Commit Graph

60 Commits

Author SHA1 Message Date
Warner Losh
329e817fcc Reapply, with minor tweaks, r338025, from the original commit:
Remove unused and easy to misuse PNP macro parameter

Inspired by r338025, just remove the element size parameter to the
MODULE_PNP_INFO macro entirely.  The 'table' parameter is now required to
have correct pointer (or array) type.  Since all invocations of the macro
already had this property and the emitted PNP data continues to include the
element size, there is no functional change.

Mostly done with the coccinelle 'spatch' tool:

  $ cat modpnpsize0.cocci
    @normaltables@
    identifier b,c;
    expression a,d,e;
    declarer MODULE_PNP_INFO;
    @@
     MODULE_PNP_INFO(a,b,c,d,
    -sizeof(d[0]),
     e);

    @singletons@
    identifier b,c,d;
    expression a;
    declarer MODULE_PNP_INFO;
    @@
     MODULE_PNP_INFO(a,b,c,&d,
    -sizeof(d),
     1);

  $ rg -l MODULE_PNP_INFO -- sys | \
    xargs spatch --in-place --sp-file modpnpsize0.cocci

(Note that coccinelle invokes diff(1) via a PATH search and expects diff to
tolerate the -B flag, which BSD diff does not.  So I had to link gdiff into
PATH as diff to use spatch.)

Tinderbox'd (-DMAKE_JUST_KERNELS).
Approved by: re (glen)
2018-09-26 17:12:14 +00:00
Conrad Meyer
b8e771e97a Back out r338035 until Warner is finished churning GSoC PNP patches
I was not aware Warner was making or planning to make forward progress in
this area and have since been informed of that.

It's easy to apply/reapply when churn dies down.
2018-08-19 00:46:22 +00:00
Conrad Meyer
faa319436f Remove unused and easy to misuse PNP macro parameter
Inspired by r338025, just remove the element size parameter to the
MODULE_PNP_INFO macro entirely.  The 'table' parameter is now required to
have correct pointer (or array) type.  Since all invocations of the macro
already had this property and the emitted PNP data continues to include the
element size, there is no functional change.

Mostly done with the coccinelle 'spatch' tool:

  $ cat modpnpsize0.cocci
    @normaltables@
    identifier b,c;
    expression a,d,e;
    declarer MODULE_PNP_INFO;
    @@
     MODULE_PNP_INFO(a,b,c,d,
    -sizeof(d[0]),
     e);

    @singletons@
    identifier b,c,d;
    expression a;
    declarer MODULE_PNP_INFO;
    @@
     MODULE_PNP_INFO(a,b,c,&d,
    -sizeof(d),
     1);

  $ rg -l MODULE_PNP_INFO -- sys | \
    xargs spatch --in-place --sp-file modpnpsize0.cocci

(Note that coccinelle invokes diff(1) via a PATH search and expects diff to
tolerate the -B flag, which BSD diff does not.  So I had to link gdiff into
PATH as diff to use spatch.)

Tinderbox'd (-DMAKE_JUST_KERNELS).
2018-08-19 00:22:21 +00:00
Warner Losh
b042bc51c8 Add PNP info to PCI attachment of alc driver
Reviewed by: imp, chuck
Submitted by: Lakhan Shiva Kamireddy <lakhanshiva@gmail.com>
Sponsored by: Google, Inc. (GSoC 2018)
Pull Request: https://github.com/bsdimp/freebsd/pull/4
2018-07-08 20:39:52 +00:00
Matt Macy
d7c5a620e2 ifnet: Replace if_addr_lock rwlock with epoch + mutex
Run on LLNW canaries and tested by pho@

gallatin:
Using a 14-core, 28-HTT single socket E5-2697 v3 with a 40GbE MLX5
based ConnectX 4-LX NIC, I see an almost 12% improvement in received
packet rate, and a larger improvement in bytes delivered all the way
to userspace.

