The patch contains following changes:
* In conditional checks, always check for NULL or 0 instead of negating values
* Use malloc and free explicitely, instead of ENA_MEM_FREE and ENA_MEM_FREE (the
dmadev passed to macro is never used, and could be a little misleading)
* Always check for NULL after calling malloc (few checks were missing)
* Rework naming of the goto tags in ena_attach() for consistency
* Fix error handling in ena_attach() - few goto instructions were leading to the
wrong tag
* Destroy MMIO req read request if attach failed
* Remove checking for NULL after calling malloc with M_WAITOK flag
Submitted by: Michal Krawczyk <mk@semihalf.com>
Reviewed by: byenduri_gmail.com
Obtained from: Semihalf
Sponsored by: Amazon.com, Inc.
Differential Revision: https://reviews.freebsd.org/D12853
will now prevent the driver from stripping vlan tags from packets.
PR: 219390
Submitted by: Piotr Pietruszewski <piotr.pietruszewski@intel.com>
Reported by: Charles Goncalves <halfling@halfling.com.br>
Obtained from: 1 week
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D12795
Use our ifm_list of supported media types rather than nested switch
statements to find the current media type. Find a supported type that
matches the current speed.
Remove all workarounds while updating ifmr->ifm_active.
For BNXT_IFMEDIA_ADD, added Three more speeds IFM_10G_T, IFM_2500_T & IFM_2500_KX.
Submitted by: Bhargava Chenna Marreddy <bhargava.marreddy@broadcom.com>
Reviewed by: shurd, sbruno
Approved by: sbruno (mentor)
Sponsored by: Broadcom Limited
Differential Revision: https://reviews.freebsd.org/D12896
Otherwise an orderly shutdown will initiate a watchdog that will cause
a 7 minute delayed reboot *by default*, In the freebsd.org cluster's case
this often worked out be a surprise reboot a minute or two after the
machine came back up.
costly PCI config space operations that slows down systems without the
hardware.
Many thanks to HighPoint for continued support of FreeBSD!
Submitted by: Steve Chang
Reported by: cperciva
MFC after: 2 weeks
sys/dev/mpr/mpr_mapping.c
If _mapping_process_dpm_pg0 detects inconsistencies in the drive
mapping table (stored in the HBA's NVRAM), abort reading it and
continue to boot as if the mapping table were blank. I observed
such inconsistencies in several HBAs after upgrading firmware from
14.0.0.0 to 15.0.0.0.
Reviewed by: slm
MFC after: 3 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D12901
Include ridx <-> rate conversion functions from rtwn(4) +
reuse already calculated value for ieee80211_radiotap(9).
Tested with Asus USB-N10, STA mode.
Some events can take sound pitch as a value so can not be represented
as binary on/off events. Tracking for on/off state is left in place
as it is a part of the evdev API.
Reviewed by: gonzo
Approved by: gonzo (mentor)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D12676
- Do not report T-axis wheel events as button presses
- Reverse T-axis to match Linux
- Remove wrong comment. T-axis buttons state should be checked by level not
by edge to allow continuous wheel tilt reporting
Reviewed by: gonzo
Approved by: gonzo (mentor)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D12676
w/o EVDEV_SUPPORT as it's value has no meaning in this case.
Now presence of this sysctl can be used for discovery if evdev support
for hybrid devices is compiled into kernel or not.
Hide "kern.evdev.sysmouse_t_axis" sysctl for the same reason.
Reviewed by: gonzo
Approved by: gonzo (mentor)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D12676
The r195005 unlocked pmc_sx before calling into pmclog_configure_log()
to avoid the LOR, but it allows flush or closelog to run in parallel
with the configuration, causing many failure modes.
Revert r195005. Pre-create the logging process, allowing it to run
after the set up succeeded, otherwise the process terminates itself.
Reported and tested by: pho
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D12882
hwpmc(4) must not voluntarily call fo_close(), doing this causes
double-close of the file. It seems to almost avoid bad consequences
for pipes, but other types of files demonstrate random memory access.
To fix, remove fo_close() calls, which also do not provide the
declared wake-up of waiters consistently. Instead, send a signal to
the logger and configure the logger process to not block it. Since
logger never returns to userspace, the signal only causes termination
of the interruptible sleeps in fo_write().
