiently be done by comparing b_iodone to NULL.

Should you get a panic or drop into the debugger, complaining about
"b_iocmd", don't continue.  It is likely to write on your disk
where it should have been reading.

This change is a step in the direction towards a stackable BIO capability.

A lot of this patch were machine generated (Thanks to style(9) compliance!)

Vinum users:  Greg has not had time to test this yet, be careful.
2000-03-20 10:44:49 +00:00
Kazutaka YOKOTA
ea20901db7 Missing pieces of the last commit ;-( 2000-03-19 04:37:18 +00:00
Kazutaka YOKOTA
db3e34cb71 - Properly keep track of I/O port resources.
- Use bus_space_read/write() to access the ports.
2000-03-19 03:25:13 +00:00
Joerg Wunsch
5f830ea2cd Make the Y-E Data PCMCIA floppy of the Toshiba Libretto work under
-current.  It doesn't work yet as stable as the 3.x/PAO version of the
driver does, however, i get occasional `FDC direction bit not set' and
other weird messages, but it basically works at least.

The old (defunct) #ifdef FDC_YE stuff has been eliminated completely
now, PCMCIA-FDC specific functions have been implemented differently
where needed.

Unfortunately, due to the fact that the traditional PeeCee FDC with
its funny non-contiguous register space (one register for WD1003
harddisk controllers is interleaved into the FDC register set), and
Peter's subsequent changes involving two different bus space handles
for normal FDCs, the changes required for the Y-E stuff are more
complex than i'd love them to be.  I've done my best to keep the logic
for normal FDCs intact.

Since the Y-E FDC seems to lose interrupts after a FDC reset
sometimes, i've also replaced the timeout logic in fd_turnoff() to
generate an artificial pseudo interrupt in case of a timeout while the
drive has still outstanding transfers waiting.  This avoids the total
starvation of the driver that could be observed with highly damaged
media under 3.x/PAO.  This part of the patch has been revied by bde
previously.

I've fixed a number of occasions where previous commits have been
missing the encapuslation of ISA DMA related functions inside
FDC_NODMA checks.

I've added one call to SET_BCDR() during preparation of the format
floppy operation.  Floppy formatting has been totally broken before in
3.x/PAO (garbage ID fields have been written to the medium, causing
`wrong cylinder' errors upon media reading).  This is just black
magic, i don't have the slightes idea _why_ this needs to be but just
copied over the hack that has been used by the PAO folks in the normal
read/write case anyway.

The entired device_busy() stuff seems to be pointless to me.  In any
case, i had to add device_unbusy() calls symmetrical to the
device_busy() calls, otherwise the PCMCIA floppy driver could never be
deactivated.  (As it used to be, it caused a `mark the device busier
and busier' situation.)  IMHO, all block device drivers should be
marked busy based on active buffers still waiting for the driver, so
the device_unbusy() calls should probably go to biodone().  Only one
other driver (whose name escapes me at the moment) uses device_busy()
calls at all, so i question the value of all this...

I think this entire `device busy' logic simply doesn't fit for PCMCIA
&al.  It cannot be the decision of some piece of kernel software to
declare a device `busy by now, you can't remove it', when the actual
physical power of removing it is the user pulling the card.  The
kernel simply has to cope with the removal, however busy the device
might have been by the time of the removal, period.  Perhaps a force
flag needs to be added?

Upon inserting the card a second time, i get:

WARNING: "fd" is usurping "fd"'s cdevsw[]
WARNING: "fd" is usurping "fd"'s bmaj

I suspect this is related to the XXX comment at the call to
cdevsw_add().  Does anybody know what the correct way is to cleanup
this?
2000-03-18 18:27:01 +00:00
Kazutaka YOKOTA
3346e881c1 - Add Support for the following PS/2 mice:
- Microsoft IntelliMouse Explorer: 2 buttons on top, 2 side buttons
    and a wheel which also acts as the middle button.  The mouse is
    recognized as "IntelliMouse Explorer".
  - Genius NetScroll Optical: 2 buttons on top, 2 side buttons and a
    wheel which also acts as the middle button.  The mouse is recognized
    as "NetMouse/NetScroll Optical".
  - MouseSystems SmartScroll Mouse (OEM from Genius?): 3 buttons on top,
    1 side button and a wheel.  The mouse is recognized as Genius
    "NetScroll".
  - IBM ScrollPoint: 2 buttons on top and a stick between the buttons.
    The stick can perform "horizontal scroll" in W*ndows environment.
    The horizontal movement of the stick is detected.  It is currently
    mapped to the Z axis movement in the same way as the first wheel.
    The mouse is recognized as "MouseMan+", as it is considered to be
    a variation of MouseMan.
  - A4 Tech 4D and 4D+ mice. These mice have two wheels! The movement
    of the second wheel is reported as the Z axis movement in the
    same way as the first wheel. These mice are recognized as "4D
    Mouse" and "4D+ Mouse".
  - Tweak IntelliMouse support code a bit so that less-than-compatible
    wheel mice can work properly with the psm driver.
- Add driver configuration flags which correspond to the kernel
  options PSM_HOOKRESUME and PSM_RESETAFTERSUSPEND, so that we don't
  need to recompile the kernel when we need these functions.
- Properly keep track of the irq resource.
- Add a watchdog timer in case interrupts are lost (experimental).
- Add `detach' function (experimental).
2000-03-18 15:21:40 +00:00
Poul-Henning Kamp
d8b47cbb70 Stop isadma from abusing the B_READ, B_RAW and B_WRITE flags.
Define ISADMA_{READ,WRITE,RAW} macros with the same numeric
values as the B_{READ,WRITE,RAW} and use them instead throughout.
2000-03-13 10:19:32 +00:00
Warner Losh
633f93bee5 Fix crashes on card eject for pccard modems. We check for NULL when
we get the com address.  If so, we go ahead and return.  Bruce thinks
there's a bug in the pccard layer that it terminates devices with
extreme prejustice rather than letting them deside for themselves when
to terminate (and he's likely right).  This fix doesn't change that,
but instead works around it by checking for NULL pointers at more
places than before.

The detach routine still calls functions at interrupt level that
aren't reentrant.  In theory this could cause a problem, but none
showed up in practice.  Future versions should correct this problem,
likely by making the detach process a thread/process at the pccard
level.  NEWCARD will do this, and the current pccard layer should
likely be modified to that as well, should it live long enough.

A few style nits of the same form that were in my original patch sent
off to bde were also fixed as part of this process.  Mostly use of
!ptr and return ENOPARENS.

This should prevent a crash on suspend with an active ppp link as
well, but that wasn't tested.

Reviewed by:	bde
Approved by:	jkh
2000-03-11 20:22:09 +00:00
Peter Wemm
d365f16644 Recognize another modem, "PMC2430 - Pace 56 Voice Internal Modem"
Submitted by:	Mark Ovens <mark@ukug.uk.freebsd.org>
2000-03-05 14:44:05 +00:00
Peter Wemm
fee576b2e5 Fix two more problems with freeing the softc data manually. subr_bus.c
is responsible for this and this will lead to malloc 'freeing already
free' type panics.  One was in the probe code, the other was in the
pccard eject? code.

Not explicitly approved by: jkh (but the first is fallout from subr_bus.c
rev 1.54 which was an approved commit, the second is the same problem)
2000-03-02 03:45:41 +00:00
Peter Wemm
a6b8513096 Don't free(sc) before returning an error from probe, it does not "belong"
to us, subr_bus.c will free it.  This bug (panic: freeing already free)
was exposed by kern/subr_bus.c rev 1.54

Not explicitly approved by: jkh (but this is a showstopper and fallout of
the above approved change)
2000-03-01 19:30:36 +00:00
Kazutaka YOKOTA
9e6f8bee0e Do not add children (atkbd and psm) if they are disabled.
Approved by: jkh
2000-02-25 11:40:31 +00:00
Gary Jennejohn
4f9d49f140 Newbus-ify the USR Sportster TA Intern driver.
Enable the driver in sys/conf/files.i386.

In isa/isavar.h increase ISA_NPORT from 32 to 50. This is required
because this brain-damaged card maps 49 (!) port ranges. This does
not have a negative impact because this value only specifies the maximum
number of entries in a linked list and not the size of an array which
is allocated in all drivers.

The register/fifo access routines were not newbus-ified because
1) I knew that the old code worked and is simpler and more efficient
2) the if_ed driver does something similar and
3) the newbus macros collapse to inb/outb anyway.

Reviewed and tested by:	hm
Approved by:	jkh
2000-02-21 02:10:10 +00:00
Bruce Evans
34ae9210dd Fixed regressions in rev.1.274:
1) Non-AST4 multiport cards were broken by bypassing the code that changes
   `idev' to the multiport master device.
2) AST4 multiport cards apparently were broken by inverting the test for
   the master device having an irq.
3) Error handling for nonexistent master devices was broken by removing a
   check for a null pointer.
4) `int' error codes returned by bus_get_resource() were assigned directly
   to the boolean variable com->no_irq.  Probably harmless, since the
   boolean is implemented as a u_char.

Submitted by:	part 1) by Chris Radek <cradek@in221.inetnebr.com>
		part 2) by yokota
Approved by:	jkh
2000-02-15 17:29:09 +00:00
Mike Smith
208cc52f94 When allocating resources in the following cases:
- trying for a fit for a PnP configuration from a device
 - soaking up resources from a configuration that were not allocated by
   the driver

do not attempt to activate them.  Only a device driver that is aware of
the nature of the resource and its suitability can be certain that
activating a resource, particularly a memory resource, is a safe thing
to do.

This was prompted by the discovery that many systems report all physical
memory through a PNP0c02 device; activating this resource maps all
physical memory into the kernel's virtual space, either blowing out the
kernel pagetable or in the worst case causing a panic in pmap_mapdev()
if the system has too much physical memory.