When the host receiving 64 streams of netperf -H $DUT -t UDP_STREAM -- -m 1,
I see, using nstat -I mce0 1 before the patch:

InMpps OMpps  InGbs  OGbs err TCP Est %CPU syscalls csw     irq GBfree
4.98   0.00   4.42   0.00 4235592     33   83.80 4720653 2149771   1235 247.32
4.73   0.00   4.20   0.00 4025260     33   82.99 4724900 2139833   1204 247.32
4.72   0.00   4.20   0.00 4035252     33   82.14 4719162 2132023   1264 247.32
4.71   0.00   4.21   0.00 4073206     33   83.68 4744973 2123317   1347 247.32
4.72   0.00   4.21   0.00 4061118     33   80.82 4713615 2188091   1490 247.32
4.72   0.00   4.21   0.00 4051675     33   85.29 4727399 2109011   1205 247.32
4.73   0.00   4.21   0.00 4039056     33   84.65 4724735 2102603   1053 247.32

After the patch

InMpps OMpps  InGbs  OGbs err TCP Est %CPU syscalls csw     irq GBfree
5.43   0.00   4.20   0.00 3313143     33   84.96 5434214 1900162   2656 245.51
5.43   0.00   4.20   0.00 3308527     33   85.24 5439695 1809382   2521 245.51
5.42   0.00   4.19   0.00 3316778     33   87.54 5416028 1805835   2256 245.51
5.42   0.00   4.19   0.00 3317673     33   90.44 5426044 1763056   2332 245.51
5.42   0.00   4.19   0.00 3314839     33   88.11 5435732 1792218   2499 245.52
5.44   0.00   4.19   0.00 3293228     33   91.84 5426301 1668597   2121 245.52

Similarly, netperf reports 230Mb/s before the patch, and 270Mb/s after the patch

Reviewed by:	gallatin
Sponsored by:	Limelight Networks
Differential Revision:	https://reviews.freebsd.org/D15366
2018-05-18 20:13:34 +00:00
Mark Johnston
8a4665833d Add netdump hooks to alc(4).
Tested with an AR8162.

Reviewed by:	julian, sbruno
MFC after:	1 month
Sponsored by:	Dell EMC Isilon
Differential Revision:	https://reviews.freebsd.org/D15255
2018-05-06 00:43:46 +00:00
Pedro F. Giffuni
718cf2ccb9 sys/dev: further adoption of SPDX licensing ID tags.
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
2017-11-27 14:52:40 +00:00
Sepherosa Ziehau
1536a1b843 alc: Add Killer E2500 support
Reviewed by:	jhb, yongari
MFC after:	1 week
Sponsored by:	Microsoft
Differential Revision:	https://reviews.freebsd.org/D9058
2017-01-16 03:03:47 +00:00
Pyun YongHyeon
bb7e9b3046 Add a missing change in r304575.
Noticed by:	jhb
2016-08-22 03:28:06 +00:00
Pyun YongHyeon
477cba21d2 Add Killer E2400 Gigabit Ethernet support.
It seems Killer E2200/E2400 has a BIOS misconfiguration or silicon
bug which triggers DMA write errors when driver uses advertised
maximum payload size.  Force the maximum payload size to 128 bytes
in DMA configuration.
This change should fix occasional DMA write errors reported on
Killer E2200.

Tested by:	<psy0nic@sys-tek.org>
2016-08-22 01:19:05 +00:00
Pyun YongHyeon
03b4253bb8 Correct DMA channel number selection on AR816x family of
controllers. For Gigabit Ethernet version of AR816x, AR813x/AR815x
except L1D controller, use vendor recommended ASPM parameters.
While here, increase alc_dma_burst array size.  Broken H/W can
return bogus value in theory.
2016-08-22 01:06:54 +00:00
Pyun YongHyeon
9dda5c8ffc Fix variable assignment.
Found by:	PVS-Studio
2016-02-18 01:24:10 +00:00
Pyun YongHyeon
0a9aceb8ee Correct device description message. 2015-01-30 01:13:07 +00:00
Pyun YongHyeon
416f6852e3 Remove ALC_LOCK_ASSERT in alc_stop_queue(). This function is now
called in device attach without holding a driver lock so it
resulted in panic.

