The loader indended to search the kernel file name (only) for . but
instead searched the entire path, so paths like
"boot/test.elfv2/kernel" would not work.
Submitted by: alfredo.junior_eldorado.org.br
Reviewed by: kevans
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D19658
Either msync(MS_INVALIDATE) or the object unlock during vnode
truncation can expose invalid pages backing wired entries. Accept
them, but do not install them into destrination pmap. We must create
copied pages in the copy case, because e.g. vm_object_unwire() expects
that the entry is fully backed.
Reported by: syzkaller, via emaste
Reported by: syzbot+514d40ce757a3f8b15bc@syzkaller.appspotmail.com
Reviewed by: markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D19615
Revision r345269 introduced changes that triggered a regression on netmap
unit tests (tests/sys/netmap/ctrl-api-test.c).
This change updates the unit tests to remove the regression.
Reported by: lwhsu
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D19639
exist
Apply EX_UNAVAILABLE patch part from PR 170775 to match the documentation.
Checked with a command from PR 210770:
lockf -n /tmp/doesnotexist echo; echo $?
PR: 210770
MFC after: 1 week
From Jake:
The iflib core never modifies the isc_driver_version string. Allow
drivers to safely assign pointers to constant buffers by marking this
parameter const.
Submitted by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed by: erj@, gallatin@, jhb@
MFC after: 1 week
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D19577
From Krzysztof:
The driver built as KLD cannot be unloaded, if this flag is not set.
Submitted by: Krzysztof Galazka <krzysztof.galazka@intel.com>
Reviewed by: shurd@, erj@
MFC after: 1 week
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D19402
From Jake:
iflib_fl_setup calculates a suitable buffer size for the Rx mbufs based
on the isc_max_frame_size value that drivers setup. This calculation is
repeated by drivers when programming their hardware with the size of
each Rx buffer.
This can lead to a mismatch where the iflib mbuf size is different from
the expected size of the buffer as programmed by the hardware. This can
lead to unexpected results.
If iflib ever wants to support mbuf sizes larger than one page, every
driver must be updated to account for the new possible buffer sizes.
Fix this by calculating the mbuf size prior to calling IFDI_INIT, and
adding the iflib_get_rx_mbuf_sz function which will expose this value to
drivers, so that they do not repeat the same calculation.
Submitted by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed by: shurd@, erj@
MFC after: 1 week
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D19489
From Jake:
iflib_encap calls bus_dmamap_load_mbuf_sg. Upon it returning EFBIG, an
m_collapse and an m_defrag are attempted to shrink the mbuf cluster to
fit within the DMA segment limitations.
However, if we call m_defrag, and then bus_dmamap_load_mbuf_sg returns
EFBIG on the now defragmented mbuf, we will continuously re-call
bus_dmamap_load_mbuf_sg over and over.
This happens because m_head isn't NULL, and remap is >1, so we don't try
to m_collapse or m_defrag again. The only way we exit the loop is if
m_head is NULL. However, m_head can't be modified by the call to
bus_dmamap_load_mbuf_sg, because we don't pass it as a double pointer.
I believe this will be an incredibly rare occurrence, because it is
unlikely that bus_dmamap_load_mbuf_sg will actually fail on the second
defragment with an EFBIG error. However, it still seems like
a possibility that we should account for.
Fix the exit check to ensure that if remap is >1, we will also exit,
even if m_head is not NULL.
Submitted by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed by: shurd@, gallatin@
MFC after: 1 week
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D19468
The jail(8) command provides a variety of jail pseudo-parameters that are
useful to consumers of bectl, mount.devfs being the most-often-requested
paramater by bectl users.
command, exec.start, nopersist, and persist may not be specified via -o to
bectl. The command/exec.start remains passed as it always has at the end of
bectl, and persistence is dictated by -b/-U bectl jail arguments.
Submitted by: Wes Maag <jwmaag gmail com>
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D19282
Minimalistic PSCI implementation in U-Boot doesn't implement get_version()
method for some SoC. In this case, use PSCI version declared by 'psci' node
in DT as fallback.
MFC after: 2 weeks
- older DT can use 'cpu0-supply' property for power supply binding.
- don't expect that actual CPU frequency is contained in CPU
operational point table, but read current CPU voltage directly from
reguator. Typically, u-boot can set starting CPU frequency to any
value.