Authorised by:	jkh
Reviewed by:	dfr
2000-02-11 04:35:07 +00:00
Peter Wemm
8f8e587948 Use config's conditional compilation rather than using #ifdefs that make
modular compilation harder.  I'm doing this because people seem to like
cut/pasting examples of bad practices in existing code.
2000-01-29 15:08:56 +00:00
Peter Wemm
2b898d39e5 Remove #include "ppc.h" and #if NPPC > 0 - this is always true as it is
'optional ppc' in conf/files*
2000-01-29 14:02:30 +00:00
Bruce Evans
689315d4f7 "Completed" the previous fix. Return ENOMEM on memory allocation failure
in sioattach(), not ENXIO.  Free resources before returning early in
sioprobe() and sioattach().
2000-01-29 03:02:55 +00:00
Doug Rabson
d64d73c906 * Don't use ivars to access resources, bus_set/get_resource is much better.
* First approximation of making this work on alpha (not working yet).
2000-01-25 22:21:45 +00:00
Nick Hibma
9c918de3de Return ENXIO on error, not 0. Seems to have been skipped when converting
to newbus.

Reviewed by:	bde
2000-01-23 15:11:15 +00:00
Peter Wemm
5995e84e19 Add another four device ID's for isa pnp modems. The USR's seem to use
the same vendor and logical ID.  The rest I am not sure whether they
are vendor or logical, but it won't hurt if I've put a vendor ID here
as merely will not match.  These came from the old sio-pnp code, hence
the uncertainty about which ID it is.
2000-01-18 09:30:58 +00:00
Peter Wemm
2d77b66efb Add ADS7182 as a known Joystick. 2000-01-18 08:38:35 +00:00
Mike Smith
01fef73008 Don't mark unallocated resources as active; the goal is to reserve them,
and there may be a good reason for them being unallocated (eg. they're
nonsensical or not useful).  The goal here is simply to reserve them
against accidental use by other code.
2000-01-18 02:15:05 +00:00
Peter Wemm
a9d565fcd2 Don't do device_set_desc() until after checking for PnP probes. Otherwise
things like sound cards can get called "Parallel port".  A note to the
unwary; the isa-pnp devices in the system are probed like PCI - each
device ID is passed to *all* isa probe routines to find the best match.
If the driver is not prepared to deal with this, it must abort in this
scenario or it will try and claim all PnP devices.
2000-01-14 05:03:23 +00:00
Nicolas Souchu
0f210c922b Port of ppbus standalone framework to the newbus system.
Note1: the correct interrupt level is invoked correctly for each driver.
       For this purpose, drivers request the bus before being able to
       call BUS_SETUP_INTR and BUS_TEARDOWN_INTR call is forced by the ppbus
       core when drivers release it. Thus, when BUS_SETUP_INTR is called
       at ppbus driver level, ppbus checks that the caller owns the
       bus and stores the interrupt handler cookie (in order to unregister
       it later).

       Printing is impossible while plip link is up is still TRUE.
       vpo (ZIP driver) and lpt are make in such a way that
       using the ZIP and printing concurrently is permitted is also TRUE.

Note2: specific chipset detection is not done by default. PPC_PROBE_CHIPSET
       is now needed to force chipset detection. If set, the flags 0x40
       still avoid detection at boot.

Port of the pcf(4) driver to the newbus system (was previously directly
connected to the rootbus and attached by a bogus pcf_isa_probe function).
2000-01-14 00:18:06 +00:00
Andrew Gallatin
91dab55369 Make this compile on alpha 2000-01-13 02:09:44 +00:00
Kazutaka YOKOTA
e2f29c6e43 Make the mouse cursor char code configurable via the CONS_MOUSECTL
ioctl.

By popular demand.
2000-01-12 12:30:33 +00:00
Kazutaka YOKOTA
35e61cbd71 Add a new mechanism, cndbctl(), to tell the console driver that
ddb is entered.  Don't refer to `in_Debugger' to see if we
are in the debugger.  (The variable used to be static in Debugger()
and wasn't updated if ddb is entered via traps and panic anyway.)

- Don't refer to `in_Debugger'.
- Add `db_active' to i386/i386/db_interface.d (as in
  alpha/alpha/db_interface.c).
- Remove cnpollc() stub from ddb/db_input.c.
- Add the dbctl function to syscons, pcvt, and sio. (The function for
  pcvt and sio is noop at the moment.)

Jointly developed by: bde and me

(The final version was tweaked by me and not reviewed by bde.  Thus,
if there is any error in this commit, that is entirely of mine, not
his.)

Some changes were obtained from: NetBSD
2000-01-11 14:54:01 +00:00
Bruce Evans
66aeaaf280 Removed some more vestiges of ft.
Fixed some style bugs.
2000-01-09 17:13:35 +00:00
Peter Wemm
b6e5f28e51 Futher cleanup.. "device_print_prettyname(); printf()" -> device_printf()
It seems that the IDE system uses 0x3f6 for itself, which conflicts with
fdc's default 0x3f0-3f7 allocation range. Sigh.  Work around this.
Use bus_set_resource() rather than allocating specific areas, it makes
the code a little cleaner.

Based on work by:	dfr
2000-01-08 09:33:09 +00:00
Warner Losh
3b1782065f Merge most of FDC_YE into the mainline driver.
o Rename FDC_PCMCIA to FDC_NODMA to allow systems that don't have dma
  for floppies.
o Remove all but two FDC_YE ifdefs.  They aren't needed.
o Move defines for YE_DATAPORT to fdreg.h.

Not fixed:
o The pccard probe/attach.  However, motivated individuals can more
  easily add this now.

This is a merge of changes I've had in my tree for a long time.  These
fixes were tested on my VAIO with its normal floppy.  Please let me
know if I broke anything.

Prodded by: Peter Wemm <peter@freebsd.org>
2000-01-06 07:13:54 +00:00
Peter Wemm
b9da888fcb Make the evil broken pnpbios compensation slightly less evil.
This is the hack that compensates for when bios vendors "forget" to
include the fdc control (0x3f7) port in their io port mappings.  Instead
of accessing ports outside of a range allocated to a handle, simply
allocate the port directly.  It even shows up in the probe..
2000-01-05 17:42:43 +00:00
Peter Wemm
37286586ff Patch up some of the evilness left over from the early newbus porting.
In particular:
 - Don't leave resources allocated in the probe routine.  Allocate them
   during probe and release them.  Probe's job is to identify devices only.
 - Don't abuse the ivars pointer.. (!).  Create real ivars and use the
   proper access system.  (the bus_read_ivar method)
 - Don't add the children until attach() has successfully grabbed the
   hardware, otherwise there are potential leaks if attach fails.
2000-01-05 16:31:27 +00:00
Tor Egge
82916a1126 ISA device drivers use the ISA source interrupt number in locations where
the low level interrupt handler number should be used.  Change
setup_apic_irq_mapping() to allocate low level interrupt handler X (Xintr${X})
for any ISA interrupt X mentioned in the MP table.

Remove an assumption in the driver for the system clock (clock.c) that
interrupts mentioned in the MP table as delivered to IOAPIC #0 intpin Y
is handled by low level interrupt handler Y (Xintr${Y}) but don't assume
that low level interrupt handler 0 (Xintr0) is used.

Don't allocate two low level interrupt handlers for the system clock.
Reviewed by:	NOKUBI Hirotaka <hnokubi@yyy.or.jp>
2000-01-04 22:24:59 +00:00
Peter Wemm
7d674827c8 Recognize the CSC0101 ID for the Thinkpad series.
PR:		15633
Submitted by:	gibbs
1999-12-30 20:07:20 +00:00
Peter Wemm
c447342094 Change #ifdef KERNEL to #ifdef _KERNEL in the public headers. "KERNEL"
is an application space macro and the applications are supposed to be free
to use it as they please (but cannot).  This is consistant with the other
BSD's who made this change quite some time ago.  More commits to come.
1999-12-29 05:07:58 +00:00
KATO Takenori
6fb89845b4 Added following modes:
5in     HD 2 heads, 77 cylinders, 8 sectors/track, 1024 bytes/sector
 5/3.5in DD 2 heads, 80 cylinders, 8 sectors/track, 512 bytes/sector

Meanings of the rogrammer-readeble fd name were explained by Brian
Fundakowski Feldman and Peter Wemm in hackers list and NOKUBI
Hirotaka.

Reviewed by:	nyan
1999-12-28 07:38:38 +00:00
Peter Wemm
9928855f97 Recognize the GVC0505 (GVC 56k Faxmodem) as a sio device.
Obtained from: Dan J Fraser <dfraser@capybara.org> (for NetBSD)
1999-12-27 05:02:25 +00:00
Bruce Evans
0f19e631e2 Fixed races accessing the RTC. The races apparently caused
apm_default_resume() to sometimes set a very wrong time.
(1) Accesses to the RTC index and data registers were not atomic enough.
    Interrupts were not masked.  This was only good enough until an
    interrupt handler (rtcintr()) started accessing the RTC in FreeBSD-2.0.
(2) Access to the block of time registers in inittodr() was not atomic
    enough.  inittodr() has 244us to read the time registers.  Interrupts
    were not masked.  This was only good enough until something (apm)
    started calling inittodr() after boot time in FreeBSD-2.0.
The fix for (2) also makes the timecounter update more atomic, although
this is currently unimportant due to the low resolution of the RTC.

Problem reported by:	mckay
1999-12-25 15:30:31 +00:00
Peter Wemm
684fb19e34 Extract a list of extra isa pnp modem ID's from NetBSD and OpenBSD. Some
of these are bound to have a PNP05xx compatid, but there's no easy way to
tell.  Since it's just an ID list and uses the pnp header's description
strings rather than encoding strings here, it doesn't seem to be too
expensive to err on the safe side.
1999-12-21 09:16:03 +00:00
Joerg Wunsch
e34c71ea40 Add a flag to disable FIFO probing. The code seems to have a chance of
misdetecting FIFO capabilities, at least on my girlfriend's Thinkpad 755,
the driver doesn't work using the FIFO.