Reported by:	markj
2014-10-13 01:06:40 +00:00
Pyun YongHyeon
b624ef0a8e Add support for QAC AR816x/AR817x Gigabit/Fast Ethernet controllers.
These controllers seem to have the same feature of AR813x/AR815x and
improved RSS support(4 TX queues and 8 RX queues).  alc(4) supports
all hardware features except RSS.  I didn't implement RX checksum
offloading for AR816x/AR817x just because I couldn't get
confirmation from the Vendor whether AR816x/AR817x corrected its
predecessor's RX checksum offloading bug on fragmented packets.
This change adds supports for the following controllers.
 o AR8161 PCIe Gigabit Ethernet controller
 o AR8162 PCIe Fast Ethernet controller
 o AR8171 PCIe Gigabit Ethernet controller
 o AR8172 PCIe Fast Ethernet controller
 o Killer E2200 Gigabit Ethernet controller

Tested by:	Many
Relnotes:	yes
MFC after:	2 weeks
HW donated by:	Qualcomm Atheros Communications, Inc.
2014-10-08 05:47:01 +00:00
Pyun YongHyeon
0999f75a2f Fix a long standing bug in MAC statistics register access. One
additional register was erroneously added in the MAC register set
such that 7 TX statistics counters were wrong.
2014-10-08 01:03:32 +00:00
Gleb Smirnoff
9bce9009cd Mechanically convert to if_inc_counter(). 2014-09-18 21:11:42 +00:00
Gleb Smirnoff
1bffa9511f Use define from if_var.h to access a field inside struct if_data,
that resides in struct ifnet.

Sponsored by:	Nginx, Inc.
2014-08-30 19:55:54 +00:00
John Baldwin
068d8643ad Fix various NIC drivers to properly cleanup static DMA resources.
In particular, don't check the value of the bus_dma map against NULL
to determine if either bus_dmamem_alloc() or bus_dmamap_load() succeeded.
Instead, assume that bus_dmamap_load() succeeeded (and thus that
bus_dmamap_unload() should be called) if the bus address for a resource
is non-zero, and assume that bus_dmamem_alloc() succeeded (and thus
that bus_dmamem_free() should be called) if the virtual address for a
resource is not NULL.

In many cases these bugs could result in leaks when a driver was detached.

Reviewed by:	yongari
MFC after:	2 weeks
2014-06-11 14:53:58 +00:00
Pyun YongHyeon
52ee8ac027 Increase the number of TX DMA segments from 32 to 35. It turned
out 32 is not enough to support a full sized TSO packet.
While I'm here fix a long standing bug introduced in r169632 in
bce(4) where it didn't include L2 header length of TSO packet in
the maximum DMA segment size calculation.

In collaboration with:	rmacklem
MFC after:		2 weeks
2014-03-31 01:54:59 +00:00
Gleb Smirnoff
76039bc84f The r48589 promised to remove implicit inclusion of if_var.h soon. Prepare
to this event, adding if_var.h to files that do need it. Also, include
all includes that now are included due to implicit pollution via if_var.h

Sponsored by:	Netflix
Sponsored by:	Nginx, Inc.
2013-10-26 17:58:36 +00:00
Gleb Smirnoff
c6499eccad Mechanically substitute flags from historic mbuf allocator with
malloc(9) flags in sys/dev.
2012-12-04 09:32:43 +00:00
Gavin Atkinson
e935190a33 Switch some PCI register reads from using magic numbers to using the names
defined in pcireg.h

MFC after:	1 week
2012-09-19 12:27:23 +00:00
Gavin Atkinson
389c8bd51e Align the PCI Express #defines with the style used for the PCI-X
#defines.  This also has the advantage that it makes the names more
compact, iand also allows us to correct the non-uniform naming of
the PCIM_LINK_* defines, making them all consistent amongst themselves.

This is a mostly mechanical rename:
  s/PCIR_EXPRESS_/PCIER_/g
  s/PCIM_EXP_/PCIEM_/g
  s/PCIM_LINK_/PCIEM_LINK_/g

When this is MFC'd, #defines will be added for the old names to assist
out-of-tree drivers.