MFC after: 2 weeks
In current code, the delay argument in FDT_PLATFORM_DEF(2) improperly
initialize refs field from kobj_class structure instead of delay_count
field.
This causes not working DELAY() function (due to never initialized
delay_count) in earlier boot stages, until the first timer was attached.
MFC after: 2 weeks
Update NAT64LSN implementation:
o most of data structures and relations were modified to be able support
large number of translation states. Now each supported protocol can
use full ports range. Ports groups now are belongs to IPv4 alias
addresses, not hosts. Each ports group can keep several states chunks.
This is controlled with new `states_chunks` config option. States
chunks allow to have several translation states for single alias address
and port, but for different destination addresses.
o by default all hash tables now use jenkins hash.
o ConcurrencyKit and epoch(9) is used to make NAT64LSN lockless on fast path.
o one NAT64LSN instance now can be used to handle several IPv6 prefixes,
special prefix "::" value should be used for this purpose when instance
is created.
o due to modified internal data structures relations, the socket opcode
that does states listing was changed.
Obtained from: Yandex LLC
MFC after: 1 month
Sponsored by: Yandex LLC
and remove possible panic condition.
It is already allowed to sleep in bpfattach[2], since BPF_LOCK was
converted to SX lock in r332388. Also move KASSERT() to the top of
function and make full initialization before bpf_if will be linked
to BPF's list of interfaces.
MFC after: 2 weeks
During initialization of the forth interpreter
the loader looks for "/boot/boot.4th"
and executes any code found there.
That file was loaded bypassing verification.
Add a call to verify_file to change that.
Submitted by: Kornel Duleba <mindal@semihalf.com>
Reviewed by: sjg
Obtained from: Semihalf
Sponsored by: Stormshield
It may happen on some machines, that even if SGX is disabled
in firmware, the driver would still attach despite EPC base and
size equal zero. Such behaviour causes a kernel panic when the
module is unloaded. Add a simple check to make sure we
only attach when these values are correctly set.
Submitted by: Kornel Duleba <mindal@semihalf.com>
Reviewed by: br
Obtained from: Semihalf
Sponsored by: Stormshield
Differential Revision: https://reviews.freebsd.org/D19595
enabling the functions that save and restore MXCSR, since access to this
register requires SSE support.
Note that you may run into other issues with OpenMP on i386, since this
*not* yet supported upstream, and certainly not extensively tested.
PR: 236062, 236582
MFC after: 1 month
X-MFC-With: r344779
When processing mtree(5) MANIFEST files, makefs(8) previously threw an
error if it encountered an entry whose "time" attribute contained a
non-zero subsecond component (e.g. time=1551620152.987220000).
Update the handling logic to properly assign the subsecond component if
built with nanosecond support, or silently discard it otherwise.
Also, re-enable the time attribute for the kyua tests.
PR: 194703
Submitted by: Mitchell Horne <mhorne063@gmail.com>
Differential Revision: https://reviews.freebsd.org/D19627
OpenBSD and NetBSD provide macros to directly reference the underlying
struct timespec's tv_nsec member. While FreeBSD has such macros for
tv_sec, the others are missing. Add the following macros:
st->st_atimensec
st->st_mtimensec
st->st_ctimensec
st->st_birthtimensec
Adding these fields will provide programs which reference them better
portability to FreeBSD. An example of such a program is makefs(8),
which has unused support for subseconds that it has inherited from
NetBSD.
Submitted by: Mitchell Horne <mhorne063@gmail.com>
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D19626
on scalbn and a few other math functions, via libcompiler-rt. This
should allow OpenMP programs to link with BFD linkers too.
Reported by: jbeich
PR: 236062, 236581
MFC after: 1 month
X-MFC-With: r344779
o most of data structures and relations were modified to be able support
large number of translation states. Now each supported protocol can
use full ports range. Ports groups now are belongs to IPv4 alias
addresses, not hosts. Each ports group can keep several states chunks.
This is controlled with new `states_chunks` config option. States
chunks allow to have several translation states for single alias address
and port, but for different destination addresses.
o by default all hash tables now use jenkins hash.
o ConcurrencyKit and epoch(9) is used to make NAT64LSN lockless on fast path.
o one NAT64LSN instance now can be used to handle several IPv6 prefixes,
special prefix "::" value should be used for this purpose when instance
is created.
o due to modified internal data structures relations, the socket opcode
that does states listing was changed.
Obtained from: Yandex LLC
MFC after: 1 month
Sponsored by: Yandex LLC
The line was misedited to change tt to st instead of
changing ut to st.
