Prune dead mirrors from the list of mirrors in bsdconfig and bsdinstall.
All these return NXDOMAIN when trying to resolve them.
Reviewed by: emaste
Approved by: emaste
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D26535
I had failed to notice that sgsendccb() was using cam_periph_mapmem()
and thus was not passing down user pointers directly to drivers. In
practice this broke requests submitted from userland.
PR: 249395
Reported by: Trenton Schulz <trueos@norwegianrockcat.com>
Reviewed by: scottl
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D26550
Allow the necessary parts of systm.h to be visible in the _STANDALONE
environnment. Limit the reset to only being visible for _KERNEL
builds. Map KASSERT, etc to printf on failure in the bootloader until
we have more confidence things won't break and leave systems
unbootable. Eventually, this should map to a full panic in the
bootloader, but that also needs some enhancement to be more useful.
Reviewed by: tsoome, jhb
Differential Revision: https://reviews.freebsd.org/D26543
Original patch was against FreeBSD 12, and a test compile wasn't run against
head. md_tls_tcb_offset field was moved from mdthread to mdproc in the
meantime.
MFC after: 1 week
Sponsored by: Juniper Networks, Inc.
_KERNEL and _STANDALONE are different things. They cannot both be true
at the same time. If things that are normally visible only to _KERNEL
are needed for the _STANDALONE environment, you need to also make them
visible to _STANDALONE. Often times, this will be just a subset of the
required things for _KERNEL (eg global variables are but one example).
sys/cdefs.h is included by pretty much everything in both the loader
and the kernel, so is the ideal choke point.
A received control packet may cause the transmit queue to be flushed, in
which case ng_l2tp_seq_recv_nr() cancels the transmit timeout handler.
The handler checks to see if it was cancelled before doing anything, but
did so before acquiring the node lock, so a small race window could
cause ng_l2tp_seq_rack_timeout() to attempt to flush an empty queue,
ultimately causing a null pointer dereference.
PR: 241133
Reviewed by: bz, glebius, Lutz Donnerhacke
MFC after: 3 days
Sponsored by: Rubicon Communications, LLC (Netgate)
Differential Revision: https://reviews.freebsd.org/D26548
When the DEVICE_PATH is <= 4 that means it's effectively empty. I have
a laptop that has a BIOS that likes to generate these:
8be4df61-93ca-11d2-aa0d-00e098032b8c-Boot2001
0000: 01 00 00 00 04 00 45 00 46 00 49 00 20 00 55 00
0010: 53 00 42 00 20 00 44 00 65 00 76 00 69 00 63 00
0020: 65 00 00 00 7f ff 04 00 52 43
which now decodes as
8be4df61-93ca-11d2-aa0d-00e098032b8c-Boot2001
* EFI USB Device
Empty path
Option:
0000: 52 43
which matches my hand-decode.
Add an extra newline after Option: to make it look nice.
I suspect that these entries really should be VenHw entries instead,
but my ability to change that is NIL, so cope with them as best we can.
efibootmgr(8)'s output is fine and doesn't need adjusting.
Summary:
Two bugs:
* Elf32_Auxinfo is broken, using pointers in the union, which are 64-bits not
32.
* freebsd32_sysarch() doesn't update the 'user local' register when handling
MIPS_SET_TLS, leading to a NULL pointer dereference in the 32-bit
application.
Reviewed by: #mips, brooks
MFC after: 1 week
Sponsored by: Juniper Networks, Inc
Differential Revision: https://reviews.freebsd.org/D26556
In some cases, the syscon driver may be used by consumer requiring better
control about locking (ie. it may be used as registe file provider for clock
driver which needs locked access to multiple registers).
Add fine locking protocol methods together with bunch of helper functions
in syscon driver and implement this functionality in syscon_generic driver.
MFC after: 4 weeks
many sockets in TIME_WAIT state at the end of the test.
PR: 249885
Reviewed by: markj
Approved by: markj
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D26549
Syscon can also have child nodes that share a registration file with it.