Discussed with:	jhb
MFC after:	1 week
2012-09-18 22:04:59 +00:00
Pyun YongHyeon
57c81d92ae Close a race where SIOCGIFMEDIA ioctl get inconsistent link status.
Because driver is accessing a common MII structure in
mii_pollstat(), updating user supplied structure should be done
before dropping a driver lock.

Reported by:	Karim (fodillemlinkarimi <> gmail dot com)
2011-10-17 19:49:00 +00:00
Pyun YongHyeon
462d5251d7 Disable PHY hibernation until I get more detailed hibernation
programming secret.  The PHY would go into sleep state when it
detects no established link and it will re-establish link when the
cable is plugged in.  Previously it failed to re-establish link
when the cable is plugged in such that it required to manually down
and up the interface again to make it work.  This came from
incorrectly programmed hibernation parameters.  According to
Atheros, each PHY chip requires different configuration for
hibernation and different vendor has different settings for the
same chip.
Disabling hibernation may consume more power but establishing link
looks more important than saving power.
Special thanks to Atheros for giving me instructions that disable
hibernation.

MFC after:	1 week
Approved by:	re (kib)
2011-08-22 20:33:05 +00:00
Pyun YongHyeon
83ad330dd5 Fix typo.
Submitted by:	brad at OpenBSD
2011-05-19 23:13:08 +00:00
Marius Strobl
3fcb7a5365 - Remove attempts to implement setting of BMCR_LOOP/MIIF_NOLOOP
(reporting IFM_LOOP based on BMCR_LOOP is left in place though as
  it might provide useful for debugging). For most mii(4) drivers it
  was unclear whether the PHYs driven by them actually support
  loopback or not. Moreover, typically loopback mode also needs to
  be activated on the MAC, which none of the Ethernet drivers using
  mii(4) implements. Given that loopback media has no real use (and
  obviously hardly had a chance to actually work) besides for driver
  development (which just loopback mode should be sufficient for
  though, i.e one doesn't necessary need support for loopback media)
  support for it is just dropped as both NetBSD and OpenBSD already
  did quite some time ago.
- Let mii_phy_add_media() also announce the support of IFM_NONE.
- Restructure the PHY entry points to use a structure of entry points
  instead of discrete function pointers, and extend this to include
  a "reset" entry point. Make sure any PHY-specific reset routine is
  always used, and provide one for lxtphy(4) which disables MII
  interrupts (as is done for a few other PHYs we have drivers for).
  This includes changing NIC drivers which previously just called the
  generic mii_phy_reset() to now actually call the PHY-specific reset
  routine, which might be crucial in some cases. While at it, the
  redundant checks in these NIC drivers for mii->mii_instance not being
  zero before calling the reset routines were removed because as soon
  as one PHY driver attaches mii->mii_instance is incremented and we
  hardly can end up in their media change callbacks etc if no PHY driver
  has attached as mii_attach() would have failed in that case and not
  attach a miibus(4) instance.
  Consequently, NIC drivers now no longer should call mii_phy_reset()
  directly, so it was removed from EXPORT_SYMS.
- Add a mii_phy_dev_attach() as a companion helper to mii_phy_dev_probe().
  The purpose of that function is to perform the common steps to attach
  a PHY driver instance and to hook it up to the miibus(4) instance and to
  optionally also handle the probing, addition and initialization of the
  supported media. So all a PHY driver without any special requirements
  has to do in its bus attach method is to call mii_phy_dev_attach()
  along with PHY-specific MIIF_* flags, a pointer to its PHY functions
  and the add_media set to one. All PHY drivers were updated to take
  advantage of mii_phy_dev_attach() as appropriate. Along with these
  changes the capability mask was added to the mii_softc structure so
  PHY drivers taking advantage of mii_phy_dev_attach() but still
  handling media on their own do not need to fiddle with the MII attach
  arguments anyway.
- Keep track of the PHY offset in the mii_softc structure. This is done
  for compatibility with NetBSD/OpenBSD.
- Keep track of the PHY's OUI, model and revision in the mii_softc
  structure. Several PHY drivers require this information also after
  attaching and previously had to wrap their own softc around mii_softc.
  NetBSD/OpenBSD also keep track of the model and revision on their
  mii_softc structure. All PHY drivers were updated to take advantage
  as appropriate.
- Convert the mebers of the MII data structure to unsigned where
  appropriate. This is partly inspired by NetBSD/OpenBSD.
- According to IEEE 802.3-2002 the bits actually have to be reversed
  when mapping an OUI to the MII ID registers. All PHY drivers and
  miidevs where changed as necessary. Actually this now again allows to
  largely share miidevs with NetBSD, which fixed this problem already
  9 years ago. Consequently miidevs was synced as far as possible.
- Add MIIF_NOMANPAUSE and mii_phy_flowstatus() calls to drivers that
  weren't explicitly converted to support flow control before. It's
  unclear whether flow control actually works with these but typically
  it should and their net behavior should be more correct with these
  changes in place than without if the MAC driver sets MIIF_DOPAUSE.