While i was at it, i (partially) fixed option FCC_YE since it would no
longer have compiled at all under -current.  I've also made an attempt
to document the device driver flags value (ab-)used internally by this
option.

RELENG_3 candidate, but with a slightly different patch there (will go
to jkh in email).
1999-12-21 08:33:03 +00:00
Peter Wemm
99c215c08b Add SUP2070 (Diamond SupraExpress 56i)
Submitted by:  Kenneth Wayne Culver <culverk@wam.umd.edu>

Add MOT4560
Obtained from: wollman
1999-12-20 20:31:23 +00:00
Peter Wemm
ec6e462d78 Remove references to register_intr() etc in comments. 1999-12-20 15:11:31 +00:00
Yoshihiro Takahashi
5e9136bbe2 Removed unnecessary include files. 1999-12-20 12:08:20 +00:00
Kazutaka YOKOTA
273157da59 - Add the device resume method. It supercedes the existing resume
routine which hooks the apm driver.
- Rename the PSM_HOOKAPM option to PSM_HOOKRESUME.
- Delete unnecessary #include.
1999-12-15 10:04:05 +00:00
Peter Wemm
d00177ef7e Make this kld'able (#include "joy.h" no longer required as there are no
references to NJOY any more after newbusification)
1999-12-12 20:39:35 +00:00
Warner Losh
0712c356a3 o Make pccard work at all by including card.h
o fix return type of sio_pccard_detach
o don't free softc in deatch, since that is done by newbus
o disconnect interrupt we used to have.  Add cookie to com so that we can
  tear down the interrupt on unload
o Set gone earlier, but likely doesn't matter

This makes sio pccards work again.  Cards that are active when ejects may
not work (but they might, softc goes away quickly).

These changes are unreviewed by bde.  I'll make any style changes he wants.
1999-12-10 08:19:19 +00:00
Peter Wemm
4246912f31 Fix a pair of silly warnings that I introduced (that would have been
nasty on an Alpha or some other sizeof(int) != sizeof(long) machine).
1999-12-06 17:52:20 +00:00
Peter Wemm
a2639a184d Add a truely evil workaround (hack!) for some unfortunate BIOS
programming practices.  It seems that newer fdc chips have an
alternative way of setting the transfer speed (including high speed
modes for floppy tape) that doesn't use the control register (which
we don't support - we use the old way only).  So, they (the BIOS
programmers) sometimes leave out the 0x3f6 control register from
the PnP ports descriptor(!!).  "Hey, it works with windows, so
what's the problem?" :-(  Anyway, this hack tries to compensate
for that.  This was discussed with dfr (who did the pnp attachment).
1999-12-06 06:59:09 +00:00
Peter Wemm
d0029cf5f3 Use bus_get_resource() instead of bus_get_resource_start() as the latter
returns "0" on failure, which is indistinguishable from (say) irq 0.  This
should stop a couple of stray messages that turn up.

Also, if a BUS_SETUP_INTR() fails with INTR_TYPE_FAST, try falling back to
a normal interrupt.  This might help pccard folks with a shared slot
interrupt.  This whole thing needs to be revisited.
1999-12-06 06:47:02 +00:00
Peter Wemm
2533e89e3b newbusify and port the joy driver to the Alpha. It now attaches to the
joystick port on PnP sound cards that have a suitable device ID on them.

Doug Rabson added timer code so it didn't have to beat on the isa timer.

Submitted by:   Takanori Watanabe <takawata@shidahara1.planet.sci.kobe-u.ac.jp>
1999-12-05 19:51:40 +00:00
Matthew N. Dodd
fe0d408987 Remove the 'ivars' arguement to device_add_child() and
device_add_child_ordered().  'ivars' may now be set using the
device_set_ivars() function.

This makes it easier for us to change how arbitrary data structures are
associated with a device_t.  Eventually we won't be modifying device_t
to add additional pointers for ivars, softc data etc.

Despite my best efforts I've probably forgotten something so let me know
if this breaks anything.  I've been running with this change for months
and its been quite involved actually isolating all the changes from
the rest of the local changes in my tree.

Reviewed by:	peter, dfr
1999-12-03 08:41:24 +00:00
Warner Losh
e09f49b6fa Fix the hang on card eject problem and maybe the hang on suspend
problem.

o Create new timeout routine so we don't detach the card inside a ISR
  but instead drop back to spl0 via a timeout of 0.
o Actually delete the child of the pccard device rather than just faking
  it badly.
o Fix sio, ed and ep to have pccard detach routines that are int rather
  than void.
o Fix ep and ed pccard detach routines to use if_detach rather than just
  if_down.  if_detach destroys the device, while if_down just marks it
  down.  In this incarnation of the pccard things, we map the disable
  the slot action to detach the driver, which removes the driver from the
  device tree.  When that is done, a panic would soon follow as the
  ifconfig tried to down the device.

Didn't fix:
o Should cache the pccard dev child's pointer in struct slot
o remove now unused parts of struct slot
o Any driver using softc after detach has been called.  sio's softc used
  to be statically allocated, so you could check sc->gone, but that is
  now gone.
o Didn't remove gone from softc of drivers that use the old pccard method.

Didn't test:
o ed driver changes
o sio driver changes on pccards
o suspend (no laptop or apm support on my desktop)
1999-12-01 07:38:54 +00:00
Andrew Gallatin
0e7e521cf3 Allow a DMA channel of 0. This gets the on-board mss audio device working
on Digital AlphaStations 200 and 500 machines (and probably others as well).

Submitted by: dfr
1999-11-22 14:30:41 +00:00
Peter Wemm
5ab0514321 Allow NULL for startp and/or countp in bus_get_resource() so that you can
get one of the two without having to use a dummy variable.
1999-11-20 14:56:55 +00:00
Peter Wemm
592b1c00b5 Argh, don't turn the IIR test on unless it's a pccard. These tests mess
up the subsequent probes.
1999-11-18 10:29:06 +00:00
Peter Wemm
1447114333 Merge some typo fixes from dev/sio/sio.c (siostop -> comstop)
Remove EXTRA_SIO/NSIOTOT and make it fully dynamic (from dev/sio/sio.c)
Make sio work for pccard here - pccardd doesn't activate interrupts
until after prove has succeeded.
Mark the initial reset of likely sio ports as broken as it depended on
config supplying a list of locations to probe, devices are now proved
standalone.
Optimize a bit of COM_NOAST4() logic.
Use bus_get_resource_start() etc rather than using isa-centric calls.
Reactivate the IIR_TXRDYBUG test, I've got a card here with it.
Try to be a bit smarter about activating interrupts (ie: don't panic
if polled)
Fix some style bugs that have crept in over time (there are still more).
1999-11-18 07:22:41 +00:00
Peter Wemm
8de0675c61 Tidy up a few loose ends in the fifo setup code.
Don't use NFDC as an arbitary limit, it is not required and goes against
using PnP fdc devices (eg: when PNPBIOS is turned on, the motherboard
devices (sio, fdc, etc etc) are detected via PnP, not config(8).)
1999-11-18 05:15:09 +00:00
Doug Rabson
ec22663bed Reorganise the code so that I can add custom identify drivers dynamically
during autoconfig to support strange hardware (such as the Yamaha DS-1)
which implements 'legacy' ISA devices as well as a PCI device. This will
allow the PCI driver for the YMF724 to add the legacy devices to the ISA
bus and will allow the PnP system to automatically allocate the resources
for those devices.
1999-11-11 16:48:00 +00:00
Doug Rabson
427ccf0071 Add code to support ISA PnP. 1999-11-11 08:48:40 +00:00
Peter Wemm
475ad603bb Use cdevsw_add() (temporarily) to avoid DEV_DRIVER_MODULE(), since the
make_dev()'s that are there are not enough.
1999-11-08 07:32:06 +00:00
Peter Wemm
1faa5a84a8 Use DEVICE_MODULE() directly instead of DEV_DRIVER_MODULE. psm.c uses
make_dev() already.
1999-11-08 07:29:23 +00:00
Mitsuru IWASAKI
29803c2003 i8254_restore is called from apm_default_resume() to reload
the countdown register.
this should not be necessary but there are broken laptops that
do not restore the countdown register on resume.
when it happnes, it messes up the hardclock interval and system clock,
which leads to the infamous "calcru: negative time" problem.

Submitted by:	kjc, iwasaki
Reviewed by:	Steve O'Hara-Smith <steveo@eircom.net> and committers.
Obtained from:	PAO3
1999-10-30 14:56:01 +00:00
Warner Losh
806338b15d Last change to pccard_nbk now obviates the need to check the name of
the device in question.
Also fix warnings on if_ep_pccard.c
1999-10-28 05:06:14 +00:00
Warner Losh
a57cd933dc Add newbus pccard attachment for sio. Some of this code was written
by Peter Wemm, but I've not merged all the changes he sent to me yet.
This has not been reviewed by bde, so I'm committing to resolve any
issues he has with this when he returns from FreeBSD CON 99.

I've had four reports of this working for them.  I've been able to
communicate to both my built in modem and a pccard modem with these
patches.
1999-10-25 02:46:52 +00:00
Doug Rabson
bb2b9030e8 * Add some verbose logging to the PnP parser and fix a couple of bugs.
* Move pnp_eisaformat() to pnp.c, declared in <isa/pnpvar.h>.
* Turn the pnpbios code into an enumerator for the isa bus. This allows
  all devices known to the bios to be probed automatically.

Currently the pnpbios code is dependant on the PNPBIOS option. As the code
is tested more and when more drivers are converted this will be made the
default. I have PnP changes in the wings for fdc, atkbd, psm, pcaudio, and
joy. Sio already works with pnpbios.
1999-10-14 21:03:03 +00:00
Doug Rabson
25afb89b1c * Add struct resource_list* argument to resource_list_alloc and
resource_list_release. This removes the dependancy on the
  layout of ivars.

* Move set_resource, get_resource and delete_resource from
  isa_if.m to bus_if.m.

