r80270 has the usual wrong fix for unsafe signal handling -- just set
a flag and return to let an event loop check the flag and do safe
handling. This never works for signals like SIGBUS and SIGSEGV that
repeat and works poorly for others unless the application has an event
loop designed to support this.
For these signals, clean up unsafely as before, except for arranging that
nested signals are fatal and forcing a nested signal if the cleanup doesn't
cause one.
method as in /bin/sh.
We still do technically undefined things in the signal handler, but it
is safe in practice to access state that is protected by INTOFF/INTON.
In a recent commit, I sprinkled VGLMouseFrozen++/-- operations in
places that need INTOFF/INTON. This prevented clobbering of pixels
under the mouse, but left mouse signals deferred for too long. It is
necessary to call the signal handler when the count goes to 0. Old
versions did this in the unfreeze function, but didn't block actual
signals, so the signal handler raced itself. The sprinkled operations
reduced the races, but when then worked to block a race they left
signals deferred for too long.
Use INTOFF/INTON to fix complete loss of mouse signals while reading
the mouse status. Clobbering of the state was prevented by SIG_IGN'ing
mouse signals, but that has a high overhead and broke more than it
fixed by losing mouse signals completely. sigprocmask() works to block
signals without losing them completely, but its overhead is also too
high.
libvgl's mouse signal handling is often worse than none. Applications
can't block waiting for a mouse or keyboard or other event, but have
to busy-wait. The SIG_IGN's lost about half of all mouse events while
busy-waiting for mouse events.
It started truncating its color arg to 8 bits using plot() in r229415.
The version in r229415 is also more than 3 times slower in segmented
modes, by doing more syscalls to move the window.
segmented modes.
Also fix some style bugs in the 2 changed lines. libvgl uses a very non-KNF
style with 2-column indentation with no tabs except for regressions.
Reading of single pixels didn't look under the cursor.
Copying of 1x1 bitmaps didn't look under the cursor for either reading
or writing.
Copying of larger bitmaps looked under the cursor for at most the
destination.
Copying of larger bitmaps looked under a garbage cursor (for the Display
bitmap) when the destination is a MEMBUF. The results are not used, so
this only wasted time and flickered the cursor.
Writing of single pixels looked under a garbage cursor for MEMBUF
destinations, as above except this clobbered the current cursor and
didn't update the MEMBUF. Writing of single pixels is not implemented
yet in depths > 8. Otherwise, writing of single pixels worked. It was
the only working case for accessing pixels under the cursor.
Clearing of MEMBUFs wasted time freezing the cursor in the Display bitmap.
The fixes abuse the top bits in the color arg to the cursor freezing
function to control the function. Also clear the top 8 bits so that
applications can't clobber the control bits or create 256 aliases for
every 24-bit pixel value in depth 32.
Races fixed:
Showing and hiding the cursor only tried to avoid races with the mouse
event signal handler for internal operations. There are still many
shorter races from not using volatile or sig_atomic_t for the variable
to control this. This variable also controls freezes, and has more
complicated states than before.
The internal operation of unfreezing the cursor opened a race window
by unsetting the signal/freeze variable before showing the cursor.
depths for the source and target are not supported. The bits for higher
numbered planes (mostly for red) were either not copied or were copied to
lower numbered planes for nearby pixels.
Quick fix for creation of mouse cursor bitmaps in all depths. This fix is
only complete for the default lightwhite cursor with a black frame.
Even the lightwhite and black colors are hard to find. The templates
use 0xff for lightwhite, but that means brightblue in the simplest mode
(Truecolor depth 24). Other modes are even more complicated -- they are
singly or doubly indirect throught palette(s) and changing of the palettes
by applications is supported.
Details:
Replicate the template value for Truecolor modes to fill out the target
depth (and more for depths not a multiple of 8). Do this for every
drawing of the cursor so that it sort of works for mouse cursor bitmaps
set by applications.
Use 0xf for lightwhite in most other modes. Only do this for the
default cursor so that it doesn't affect mouse cursor bitmaps set by
applications. 0xf mostly works because it was originally for CGA
lightwhite and is emulated using 1 or 2 indirections on EGA and VGA.
0x3f (EGA white) and 0xff (VGA black) direct palette indexes mostly
don't work since backwards compatibility inhibits or prevents them
representing lightwhite. But 0x3f (EGA white) must be used for mode
37 (VGA_MODEX) (320x240x8 V) since this mode is closer to EGA than VGA.
was not taken modulo the window size in VGLClear().
Segmented modes also need a kernel fix to almost work. The ioctl to set
the window origin is broken.