Obtained from:	NetBSD (partially)
Reviewed by:	yongari (earlier version), silence on arch@ and net@
2011-05-03 19:51:29 +00:00
John Baldwin
3b0a4aef96 Do a sweep of the tree replacing calls to pci_find_extcap() with calls to
pci_find_cap() instead.
2011-03-23 13:10:15 +00:00
Pyun YongHyeon
a280fae7c3 alc_rev was used without initialization such that it failed to
apply AR8152 v1.0 specific initialization code. Fix this bug by
explicitly reading PCI device revision id via PCI accessor.

Reported by:	Gabriel Linder ( linder.gabriel <> gmail dot com )
2011-01-31 20:00:43 +00:00
Pyun YongHyeon
f69ddfbb5f Fix logic error. Due to the bug, it incorrectly checked TXQ status
which in turn can leave TXQ active.

Submitted by:	Brad ( brad <> comstyle dot com )
MFC after:	3 days
2011-01-28 21:03:32 +00:00
Pyun YongHyeon
c27d7a76fc Correct wrong definition of PM timer mask and adjust L1/PM timer
value. While I'm here enable all clocks before initializing
controller. This change should fix lockup issue seen on AR8152
v1.1 PCIe Fast Ethernet controller.

PR:	kern/154076
MFC after:	3 days
2011-01-20 18:26:33 +00:00
John Baldwin
3b33d63074 - Move ether_ifdetach() earlier and remove now-unneeded IN_DETACH flag.
- Expand locking in interrupt handler.

Reviewed by:	yongari
2011-01-13 21:49:14 +00:00
Pyun YongHyeon
159ea02c0d Make sure to invoke unlocked foo_start since the taskqueue does not
hold a driver lock. This should fix a regression introduced in
r216925.

PR:	kern/153769
2011-01-12 22:24:07 +00:00
Matthew D Fleming
6dc7dc9a3e sysctl(9) cleanup checkpoint: amd64 GENERIC builds cleanly.
Commit the rest of the devices.
2011-01-12 19:53:56 +00:00
John Baldwin
32341ad63c Add a 'locked' variant of the foo_start() routine and call it directly
from interrupt handlers and watchdog routines instead of queueing a task
to call foo_start().

Reviewed by:	yongari
MFC after:	1 month
2011-01-03 18:28:30 +00:00
Pyun YongHyeon
7e86a37e0d Remove unecessary and clearly wrong usage of atomic(9).
Reported by:	avg, jhb, attilio
2010-12-10 21:43:20 +00:00
Pyun YongHyeon
9f4e8f4601 Enable ethernet flow-control on all alc(4) controllers. This change
should reduce a lot of dropped frames under high network load.
2010-11-26 02:10:56 +00:00
Pyun YongHyeon
d0b2f7efb7 Don't bother to enable ASPM L1 to save more power. Even though I am
not able to trigger the issue with sample boards, some users seems
to suffer from freeze/lockup when system is booted without UTP cable
plugged in. I'm not sure whether this is BIOS issue or controller
bug. This change fixes AR8132 lockup issue seen on EEE PC.