To do this correctly, follow these steps:
- subclass syscon from simplebus and expose it if the node is also
"simple-bus" compatible.
- block simplebus probe for this compatible string, so it's priority
(bus pass) doesn't colide with syscon driver.
While I'm in, also block "syscon", "simple-mfd" for the same reason.
MFC after: 4 weeks
The fastpath in tcp_output tries to send out
full segments, and avoid sending partial segments by
comparing against the static t_maxseg variable.
That value does not consider tcp options like timestamps,
while the initial window calculation is using
the correct dynamic tcp_maxseg() function.
Due to this interaction, the last, full size segment
is considered too short and not sent out immediately.
Reviewed by: tuexen
MFC after: 2 weeks
Sponsored by: NetApp, Inc.
Differential Revision: https://reviews.freebsd.org/D26478
Adjust ssthresh in after_idle to the maximum of
the prior ssthresh, or 3/4 of the prior cwnd. See
RFC2861 section 2 for an in depth explanation for
the rationale around this.
As newreno is the default "fall-through" reaction,
most tcp variants will benefit from this.
Reviewed by: tuexen
MFC after: 2 weeks
Sponsored by: NetApp, Inc.
Differential Revision: https://reviews.freebsd.org/D22438
designated initializers. This makes it easier to modify 'struct sysent'
layout.
Reviewed by: kevans
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D26530
For a long period value and the duty specified as a percentage,
there could be an overflow.
Using unsigned integers aligns the code with struct pwm_state and allows
to safely use periods up to 4 seconds where supported by drivers.
MFC after: 2 weeks
The hardware supports periods as long as 196 seconds[*] when using the
maximal prescaling of 72000 and maximum cycle count of 2^16.
But the code becomes incorrect when the period length approaches 1 second.
That's because of things like NS_PER_SEC / period.
[*] At the same time I must note that the KPI provides for maximum
period of about 4 seconds (2^32 nanoseconds).
MFC after: 2 weeks
If a FUSE server returns FOPEN_DIRECT_IO in response to FUSE_OPEN, that
instructs the kernel to bypass the page cache for that file. This feature
is also known by libfuse's name: "direct_io".
However, when accessing a file via mmap, there is no possible way to bypass
the cache completely. This change fixes a deadlock that would happen when
an mmap'd write tried to invalidate a portion of the cache, wrongly assuming
that a write couldn't possibly come from cache if direct_io were set.
Arguably, we could instead disable mmap for files with FOPEN_DIRECT_IO set.
But allowing it is less likely to cause user complaints, and is more in
keeping with the spirit of open(2), where O_DIRECT instructs the kernel to
"reduce", not "eliminate" cache effects.
PR: 247276
Reported by: trapexit@spawn.link
Reviewed by: cem
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D26485
Add EXAMPLES section showing the use of -a and -s flags and how which(1)
treates duplicates.
Approved by: manpages (gbe@)
Differential Revision: https://reviews.freebsd.org/D26182
We have (two versions) of MS() and SM() macros which we use throughout
the wireless code. Change all but three places (ath_hal, rtwn, and rsu)
to the newly provided _IEEE80211_MASKSHIFT() and _IEEE80211_SHIFTMASK()
macros. Also change one internal case using both _S and _M instead of
just _S away from _M (one of the reasons rtwn and rsu were not changed).
This was done semi-mechanically. No functional changes intended.
Requested by: gnn (D26091)
Reviewed by: adrian (pre line wrap)
MFC after: 2 weeks
Sponsored by: Rubicon Communications, LLC (d/b/a "Netgate")
Differential Revision: https://reviews.freebsd.org/D26539
- We can exit the loop as soon as the filter check passes.
- The alignment check has already passed so there is no need to also run
it here.
Sponsored by: Innovate UK
We need to use a bounce buffer when the memory we are operating on is not
aligned to a cacheline, and not aligned to the maps alignment.
The former is to stop other threads from dirtying the cacheline while we
are performing DMA operations with it. The latter is to check memory
passed in by a driver is correctly aligned for the device.
Reviewed by: mmel
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D26496