* Simplify driver code by providing wrappers to those methods:

     bus_set_resource(dev, type, rid, start, count);
     bus_get_resource(dev, type, rid, startp, countp);
     bus_get_resource_start(dev, type, rid);
     bus_get_resource_count(dev, type, rid);
     bus_delete_resource(dev, type, rid);

* Delete isa_get_rsrc and use bus_get_resource_start instead.

* Fix a stupid typo in isa_alloc_resource reported by Takahashi
  Yoshihiro <nyan@FreeBSD.org>.

* Print a diagnostic message if we can't assign resources to a PnP
  device.

* Change device_print_prettyname() so that it doesn't print
  "(no driver assigned)-1" for anonymous devices.
1999-10-12 21:35:51 +00:00
Peter Wemm
e6daa4d087 Oh foo. I got carried away. :-( "joy.h" is used to size an array.
(Incidently, there is no bounds checking...)
1999-10-11 16:09:00 +00:00
Steve Price
004348c300 Add support for the USRobotics Courier V.Everything (USR0101) modem.
Submitted by:	Robert Blayzor <robert@superior.net>
1999-10-11 15:06:14 +00:00
Peter Wemm
90c7f2d6a2 Zap unneeded #include (found by phk)
Remove useless #include "joy.h"; #if NJOY > 0 - this is always true
if it's being compiled. config arranges this.
1999-10-11 14:53:46 +00:00
Doug Rabson
5b45337d82 Factor out the PnP resource parser so that it can be re-used by pnpbios
and acpi.

Reviewed by: msmith
1999-10-09 13:11:46 +00:00
Matthew N. Dodd
8cd350e08c Remove old copies. These files now live in src/sys/dev/buslogic 1999-10-09 06:28:18 +00:00
Daniel Eischen
3c6967023c Change pnp ID for the SupraExpress 56i Sp V.90 modem (logical ID
0x8024b04e) so that the cards description is used instead of overriding
it.  While I'm here, add an ID for the SUP2080 and the SUP2030.

PR:		kern/13983
Submitted by:	Kurt D. Zeilenga <Kurt@OpenLDAP.Org> (SUP2030)
		dfr  (rest of change)
Reviewed by:	dfr
1999-10-03 22:25:19 +00:00
Daniel Eischen
c0d3a0d572 Add logical device ID for the Diamond SupraExpress 56K PnP modem:
Vendor ID SUP2480 (0x8024b04e), Serial Number 0x00001334
  PnP Version 1.0, Vendor Version 0
  Device Description: SupraExpress 56i Sp V.90

Reviewed by:	dfr
1999-10-03 17:50:09 +00:00
Doug Rabson
a2e6dbb39d Disable pnp devices before running heuristic probes. This allows us to
'hide' those devices from those probes so that they don't get probed and
then re-probed later when the pnp probe is run.
1999-10-03 12:13:06 +00:00
Poul-Henning Kamp
d6a0e38a1b Remove five now unused fields from struct cdevsw. They should never
have been there in the first place.  A GENERIC kernel shrinks almost 1k.

Add a slightly different safetybelt under nostop for tty drivers.

Add some missing FreeBSD tags
1999-09-25 18:24:47 +00:00
Poul-Henning Kamp
ae8e1d08d7 This patch clears the way for removing a number of tty related
fields in struct cdevsw:

        d_stop          moved to struct tty.
        d_reset         already unused.
        d_devtotty      linkage now provided by dev_t->si_tty.

These fields will be removed from struct cdevsw together with
d_params and d_maxio Real Soon Now.

The changes in this patch consist of:

        initialize dev->si_tty in *_open()
        initialize tty->t_stop
        remove devtotty functions
        rename ttpoll to ttypoll
        a few adjustments to these changes in the generic code
        a bump of __FreeBSD_version
        add a couple of FreeBSD tags
1999-09-25 16:21:39 +00:00
Poul-Henning Kamp
11a0be87e3 Two more devstat_end_transaction() -> devstat_end_transaction_buf(). 1999-09-19 12:43:34 +00:00
Poul-Henning Kamp
2186cd9e8d Use devstat_end_transaction_buf() rather than Use devstat_end_transaction() 1999-09-18 21:30:27 +00:00
Doug Rabson
336dd1864d Parse resource descriptions which don't have START_DEPENDANT tags
correctly.  This fixes resource allocation for various PnP ed cards but
there are other problems which prevent that driver from working right.
1999-09-17 08:18:34 +00:00
Bruce Evans
887ba12fc5 Removed diskerr()'s unused d_name arg and updated callers. This fixes
warnings caused by the arg having the wrong type (not const enough).
The arg was also wrong (a full name instead of a short one) for calls
from from subr_diskmbr.c and pc98/diskslice_machdep.c.
1999-09-13 12:59:41 +00:00
Julian Elischer
85a219d201 Changes to centralise the default blocksize behaviour.
More likely to follow.

Submitted by: phk@freebsd.org
1999-09-09 19:08:44 +00:00
Peter Wemm
213fcefef2 Make it build, copy from dev/sio/sio.c:
isa_set_flags -> device_set_flags
isa_get_flags -> device_get_flags
1999-09-08 13:46:54 +00:00
Peter Wemm
f97d942bd0 Restore the old sio* - bruce can fix it himself. 1999-09-08 10:59:03 +00:00
Doug Rabson
062acdb7e7 Change isa_get/set_flags() to device_get/set_flags(). 1999-09-07 08:42:49 +00:00
Peter Wemm
e5174d14c5 Repo copy isa/sio* to dev/sio/sio* in preperation for extra bus methods
including pci.
Also, eliminate NSIOTOT and do it dynamically where it matters.
1999-09-06 14:06:23 +00:00
Peter Wemm
945f740363 Move the #if 0 to catch the card.h include and make sure it's zero. 1999-09-06 13:30:36 +00:00
Warner Losh
13264f28fb Start to disentangle the isa attachments from other buses. Partially
rewrite the pccard attachment case.  This is a work in progress, but
doesn't break the isa case.

I left the #if 0...#endif around the pccard stuff, at Peter's request,
so that normal users don't shoot themselves in the foot.

While I was here:
	o Indent a comment to the right location
	o Spell Unknown with a final 'n'.

Reviewed by: peter
1999-09-06 06:45:20 +00:00
Doug Rabson
2aadbbb680 Only set the description if there is one in the matching isa_pnp_id. 1999-09-04 14:43:35 +00:00
Doug Rabson
bd64ce72a8 Add USR3031 pnp id.
Submitted by: Steve Price <sprice@hiwaay.net>
1999-09-04 14:31:56 +00:00
Doug Rabson
1c3111dc06 Remove the last vestiges of the old pnp code in favour of the new one. 1999-09-03 20:01:08 +00:00
Peter Wemm
16e68fc605 Cosmetic tweak. Collect the fdc methods together and apart from the fd
methods so it's a little easier to seperate the two when reading the code.
1999-09-03 11:32:21 +00:00
Julian Elischer
7012bab988 Revert a bunch of contraversial changes by PHK. After
a quick think and discussion among various people some form of some of
these changes will probably be recommitted.

The reversion requested was requested by dg while discussions proceed.
PHK has indicated that he can live with this, and it has been agreed
that some form of some of these changes may return shortly after further
discussion.
1999-09-03 05:16:59 +00:00
Matthew N. Dodd
7612e4c122 This adds the i386 specific support for systems with a MicroChannel
Architecture bus.

Reviewed by: msmith
1999-09-03 02:04:28 +00:00
Peter Wemm
48ab255e6b s/LOGIGAL/LOGICAL/ 1999-09-02 05:13:01 +00:00
Doug Rabson
4249382df0 This represents essentially a complete rewrite of the ISA PnP code. The
new system is integrated with the ISA bus code more cleanly and allows
the future addition of more enumerators such as PnPBIOS and ACPI.

This commit also enables the new pcm driver since it is somewhat tied to
the new PnP code.
1999-09-01 20:53:43 +00:00
Peter Wemm
523df07b14 Sigh. Serves me right for testing against a modified tree (dfr's pnp
changes).  Doug changed these variables.  This should fix the isa_compat.c
breakage that phk reported.  (Sorry!)
1999-09-01 14:53:16 +00:00
Poul-Henning Kamp
c5b72c3d85 s/si_tty_tty/si_tty/g 1999-08-30 10:35:37 +00:00
Poul-Henning Kamp
02e1576966 Make bdev userland access work like cdev userland access unless
the highly non-recommended option ALLOW_BDEV_ACCESS is used.

(bdev access is evil because you don't get write errors reported.)

Kill si_bsize_best before it kills Matt :-)

Use the specfs routines rather having cloned copies in devfs.
1999-08-30 07:56:23 +00:00
Poul-Henning Kamp
9465bf4495 Initialize dev->si_bsize*, the floppy driver doesn't use dsopen(). 1999-08-28 08:10:13 +00:00
Peter Wemm
c3aac50f28 $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
Julian Elischer
ada9bd8cb8 Add PHK's make_dev() into more places where DEVFS used to be
hooked in directly.

Alpha change checked by: Matthew Jacob <mjacob@feral.com>
i4b ISDN changes checked by: Udo Schweigert <ust@cert.siemens.de>
    and Hellmuth Michaelis <hm@hcs.de>
PC98 changes checked by: Takahashi Yoshihiro <nyan@FreeBSD.org>
1999-08-27 07:26:26 +00:00
Poul-Henning Kamp
9dcbe2404a Convert DEVFS hooks in (most) drivers to make_dev().
Diskslice/label code not yet handled.

Vinum, i4b, alpha, pc98 not dealt with (left to respective Maintainers)

Add the correct hook for devfs to kern_conf.c

The net result of this excercise is that a lot less files depends on DEVFS,
and devtoname() gets more sensible output in many cases.

A few drivers had minor additional cleanups performed relating to cdevsw
registration.