These bugs are rarely problems since non-VESA modes only need
segmentation to support multiple pages but libvgl doesn't support
multiple pages and treats these modes as non-segmented, and VESA modes
are usually mapped linearly except on old hardware so they really are
non-segmented.
to match the change in its declaration. Change the declaration back to
"byte color" since setting of the border color is not supported for more
than 256 colors.
VGLBitmapString() and VGLSetBorder() so as to not truncate to 8 bits.
Complete the corresponding fix for VGLGetXY() and VGLPutXY() (parts
of the man page were out of date).
Since the font format is undocumented, it is unclear how non-multiples
of 8 should be padded to bytes in the font file. Use the same
representation as bdf text format (big- endian, with padding in the
lower bits).
There seems to be no alternative to reading each plane independently using
3 slow i/o's per plane (this delivers 8 nearby pixels, but we don't buffer
the results so run 8 times slower than necessary.
All the code for this was there, but it was ifdefed out and replaced by
simpler code that cannot work in planar modes. The ifdefed out code
was correct except it was missing a volatile declaration, so compilers
optimized the multiple dummy reads in it to a single read.
Support for 16-bit and 32-bit Truecolor modes was supposed to be
complete in r70991 of main.c and in nearby revisions for other files, but
it was broken by the overruns in most cases (all cases were the mouse
is enabled, and most cases where bitmaps are used). r70991 also
uninintentionally added support for depths 9-15, 17-23 and 25-31.
Depth 24 was more obviously broken and its support is ifdefed out. In
the other ranges, only depth 15 is common. It was broken by buffer
overruns in all cases.
bitmap.c:
- the static buffer was used even when it was too small (but it was
large enough to often work accidentally in depth 16)
- the size of the dynamically allocated buffer was too small
- the sizing info bitmap->PixelBytes was not inititialzed in the bitmap
constructor. It often ended up as 0 for MEMBUFs, so using it in more
places gave more null pointer accesses. (It is per-bitmap, but since
conversion between bitmaps of different depths is not supported (except
from 4 bits by padding to 8), it would work better if it were global.)
main.c:
- depths were rounded down instead of up to a multiple of 8, so PixelBytes
was 1 too small for depths above 8 except 16, 24 and 32.
- PixelBytes was not initialized for 4-bit planar modes. It isn't really
used for frame buffer accesses in these modes, but needs to be 1 in
MEMBUF images.
mouse.c:
- the mouse cursor buffers were too small.
vgl.h:
- PixelBytes was not initialized in the static bitmap constructor. It
should be initialized to the value for the current mode, but that is
impossible in a static constructor. Initialize it to -1 so as to
fail if it is used without further initialization.
All modes that are supposed to be supported now don't crash in
nontrivial tests, and almost work. Missing uses of PixelBytes now
give in-bounds wrong pointers instead of overruns. Misconversions of
bitmaps give multiple miscolored mouse cursors instead of 1 white one,
and similarly for bitmaps copied through a MEMBUF.
args (neither MAP_PRIVATE nor MAP_SHARED). It was broken in r271635
and/or r271724 by stricter checking. The compatibility code in r271724
doesn't work for my old binaries (actually new binaries with old
libraries).
PR: needed to test the fix for PR 162373
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using mis-identified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
This both avoids some dependencies on xinstall.host and allows
bootstrapping on older releases to work due to lack of at least 'install -l'
support.
Sponsored by: EMC / Isilon Storage Division
Off by default, build behaves normally.
WITH_META_MODE we get auto objdir creation, the ability to
start build from anywhere in the tree.
Still need to add real targets under targets/ to build packages.
Differential Revision: D2796
Reviewed by: brooks imp
http://www.graphicsgems.org/
At the time it claimed to be 3-4 times faster than the traditional
algorithm.
PR: 18769
Approved by: jhb (mentor)
MFC after: 2 weeks
'inline' to 'static inline'. Otherwise, a C99 compiler (such as clang)
will output an undefined symbol for those functions in the resulting
object file. (Even gcc will do this, when you use "-std=c99".)
This should fix the "undefined reference to `set4pixels'" errors that
some people were seeing during ports building, when their world was
compiled with clang.
Approved by: rpaulo (mentor)
Similar to libexec/, do the same with lib/. Make WARNS=6 the norm and
lower it when needed.
I'm setting WARNS?=0 for secure/. It seems secure/ includes the
Makefile.inc provided by lib/. I'm not going to touch that directory.
Most of the code there is contributed anyway.
preparation for 8.0-RELEASE. Add the previous version of those
libraries to ObsoleteFiles.inc and bump __FreeBSD_Version.
Reviewed by: kib
Approved by: re (rwatson)