The use of st as the denominator in mul64_by_fraction() will lead
to an integer divide fault in the intr proc (the process holding
ithreads) where st will be 0. This divide by 0 happens after
the total runtime for all ithreads exceeds 76 hours.
Submitted by: bde
Some applications forward from/to host rings most or all the
traffic received or sent on a physical interface. In this
cases it is desirable to have more than a pair of RX/TX host
rings, and use multiple threads to speed up forwarding.
This change adds support for multiple host rings. On registering
a netmap port, the user can specify the number of desired receive
and transmit host rings in the nr_host_tx_rings and nr_host_rx_rings
fields of the nmreq_register structure.
MFC after: 2 weeks
CLAT is customer-side translator that algorithmically translates 1:1
private IPv4 addresses to global IPv6 addresses, and vice versa.
It is implemented as part of ipfw_nat64 kernel module. When module
is loaded or compiled into the kernel, it registers "nat64clat" external
action. External action named instance can be created using `create`
command and then used in ipfw rules. The create command accepts two
IPv6 prefixes `plat_prefix` and `clat_prefix`. If plat_prefix is ommitted,
IPv6 NAT64 Well-Known prefix 64:ff9b::/96 will be used.
# ipfw nat64clat CLAT create clat_prefix SRC_PFX plat_prefix DST_PFX
# ipfw add nat64clat CLAT ip4 from IPv4_PFX to any out
# ipfw add nat64clat CLAT ip6 from DST_PFX to SRC_PFX in
Obtained from: Yandex LLC
Submitted by: Boris N. Lytochkin
MFC after: 1 month
Relnotes: yes
Sponsored by: Yandex LLC
Add second IPv6 prefix to generic config structure and rename another
fields to conform to RFC6877. Now it contains two prefixes and length:
PLAT is provider-side translator that translates N:1 global IPv6 addresses
to global IPv4 addresses. CLAT is customer-side translator (XLAT) that
algorithmically translates 1:1 IPv4 addresses to global IPv6 addresses.
Use PLAT prefix in stateless (nat64stl) and stateful (nat64lsn)
translators.
Modify nat64_extract_ip4() and nat64_embed_ip4() functions to accept
prefix length and use plat_plen to specify prefix length.
Retire net.inet.ip.fw.nat64_allow_private sysctl variable.
Add NAT64_ALLOW_PRIVATE flag and use "allow_private" config option to
configure this ability separately for each NAT64 instance.
Obtained from: Yandex LLC
MFC after: 1 month
Sponsored by: Yandex LLC
Update node flags when driver supports SMPS, not when it is disabled or
in dynamic mode ((iv_htcaps & HTCAP_SMPS) != 0).
Checked with RTL8188EE (1T1R), STA mode - 'smps' word should disappear
from 'ifconfig wlan0' output.
MFC after: 2 weeks
The old implementation, at the VFS layer, would map the entire range of
logical blocks between the starting offset and the first data block
following that offset. With large sparse files this is very
inefficient. The VFS currently doesn't provide an interface to improve
upon the current implementation in a generic way.
Add ufs_bmap_seekdata(), which uses the obvious algorithm of scanning
indirect blocks to look for data blocks. Use it instead of
vn_bmap_seekhole() to implement SEEK_DATA.
Reviewed by: kib, mckusick
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19598
functionality. This should make example OpenMP programs work out of the
box.
Reported by: jbeich
PR: 236062, 236581
MFC after: 1 month
X-MFC-With: r344779
It seems my subconcious plan in r345088 to not only prefer IPv6 autoconf
but to also slowly deteriorate legacy IP auto-configuration was uncovered
way too early.
In case IPv6 is a thing yet ipv6_autoconfif was not true, we would not
bring up the interface yet tell the follow-up DHCPv4 configuration in
ifconfig_up() that we did. So unless you were doing SYNCDHCP or IPv6
you would not get legacy-IP DHCPv4 configuration.
I see multiple problems here: (a) people not yet using IPv6 (obviously a
problem), and (b) the dhclient startup script not running dhclient in
that case despite configured to do so (needs to be investigated seperately).
Reported by: Pawel Biernacki (pawel.biernacki gmail.com)
Tested by: Pawel Biernacki
Differential Revision: https://reviews.freebsd.org/D19488
Pointyhat to: bz (not sure if it is for breaking or
for letting them notice it so easily)