A few drivers don't register a cdevsw{} anymore, but only use make_dev().
1999-08-23 20:59:21 +00:00
Kazutaka YOKOTA
800da3b22a - Remove cdevsw entry points in individual keyboard drivers;
instead, use generic entry points for all drivers.
- Eliminate bogus makedev().
- Eliminate softc in the lower drivers, as it is no longer necessary.

Submitted (95%) by: phk
1999-08-22 09:52:33 +00:00
Kazutaka YOKOTA
7d27f93ac4 Improve the detection code for GlidePoint. This is still a kludge,
but better than before...

PR: kern/13215
1999-08-22 06:11:52 +00:00
Kazutaka YOKOTA
e6d37e188f Recognize Interlink VersaPad. `Tap' action will be recognized
as the button 4.

Submitted by: Masachika ISHIZUKA <ishizuka@ish.org>
1999-08-17 12:14:13 +00:00
Justin T. Gibbs
086646f7c6 Properly set the alignment argument to bus_dma_tag_create(). If we
don't care about the alignment, set it to 1, meaning single byte alignment.
1999-08-16 01:52:21 +00:00
Poul-Henning Kamp
49ff4debd3 Spring cleaning around strategy and disklabels/slices:
Introduce BUF_STRATEGY(struct buf *, int flag) macro, and use it throughout.
please see comment in sys/conf.h about the flag argument.

Remove strategy argument from all the diskslice/label/bad144
implementations, it should be found from the dev_t.

Remove bogus and unused strategy1 routines.

Remove open/close arguments from dssize().  Pick them up from dev_t.

Remove unused and unfinished setgeom support from diskslice/label/bad144 code.
1999-08-14 11:40:51 +00:00
Poul-Henning Kamp
f1fe3bf115 make alpha compile again. 1999-08-09 11:02:45 +00:00
Poul-Henning Kamp
ce9edcf5b5 Merge the cons.c and cons.h to the best of my ability. alpha may or
may not compile, I can't test it.
1999-08-09 10:35:05 +00:00
Poul-Henning Kamp
4cb4c215e5 Allocate and register struct tty on the fly. 1999-08-08 20:25:14 +00:00
Joerg Wunsch
25d01e9527 Revert rev 1.149. Bruce convinced me that the problem already disappeared
by the fix in rev 1.120, which i wasn't immediately aware of.
1999-07-29 11:27:33 +00:00
Matthew N. Dodd
f4e3b1e7dd Fix a typo.
Back out a few lines that I haven't dealt with properly yet.

Snickered at by: Mike Smith
1999-07-29 01:51:49 +00:00
Brian Feldman
8799702cbc Remove XXX from the headers (broke the build, I'm betting.) 1999-07-29 01:20:47 +00:00
Matthew N. Dodd
15317dd875 Alter the behavior of sys/kern/subr_bus.c:device_print_child()
- device_print_child() either lets the BUS_PRINT_CHILD
	  method produce the entire device announcement message or
	  it prints "foo0: not found\n"

Alter sys/kern/subr_bus.c:bus_generic_print_child() to take on
the previous behavior of device_print_child() (printing the
"foo0: <FooDevice 1.1>" bit of the announce message.)

Provide bus_print_child_header() and bus_print_child_footer()
to actually print the output for bus_generic_print_child().
These functions should be used whenever possible (unless you can
just use bus_generic_print_child())

The BUS_PRINT_CHILD method now returns int instead of void.

Modify everything else that defines or uses a BUS_PRINT_CHILD
method to comply with the above changes.

	- Devices are 'on' a bus, not 'at' it.
	- If a custom BUS_PRINT_CHILD method does the same thing
	  as bus_generic_print_child(), use bus_generic_print_child()
	- Use device_get_nameunit() instead of both
	  device_get_name() and device_get_unit()
	- All BUS_PRINT_CHILD methods return the number of
	  characters output.

Reviewed by: dfr, peter
1999-07-29 01:03:04 +00:00
Mike Smith
e33bfde398 We're called too early to have any idea whether APM is going to be
active or not.  The only sane thing we can do here is assume that if
APM is supported it might be active at some point, and bail.

In reality, even this isn't good enough; regardless of whether we support
APM or not, the system may well futz with the CPU's clock speed and throw
the TSC off.  We need to stop using it for timekeeping except under
controlled circumstances.  Curse the lack of a dependable high-resolution
timer.
1999-07-28 20:22:30 +00:00
Kazutaka YOKOTA
828cb0403d Do not print resource values which are not set.
Reviewed by: dfr
1999-07-24 09:35:21 +00:00
Joerg Wunsch
409aadb1c9 Hack to work around a NULL pointer dereferencation that can be triggered
by removing a floppy that as being operated on.

The spagghetti is hardly understandable at all anymore, so i can't
100 % ascertain this is really the Right Thing to do, maybe our new
floppy driver maintainer, Jesus Monroy Jr can do this. :-))
1999-07-21 12:19:44 +00:00
Bruce Evans
e9ecccf8cb Updated acquire_timer2()'s state machine to work when the i8254 is
being used for timecounting.  Fixed a race or two in it.  Undisabled
it.

PR:		10455
1999-07-18 18:32:42 +00:00
Bruce Evans
ab64b6dc3c Don't let the machdep.tsc_freq sysctl proceed if the TSC is present
but broken, since tsc_timecounter is not initialised in that case,
and updating an uninitialised timecounter is fatal.

Fixed style bugs in the machdep.i8254_freq and machdep.tsc_freq
sysctls.

Reviewed by:	phk
1999-07-18 15:19:29 +00:00
Kazutaka YOKOTA
01533d852e Improve Logitech MouseMan+ protocol support. 1999-07-12 15:16:14 +00:00
Kazutaka YOKOTA
551e01b126 Implement a kludge for some wheeled mice for which infamous "psmintr:
out of sync..." messages is generated and the wheel movement is not
recognized.

The trick is found by Takashi Nishida.
1999-07-12 13:40:21 +00:00
Poul-Henning Kamp
03016f421b Remove cmaj and bmaj args from DEV_DRIVER_MODULE. 1999-07-04 14:58:56 +00:00
Kazutaka YOKOTA
a6c5d058bc Allocate the port resource when attaching the keyboard controller,
rather than when the individual child device is attached.
1999-06-29 17:35:09 +00:00
Kazutaka YOKOTA
f94ae09657 Skip the device if it is disabled, when searching for a serial port
to be used for the kernel console in sccnprobe().
1999-06-29 17:34:16 +00:00
Peter Wemm
eb7fc512af Don't #include i386/isa/isa_dma.h - it's in isa/isavar.h now. This
driver is probably not far from being MI now anyway.
1999-06-28 09:19:58 +00:00
Peter Wemm
e66b7bac41 Shut up gcc. 1999-06-27 09:08:48 +00:00
Kirk McKusick
67812eacd7 Convert buffer locking from using the B_BUSY and B_WANTED flags to using
lockmgr locks. This commit should be functionally equivalent to the old
semantics. That is, all buffer locking is done with LK_EXCLUSIVE
requests. Changes to take advantage of LK_SHARED and LK_RECURSIVE will
be done in future commits.
1999-06-26 02:47:16 +00:00
Kazutaka YOKOTA
ffc1d9bd45 Declare the correct size of softc and fix sc_get_softc(). 1999-06-24 09:06:48 +00:00
Brian Feldman
9840e7cb5a This commit gives support for the Rise mP6 CPU. It has two changes:
1. Rise is recognized in identdcpu.c.
	2. The TSC is not written to. A workaround for the CPU bug is being
	   applied to clock.c (the bug being that the mP6 has TSC enabled
	   in its CPUID-capabilities, but it only supports reading it. If we
	   try to write to it (MSR 16), a GPF occurs.) The new behavior is that
	   FreeBSD will _not_ zero the TSC. Instead, we do a bit of 64-bit
	   arithmetic.

Reviewed by:	msmith
Obtained from:	unfurl & msmith
1999-06-24 03:48:25 +00:00
Kazutaka YOKOTA
6e8394b8ba The second phase of syscons reorganization.
- Split syscons source code into manageable chunks and reorganize
  some of complicated functions.

- Many static variables are moved to the softc structure.

- Added a new key function, PREV.  When this key is pressed, the vty
  immediately before the current vty will become foreground.  Analogue
  to PREV, which is usually assigned to the PrntScrn key.
  PR: kern/10113
  Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de>

- Modified the kernel console input function sccngetc() so that it
  handles function keys properly.

- Reorganized the screen update routine.

- VT switching code is reorganized.  It now should be slightly more
  robust than before.

- Added the DEVICE_RESUME function so that syscons no longer hooks the
  APM resume event directly.

- New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING,
  SC_NO_HISTORY and SC_NO_SYSMOUSE.
  Various parts of syscons can be omitted so that the kernel size is
  reduced.

  SC_PIXEL_MODE
  Made the VESA 800x600 mode an option, rather than a standard part of
  syscons.

  SC_DISABLE_DDBKEY
  Disables the `debug' key combination.

  SC_ALT_MOUSE_IMAGE
  Inverse the character cell at the mouse cursor position in the text
  console, rather than drawing an arrow on the screen.
  Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG)

  SC_DFLT_FONT
  makeoptions "SC_DFLT_FONT=_font_name_"
  Include the named font as the default font of syscons.  16-line,
  14-line and 8-line font data will be compiled in.  This option replaces
  the existing STD8X16FONT option, which loads 16-line font data only.

- The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c.

- The video driver provides a set of ioctl commands to manipulate the
  frame buffer.

- New kernel configuration option: VGA_WIDTH90
  Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60.  These
  modes are mot always supported by the video card.
  PR: i386/7510
  Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx.

- The header file machine/console.h is reorganized; its contents is now
  split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h
  (another new file).  machine/console.h is still maintained for
  compatibility reasons.

- Kernel console selection/installation routines are fixed and
  slightly rebumped so that it should now be possible to switch between
  the interanl kernel console (sc or vt) and a remote kernel console
  (sio) again, as it was in 2.x, 3.0 and 3.1.