Reported by:	kmoore
Tested by:	kmoore
2010-10-30 01:12:54 +00:00
Marius Strobl
8e5d93dbb4 Convert the PHY drivers to honor the mii_flags passed down and convert
the NIC drivers as well as the PHY drivers to take advantage of the
mii_attach() introduced in r213878 to get rid of certain hacks. For
the most part these were:
- Artificially limiting miibus_{read,write}reg methods to certain PHY
  addresses; we now let mii_attach() only probe the PHY at the desired
  address(es) instead.
- PHY drivers setting MIIF_* flags based on the NIC driver they hang
  off from, partly even based on grabbing and using the softc of the
  parent; we now pass these flags down from the NIC to the PHY drivers
  via mii_attach(). This got us rid of all such hacks except those of
  brgphy() in combination with bce(4) and bge(4), which is way beyond
  what can be expressed with simple flags.

While at it, I took the opportunity to change the NIC drivers to pass
up the error returned by mii_attach() (previously by mii_phy_probe())
and unify the error message used in this case where and as appropriate
as mii_attach() actually can fail for a number of reasons, not just
because of no PHY(s) being present at the expected address(es).

Reviewed by:	jhb, yongari
2010-10-15 14:52:11 +00:00
Pyun YongHyeon
96486faa6e Make sure to not use stale ip/tcp header pointers. The ip/tcp
header parser uses m_pullup(9) to get access to mbuf chain.
m_pullup(9) can allocate new mbuf chain and free old one if the
space left in the mbuf chain is not enough to hold requested
contiguous bytes. Previously drivers can use stale ip/tcp header
pointer if m_pullup(9) returned new mbuf chain.

Reported by:	Andrew Boyer (aboyer <> averesystems dot com)
MFC after:	10 days
2010-10-14 18:31:40 +00:00
Pyun YongHyeon
cb2f3e7f9b Backout r204230. TX mbuf parser for VLAN is still required to
enable TX checksum offloading if VLAN hardware tagging is disabled.
2010-10-14 17:57:52 +00:00
Xin LI
9ed03f0231 status bits should be &'ed against status to be really functional.
Reported by:	Jike Song
Reviewed by:	yongari
MFC after:	1 week
2010-09-16 21:06:23 +00:00
Pyun YongHyeon
5bec76e720 Make sure to disable RX MAC in alc_stop_mac(). Previously there
was a logic error which it always enabled RX MAC.
2010-08-13 19:39:33 +00:00
Pyun YongHyeon
2f70ccea9f Add support for Atheros AR8151/AR8152 PCIe gigabit/fast ethernet
controller. These controllers are known as L1D(AR8151) and
L2CB/B2(AR8152). This change adds supports for the following
controllers.
 o AR8151 v1.0(L1D) gigabit ethernet controller
 o AR8151 v2.0(L1D) gigabit ethernet controller
 o AR8152 v1.1(L2CB) fast ethernet controller
 o AR8152 v2.0(L2CB2) fast ethernet controller
These controllers have the same feature of AR8131/AR8132 and
support improved power saving control. The user visible change at
this moment is reduced jumbo frame size from 9KB to 6KB. Many
thanks to Atheros for continuing to support FreeBSD.

HW donated by:	Atheros Communications, Inc.
2010-08-09 17:28:08 +00:00
Pyun YongHyeon
a4d3574ccf Cache PCIY_PMG and PCIY_EXPRESS capability pointer to softc and use
it instead of calling pci_find_extcap().
2010-08-08 00:43:41 +00:00
Pyun YongHyeon
d62fc5de93 Remove unnecessary assignment. 2010-08-08 00:23:36 +00:00
Pyun YongHyeon
47ae892c85 Always disable ASPM L0s and enable L1 before entering into WOL
suspend state.  Also disable master clock after PHY power down,
this is supposed to save more power. The master clock should be
enabled if WOL is active.
2010-08-08 00:12:31 +00:00
Pyun YongHyeon
a0bca95502 Do not touch CMB TX threshold register when CMB is not used.
Note, alc(4) does not use CMB at all due to silicon bug.
2010-08-07 23:41:46 +00:00
Pyun YongHyeon
1e77baed0d Controller does not seem to support more than 1024 bytes DMA burst.
Limit DMA burst size to be less than or equal to 1024 bytes.
2010-08-07 23:33:06 +00:00