If we fail to set up the multicast entry for pfsync and return an error
we must release the pfsync lock first.
MFC after: 2 weeks
Sponsored by: Orange Business Services
Differential Revision: https://reviews.freebsd.org/D17506
If the syncdev is removed we no longer need to clean up the multicast
entry we've got set up for that device.
Pass the ifnet detach event through pf to pfsync, and remove our
multicast handle, and mark us as no longer having a syncdev.
Note that this callback is always installed, even if the pfsync
interface is disabled (and thus it's not a per-vnet callback pointer).
MFC after: 2 weeks
Sponsored by: Orange Business Services
Differential Revision: https://reviews.freebsd.org/D17502
pfsync touches pf memory (for pf_state and the pfsync callback
pointers), not the other way around. We need to ensure that pfsync is
torn down before pf.
MFC after: 2 weeks
Sponsored by: Orange Business Services
Differential Revision: https://reviews.freebsd.org/D17501
The callbacks are installed and removed depending on the state of the
pfsync device, which is per-vnet. The callbacks must also be per-vnet.
MFC after: 2 weeks
Sponsored by: Orange Business Services
Differential Revision: https://reviews.freebsd.org/D17499
So we have a global limit of 1024 fragments, but it is fine grained to
the region of the packet. Smaller packets may have less fragments.
This costs another 16 bytes of memory per reassembly and devides the
worst case for searching by 8.
Obtained from: OpenBSD
Differential Revision: https://reviews.freebsd.org/D17734
Remember 16 entry points based on the fragment offset. Instead of
a worst case of 8196 list traversals we now check a maximum of 512
list entries or 16 array elements.
Obtained from: OpenBSD
Differential Revision: https://reviews.freebsd.org/D17733
Avoid traversing the list of fragment entris to check whether the
pf(4) reassembly is complete. Instead count the holes that are
created when inserting a fragment. If there are no holes left, the
fragments are continuous.
Obtained from: OpenBSD
Differential Revision: https://reviews.freebsd.org/D17732
When users mark an interface to not use aliases they likely also don't
want to use the link-local v6 address there.
PR: 201695
Submitted by: Russell Yount <Russell.Yount AT gmail.com>
Differential Revision: https://reviews.freebsd.org/D17633
We checked the destination address, but replaced the source address. This was
fixed in OpenBSD as part of their NAT rework, which we don't want to import
right now.
CID: 1009561
MFC after: 3 weeks
There's no point in the NULL check for ifp, because we'll already have
dereferenced it by then. Moreover, the event will always have a valid ifp.
Replace the late check with an early assertion.
CID: 1357338
the 3WHS is completed, establish the backend connection. The trigger
for "3WHS completed" is the reception of the first ACK. However, we
should not proceed if that ACK also has RST or FIN set.
PR: 197484
Obtained from: OpenBSD
MFC after: 2 weeks
when there is work to do. This reduces CPU consumption to one
third on systems. This will help keep the thread CPU usage under
control now that the default hash size has increased.
Reviewed by: kp
Approved by: re (kib)
Differential Revision: https://reviews.freebsd.org/D17097
2^32 bps or greater to be used. Prior to this, bandwidth parameters
would simply wrap at the 2^32 boundary. The computations in the HFSC
scheduler and token bucket regulator have been modified to operate
correctly up to at least 100 Gbps. No other algorithms have been
examined or modified for correct operation above 2^32 bps (some may
have existing computation resolution or overflow issues at rates below
that threshold). pfctl(8) will now limit non-HFSC bandwidth
parameters to 2^32 - 1 before passing them to the kernel.
The extensions to the pf(4) ioctl interface have been made in a
backwards-compatible way by versioning affected data structures,
supporting all versions in the kernel, and implementing macros that
will cause existing code that consumes that interface to use version 0
without source modifications. If version 0 consumers of the interface
are used against a new kernel that has had bandwidth parameters of
2^32 or greater configured by updated tools, such bandwidth parameters
will be reported as 2^32 - 1 bps by those old consumers.
All in-tree consumers of the pf(4) interface have been updated. To
update out-of-tree consumers to the latest version of the interface,
define PFIOC_USE_LATEST ahead of any includes and use the code of
pfctl(8) as a guide for the ioctls of interest.
PR: 211730
Reviewed by: jmallett, kp, loos
MFC after: 2 weeks
Relnotes: yes
Sponsored by: RG Nets
Differential Revision: https://reviews.freebsd.org/D16782
Similar to the network stack issue fixed in r337782 pf did not limit the number
of fragments per packet, which could be exploited to generate high CPU loads
with a crafted series of packets.
Limit each packet to no more than 64 fragments. This should be sufficient on
typical networks to allow maximum-sized IP frames.
This addresses the issue for both IPv4 and IPv6.