- Screen savers and splash screen decoders
  Because of the header file reorganization described above, screen
  savers and splash screen decoders are slightly modified.  After this
  update, /sys/modules/syscons/saver.h is no longer necessary and is
  removed.
1999-06-22 14:14:06 +00:00
Peter Wemm
20510b2017 Use the proper interfaces to find if a device is enabled, don't dig into
the bus mechanism's private internals!
1999-06-20 13:10:09 +00:00
Greg Lehey
89bf63adaa sioprobe: Don't try to initialize disabled ports. In particular,
attempting to initialize sio3 caused problems with ATI video boards,
which cleverly share the I/O space.

PR: kern/12295
1999-06-19 08:14:56 +00:00
Kirk McKusick
5e1a20fd26 COM_LLCONSOLE should over-ride COM_DEBUGGER request. 1999-06-15 22:15:10 +00:00
Peter Wemm
4961913d45 Quieten the bt_isa_probe() messages since they get a bit much when
the isa probe has gone hunting for a card on it's own.
1999-06-03 20:56:09 +00:00
Kazutaka YOKOTA
2b9e6c7549 Fix PS/2 MouseMan+ protocol. We have been looking at a wrong place
for the sign bit for roller movement!
1999-06-03 12:42:10 +00:00
Doug Rabson
a97c75b7ea * Change include file locations.
* Fix some misunderstandings about the return value of resource_int_value().
* Make it build on alpha (doesn't work yet...)
1999-05-31 18:39:17 +00:00
Doug Rabson
3bfc7e5928 Remove fd driver from its old home and change files which include rtc.h
to account for its new location.
1999-05-31 18:36:14 +00:00
Poul-Henning Kamp
2447bec829 Simplify cdevsw registration.
The cdevsw_add() function now finds the major number(s) in the
struct cdevsw passed to it.  cdevsw_add_generic() is no longer
needed, cdevsw_add() does the same thing.

cdevsw_add() will print an message if the d_maj field looks bogus.

Remove nblkdev and nchrdev variables.  Most places they were used
bogusly.  Instead check a dev_t for validity by seeing if devsw()
or bdevsw() returns NULL.

Move bdevsw() and devsw() functions to kern/kern_conf.c

Bump __FreeBSD_version to 400006

This commit removes:
        72 bogus makedev() calls
        26 bogus SYSINIT functions

if_xe.c bogusly accessed cdevsw[], author/maintainer please fix.

I4b and vinum not changed.  Patches emailed to authors.  LINT
probably broken until they catch up.
1999-05-31 11:29:30 +00:00
Poul-Henning Kamp
3faff79c9e The PPSAPI group defines the polarity in draft 3, we guessed it wrong. 1999-05-31 06:57:31 +00:00
Poul-Henning Kamp
4e2f199e0c This commit should be a extensive NO-OP:
Reformat and initialize correctly all "struct cdevsw".

        Initialize the d_maj and d_bmaj fields.

        The d_reset field was not removed, although it is never used.

I used a program to do most of this, so all the files now use the
same consistent format.  Please keep it that way.

Vinum and i4b not modified, patches emailed to respective authors.
1999-05-30 16:53:49 +00:00
Doug Rabson
46e1f231cd Simplistic pnp support. Needs more ids to be added. 1999-05-30 11:14:39 +00:00
Doug Rabson
f7f2df54bb No support for pnp yet. 1999-05-30 11:12:30 +00:00
Doug Rabson
d384956496 No support for pnp devices yet. 1999-05-30 11:10:10 +00:00
Doug Rabson
cfa84f4631 * Add ivars for ISA pnp.
* Move isa_dma* declarations to isavar.h.
* Add a method ISA_DELETE_RESOURCE() to the ISA interface.
* Tidy up include protection defines.
1999-05-30 11:02:17 +00:00
Poul-Henning Kamp
6deb5a62cc Stop the TSC from being used as timecounter on K5/step0 machines. 1999-05-29 06:57:55 +00:00
Bruce Evans
b50641ef9c Fixed glitches (jumps) of about 1/HZ seconds for the i8254 timecounter.
The old version only worked right when the time was read strictly
more often than every 1/HZ seconds, but we only guarantee reading
it every (1/HZ + epsilon) seconds.  Part of rev.1.126-1.127 attempted
to fix this but didn't succeed.  Detect counter rollover using the
heuristic from the old version of microtime() with additional
complications for supporting calls from fast interrupt handlers.
This works provided i8254 interrupts are not delayed by more than
1/(2*HZ) seconds.

This needs more comments, and cleanups for the SMP case, and more
testing of the SMP case before it is merged into RELENG_3.

Tested by:		jhay
1999-05-28 14:08:59 +00:00
Doug Rabson
0476a4d4ff Allow a sio port with its flags set to DEBUGGER+LLCONSOLE to be used for
gdb. This allows the sio probe for that port to be disabled which stops
it from confusing the debugger.
1999-05-28 09:37:11 +00:00
Doug Rabson
bea6af4d31 * Change device_add_child_after() to device_add_child_ordered() which is
easier to use and more flexible.
* Change BUS_ADD_CHILD to take an order argument instead of a place.
* Define a partial ordering for isa devices so that sensitive devices are
  probed before non-sensitive ones.
1999-05-28 09:25:16 +00:00
Doug Rabson
6f50cfb43a Use the resource apis to manipulate resources. 1999-05-22 15:47:34 +00:00
Doug Rabson
f78030e22d Don't use BUS_WRITE_IVAR to manipulate resources. 1999-05-22 15:45:47 +00:00
Doug Rabson
a3be63b3ce * Factor out the common code between the isa bus drivers for i386 and alpha.
* Re-work the resource allocation code to use helper functions in subr_bus.c.
* Add simple isa interface for manipulating the resource ranges which can be
  allocated and remove the code from isa_write_ivar() which was previously
  used for this purpose.
1999-05-22 15:18:28 +00:00
Kazutaka YOKOTA
ec6948ccea Slight reorganization of internal interface in the keyboard controller
driver.
1999-05-18 11:33:14 +00:00
Doug Rabson
6c2e3dde8c * Define a new static method DEVICE_IDENTIFY which is called to add device
instances to a parent bus.
* Define a new method BUS_ADD_CHILD which can be called from DEVICE_IDENTIFY
  to add new instances.
* Add a generic implementation of DEVICE_PROBE which calls DEVICE_IDENTIFY
  for each driver attached to the parent's devclass.
* Move the hint-based isa probe from the isa driver to a new isahint driver
  which can be shared between i386 and alpha.
1999-05-14 11:22:47 +00:00
Bruce Evans
f86e40770a Fixed reset handling for motor off resets. I first fixed this together
with other reset handling in rev.1.83 but broke it in rev.1.120.  The
breakage didn't seem to cause any problems even on the system which had
problems ("extra" interrupts and botched handling thereof) before rev.1.83.
It only affects multi-floppy systems anyway.
1999-05-11 04:58:30 +00:00
Doug Rabson
1d3710bdf3 Adjust console stuff now that makedev is no longer a macro. 1999-05-10 14:01:35 +00:00
Peter Wemm
3bab4ac5a1 For what it's worth, idelayed is declared as a volatile in the headers,
and even though it's not used in this file make it a volatile here too.
1999-05-09 23:32:29 +00:00
Peter Wemm
e2eb6a14cd Remove hackish foot protection.. If you ask for an atkbd on an isa bus
rather than on the keyboard controller, you will get it.. (and shoot your
feet)
1999-05-09 20:45:53 +00:00
Peter Wemm
d1935ba94c Make COM_ESP and COM_MULTIPORT compile for LINT. It might even work.. 1999-05-09 20:35:02 +00:00
Peter Wemm
1d361692a7 Optimize out a couple of places where com_addr() is used twice in a row,
although this is pretty trivial.  devclass_get_softc() is a tad more
expensive than the old com_addr() implementation.  If Bruce is really
worried about the cost of this, it could always be changed so that the
softc pointer is stored in a local array again.
1999-05-09 16:56:38 +00:00
Peter Wemm
b6dc33dbf2 Delete the #if'ed out old isa bus probe/attach routines 1999-05-09 16:39:24 +00:00
Peter Wemm
6f42b336a5 Move opt_sio.h options to conf/options and activate in isa/sio.c 1999-05-09 13:10:49 +00:00
Poul-Henning Kamp
52400704e9 Unconfuse DEV_MODULE() and DEV_DRIVER_MODULE() about the difference between
a major number for a dev_t.
1999-05-09 13:00:50 +00:00
Poul-Henning Kamp
3000820ae0 add some amount of sanity to the way the gdb stuff finds its device.
I'm not too happy about the result either, but at least it has less
chance of backfiring.

This particular feature could be called "a mess" without offending
anybody.
1999-05-09 10:51:13 +00:00
Poul-Henning Kamp
1a4dd80a43 siocngetc & putc can be staticized. 1999-05-09 10:28:50 +00:00
Kazutaka YOKOTA
d1a67a9435 Revive APM hooking code for i386 arch now that the same source file is
used for both i386 and alpha (the code was in sys/i386/isa/psm.c, but
was disabled when ported to alpha.)
1999-05-09 04:58:35 +00:00
Doug Rabson
566643e39e Move the declaration of the interrupt type from the driver structure
to the BUS_SETUP_INTR call.
1999-05-08 21:59:43 +00:00
Peter Wemm
6d9ecc2ba7 Print the child IRQ on it's identification line. 1999-05-08 20:25:38 +00:00
Peter Wemm
05170bddd7 Brace initializers to avoid a warning. 1999-05-08 20:20:18 +00:00
Peter Wemm
4fdff1649a GC unused #define id_physid id_scsiid 1999-05-08 18:13:15 +00:00
Peter Wemm
929f6b0a11 Slightly increase the visibility of the isa_wrap_old_drivers() stuff. It
would be a shame to pollute the new isa.c with the isa_device.h defs.
1999-05-08 18:11:04 +00:00
Kirk McKusick
5c92a5b353 Get rid of extern declarations on gdb stuff so systems compiled without
DDB will compile. Warn users that try to use GDB without specifying a GDB
port in their configuration file.
1999-05-07 23:08:23 +00:00
Matt Jacob
49c36ff4f3 fix it so it compiles on alpha again 1999-05-07 17:52:01 +00:00
Poul-Henning Kamp
46eede0058 Continue where Julian left off in July 1998:
Virtualize bdevsw[] from cdevsw.  bdevsw() is now an (inline)
        function.