Reported and tested by: pho
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
X-Differential revision: https://reviews.freebsd.org/D12882
This is the extra key on 102/105-keys keyboards, located on the right
of the Left Shift key. For instance on a French layout, this is the '<'
key.
This fixes an issue where the key fires no evdev event and thus remains
inactive in an evdev/libinput-enabled X.Org server. The issue only
occurred on an AT keyboard; the same key on a USB keyboard worked fine.
PR: 222609 (only for reference)
Approved by: wulf@
Differential Revision: https://reviews.freebsd.org/D12883
Some devices (P5040, P4080) have multiple frame managers in their DPAA
subsystems. This was prevented by use of a softc singleton in the DPAA
driver. Since if_dtsec(4) has moved to be a child of fman, it can access
the fman device data via the parent object.
Do not read all statistics from the device, instead count them in the
driver except from RX drops - they are received directly from the NIC
in the AENQ descriptor.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Reviewed by: imp
Obtained from: Semihalf
Sponsored by: Amazon.com, Inc.
Differential Revision: https://reviews.freebsd.org/D12852
The newest ena-com HAL supports LLQv2 and introduces
API changes. In order not to break the driver compilation
it was updated/fixed in a following way:
* Change version of the driver to 0.8.0
* Provide reset cause when triggering reset of the device
* Reset device after attach fails
* In the reset task free management irq after calling ena_down. Admin
queue can still be used before ena_down is called, or when it is
being handled
* Do not reset device if ena_reset_task fails
* Move call of the ena_com_dev_reset to the ena_down() routine - it
should be called only if interface was up
* Use different function for checking empty space on the sq ring
(ena-com API change)
* Fix typo on ENA_TX_CLEANUP_THRESHOLD
* Change checking for EPERM with EOPNOTSUPP - change in the ena-com API
* Minor style fixes
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Amazon.com, Inc.
Semihalf
Sponsored by: Amazon.com, Inc.
Differential Revision: https://reviews.freebsd.org/D12143
RTC-8583 is time-of-day clock used in some SOHO routers. This clock has
only 2 bits for year values, but thanks to user SRAM it's possible to save
year value and keep it up to date via driver code.
Tested on Planex_MZK-W300NAG (SoC is RT2880)
Submitted by: Hiroki Mori <yamori83@yahoo.co.jp>
Differential Revision: https://reviews.freebsd.org/D12833
Rework the dTSEC and FMan drivers to be more like a full bus relationship,
so that dtsec can use bus_alloc_resource() instead of trying to handle the
offset from the dts. This required taking some code from the sparc64 ebus
driver to allow subdividing the fman region for the dTSEC devices.
1) Add new phy_types and speeds from the latest firmware header.
2) Introduced a macro to avoid code duplication and improve readability for
the invocation of ifmedia_add().
Submitted by: Bhargava Chenna Marreddy <bhargava.marreddy@broadcom.com>
Reviewed by: shurd, sbruno
Approved by: sbruno (mentor)
Sponsored by: Broadcom Limited
Differential Revision: https://reviews.freebsd.org/D12423
This adds some support for ARM as well as 64-bit. 64-bit on PowerPC is
currently not working, and ARM support has not been completed or tested on the
FreeBSD side.
As this was imported from a Linux tree, it includes some Linux-isms
(ioread/iowrite), so compile with the LinuxKPI for now. This may change in the
future.
fields in the softc; they're ORed together in the ofw_compat_data.
I already caught myself doing 'sc->fectype == <enum val>' without masking
out the feature bits in one place, and that's sure to happen again.
Glomming them together is convenient for storing them in the ofw_compat_data
array, but there's no reason to keep them together in the softc.
When available, enabling this feature causes the hardware to write data
to the receive buffer starting at a 16-bit offset from the start address.
This eliminates the need to copy the data after receiving to re-align
the protocol headers to a 32-bit boundary.
PR: 222634
Submitted by: sebastian.huber@embedded-brains.de
Newer hardware splits the interrupts onto 3 different irq lines, but the
docs barely mention that there are multiple interrupts, and do not detail
how they're split up. The code now supports 1-3 irqs, and uses the same
interrupt service routine to handle all of them.
I modified the submitted changes to use bus_alloc_resources() instead of
using loops to allocate each irq separately. Thus, blame any bugs on me (I
can't actually test on imx7 hardware).