MFC after: 3 days
Security: CVE-2018-5391
Sponsored by: Klara Systems
The pfi_skip_if() function sometimes caused skipping of groups to work,
if the members of the group used the groupname as a name prefix.
This is often the case, e.g. group lo usually contains lo0, lo1, ...,
but not always.
Rather than relying on the name explicitly check for group memberships.
Obtained from: OpenBSD (pf_if.c,v 1.62, pf_if.c,v 1.63)
Sponsored by: Essen Hackathon
Synproxy was accidentally broken by r335569. The 'return (action)' must be
executed for every non-PF_PASS result, but the error packet (TCP RST or ICMP
error) should only be sent if the packet was dropped (i.e. PF_DROP) and the
return flag is set.
PR: 229477
Submitted by: Andre Albsmeier <mail AT fbsd.e4m.org>
MFC after: 1 week
When shutting down a vnet jail pf_shutdown() clears the remaining states, which
through pf_clear_states() calls pf_unlink_state().
For synproxy states pf_unlink_state() will send a TCP RST, which eventually
tries to schedule the pf swi in pf_send(). This means we can't remove the
software interrupt until after pf_shutdown().
MFC after: 1 week
Several third-parties use at least some of these ioctls. While it would be
better for regression testing if they were used in base (or at least in the
test suite), it's currently not worth the trouble to push through removal.
Submitted by: antoine, markj
Several ioctls are unused in pf, in the sense that no base utility
references them. Additionally, a cursory review of pf-based ports
indicates they're not used elsewhere either. Some of them have been
unused since the original import. As far as I can tell, they're also
unused in OpenBSD. Finally, removing this code removes the need for
future pf work to take them into account.
Reviewed by: kp
Differential Revision: https://reviews.freebsd.org/D16076
States learned via pfsync from a peer with the same ruleset checksum were not
getting assigned to rules like they should because pfsync_in_upd() wasn't
passing the PFSYNC_SI_CKSUM flag along to pfsync_state_import.
PR: 229092
Submitted by: Kajetan Staszkiewicz <vegeta tuxpowered.net>
Obtained from: OpenBSD
MFC after: 1 week
Sponsored by: InnoGames GmbH
Normally pf rules are expected to do one of two things: pass the traffic or
block it. Blocking can be silent - "drop", or loud - "return", "return-rst",
"return-icmp". Yet there is a 3rd category of traffic passing through pf:
Packets matching a "pass" rule but when applying the rule fails. This happens
when redirection table is empty or when src node or state creation fails. Such
rules always fail silently without notifying the sender.
Allow users to configure this behaviour too, so that pf returns an error packet
in these cases.
PR: 226850
Submitted by: Kajetan Staszkiewicz <vegeta tuxpowered.net>
MFC after: 1 week
Sponsored by: InnoGames GmbH
If a locally generated packet is routed (with route-to/reply-to/dup-to) out of
a different interface it's passed through the firewall again. This meant we
lost the inp pointer and if we required the pointer (e.g. for user ID matching)
we'd deadlock trying to acquire an inp lock we've already got.
Pass the inp pointer along with pf_route()/pf_route6().
PR: 228782
MFC after: 1 week
Given that PF_RULES_LOCK is a mostly read lock, replace the rwlock with rmlock.
This change improves packet processing rate in high pps environments.
Benchmarking by olivier@ shows a 65% improvement in pps.
While here, also eliminate all appearances of "sys/rwlock.h" includes since it
is not used anymore.
Submitted by: farrokhi@
Differential Revision: https://reviews.freebsd.org/D15502
This driver was for an early and uncommon legacy PCI 10GbE for a single
ASIC, Intel 82597EX. Intel quickly shifted to the long lived ixgbe family.
Submitted by: kbowling
Reviewed by: brooks imp jeffrey.e.pieper@intel.com
Relnotes: yes
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D15234
pf ioctls frequently take a variable number of elements as argument. This can
potentially allow users to request very large allocations. These will fail,
but even a failing M_NOWAIT might tie up resources and result in concurrent
M_WAITOK allocations entering vm_wait and inducing reclamation of caches.
Limit these ioctls to what should be a reasonable value, but allow users to
tune it should they need to.
Differential Revision: https://reviews.freebsd.org/D15018
Ensure that multiplications for memory allocations cannot overflow, and
that we'll not try to allocate M_WAITOK for potentially overly large
allocations.
MFC after: 1 week
These ioctls can process a number of items at a time, which puts us at
risk of overflow in mallocarray() and of impossibly large allocations
even if we don't overflow.
There's no obvious limit to the request size for these, so we limit the
requests to something which won't overflow. Change the memory allocation
to M_NOWAIT so excessive requests will fail rather than stall forever.
MFC after: 1 week
These ioctls can process a number of items at a time, which puts us at
risk of overflow in mallocarray() and of impossibly large allocations
even if we don't overflow.