        Join CDEV_MODULE and BDEV_MODULE to DEV_MODULE (please pay attention
        to the order of the cmaj/bmaj arguments!)

        Join CDEV_DRIVER_MODULE and BDEV_DRIVER_MODULE to DEV_DRIVER_MODULE
        (ditto!)

(Next step will be to convert all bdev dev_t's to cdev dev_t's
before they get to do any damage^H^H^H^H^H^Hwork in the kernel.)
1999-05-07 10:11:40 +00:00
Poul-Henning Kamp
c48d17750f Introduce two functions: physread() and physwrite() and use these directly
in *devsw[] rather than the 46 local copies of the same functions.

(grog will do the same for vinum when he has time)
1999-05-07 07:03:47 +00:00
Kirk McKusick
e244fe31d6 Generalize to allow any serial port to be used as the GDB port.
Mark the GDB port in the config file with flags 0x80. Currently
only the sio driver checks these flags and sets up a GDB port,
but adding similar code to other serial drivers would be easy.
For backward compatibility, if an sio port is marked as the console
and no port is marked as the gdb port, the GDB port will be mapped
to the console port. This hack should go away at some point.
1999-05-07 06:50:41 +00:00
Poul-Henning Kamp
b0eeea2042 remove b_proc from struct buf, it's (now) unused.
Reviewed by:	dillon, bde
1999-05-06 20:00:34 +00:00
Peter Wemm
d5558c001a Fix up a few easy 'assignment used as truth value' and 'suggest parens
around && within ||' type warnings.  I'm pretty sure I have not masked
any problems here, I've committed real problem fixes seperately.
1999-05-06 18:44:42 +00:00
Peter Wemm
522c197d02 The joypart() macro had a precedence bug. Add seatbelts for UNIT() too. 1999-05-06 18:39:32 +00:00
Peter Wemm
edfdec1910 Disable FDC_YE - it's broken at present (breaking LINT) and awaiting some
pccard fixups.
Make DEVFS compile, it breaks LINT.
1999-05-02 20:38:08 +00:00
Dmitrij Tejblum
604359cf9b s/static foo_devsw_installed = 0;/static int foo_devsw_installed;/.
(Edited automatically)
1999-04-28 10:54:24 +00:00
Poul-Henning Kamp
f711d546d2 Suser() simplification:
1:
  s/suser/suser_xxx/

2:
  Add new function: suser(struct proc *), prototyped in <sys/proc.h>.

3:
  s/suser_xxx(\([a-zA-Z0-9_]*\)->p_ucred, \&\1->p_acflag)/suser(\1)/

The remaining suser_xxx() calls will be scrutinized and dealt with
later.

There may be some unneeded #include <sys/cred.h>, but they are left
as an exercise for Bruce.

More changes to the suser() API will come along with the "jail" code.
1999-04-27 11:18:52 +00:00
Poul-Henning Kamp
0bb2226a4d Make the machdep.i8254_freq and machdep.tsc_freq sysctls modify the
timecounter as well

Asked for by:	bde, jhay
1999-04-25 09:00:00 +00:00
Dmitrij Tejblum
b079102dc5 Modify the non-i386 version of disable_intr() and enable_intr() so that they
don't produce a warning on every use.
1999-04-24 10:41:21 +00:00
Peter Wemm
8e51a153aa Revert part of 1.9; we don't need to reset the port after release now that
the isa bus doesn't clear the hints at that point.
1999-04-24 06:48:27 +00:00
Peter Wemm
9d0e5f96b0 Return the port size from the probe.
"ppc0 at port 0x378 irq 7 drq 3 on isa0" becomes
"ppc0 at port 0x378-0x37f irq 7 drq 3 on isa0"
1999-04-22 13:10:43 +00:00
Peter Wemm
8528f91719 oops, SMP was missing includes for a typedef. 1999-04-21 07:41:40 +00:00
Peter Wemm
54a8c69347 Stage 1 of a cleanup of the i386 interrupt registration mechanism.
Interrupts under the new scheme are managed by the i386 nexus with the
awareness of the resource manager.  There is further room for optimizing
the interfaces still.  All the users of register_intr()/intr_create()
should be gone, with the exception of pcic and i386/isa/clock.c.
1999-04-21 07:26:30 +00:00
Peter Wemm
0f6bc47029 Make the bt isa driver work..
- fix cut/paste problem. :-)
- don't forget to call isa_dmacascade()
- reset the port after we release resources.

That last one is a trap to watch out for..  The isa bus driver uses the
same port/irq/mem/etc variables for the initial probe hints as it does
for allocation/deallocation tracking.  Releasing a resource clears the
variable and then you loose the hint during attach.. (ouch!)
1999-04-18 19:08:28 +00:00
Peter Wemm
a49a3d4433 Implement an EISA new-bus framework. The old driver probe mechanism
had a quirk that made a shim rather hard to implement properly and it was
just easier to convert the drivers in one go.  The changes to the
buslogic driver go beyond just this - the whole driver was new-bus'ed
including pci and isa.  I have only tested the EISA part of this so far.

Submitted by:	 Doug Rabson <dfr@nlsystems.com>
1999-04-18 15:50:35 +00:00
Peter Wemm
25f4337454 Merge revs 1.57 and 1.60 of i386/isa/psm.c 1999-04-18 15:12:11 +00:00
Peter Wemm
f3a865fb76 Merge missing changes from i386/isa/sioreg.h (PC98 related) 1999-04-18 14:37:47 +00:00
Peter Wemm
0dd2ac5462 Tidy up a few things left over from the conversion from i386/isa/sio.c.
Leave two #if 0'd notes about the way things used to be done for reference.
1999-04-18 14:35:28 +00:00
Doug Rabson
e2117e478b Register sio interrupts as fast (fixing some silo overflow messages). 1999-04-18 14:11:01 +00:00
Peter Wemm
007e69315a Merge up to rev 1.234 (nice revision number!) of i386/isa/sio.c. 1999-04-17 01:02:27 +00:00
Peter Wemm
c976cd3849 Merge up to rev 1.226 of i386/isa/sio.c 1999-04-17 00:37:01 +00:00
Peter Wemm
6e694ebb8d Copy across some apparently missing cleanups from i386/isa/vga_isa.c 1999-04-16 23:54:24 +00:00
Peter Wemm
c2c75d780e As a temporary anti-foot-shooting measure, don't let the user attach
the atkbd device to isa, as was in the old (and 3.x) GENERIC config.
1999-04-16 23:39:15 +00:00
Peter Wemm
6182fdbda8 Bring the 'new-bus' to the i386. This extensively changes the way the
i386 platform boots, it is no longer ISA-centric, and is fully dynamic.
Most old drivers compile and run without modification via 'compatability
shims' to enable a smoother transition.  eisa, isapnp and pccard* are
not yet using the new resource manager.  Once fully converted, all drivers
will be loadable, including PCI and ISA.

(Some other changes appear to have snuck in, including a port of Soren's
 ATA driver to the Alpha.  Soren, back this out if you need to.)

This is a checkpoint of work-in-progress, but is quite functional.

The bulk of the work was done over the last few years by Doug Rabson and
Garrett Wollman.

Approved by:	core
1999-04-16 21:22:55 +00:00
Poul-Henning Kamp
bbca5c9c2c failled spell-check 1999-04-06 21:15:18 +00:00
Peter Wemm
2ada239c12 Use reference counted PHOLD/PRELE rather than the P_PHYSIO flag. 1999-04-06 03:06:51 +00:00
Kazutaka YOKOTA
e9deda23ae Keyboard driver update in preparation for the USB keyboard driver.
- Refined internal interface in keyboard drivers so that:
  1. the side effect of device probe is kept minimal,
  2. polling mode function is added,
  3. and new ioctl and configuration options are added (see below).

- Added new ioctl: KDSETREPEAT
  Set keyboard typematic rate.  There has existed an ioctl command,
  KDSETRAD, for the same purpose.  However, KDSETRAD is dependent on
  the AT keyboard.  KDSETREPEAT provides more generic interface.
  KDSETRAD will still be supported in the atkbd driver.

- Added new configuration options:
  ATKBD_DFLT_KEYMAP
  Specify a keymap to be used as the default, built-in keymap.
  (There has been undocumented options, DKKEYMAP, UKKEYMAP, GRKEYMAP,
  SWKEYMAP, RUKEYMAP, ESKEYMAP, and ISKEYMAP to set the default keymap.
  These options are now gone for good.  The new option is more general.)

  KBD_DISABLE_KEYMAP_LOADING
  Don't allow the user to change the keymap.
1999-03-10 10:36:53 +00:00
Justin T. Gibbs
4297664797 Pull 'ISA style' probe where interrupt information is determined through
commands sent to card, into the base driver module.  It is now used for
EISA board probes too.
1999-03-08 21:32:59 +00:00
Nicolas Souchu
5174ad8b76 More appropriate fix to the id_irq read during probe 1999-02-14 22:02:47 +00:00
Nicolas Souchu
a1142115dd The way the interrupt id was calculated was wrong and the lpt
driver was thinking irq was enabled although it wasn't.
This case was particular to a no-interrupt static configuration.

Reported by: "Norman C. Rice" <nrice@emu.sourcee.com>
1999-02-14 17:09:59 +00:00
Nicolas Souchu
3ab971c14f Fix interrupt handling with DMA. Bit nFault was tested in the control reg.
instead of the status reg. and check ECP mode before considering nFault.
1999-02-14 12:03:35 +00:00
Kenneth D. Merry
2a888f938e Add a prioritization field to the devstat_add_entry() call so that
peripheral drivers can determine where in the devstat(9) list they are
inserted.