PR: 222634
Submitted by: sebastian.huber@embedded-brains.de
When the FEC is connected to the AXI bus (indicated by AVB flag), a
MAC reset while a bus transaction is pending can hang the bus.
Instead of resetting, turn off the ENABLE bit, which allows the
hardware to complete any in-progress transfers (appending a bad CRC
to any partial packet) and release the AXI bus. This could probably
be done unconditionally for all hardware variants, but that hasn't
been tested.
PR: 222634
Submitted by: sebastian.huber@embedded-brains.de
This flag is analogous to the Linux driver FEC_QUIRK_HAS_AVB. It
indicates an FEC with support for Audio Video Bridging (AVB). This
indicator is used for various other parts in the Linux driver
(drivers/net/ethernet/freescale/fec_main.c).
Use it to customize the receive/transmit buffer alignment. The receive
buffer alignment increased to 64-bytes on the i.MX 6SoloX and i.MX
7Dual. There are no hard alignment restrictions for transmit buffers on
these chips.
Fix the ffec_softc::fectype type to provide enough storage for the
feature flags.
PR: 222634
Submitted by: sebastian.huber@embedded-brains.de
16 was the correct alignment for older hardware, but the imx7 requires
64-byte alignment, which is a fine value to use on all systems.
PR: 222634
Submitted by: sebastian.huber@embedded-brains.de
To accomodate all variaties of Pi DTS files floating around
we look for MAC address property either in DTS node for
USB ethernet (if it exists) or at predefined path
".../usb/hub/ethernet".
After r324184 smsc_fdt_find_eth_node started to return node
with compatibility string "usb424,ec00" as an eth node.
In imported GNU dts files this node still does not have
MAC address related property, and therefor following check for
"mac-address" and "local-mac-address" fails.
To make this logic more robust do not just search for the node
but also make sure it has required property, so if node with
accepted compatibility string exists but doesn't have the
property we fall back to looking for hardoded path mentioned above.
hw.ipmi.cycle_time is the time to wait for the power down phase of the
ipmi power cycle before falling back to either reboot or halt.
Sponsored by: Netflix
o Make hw.ipmi.on a tuneable
o Changes to keep shutdown from hanging indefinitately after the wd
would normally have been disabled.
o Add support for setting pretimeout (which fires an interrupt
some time before the actual watchdog expires)
o Allow refinement of the actions to take when the watchdog expires
o Allow special startup timeout to keep us from hanging in boot
before watchdogd is started, but after we've loaded the kernel.
Obtained From: Netflix OCA Firmware
Some BMCs support power cycling the chassis via the chassis control
command 2 subcommand 2 (ipmitool called it 'chassis power cycle'). If
the BMC supports the chassis device, register a shutdown_final handler
that sends the power cycle command if request and waits up to 10s for
it to take effect. To minimize stack strain, we preallocate a ipmi
request in the softc. At the moment, we're verbose about what we're
doing.
Sponsored by: Netflix
When using a kernel built with the GZIO config option, dumpon -z can be
used to configure gzip compression using the in-kernel copy of zlib.
This is useful on systems with large amounts of RAM, which require a
correspondingly large dump device. Recovery of compressed dumps is also
faster since fewer bytes need to be copied from the dump device.
Because we have no way of knowing the final size of a compressed dump
until it is written, the kernel will always attempt to dump when
compression is configured, regardless of the dump device size. If the
dump is aborted because we run out of space, an error is reported on
the console.
savecore(8) is modified to handle compressed dumps and save them to
vmcore.<index>.gz, as it does when given the -z option.
A new rc.conf variable, dumpon_flags, is added. Its value is added to
the boot-time dumpon(8) invocation that occurs when a dump device is
configured in rc.conf.
Reviewed by: cem (earlier version)
Discussed with: def, rgrimes
Relnotes: yes
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D11723
different from hardware defaults. The congestion channel map, which is
still fixed, needs to be tracked separately now. Change the congestion
setting for TOE rx queues to match the drivers on other OSes while here.
MFC after: 2 weeks
Sponsored by: Chelsio Communications
- A number of unused variable warnings,
- a missing prototype warning (actually a dead function),
- and a potential use of an uninitialized variable.
Reviewed by: pfg
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12683