Limit the allocation to required size (or the user allocation, if that's
smaller). That does mean we need to do the allocation with the rules
lock held (so the number doesn't change while we're doing this), so it
can't M_WAITOK.
MFC after: 1 week
The DIOCRADDTABLES and DIOCRDELTABLES ioctls can process a number of
tables at a time, and as such try to allocate <number of tables> *
sizeof(struct pfr_table). This multiplication can overflow. Thanks to
mallocarray() this is not exploitable, but an overflow does panic the
system.
Arbitrarily limit this to 65535 tables. pfctl only ever processes one
table at a time, so it presents no issues there.
MFC after: 1 week
This fixes 32-bit compat (no ioctl command defintions are required
as struct ifreq is the same size). This is believed to be sufficent to
fully support ifconfig on 32-bit systems.
Reviewed by: kib
Obtained from: CheriBSD
MFC after: 1 week
Relnotes: yes
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14900
Forwarded packets passed through PFIL_OUT, which made it difficult for
firewalls to figure out if they were forwarding or producing packets. This in
turn is an issue for pf for IPv6 fragment handling: it needs to call
ip6_output() or ip6_forward() to handle the fragments. Figuring out which was
difficult (and until now, incorrect).
Having pfil distinguish the two removes an ugly piece of code from pf.
Introduce a new variant of the netpfil callbacks with a flags variable, which
has PFIL_FWD set for forwarded packets. This allows pf to reliably work out if
a packet is forwarded.
Reviewed by: ae, kevans
Differential Revision: https://reviews.freebsd.org/D13715
If a user attempts to add two tables with the same name the duplicate table
will not be added, but we forgot to free the duplicate table, leaking memory.
Ensure we free the duplicate table in the error path.
Reported by: Coverity
CID: 1382111
MFC after: 3 weeks
If the user configures a states_hashsize or source_nodes_hashsize value we may
not have enough memory to allocate this. This used to lock up pf, because these
allocations used M_WAITOK.
Cope with this by attempting the allocation with M_NOWAIT and falling back to
the default sizes (with M_WAITOK) if these fail.
PR: 209475
Submitted by: Fehmi Noyan Isi <fnoyanisi AT yahoo.com>
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D14367
When INVARIANTS is not set the 'last' variable is not used, which can generate
compiler warnings.
If this invariant is ever violated it'd result in a KASSERT failure in
refcount_release(), so this one is not strictly required.
pf_unlink_state() releases a reference to the state without checking if
this is the last reference. It can't be, because pf_state_insert()
initialises it to two. KASSERT() that this is always the case.
CID: 1347140
pfioctl() handles several ioctl that takes variable length input, these
include:
- DIOCRADDTABLES
- DIOCRDELTABLES
- DIOCRGETTABLES
- DIOCRGETTSTATS
- DIOCRCLRTSTATS
- DIOCRSETTFLAGS
All of them take a pfioc_table struct as input from userland. One of
its elements (pfrio_size) is used in a buffer length calculation.
The calculation contains an integer overflow which if triggered can lead
to out of bound reads and writes later on.
Reported by: Ilja Van Sprundel <ivansprundel@ioactive.com>
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
No functional change intended.
Mainly focus on files that use BSD 3-Clause license.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
This is an import of Alexander Bluhm's OpenBSD commit r1.60,
the first chunk had to be modified because on OpenBSD the
'cut' declaration is located elsewhere.
Upstream report by Jingmin Zhou:
https://marc.info/?l=openbsd-pf&m=150020133510896&w=2
OpenBSD commit message:
Use a 32 bit variable to detect integer overflow when searching for
an unused nat port. Prevents a possible endless loop if high port
is 65535 or low port is 0.
report and analysis Jingmin Zhou; OK sashan@ visa@
Quoted from: https://cvsweb.openbsd.org/cgi-bin/cvsweb/src/sys/net/pf_lb.c
PR: 221201
Submitted by: Fabian Keil <fk@fabiankeil.de>
Obtained from: OpenBSD via ElectroBSD
MFC after: 1 week
pf_purge_thread() breaks up the work of iterating all states (in
pf_purge_expired_states()) and tracks progress in the idx variable.
If multiple vnets exist this results in pf_purge_thread() only calling
pf_purge_expired_states() for part of the states (the first part of the
first vnet, second part of the second vnet and so on).
Combined with the mark-and-sweep approach to cleaning up old rules (in
V_pf_unlinked_rules) that resulted in pf freeing rules that were still
referenced by states. This in turn caused panics when pf_state_expires()
encounters that state and attempts to access the rule.
We need to track the progress per vnet, not globally, so idx is moved
into a per-vnet V_pf_purge_idx.
PR: 219251
Sponsored by: Hackathon Essen 2017