This requires recompilation of libdevstat, systat, vmstat, rpc.rstatd, and
any ports that depend on the devstat code, since the size of the devstat
structure has changed.  The devstat version number has been incremented as
well to reflect the change.

This sorts devices in the devstat list in "more interesting" to "less
interesting" order.  So, for instance, da devices are now more important
than floppy drives, and so will appear before floppy drives in the default
output from systat, iostat, vmstat, etc.

The order of devices is, for now, kept in a central table in devicestat.h.
If individual drivers were able to make a meaningful decision on what
priority they should be at attach time, we could consider splitting the
priority information out into the various drivers.  For now, though, they
have no way of knowing that, so it's easier to put them in an easy to find
table.

Also, move the checkversion() call in vmstat(8) to a more logical place.

Thanks to Bruce and David O'Brien for suggestions, for reviewing this, and
for putting up with the long time it has taken me to commit it.  Bruce did
object somewhat to the central priority table (he would rather the
priorities be distributed in each driver), so his objection is duly noted
here.

Reviewed by:	bde, obrien
1999-02-10 00:04:13 +00:00
Kazutaka YOKOTA
3dec8614fe Oops, the last commit contained a wrong patch. This is the correct one. 1999-02-05 12:58:40 +00:00
Kazutaka YOKOTA
1c27745f73 - Don't assume the line length in the video memory is always the same as
the screen width.
- Store the current video mode information in the `video_adapter' struct.
- The size of the `v_offscreensize' field in the VESA mode information
  block is u_int16, not u_int8.
1999-02-05 11:52:13 +00:00
Nicolas Souchu
c9ab07382c Fix compile warnings about missing braces around static initialization of unions. 1999-01-31 11:52:04 +00:00
Nicolas Souchu
20240fa3ad Distinguish EPP address/data register. Add EPP address register access to ppi.
Change microseq offsets. Previously, offsets of the program counter where
added to the index of the current microinstruction. Make them rely on the
index of the next executed microinstruction.

Suggested by: Luigi Rizzo <luigi@labinfo.iet.unipi.it>
1999-01-30 15:35:39 +00:00
Poul-Henning Kamp
4e2d2aa1cd Use suser() to check for super user rather than examining cr_uid directly.
Use TTYDEF_SPEED rather than 9600 a couple of places.

Reviewed by:	bde, with a few grumbles.
1999-01-30 12:17:38 +00:00
Doug Rabson
8a99777019 Update the alpha port to use the new syscons.
Submitted by: Kazutaka YOKOTA <yokota@zodiac.mech.utsunomiya-u.ac.jp> (partly)
1999-01-23 16:53:30 +00:00
Matt Jacob
89297ac4d1 I guess this is now a legacy driver (for alpha only right now).
At any rate, some changes had to be made so that alpha would compile.
1999-01-20 18:27:31 +00:00
Peter Wemm
d17e4ee67d Update the pccard hooks to use a module style declaration instead. 1999-01-19 00:21:53 +00:00
Bruce Evans
e93e63cb39 Fixed corruption of the fd buffer queue. Once upon a time, the active
buffer had to be left on the head of the queue for [bufq]disksort()
to sort against.  This isn't right for devices that can support multiple
active i/o's, and only the fd driver did it.  "Fixing" this in rev.1.36
of ufs_disksubr.c broke the fd driver in much the same way as rev.1.52
of <sys/buf.h> broke it (see rev.1.119).

Bug reported and fix tested by:	dt
1999-01-15 09:15:27 +00:00
Nicolas Souchu
a7006f894f Fix broken low level ppb_rxxx() return type: char becomes u_char.
Submitted by: Bruce Evans <bde@zeta.org.au>

Some ppb bootup printfs simplified.
1999-01-10 16:41:14 +00:00
Nicolas Souchu
bc35c17446 Major ppbus commit with:
+ ECP parallel port chipset FIFO detection
	+ DMA+FIFO parallel I/O handled as chipset specific
	+ nlpt updated in order to use the above enhanced parallel I/O.
	  Use 'lptcontrol -e' to use enhanced I/O
	+ Various options documented in LINT
	+ Full IEEE1284 NIBBLE and BYTE modes support. See ppbus(4) for
	  an overview of the IEEE1284 standard
	+ Detection of PnP parallel devices at boot
	+ Read capability added to nlpt driver to get IEEE1284 compliant
	  printer status with a simple 'cat /dev/lpt0'
	+ IEEE1284 peripheral emulation added to BYTE mode. Two computers
	  may dialog according to IEEE1284 signaling method.
	  See PERIPH_1284 option and /sys/dev/ppbus/ppi.c

All this code is supposed to provide basic functions for IEEE1284 programming.
ppi.c and nlpt.c may act as examples.
1999-01-10 12:04:56 +00:00
Kazutaka YOKOTA
cc7495b5c1 Move IO_PSMSIZE from kbdio.h to isareg.h.
While I am here, correct the values for IO_MDASIZE and IO_CGASIZE; they
  should be 12 rather than 16.
1999-01-06 05:49:30 +00:00
Tim Vanderhoek
dea9268b70 Silence -Wtrigraph.
Submitted by:	Bradley Dunn <bradley@dunn.org>  (pr: kern/8817)
1998-12-30 00:37:44 +00:00
Poul-Henning Kamp
fc47545ec3 Pre 3.0 branch cleanup casualty #6: ft 1998-12-27 13:40:57 +00:00
Bruce Evans
ff9607b070 Fixed LINT breakage in previous commit. Option FDC_YE enabled a
syntax error.  Options FDC_YE and DEVFS together enabled references
to a nonexistent variable and calls of a nonexistent function.
1998-12-14 16:29:58 +00:00
Stephen McKay
2619394c7c Fix tabs that should have been spaces. Some were in kernel error messages. 1998-12-14 13:30:29 +00:00
Steve Price
921543cf2f Add support for another 3COM/USR PNP modem, USR3031. 1998-12-13 23:12:54 +00:00
Warner Losh
69acd21dfd Add support for the YE-Data external PCMCIA floppy driver. This
floppy is used on the toshiba Libretto line of subnotebook computers.
It differs from a normal floppy in that you must use PIO rather than
DMA to transfer the data.

To enable this, you must add options "FDC_YE" to your kernel.  I don't
have a machine that has a floppy and a pcmcia slot to test to make
sure that this doesn't impact normal floppy units, so I've left this as
an option.

I have ported this to -current and made an attempt to ensure that the
indentation conforms to style(9), aka the bruce filter.

Reviewed by:	nate, markm
Submitted by:	David Horwitt (dhorwitt@ucsd.edu)
1998-12-12 08:16:01 +00:00
Eivind Eklund
2ae353f9a7 Rename one of the two devfs_link's to devfs_makelink. 1998-12-10 19:57:01 +00:00
Archie Cobbs
f1d19042b0 The "easy" fixes for compiling the kernel -Wunused: remove unreferenced static
and local variables, goto labels, and functions declared but not defined.
1998-12-07 21:58:50 +00:00
Archie Cobbs
2127f26023 Examine all occurrences of sprintf(), strcat(), and str[n]cpy()
for possible buffer overflow problems. Replaced most sprintf()'s
with snprintf(); for others cases, added terminating NUL bytes where
appropriate, replaced constants like "16" with sizeof(), etc.

These changes include several bug fixes, but most changes are for
maintainability's sake. Any instance where it wasn't "immediately
obvious" that a buffer overflow could not occur was made safer.

Reviewed by:	Bruce Evans <bde@zeta.org.au>
Reviewed by:	Matthew Dillon <dillon@apollo.backplane.com>
Reviewed by:	Mike Spengler <mks@networkcs.com>
1998-12-04 22:54:57 +00:00
Doug Rabson
08b6a4cbee * Add hooks to allow the X server to access I/O ports and memory.
* Update drivers to the latest version of the bus interface.

The ISA drivers' use of the new resource api is minimal.  Garrett has
some much cleaner drivers which should be more easily shared between
i386 and alpha.  This has only been tested on cia based machines.  It
should work on lca and apecs but I might have broken something.
1998-11-15 18:25:17 +00:00
Justin T. Gibbs
3c1cabf7a2 Fix probes when a port address is specified. 1998-11-10 06:44:54 +00:00
Doug Rabson
66d22cfe03 Port the ps/2 mouse driver to the alpha. 1998-11-08 18:43:03 +00:00
Doug Rabson
7095ee912b * Fix a couple of places in the device pager where an address was
truncated to 32 bits.
* Change the calling convention of the device mmap entry point to
  pass a vm_offset_t instead of an int for the offset allowing
  devices with a larger memory map than (1<<32) to be supported
  on the alpha (/dev/mem is one such).

These changes are required to allow the X server to mmap the various
I/O regions used for device port and memory access on the alpha.
1998-11-08 12:39:07 +00:00
Nicolas Souchu
af5487872e pcf.c: timeout management added
ppc.c: nsc code improved. Actually, a complete rewrite.
1998-10-31 11:37:09 +00:00
Doug Rabson
57250ffb42 * Fix vga_probe() so that it doesn't report a non-vga display adapter as
a vga.
* Fix broken logic in syscons for a failed probe.
* Fix AlphaStation 500/600 so that non-serial consoles are supported.

Submitted by: Thomas Valentino Crimi <tcrimi+@andrew.cmu.edu> (vga bits),
	      Andrew Gallatin <gallatin@cs.duke.edu> (AS500/AS600)
1998-10-31 10:35:24 +00:00
Poul-Henning Kamp
d259be02bc Update timecounters to new interface. 1998-10-23 10:46:20 +00:00
Bruce Evans
fe310de802 Initialize isa_devtab entries for interrupt handlers in individual
device drivers, not in ioconf.c.  Use a different hack in isa_device.h
so that a new config(8) is not required yet.

pc98 parts approved by: kato
1998-10-22 05:58:45 +00:00